why was the introduction of oxygen such a big deal?

Answer:

The balanced equation would be 2H2 + O2 -> 2H2O

Explanation:

The correct balanced equation is 2H₂ + O₂  →  2H₂O, and  the correct coefficient for O₂ is 1.

Count the atoms on each side first. Next, alter one of the compounds' coefficient. Third, count the atoms once more, and then repeat steps two and three until the equation is balanced.

In the given equation, hydrogens are already balanced. To balance oxygen, multiple water with 2. Thus, equation becomes:

H₂  + O₂  →  2 H₂O

Now, oxygen is balanced, just the hydrogens got unbalanced. To balance hydrogen, multiply the hydrogen by 2 on the left side.

2 H₂ + O₂  → 2H₂O

Now the chemical equation is balanced, in which the number of oxygen and hydrogen are equal on both sides of the arrow.

Therefore, the coefficient of O₂ is 1.

Learn more about chemical equation, here:

https://brainly.com/question/7623022

#SPJ2

Answer:

Yes, Pb3(PO4)2.

Explanation:

Hello there!

In this case, according to the given balanced chemical reaction, it is possible to use the attached solubility series, it is possible to see that NaNO3 is soluble for the Na^+ and NO3^- ions intercept but insoluble for the Pb^3+ and PO4^2- when intercepting these two. In such a way, we infer that such reaction forms a precipitate of Pb3(PO4)2, lead (II) phosphate.

Regards!

Answer:

I think it's A. I'm pretty sure.

Explanation:

Answer:

Coal, oil and natural gas are called _________A. fossil fuels

Explanation:

Well i mean clothes so cells make tissues which help organs clothes can technically help you if you fall it has layers so it woulf be as a cell?

Answer:

m = 200.6 gr

Explanation:

CH2COOH : n = 3.4 mol

Mr = 12 + 2 + 12 + 2×16 + 1 = 59

n= m / Mr => m = n× Mr => m = 3.4×59 => m = 200.6 gr

Answer:

The correct answer to this is C. Trigonal Planner

Explanation:

I got it right..

Answer:

A. was the object once part of and asteroid

Explanation:

A is correct because at first asteroid's pieces fall off and burn up to enter the atmosphere and meteoroid's are small while asteroid's are big and rocky

D. Is the object made of rock? The question "Is the object made of rock?" would best confirm that the object is a meteoroid.

Meteoroids are small rocky or metallic objects that are in space and can potentially enter the Earth's atmosphere. By determining if the object is made of rock, it aligns with the characteristics of a meteoroid.

Option A, "Was the object once part of an asteroid?" does not necessarily confirm that the object is a meteoroid since meteoroids can come from various sources, not just asteroids.

Option B, "Where is the object located?" does not provide specific information about the nature of the object and can apply to comets and asteroids as well.

Option C, "Does the object orbit the sun?" is a characteristic shared by comets, asteroids, and meteoroids. It does not specifically confirm that the object is a meteoroid.

Learn more about Meteoroids at:

https://brainly.com/question/1939309

#SPJ2

Answer: Well "ordinary ice" is made from water (as we all know) and dried ice is made from carbon dioxide gas

Explanation:

•Hope this helps•

Answer:

3.54 mol

Explanation:

Step 1: Given data

Step 2: Convert "T" to Kelvin

We will use the following expression.

K = °C + 273.15

K = 45.00°C + 273.15 = 318.15 K

Step 3: Calculate the number of moles (n) of argon gas

We will use the ideal gas equation.

P × V = n × R × T

n = P × V/R × T

n = 2.50 atm × 37.0 L/(0.0821 atm.L/mol.K) × 318.15 K = 3.54 mol

Answer:  [tex]K_a[/tex] for the acid is [tex]5.75\times 10^{-5} [/tex]

Explanation:

[tex]C_6H_5COOH\rightarrow H^+C_6H_5COO^-[/tex]

 cM                    0             0

[tex]c-c\alpha[/tex]        [tex]c\alpha[/tex]          

So dissociation constant will be:

[tex]K_a=\frac{(c\alpha)^{2}}{c-c\alpha}[/tex]

Give c= 0.341 M and = 2.351

[tex]K_a=?[/tex]

[tex]pH=-log[H^+][/tex]

[tex][H^+]=10^{-2.351}=0.0044[/tex]

[tex][H^]=c\alpha=0.0044[/tex]  

[tex]K_a=\frac{(0.0044)^{2}}{0.341-0.0044}[/tex]  

[tex]K_a=5.75\times 10^{-5} [/tex]

Thus [tex]K_a[/tex] for the acid is [tex]5.75\times 10^{-5} [/tex]

Answer:

mass and speed are the two factor

Answer:

a) 2Cu(s) + S(s) → Cu₂S(s)

b) 2SO₂(g) + O₂(g) → 2SO₃(g)

c) 4HCl(aq) +  MnO₂(s) → MnCl₂(aq) + 2H₂O(l) + Cl₂(g)

d) C₆H₆(l) + 15/2 O₂(g) → 6CO₂(g) + 3H₂O(l)

Explanation:

First, we have to write the chemical formulas for reactants and products. Then, to identify which is the state of matter of each compound (liquid: l, solid: s, aqueous: aq, gas: g). Finally, we write the equation and balance the atoms.

a) Solid copper reacts with solid sulfur to form solid copper(I) sulfide.

Reactants: solid copper (Cu(s)) and solid sulfur (S(s)). Product: copper(I) sulfide (Cu₂S) because sulfur anion has two negative charges (S⁻²) and we need two copper ions with one positive charge (Cu⁺) to obtain the neutral compound.

The balanced requires a coefficient of 2 for Cu(s) to balance the 2 Cu atoms on the products side:

2Cu(s) + S(s) → Cu₂S(s)

(b) Sulfur dioxide gas reacts with oxygen gas to form sulfur trioxide gas.

Reactants: sulfur dioxide (SO₂) and oxygen gas (which is a diatomic molecule: O₂). Products: sulfur trioxide gas (SO₃(s)).

The balanced equation is:

2SO₂(g) + O₂(g) → 2SO₃(g)

We need a coefficient of 2 for SO₂ and SO₃ to balance O and S atoms.

(c) Aqueous hydrochloric acid reacts with solid manganese(IV) oxide to form aqueous manganese(II) chloride, liquid water, and chlorine gas.

Reactants: aqueous hydrochloric acid (HCl(aq)) and solid manganese (IV) oxide (MnO₂(s), because we need two oxygen anions O²⁻ to neutralize 4 positive charges in Mn IV). Products: aqueous manganese(II) chloride (MnCl₂, because we need two chloride ions Cl⁻ to neutralize two positive charges in Mn(II)), liquid water (H₂O), and chlorine gas (Cl₂, because it is a diatomic molecule).

The balanced chemical equation is:

4HCl(aq) +  MnO₂(s) → MnCl₂(aq) + 2H₂O(l) + Cl₂(g)

(d) Liquid benzene (C₆H₆) reacts with gaseous oxygen to form carbon dioxide and liquid water.

Reactants: benzene (C₆H₆) and gaseous oxygen (O₂). Products: carbon dioxide (CO₂, because C has valence IV) and liquid water (H₂O).

The balanced chemical equation is:

C₆H₆(l) + 15/2 O₂(g) → 6CO₂(g) + 3H₂O(l)

In this case, we need a coefficient of 15/2 for O₂ because on the product side there are 15 atoms of O (12 in CO₂ and 3 in H₂O).

Answer:

The correct answer is gas.

Explanation:

Gas has the highest energy in the state of matter due to how freely the molecules move. Solid matter is extremely compact, having the particles very close together and not creating a lot of movement. Without having action, there is no energy.

Hope this helps! :)

Answer:

P has a formal charge of 0

Explanation:

Essentially P is in the middle of that ion, and its valence electrons are being used with the 4 Os. Hope that makes sense or helps at least. There's good videos that talk about how this works but I can't link them in brainly

Salts with nitrates as the anion are generally soluble in water. The question isn’t quite clear: Are we being asked what precipitate would form if these solutions were mixed together? If that’s the case, the reaction would be as follows:

Li3AsO4(aq)+ Fe(NO3)3(aq) → 3LiNO3(aq) + FeAsO4(s).

It is odd that we’re given lithium arsenate dissolved in water to begin with as lithium arsenate should be insoluble. But assuming that it is water-soluble, we can obtain the net ionic equation for the formation of our precipitate:

Fe3+(aq) + [AsO4]3-(aq) → FeAsO4(s).

Our precipitate would be iron(iii) arsenate, FeAsO4.

[tex]\huge{\textbf{\textsf{{\color{pink}{An}}{\red{sw}}{\orange{er}} {\color{yellow}{:}}}}}[/tex ]

Answer:

7. Convection

8. Radiation

9. Conduction

Explanation:

Convection is when a fluid, such as air or a liquid, is heated and then travels away from the source, it carries the thermal energy along.

Radiation is the energy that is emitted by matter in the form of photons or electromagnetic waves. So, it is coming off the fire which makes it radiation.

Conduction is the process by which heat or electricity is directly transmitted through a substance when there is a difference of temperature or of electrical potential between adjoining regions, without movement of the material. Because the picture shows different temperatures, it leds to the conclusion that 9 is conduction.

I hope this helps!!

Answer:

True

Explanation:

In an alpha decay, the isotope of an element releases two protons and two neutrons. An alpha particle or helium has two protons and two neutrons and hence, in an alpha decay an alpha particle is released.

Hence, the given statement is true

Answer:

answer is D

Explanation:

3B

A sample of aluminum foil contains 9.20 x 1023 atoms, then mass of foil will be 41.24 gram.

Aluminum foil serves as a barrier to air and oxygen, which could heat up food that is cold or frozen. In the end, it is beneficial since it keeps the food's temperature, irrespective of whether it's warm or cold.

Iron and silicon make up the majority of the remaining 2.5% of aluminum foil, which gives it strength as well as puncture resistance. Between big, water-cooled chilling rollers, the molten alloy has been rolled thin as well as solidified. Two layers of foil were run through the mill simultaneously even during final rolling.

It is known that 1 mol = 6.022 × [tex]10^{23}[/tex]

and, 1 mol of aluminum = 27 g.

It is given that, count of Al atoms = 9.20 × [tex]10^{23}[/tex]

So,  9.20 × [tex]10^{23}[/tex] particle has mass = 27 /  6.022 × [tex]10^{23}[/tex]  ×  9.20 × [tex]10^{23}[/tex]

Which will be equal to 41.24gram.

Therefore, the mass of foil will be 41.24 gram.

To know more about mass

https://brainly.com/question/9177668

#SPJ1

Answer: 56.2 g of Aluminium is needed to react fully with 100 grams of sulphur.

Explanation:

To calculate the moles :

[tex]\text{Moles of solute}=\frac{\text{given mass}}{\text{Molar Mass}}[/tex]    

[tex]\text{Moles of} S=\frac{100g}{32g/mol}=3.125moles[/tex]

The balanced chemical equation is:

[tex]2Al+3S\rightarrow Al_2S_3[/tex]  

According to stoichiometry :

3 moles of [tex]S[/tex] require = 2 moles of [tex]Al[/tex]

Thus 3.125 moles of [tex]S[/tex] will require=[tex]\frac{2}{3}\times 3.125=2.08moles[/tex]  of [tex]Al[/tex]  

Mass of [tex]Al=moles\times {\text {Molar mass}}=2.08moles\times 27g/mol=56.2g[/tex]

Thus 56.2 g of Aluminium is needed to react fully with 100 grams of sulphur.

Answer:

At D: Soil erosion us the process taking place.

Soil erosion is the washing away of the Earth's or soil's top layer by eroding agents.

Answer:

A: True

Explanation:

Statement is true because chrysanthemic acid is formed naturally as a result of production of two molecules of dimethylallyl diphosphate which forms pyrophosphate ester.

Thus, it belongs to the pyrethrum family

Answer:

Baking a cake

Explanation:

Ape-x aprroved

Solution :

The balanced chemical equation are

The Catabolism of the glucose takes place in five stages :

1. Glucose + [tex]$ATP$[/tex] → glucose - [tex]$6$[/tex] - phosphate [tex]$+ ADP$[/tex]  ,  [tex]$\Delta G^0=-16.7 \ kJ/mol$[/tex]

2. Glucose - [tex]$6$[/tex] - phosphate → Fructose - [tex]$6$[/tex] - phosphate ,  [tex]$\Delta G^0=1.7 \ kJ/mol$[/tex]

3. Glucose - [tex]$6$[/tex] - phosphate + [tex]$ATP$[/tex] → [tex]$ADP$[/tex] + Fructose - [tex]$1,6- \text{biophosphate}$[/tex],  [tex]$\Delta G^0=-14.2 \ kJ/mol$[/tex]

4. Fructose - [tex]$1,6- \text{biophosphate}$[/tex]  → dihydroxyacetonephosphate + glyceraldehyde  [tex]$-3 - $[/tex] phosphate,   [tex]$\Delta G^0=23.8 \ kJ/mol$[/tex]

5. Dihydroxyacetonephosphate → glyceraldehyde  [tex]$-3 - $[/tex] phosphate , [tex]$\Delta G^0=7.5 \ kJ/mol$[/tex]

Therefore, the overall net equations

Glucose + [tex]$2ATP \rightarrow$[/tex] glyceraldehyde  [tex]$-3 - $[/tex] phosphate + [tex]$2ADP$[/tex] [tex]$\Delta G^0=2.1 \ kJ/mol$[/tex]

Answer:

1) increase

2) increase

Explanation:

Entropy is the degree of disorderliness or randomness of a system. It is the measure of the unavailable energy in a system.

Entropy increases with increase in the number of particles. If the number of particles in a system increases from left to right, the entropy of the system increases accordingly.

In reaction 1, the number of particles from left to right increased from two to three hence the entropy was increased.

In reaction 2, the number of particles from left to right increased from three to five hence the entropy was increased.

Answer:

.6250 M

The Sodium Hydroxide is the solute, and the water is the solvent.

Explanation:

mol/volume= Molarity

(25/22.99+16+1.008)/1=.6250 M.

Answer:

The answer is streak (A)

Because Streak (the colour of a mineral in its powdered form) is usually obtained by rubbing the mineral on a hard, white surface, such as a tile of unglazed porcelain, so as to yield a line, or streak, of fine powder.