Answer
Incidentally, they all form dew but because grass is closer to the soil, which maintains heat longer than the air where tree leaves are found, you will find more condensation in that region. Also, higher up the wind and sun will allow faster evaporation which makes the dew less noticable on tree leaves.
Explanation:
Preferred objects of dew formation are thus poor conducting or well isolated from the ground, and non-metallic, while shiny metal coated surfaces are poor infrared radiators. ... If the wet soil beneath is the major source of vapor, however (this type of dew formation is called distillation), wind always seems adverse.
35. Which subatomic particle has almost no mass relative to the others: the proton, the neutron or the electron?
Answer:
electron
Explanation:
it has very little mass
You have 3.00 L of a 3.12 M solution of NaCl(aq) called solution A. You also have 2.00 L of a 2.00 M solution of AgNO3(aq) called solution B. You mix these solutions together, making solution C.
Calculate the concentration (in M) of Ag+ ions in solution C.
Answer:
[tex]M=0.8M[/tex]
Explanation:
Hello!
In this case, since the presence of silver ions is in AgNO3 only, we can compute their moles by using the volume and concentration of the corresponding salt:
[tex]n_{Ag^+}=2.00L*2.00\frac{mol}{L}=4molAg^+[/tex]
Next, since the total volume of solution C is 5.00 L, the required concentration of silver ions turn out:
[tex]M=\frac{4.00mol}{5L} =0.8M[/tex]
Best regards!
what does the changing the Aperture do when taking a photo? *
4.What effect can you get from using a slow shutter speed? *
5.What effect can you create by using a quick shutter speed
Answer:
Slower shutter speeds like 1/60 second and slower cause a blurring effect. If you want to take a picture using a slow shutter speed, it is best to mount the camera on a tripod and use image stabilization (such as SteadyShot® technology) to reduce the chance of any unwanted camera movement.
The first big effect of it is motion blur. If your shutter speed is long, moving subjects in your photo will appear blurred along the direction of motion. ... If you use an especially fast shutter speed, you can eliminate motion even from fast-moving objects, like birds in flight, or cars driving past.
Explanation:
The percent by mass of Ca in CaCl2 is equal to
1. (40/111) x 100
2. (111/40) x 100
3. (3/1) x 100
4. (1/3) x 100
Answer:
(40/111)×100Here is a bonus Answer✍️✍️Percent composition by elementElement Symbol Mass PercentChlorine Cl 63.888%Calcium Ca 36.112Mass percentage does not have any unit as numerator and denominator contains the same unit. The percent by mass of Ca in CaCl[tex]_2[/tex] is equal to (40/111) x 100. The correct option is option A.
What is percentage by mass?Mass percentage represents the the percentage of each element that is making a particular compound.
Mathematically,
Percentage of mass = (component’s mass ÷ total mass) x 100%
Atomic weight of different element of calcium chloride{ CaCl[tex]_2[/tex]} are
Ca = 40 ; Cl = 35
Total mass of Calcium element in calcium chloride = 40g/mol
Total mass of Chlorine atom in calcium chloride = 35× 2= 71g/mol
Total molar mass of calcium phosphate = 40 +71= 111g/mole
Percentage of calcium in calcium chloride =40÷111 = 36%
Therefore, the percent by mass of Ca in CaCl2 is equal to (40/111) x 100. The correct option is option A.
To learn more about mass percentage, here:
https://brainly.com/question/27429978
#SPJ2
What is the mass of 8.8 x 10^22 of magnesium
Answer:
0.05
moles
Explanation:
In a mole of any substance, there exist
6.02⋅1023
units of that substance.
So here, we got:
3.01⋅1022Mg atoms⋅1mol6.02⋅1023M gatoms=0.05mol
Shifts in the rock layer locations cannot account for gaps in the rock record
true or false
Answer: That would be false because it is the contact between two layers representing a gap in the geologic record, usually from the erosion of the layers which would normally be expected to appear.
Explanation:
Have a good day
I hope this helps if not sorry :(
Stay motivated
Use scientific notation to express the number 355000 to:
1) one significant figure
2) two significant figures
3) three significant figures
4) four significant figures
5) six significant figures
Answer:
1) 4*10^5
2) 3.6*10^5
3) 3.55*10^5
4) 3.550*10^5
5) 3.55000*10^5
Explanation:
1) 4 x [tex]10^5[/tex]
2) 3.6 x [tex]10^5[/tex]
3) 3.55 x [tex]10^5[/tex]
4) 3.550 x [tex]10^5[/tex]
5) 3.55000 x [tex]10^5[/tex]
What is scientific notation?A number is written in scientific notation when there is a number greater than or equal to 1 1 11 but less than 10 10 1010 multiplied by a power of 10 10.
Significant figures are the number of digits in a value, often a measurement, that contributes to the degree of accuracy of the value.
1) 4 x [tex]10^5[/tex]
2) 3.6 x [tex]10^5[/tex]
3) 3.55 x [tex]10^5[/tex]
4) 3.550 x [tex]10^5[/tex]
5) 3.55000 x [tex]10^5[/tex]
Learn more about scientific notation here:
https://brainly.com/question/18073768
#SPJ2
Using the data below, calculate the enthalpy for the combustion of C to CO
C(s) + O2(g)--> CO2 (g) ΔH1 = -393.5 kJ
CO(g) + 1/2O2(g) -->CO2(g) ΔH2= -283.0kJ
Target: C(s) + 1/2O2(g) --> CO(g) ΔH3=??
Group of answer choices
Answer:
ΔH3 = -110.5 kJ.
Explanation:
Hello!
In this case, by using the Hess Law, we can manipulate the given equation to obtain the combustion of C to CO as shown below:
C(s) + 1/2O2(g) --> CO(g)
Thus, by letting the first reaction to be unchanged:
C(s) + O2(g)--> CO2 (g) ; ΔH1 = -393.5 kJ
And the second one inverted:
CO2(g) --> CO(g) + 1/2O2(g) ; ΔH2= 283.0kJ
If we add them, we obtain:
C(s) + O2(g) + CO2(g) --> CO(g) + CO2 (g) + 1/2O2(g)
Whereas CO2 can be cancelled out and O2 subtracted:
C(s) + 1/2O2(g) --> CO(g)
Therefore, the required enthalpy of reaction is:
ΔH3 = -393.5 kJ + 283.0kJ
ΔH3 = -110.5 kJ
Best regards!
Explain how kingdoms and domains are different.
Answer: A domain is a taxonomic category above the kingdom level. The three domains are: Bacteria, Archaea, and Eukarya, which are the major categories of life. Essentially, domains are superkingdoms. A kingdom is a taxonomic group that contains one or more phyla. The four traditional kingdoms of Eukarya include: Protista, Fungi, Plantae, and Animalia.
Explanation:
Answer:
A domain is a taxonomic category above the kingdom level. The three domains are: Bacteria, Archaea, and Eukarya, which are the major categories of life. ... A kingdom is a taxonomic group that contains one or more phyla. The four traditional kingdoms of Eukarya include: Protista, Fungi, Plantae, and Animalia.
Explanation:
hope you get a good grade lol I'm in FLVS and this was one of my questions :D
What do you think is the common link between each of the phenomena shown?
Answer:
sounds wave
Explanation:
From alarm, microwave, laser, TV, water waves and a musical instrument, everything release sounds.
(Not the same)
If it convinced you please add this in the brainlist
CAN YOU PLZ HELP ME ITS TIMED BRAINLIEST!
ONLY ANSWER IF YOU KNOW THE ANSWER PLZ!
The diagram shows two chromosomes paired up.
Which process is being shown?
sexual reproduction
independent assortment
crossing over
chromosome separation
Answer:
the sexual reproduction
Explanation:
Copper(I) complexes tend to be tetrahedral rather than octahedral or square planar. Why is this the case? Explain your reasoning.
Answer:
The ion is d^10
Explanation:
Tetrahedral geometry is one in which the central atom/ion is located at the center of four ligands positioned at the corners of a tetrahedron.
It is different from a square planar complex wherein the ligands are positioned at the corners of a square with the central atom/ion at the center of the square.
Tetrahedral complexes are more common with d^10 species.The electronic configuration of Cu I is [Ar]3d104s1. Hence, a tetrahedral geometry is preferred over a square planar geometry.
Which equation best represents the balanced net ionic equation for the reaction that occurs when aqueous solutions of lithium phosphate and magnesium nitrate are mixed?
Answer:
2 PO₄³⁻(aq) + 3 Mg²⁺(aq) ⇒ Mg₃(PO₄)₂(s)
Explanation:
Let's consider the molecular equation that occurs when aqueous solutions of lithium phosphate and magnesium nitrate are mixed.
2 Li₃PO₄(aq) + 3 Mg(NO₃)₂(aq) ⇒ 6 LiNO₃(aq) + Mg₃(PO₄)₂(s)
The complete ionic equation includes all the ions and insoluble species.
6 Li⁺(aq) + 2 PO₄³⁻(aq) + 3 Mg²⁺(aq) + 6 NO₃⁻(aq) ⇒ 6 Li⁺(aq) + 6 NO₃⁻(aq) + Mg₃(PO₄)₂(s)
The net ionic equation includes only the ions that participate in the reaction and insoluble species.
2 PO₄³⁻(aq) + 3 Mg²⁺(aq) ⇒ Mg₃(PO₄)₂(s)
is na2o a element or compound
Answer:
Its a compound :PP
Explanation:
have a good day
Answer:
Compound
Explanation:
If repeated measurements agree closely but differ widely from the
accepted value,
these measurements are
neither precise nor accurate.
accurate, but not precise.
both precise and accurate.
precise, but not accurate.
Answer:
precise but not accurate
Explanation:
precision is getting the same answer over and over, but not necessarily correct.
accuracy is getting the exact, or VERY close to exact, value
since the question states the repeated measurements agree closely it is saying it is precise, but when it says differ widely from accepted value it is saying NOT accurate.
How many molecules of glucose (C6H12O6,M=180.18g/mol) are contained in 144mL of 0.280 M glucose solution?
Volume of Glucose solution = 144 mL OR 0.144 L
Molarity of Glucose solution = 0.280 M
Number of moles of Glucose in the solution:From the definition of Molarity, we know that:
Molarity = number of moles / volume(in L)
in this equation, multiplying both sides by Volume, we get:
number of moles = Molarity*Volume(in L)
replacing the variables
Number of moles = 0.280*(0.144L)
Number of moles = 0.04
Number of Molecules in the solution:
We know that:
Number of molecules = Number of Moles * Avogadro's number
Number of molecules = 0.04 * 6.022 * 10²³
Number of molecules = 0.24088 * 10²³
Number of molecules = 2.4088 * 10²²
Therefore, there are 2.4088 * 10²² molecules of Glucose in the given solution
Why is it important to know which category of microorganism has caused an infection?
Select one:
a. Treatment depends on which kind of organism caused the infection.
b. Probiotic infections can actually worsen some conditions.
c. Some infections can indicate cancer.
d. Some types of infections are highly contagious.
PLEASE ANSWER QUICKLY
Answer:
A
Explanation:
FeO+ PdF2 ---> FeF2+PdO balance please worth 50 points
Answer: FeO
Explanation:
Answer:
This is not worth 50 points liar
Explanation:
Help lol please lol thank you :)
Answer:
45
Explanation:
Answer:
45 lol
Explanation:
What word is used to refer to a group of organ systems working together? organism cell tissue organ
Organism word is used to refer to a group of organ systems working together. Hence, option A is correct.
What is a cell?In biology, the smallest unit can live on its own and that makes up all living organisms and the tissues of the body.
An organ system is two or more organs working together to perform a specialized function.
Hence, organism word is used to refer to a group of organ systems working together.
Learn more about cell here:
https://brainly.com/question/14957605
#SPJ2
In metallic bonding, the electrons A. are unable to move. B. are shared between two single atoms. C. are given to one atom by another atom. D. are in a "sea" around the protons of all the metal atoms.
Answer: I think it’s A.
Explanation:
Tell me if it’s wrong sorry, I am only in middle school level science.
How many mL of O2 at STP are produced from 1.5 g KClO3
Answer:
64.2 L
i watch videos about this stuff because my grades were very low now im bringing the up
Explanation:
In order to be able to calculate the volume of oxygen gas produced by this reaction, you need to know the conditions for pressure and temperature.
Since no mention of those conditions was made, I'll assume that the reaction takes place at STP, Standard Temperature and Pressure.
STP conditions are defined as a pressure of
100 kPa
and a temperature of 0∘C
. Under these conditions for pressure and temperature, one mole of any ideal gas occupies
22.7 L
- this is known as the molar volume of a gas at STP.
So, in order to find the volume of oxygen gas at STP, you need to know how many moles of oxygen are produced by this reaction.
The balanced chemical equation for this decomposition reaction looks like this
2KClO3(s]heat×−−−→2KCl(s]+3O2(g]↑⏐
Andesitic rock is an igneous rock with a composition in between that of basaltic and granitic igneous rock.
true or false
I need to know the weighted average please!
Answer:
63.5456 amu
Explanation:
[tex]0.6917*62.9296+0.3083*64.9278= 63.5456\ amu[/tex]
How many significant figures
are in this number?
21.00
Answer:
4
Explanation:
the significant figures are 2 1 0 0
Help with this question pleasee
Magnesium bromide is an ionic compound with the chemical form MgBr2 what does the 2 tell you
Answer:
The number of Bromine combining magnesium
Explanation:
The subscript gives the number of atom/s combining to form a compound. For this problem, 1 atom of Mg combines with 2 atoms of Br.
To form the ionic combine, Mg will lose two electrons. A bromine atom requires just one electron to have a complete octet. So, two bromine atoms will be needed to complete the bonding process.
Therefore, Mg loses two electrons to two Br atoms and the electrostatic attraction from the charges created forms the ionic bond.
The number 2 represents the number of bromine atoms.
An ionic compound is formed when the complete transfer of electrons takes place from one element (usually metals) to another element (usually non-metals).The element losing electron (metal) forms a positive ion known as a cation while the element gaining electron (non-metal) forms a negative ion known as an anion.Magnesium bromide is formed by the combination of magnesium (metal) and bromine (non-metal).
The valency of magnesium is 2 while that of bromine is 1. To form a neutral compound 2 moles of bromine ion combines with 1 mole of magesium ion.
Thus, the number 2 represents the number of bromine atoms.
Learn more about ionic compounds: https://brainly.com/question/9167977
Why are standard electrode potentials usually measured at 1.0 M electrolyte concentration?
Answer:
To avoid variation due to concentration
Explanation:
Hope this helps :)
Write the charge balance for an aqueous solution of arsenic acid, H3AsO4, in which the acid can dissociate to H2AsO24 , HAsO24 2, and AsO34 2. Look up the structure of arsenic acid in Appendix G and write the structure of HAsO24 2.
Answer:
Kindly check the explanation section.
Explanation:
When the Arsenic acid,H3AsO4 is put in water it dissociates to form or give out 1 proton, 2 protons or 3 protons that is 1H^+, 2H^+ and 3H^+. Check the equation showing the dissociation reactions as given below;
H3AsO4 ===========> H^+ + AsO4^-
H3AsO4 ===========> 2H^+ + AsO4^2-
H3AsO4 ===========> 3H^+ + AsO4^3-
Therefore, the total charge balance is given as:
[H^+] =[OH^-] + [ AsO4^-] + 2[ AsO4^2-] + 3[ AsO4^3-].
Kindly note that the [OH^-] is from water.
List three things, other than the name, symbol, atomic number, and average atomic mass, you can discover about an element using the periodic table in Figure 6.9.
Answer: State of matter, Subcategory in the metal-metalloid-nonmetal trend, and electrons per shell.
Explanation: