Why is it wrong to sat that we are generating power of consuming power ​

Both Technician A and Technician B are correct.

The purpose of the Pre-Delivery Service is indeed to inspect and identify any problems before delivering the vehicle to the customer, ensuring that it is functionally and visually ready for delivery. This includes checking various components and systems to ensure they are in proper working order and that the vehicle meets the required standards.

Technician B is also correct in stating that the Pre-Delivery Service is performed based on the standards published in a Pre-Delivery Service Bulletin specific to each vehicle model and model year.

These bulletins provide detailed instructions and guidelines for conducting the pre-delivery service, outlining the specific checks, adjustments, and inspections that need to be performed on the vehicle.

Therefore, both technicians are accurate in their descriptions of the purpose and process of the Pre-Delivery Service. It is important to follow the prescribed standards and guidelines to ensure consistency and quality in preparing the vehicle for customer delivery.

For more questions on Pre-Delivery Service, click on:

https://brainly.com/question/31863805

#SPJ8

The sudden reduction in engine noise that passengers may notice after takeoff is a normal part of the takeoff process and is done to make the flight more efficient and comfortable.

The sudden reduction in engine noise or thrust that passengers sometimes hear and feel shortly after takeoff is due to a reduction in engine power as the airplane reaches a certain altitude and speed. This is a normal part of the takeoff process and is known as the "reduction in takeoff thrust" or "thrust reduction".

During takeoff, the aircraft's engines produce a high amount of thrust to get the airplane off the ground and up to a safe altitude. Once the airplane reaches a certain altitude and speed, the pilot reduces the engine power to a lower setting, which is more efficient and produces less noise. The reduction in power is often noticeable to passengers, as the noise and vibration from the engines decrease.

The exact timing of the thrust reduction can vary depending on the airplane type, airline procedures, and other factors. In some cases, the thrust reduction may occur shortly after takeoff, while in other cases, it may occur a few minutes later.

Learn more about airplanes here:

https://brainly.com/question/26868878

#SPJ1

Neither Technician A nor Technician B is entirely correct regarding the Walkaround Inspection.

The Walkaround Inspection is a systematic procedure that aims to ensure the safety and proper functioning of a vehicle. It is not primarily designed to save time but rather to identify any potential issues or hazards. Efficiency is important, but it should not compromise thoroughness.

As for Technician B's statement, while it is common practice to perform the inspection in a specific order, such as starting at the driver's door and ending at the front of the vehicle, there is no strict requirement to follow a counter-clockwise direction. The order may vary depending on the individual or the organization's preferences.

In summary, the Walkaround Inspection should be performed diligently and without rushing, focusing on thoroughly examining various aspects of the vehicle for safety and functionality. It is important to prioritize accuracy and attention to detail rather than strictly adhering to specific time-saving techniques or a fixed direction.

For more questions on hazards, click on:

https://brainly.com/question/30090471

#SPJ8

Where the above conditions are ogiven, the power required for a single inhalation is approximately 0.00141 W.

To estimate the power required for a single inhalation, we need to calculate the force and velocity of the air flowing through the trachea.

Assumptions:

We assume that the air can be treated as an incompressible fluid.

We assume that the air flow is laminar.

We assume that the trachea is a straight pipe with a constant diameter of 10 mm (since the cross-sectional area is 125 mm^2).

We neglect any frictional losses due to the presence of the walls of the trachea.

First, let's calculate the velocity of the air. We know that the tidal volume is 0.5 liters, which is equivalent to 500 ml or 0.0005 m^3. This volume is breathed in within 1.5 seconds, so the flow rate of air through the trachea is:

Q = V/t = 0.0005 m^3 / 1.5 s = 0.000333 m^3/s

The cross-sectional area of the trachea is 125 mm^2, which is equivalent to 0.000125 m^2. Using the continuity equation for incompressible fluids, we can relate the flow rate of air to its velocity:

Q = A x v

where A is the cross-sectional area of the trachea and v is the velocity of the air. Solving for v, we get:

v = Q/A = 0.000333 m^3/s / 0.000125 m^2 = 2.664 m/s

Now that we have the velocity, we can calculate the force of the air using the equation:

F = ρ x A x v^2 / 2

where ρ is the density of air, which we can assume to be 1.2 kg/m^3 (at standard conditions of temperature and pressure). Substituting the values, we get:

F = 1.2 kg/m^3 x 0.000125 m^2 x (2.664 m/s)^2 / 2 = 0.000530 N

Finally, we can calculate the power required for a single inhalation using the equation:

Power = Force x Velocity

Substituting the values, we get:

Power = 0.000530 N x 2.664 m/s = 0.00141 W

Therefore, the power required for a single inhalation is approximately 0.00141 W.

Learn more about power at:

https://brainly.com/question/1634438

#SPJ1

Answer: 50.1 micrograms.

Explanation: A sample of radium-226 with an initial mass of 20 mg was analyzed. The half-life of radium-226 is 1600 years. Using the exponential decay formula for radium-226, we calculated the amount of radium-226 remaining after 3200 years to be approximately 1.33 x 10^18 atoms, which corresponds to a mass of 50.1 micrograms.

The correct option is: The "Check Sheet" may have hyperlinks to Repair Manual procedures.

The statement that is incorrect is "The "Check Sheet" may have hyperlinks to Repair Manual procedures." The "Check Sheet" typically does not have hyperlinks to Repair Manual procedures.

The purpose of the "Check Sheet" is to provide a checklist of specific tasks and inspections that need to be performed during the Pre-Delivery Service (PDS) process.

It serves as a guide for technicians to ensure that all necessary operations are completed before delivering a vehicle to a customer.

While the "PDS Bulletin" (master document) for the vehicle serviced may include a hyperlink to the PDS "Check Sheet," it does not mean that the "Check Sheet" itself contains hyperlinks to Repair Manual procedures.

The "Check Sheet" is generally a printed document or a digital form that technicians follow, referring to relevant sections of the Repair Manual separately if needed.

Therefore, the statement that the "Check Sheet" may have hyperlinks to Repair Manual procedures is incorrect.

For more questions on Pre-Delivery Service, click on:

https://brainly.com/question/31863805

#SPJ8

Answer:

Primary power in welding is often referred to as the input line voltage and amperage available to the welding machine from the shop’s main power line. It is often expressed in watts or kilowatts (KW) and is typically AC. It can be either single-phase or three-phase. None of the options you mentioned are correct definitions of primary power in welding.

Examples of wheel and axle machine​ are car, ferris wheel Bicycle, Screwdriver and crane

The wheel and axle is a simple machine that consists of a wheel attached to a smaller axle, which turns with the wheel. The axle provides a mechanical advantage, allowing a smaller force to be used to turn a larger force, making it an important machine in a wide range of applications. Here are some examples of wheel and axle machines:

Bicycle: The bicycle is a classic example of a wheel and axle machine. The wheel acts as the larger wheel, while the pedals and chain system turn the smaller axle, which is connected to the rear wheel, providing the necessary force to move the bike.

Cars: A car has multiple wheel and axle systems, including the gears and driveshaft. The engine turns the crankshaft, which powers the transmission, which then turns the drive shaft, which in turn spins the wheels.

Ferris wheel: A ferris wheel is a large wheel that rotates around an axle. The passengers sit in seats that are attached to the outer edge of the wheel, allowing them to enjoy a panoramic view while the wheel turns.

Windmills: Windmills use a wheel and axle system to turn the blades and generate power. The blades are attached to the axle, which is connected to a rotor, turning the generator and creating electricity.

Screwdriver: A screwdriver is a simple tool that uses a wheel and axle system. The handle acts as the wheel, while the shaft of the screwdriver acts as the axle, allowing you to turn screws with ease.

Crane: A crane uses a wheel and axle system to lift heavy objects. The pulleys and cables work together to turn the large wheel, which provides the necessary force to lift the load.

Learn more about wheel and axle machine​

at https://brainly.com/question/11567835

#SPJ1

Answer:

3. A machine with a greater effort distance

Explanation:

According to the formula for calculating mechanical advantage (MA) in simple machines, which is given by MA = Load distance / Effort distance, a larger effort distance would result in a larger mechanical advantage. This means that with a larger effort distance, a given amount of effort would be able to overcome a larger load.

3. A machine with a longer effort distance: This would presumably need less work since the effort is delivered over a longer distance, resulting in a bigger mechanical advantage and requiring less effort to move the load.

The spark-ignition-piston engine, also known as the Otto Cycle, is a type of internal combustion engine that is commonly used in automobiles, motorcycles, and small aircraft. It works by converting the chemical energy stored in the fuel into mechanical energy through a series of four strokes or cycles.

These cycles are:

Intake Stroke: The piston moves downward, drawing in a mixture of air and fuel into the cylinder through the open intake valve.

Compression Stroke: The intake valve closes, and the piston moves upward, compressing the air-fuel mixture to a high pressure and temperature.

Power Stroke: A spark ignites the compressed mixture, causing a rapid expansion of gases that push the piston downward with great force. This is the stroke where the engine generates power.

Exhaust Stroke: The piston moves upward again, expelling the burned gases through the open exhaust valve.

These four strokes constitute a complete engine cycle, and the process repeats itself for every revolution of the crankshaft. In addition to these four strokes, there is a fifth step which is the charge preparation or "induction" step. During this step, the fuel and air mixture is prepared and delivered to the cylinder, either through a carburetor or a fuel injection system.

Overall, the Otto Cycle works by harnessing the energy released by the controlled explosion of the air-fuel mixture in the power stroke to generate rotational motion of the crankshaft, which can be transferred to the wheels of a vehicle or used to power other machinery. The efficiency and power output of the engine are affected by several factors, including the compression ratio, fuel quality, ignition timing, and exhaust system design.

Learn more about spark on;

https://brainly.com/question/30046932

#SPJ1