Why is important to only change one variable in a controlled experiment

Answers

Answer 1

A variable within a scientific experiment is something that is changed (i.e. it varies). There should be only one manipulated variable within a scientific experiment so that the experimenter can be certain it is this variable which causes a pattern in the resultant data, if any exists at all.

HOPE IT HELPS PLZ BRAINLIEST


Related Questions

can someone please help me

Answers

astonishing, necessary

Determine the number of significant figures in each of the following
a. 0.00376 ______
b. 1.00377 ______
c. 43,000 ______
d. 14.06 ______
e. 14.00 ______
f. 3200.0 ______​

Answers

Answer:

A. 3 Significant Figures

B. 6 Significant Figures

C. 2 Significant Figures

D. 4 Significant Figures

E. 4 Significant Figures

F. 5 Significant Figures

Explanation:

The electron configuration 1s22s22p63s23p64s23d104p3 represents which element?

Answers

Explanation:

Arsenic.................

The electron configuration 1s22s22p63s23p64s23d104p3 represents Arsenic.

The electronic configuration is represented as follows;

1s²2s²2p⁶3s²3p⁶4s²3d¹⁰4p³.

Count the number of electrons to know the element. The number of electron in an electronically neutral atom is equal to the number of proton.

The number of proton is the atomic number of the element. Therefore,

2 + 2 + 6 + 2 + 6 + 2 + 10 + 3 = 33

The atomic number is 33. The element with atomic number of 33 is Arsenic. Therefore, the element is Arsenic.

read more: https://brainly.com/question/2479123?referrer=searchResults

For the masses and volumes indicated, calculate the density in grams per cubic centimeter.
a. mass = 4.53 kg; volume = 225cm^3
b. mass = 26.3 g; volume = 25.0 mL
c. mass = 1.00 lb; volume = 500. cm^3
d. mass = 352 mg; volume = 0.271 cm^3

Answers

The answer would be C have a good day

Explaination

The masses and volumes indicated, calculate the density in grams per cubic centimeter mass = 1.00 lb; volume = 500. cm^3. Thus option c is correct.

What is density?

Density is defined as a material is the measure of how densely it is packed together.

It can also be defined as a measure of the density of a substance or object's mass.

The SI unit of density is kilogram per cubic meter or gram per cubic meter

Density can be expressed as

Density = mass / volume

Density = 1.00 / 500

Density = 0.002 lb / cm^3

Thus, the masses and volumes indicated, calculate the density in grams per cubic centimeter mass = 1.00 lb; volume = 500. cm^3. Thus option c is correct.

To learn more about density, refer to the link below:

https://brainly.com/question/15164682

#SPJ5

hroughout the reflection, make sure you have a copy of the Student Guide and your data table. Choose the terms that complete the statements. In this lab, you determined the combination of humidity, air temperature, and air pressure that create weather patterns. is the amount of water vapor in the air compared to the amount of water vapor the air can actually hold. is a measure of how hot or cold the air is, and is the force exerted per unit area by the particles in the air. These conditions influence weather patterns.

Answers

Answer:

A. relative humidity B. air temperature C. air pressure D. atmospheric

Explanation:

just completed the assignment

Answer:

Basically reconfirming what the other guy said

Explanation:

Relative humidity

Air temperature

Air pressure
Atmostpheric

Yall have a nice day.

Draw a second resonance structure for the following ion (be sure to include the charges and all lone pairs)... + ..N=N=N <-------------->.. ..

Answers

Answer:

Explanation:

Resonance structure occurs in an organic compound that undergoes resonance effects. This resonance effect is sometimes called the mesomeric effect helps to increases the stability of organic compounds that have alternating single bonds and double bonds.

The second resonance structure diagram for the ion given in the question can be found in the attached diagram below.

The solar wind is made up of ions, mostly protons, flowing out from the Sun at 400 km/s. Near Earth, each cubic kilometer of interplanetary space contains, on average, 6 x 10^15 solar-wind ions. How many moles of ions are in a cubic kilometer of near-Earth space?

Answers

Answer:

9.96x10⁻⁹ moles of ions are in a cubic kilometer

Explanation:

As the problem states, in the near-earth space there are 6x10¹⁵ ions.

Moles are an amount of substance defined as 6.022x10²³. 1 mole of ions are 6.022x10²³ ions

1 mole of substance is 6.022x10²³ particles.

As there are 6x10¹⁵ ions in a cubic kilometer, the moles are:

6x10¹⁵ ions * (1mol / 6.022x10²³ ions) =

9.96x10⁻⁹ moles of ions are in a cubic kilometer

Based on the formula for calculating moles of particles, there are 9.96 * 10⁻⁹ moles of ions in a cubic kilometer of  interplanetary space.

What is the moles of ions?

The moles of ions is determined using the formula below:

Moles of a particle = number of particles / 6.02 * 10²³

Data provided:

Number of ions = 6 * 10¹⁵ ions

Moles of ions =  6 * 10¹⁵ ions/6.02 * 10²³

moles of ions = 9.96 * 10⁻⁹ moles of ions.

Therefore, there are 9.96 * 10⁻⁹ moles of ions in a cubic kilometer of  interplanetary space.

Learn more about moles at: https://brainly.com/question/15356425

What are formed when particles in solar wind travel along lines of Earth's magnetic field and collide with gas atoms?

Answers

Answer: Auroras

Explanation:

Hope this helps

Answer:

Option Auroras is correct

Explanation:

I got it right.

Which of the following elements is a metalloid? A. vanadium (V) B. radon (Rn) C. silicon (Si) D. rubidium (Rb)

Answers

Answer:

silicon

Explanation:

What phase(s) of matter are the elements in Main Group 8?

Answers

Answer:

Solids.

Explanation:

Group 8 on the Periodic Table consists of transition metals:

- Fe (Iron)

- Ru (Ruthenium)

- Os (Osmium)

- Hs (Hassium)

Usually, transition metals are solids.

what is the order of technological design

Answers

Explanation:

steps of the technological design process include: identify a problem, research the problem, generate possible solutions, select the best solution, create a model, test the model, refine and retest the model as needed, and communicate the final solution.

name one benifit and one limitation of comparative investigations​

Answers

Answer:

Limitation of comparative investigation is that when it is done on a huge population, huge amount cost is required. Explanation: Benefit of comparative investigation is that we can get descrete information about specific breed or species. It is important for the study of behaviour of many organisms.

Explanation:

When two or more substances blend but do not chemically combine it is a _____________.

Answers

Answer:

Mixture.

Explanation:

Hello,

In this case, when blending we are continuously sliding the substances until we obtain small particles that when do not chemically but physically combine we say they are forming a mixture. Nevertheless, when they chemically combine they form a chemical compound due to the formation of bonds between them.

Regards.

How many constitutionally isomeric monochlorination products are possible from the following?a. 2-Methylpentane b. 3-Methylpentane c. 2,2-Dimethylbutane d. 2,3-Dimethylbutane

Answers

Answer:

a. 5

b. 4

c. 3

d. 2

Explanation:

How many constitutionally isomeric monochlorination products are possible from the following?

a. 2-Methylpentane

In 2-methylpentane, there are five possible monochlorinated substitutional products in the reaction of chlorination of 2-methylpentane in the presence of sunlight.

b. In 3-methylpentane there are four possible monochlorinated substitutional products in the reaction of chlorination of 3-methylpentane in the presence of sunlight.

c. In 2,2-Dimethylbutane there are three possible monochlorinated substitutional products in the reaction of chlorination of 2,2-Dimethylbutane in the presence of sunlight.

d. In 2,3-Dimethylbutane there are two possible monochlorinated substitutional products in the reaction of chlorination of 2,3-Dimethylbutane  in the presence of sunlight.

Psychoanalysis (Freud) is concerned with Question 1 options: chemical balances in the brain someone's measurable actions childhood trauma Self-actualization

Answers

Answer:

childhood trauma.

Explanation:

I took the test and the answer i got correct was Childhood trauma.

Which of the following is an example of element? A.Water B.Chlorine C.Carbon Dioxide D.Sugar

Answers

The answer is B chlorine. Chlorine is and elements and the others are compounds.

Benzene has a heat of vaporization of 30.72 kj/mol and a normal boiling point of 80.1 oC. At what temperature does benzene boil when the external pressure is 490 torrtorr?

Answers

Answer:

THE TEMPERATURE AT THE EXTERNAL PRESSURE OF 490 TORR IS 550.72 C

Explanation:

Heat of vaporization = 30.72 kj/mol

Normal boiling point = 80.1 C

Pressure = 490 torr

So therefore, with the above variables given, the relationship between heat of vaporization, pressure and temperature is given by this equation:

ln (P2/P1) = - ^H vap/ R ( 1/ T2 - 1/T1)

H vap = 30.72 kj/mol

P1 = 760 torr ( this is so because the normal boiling point occurs at the vapor pressure equal to the atmospheric pressure which value is 760 torr)

T1 = 80.1 + 273 = 353.1 K

P2 = 490 torr

R = 8.314 J/mol K

T2 = unknown

Re-arranging the formula bu=y making T2 the subject of the equation, we have;

T2 = 1 / (1/T1) - (R / Hvap) (ln (P2/P1))

Introducing the variables into the equation, we have:

T2 = 1 / (1 / 353.1 ) - (8.341 / 30.72 * 10 ^3) ln (490 / 760)

T2 = 1/ (0.00283 - 0.27* 10^-3 ln 0.6447)

T2 = 1 / 0.00283 - 0.27*10^-3 (- 0.43897)

T2 = 1 / 0.00283 + 0.1185 * 10 ^-3

T2 = 1 / 0.1214 *10^-3

T2 = 1 / 0.001214

T2 = 823.72

T2 = 823.72 - 273 = 550.72 C

The temperature when the external pressure is 490 torr is 550.72 C

Causes warm air to rise in the atmosphere. is what type of heat transfer?

Answers

Answer: Convection

Explanation: Convection is the transfer of heat energy in a fluid. This type of heating is most commonly seen in the kitchen with a boiling liquid. Air in the atmosphere acts as a fluid.

You have developed a promising anti-cancer agent, but it has poor solubility in water. Which of the following changes should improve water solubility? ( there is two possible answers)a) adding a methyl groupb) adding a hydroxyl groupc) adding a carboxyl groupd) increasing the size of the druge) adding a benzene ring

Answers

Answer:

adding a hydroxyl group

adding a carboxyl group

Explanation:

The addition of a hydroxyl or a carboxyl group to the molecule will increase its solubility. This is because, the -OH group will form hydrogen bonds with the water molecules. The formation of such hydrogen bonds will lead to improvement in the solubility of the anti cancer agent and solve the problem of poor solubility of the anticancer agent in water.

Please help me Solve this *I DONT WANT THE ANSWER* Just give me a good explanation...

Answers

Answer:

C

Explanation:

'Ordered Arrangement' basically means that it is a solid at room temperature. Room temperature is approximately 15-20C so we are looking for melting and boiling points that are above room temperature so it hasn't/can't melt or boil at room temperature and would therefore be solid. Option C is the only one where both points are temperatures above room temperature therefore option C is the only one where the substance would be in an 'ordered arrangement' at room temperature.

Hope this helped!

A 515cm^3 flask contains 0.460 g of a gas at a pressure of 153 kPa and a temperature of 322K. What is the molecular mass of this gas

Answers

Answer:

Molecular mass, [tex]M=28.89\ \text{g/mol}[/tex]

Explanation:

Given that,

Mass of gas, m = 0.46 g

Volume of the container, V = 515 cm^3

Pressure, P = 153 kPa

Temperature, T = 322 K

We need to find the molecular mass of this gas. We know that,

PV =nRT

n = no of moles

[tex]n=\dfrac{PV}{RT}\\\\n=\dfrac{153\ kPa\times 0.515\ L}{8.31447\ LkPaK^{-1}{mol^{-1}}\times (322+273)\ K }\\\\n=0.01592\ \text{moles}[/tex]

No of moles = mass/molecular mass

Let molecular mass is M

[tex]M=\dfrac{m}{n}\\\\M=\dfrac{0.46}{0.01592}\\\\M=28.89\ \text{g/mol}[/tex]

So, the molecular mass of this gas is [tex]28.89\ \text{g/mol}[/tex]

test results indicated a chemical change has taken place ​

Answers


Some signs of a chemical change are a change in color and the formation of bubbles. The five conditions of chemical change: color chage, formation of a precipitate, formation of a gas, odor change, temperature change.

The number 325.608 rounded to 3 significant figures is A) - 326 B) - 325.6 C) - 325.61 D) - 325 BRAINLIEST!!

Answers

Answer:

A.326

Explanation:

B is incorrect because that would be 4 significant figures.

C is incorrect because that would be 5 significant figures.

D is incorrect because, while it is 3 significant figures, it is rounding the .6 down which doesn't make sense. since it's .6 you should be rounding up not down.

D) - 325 I think or could possibly be B

A recipe for spaghetti sauce requires 2.5 cups of tomato sauce. If only metric measures are available, how many milliliters of tomato sauce are needed? (1qt = 4 cups, 1q = 946 mL)

Answers

Answer:

6.0 × 10² mL

Explanation:

Step 1: Given data

A recipe for spaghetti sauce requires 2.5 cups of tomato sauce.

Step 2: Calculate the US Quarts (qt) corresponding to 2.5 cups of tomato sauce

We will use the relationship 1 qt = 4 cups.

2.5 cups × (1 qt/4 cups) = 0.63 qt

Step 3: Calculate the milliliters (mL) corresponding to 0.63 qt of tomato sauce

We will use the relationship 1 qt = 946 mL.

0.63 qt × (946 mL / 1 qt) = 6.0 × 10² mL

Why do minerals with metallic bonds conduct electricity so well?

Answers

Answer and Explanation:

Because metallic bonding involves delocalized electrons. It is described as a "sea of electrons", because the electrons are not confined around the nucleus of metal atoms, but they are delocalized: thay can be located in one nucleus and then in another neighbor atom. Thus, the electrons have more freedom to move from one part of the metal to another and electricity is well conducted.

Arrange the compounds by boiling point. a. A pentane molecule with the condensed structure CH3CH2CH2CH2CH3. b. A neopentane molecule with the condensed structure C(CH3)4. c. A hexane molecule with the condensed structure CH3CH2CH2CH2CH2CH3.

Answers

Answer:

Hexane > pentane > neopentane

Explanation:

The boiling point of alkanes varies with chain length. The greater the length of the chain, the greater its boiling point.

Since hexane consists of a longer chain than pentene, its boiling point is definitely higher than that of pentane.

Similarly, neopentane is a branched alkane, the boiling point of a branched alkane is always lower than that of its straight chain counterparts.

Hexane has the highest boiling point due to its higher molecular weight, followed by pentane, and neopentane has the lowest boiling point due to its highly branched structure.

The boiling point is primarily influenced by two factors: molecular weight and branching. The higher the molecular weight, the stronger the van der Waals forces and, therefore, the higher the boiling point. Branching in a molecule tends to disrupt the intermolecular forces, reducing the boiling point.

Hexane has a higher molecular weight than pentane, so it would generally have a higher boiling point than pentane.

Neopentane is highly branched, with four methyl (CH3) groups attached to the central carbon. This branching significantly disrupts the intermolecular forces, reducing the boiling point compared to straight-chain molecules like pentane and hexane.

To learn more about the boiling point, follow the link:

https://brainly.com/question/2153588

#SPJ6

the mass if an element is .007502 x 10^-26 g. find the Number of significant figures when the mass is converted to mg. (both masses values have same order of magnitude)

Answers

Answer:

d. 4.

Explanation:

Hello,

In this case, the required number on milligrams is:

[tex]0.007502x10^{-26}g*\frac{1000mg}{1g}=7.502x10^{-26}mg[/tex]

It means that it has four significant figures which are counted for 7, 5, 0 and 2, considering that zero as it is to the right of first nonzero digit (7).

Regards.

A 18.00 g g milk chocolate bar is found to contain 11.00 g g of sugar.1. How many milligrams of sugar does the milk chocolate bar contain?2. What will be the amount of sugar in milligrams if the size of the milk chocolate bar is reduced from 18.00 g to 4.000 g ? Express your answer in milligrams to four significant figures.

Answers

Answer:

1. 1.100x10⁴mg

2. 2444mg

Explanation:

1. The 18.00g milk chocolate bar contain 11.00g of sugar. In miligrams:

11.00g * (1000mg / 1g) = 1.100x10⁴mg

2. If a bar of 18.00g contain 11.00g of sugar, a bar of 4.000g will contain:}

4.000g bar * (11.00g / 18.00g)  = 2.444g of sugar.

In miligrams:

2.444g * (1000mg / 1g) = 2444mg

A biochemical reaction will proceed in the direction as written if:_______a. ΔG > 0.b. ΔH > 0.c. ΔG = zero.d. ΔG < 0.e. ΔH < 0.

Answers

Answer:

ΔG < 0

Explanation:

The condition for spontaneity of a chemical reaction is that ∆G<0. Hence for any biochemical reaction to proceed as written, ∆G must have a negative value.

If ∆G >0, the reaction is not spontaneous and will not proceed as written. ∆G=0 means that the reaction has attained equilibrium.

What am I calculating for when solving for 17.0 mL of ethanol, density of ethanol= 0.94 g/mL

Answers

Answer:

you are caculating for the mass/wight of ethanol

Explanation:

DxV=M

Other Questions
Economic conditions influence both the types of products being made and their prices.True or false Gena and her friends each estimated the quotient of 137.56 divided by 6.12 using compatible numbers. Which shows the best estimate using compatible numbers? Listen to the audio and decide if the statement is true or false. Claudia needs to pay attention during class. True False the thickness of a surfboard relates to the weight of the surfer.a surfboard is 21 3/16 inch thick.write each dimension as a decimal. What is the purpose of statistical analysis? Kelly works 8 hours less than three times as much as Marcy works for the week. Which expression representthe number of hours Kelly works in relation to Marcy. If 100 mg drug is administered and has a half life of 6 hours, the percentage of the drug that will be in the system is 18 hours. a. Trueb. False Managers who are responsible for just one organizational activity are known as ______ managers.a. specialist b. first-line c. singular d. functional e. top-level Which of these learning styles best describes someone who prefers to learn through hands-on activity or activities that allow them to use movement?verbal/linguisticinterpersonalbodily/kinestheticrhythmic/musical I need to answer this using dimensional analysis and the answer must be written in Scientific notation. I can't figure it out. convert 35 kg into lb, then round it to two decimal places What do Mrs. Bells actions tell the reader about her? a salad made with lettuce, cheese, tomatoes, onions, croutons and dressing is an example of a a: heterogenous mixtureb: homogenous mixture The ability to unconsciously process how many times you checked your phone for text messages during the past 24 hours best illustrates What is 2.5 15.625 What year will y'all graduate What is a substance?ASAPPP On the map, choose the nation that expelled thousands of Muslims because of religious differences. What is p-^m divided by p^n equal to? Answers p-^m + n P-^m n p-^m - n P-^m divided by n What does the want of sufficient energy in our present confederation mean