Why is current i in Ohm's law?

Answers

Answer 1

It turns out that I stands for the German word for intensity, intensität.And if you look about it, the main aspect of stream or flow is intensity.

Why do I support the current?

Current is typically represented by the letter I, which comes from the French term intensité du courant (current intensity).The term "current" is frequently used to refer to current intensity.André-Marie Ampère, who gave the electric current unit its name, formulated his force law using the I symbol (1820).

Am I up to date on Ohm's law?

Ohm's Law Formula:V = IR is the formula, where V seems to be the voltage applied from across conductor, I is indeed the current that flows through it, and R represents the resistance the conductor offers to the current flow.

To know more about Ohm's law visit:

https://brainly.com/question/1247379

#SPJ4


Related Questions

an object slides across a horizontal surface such that it slows down due to the force of friction that is exerted on the object. the object and the direction of its displacement are shown in the figure. which of the following free-body diagrams could represent the forces that are exerted on the object?

Answers

F normal up, Fg down, small arrow left F friction

There are three forces acting on the sliding object across a horizontal surface. These are normal force, gravity force and friction force.

The direction of normal force is always upward. This force is acting on the object against the gravity. Gravity force is towards the center. Gravity force causes downward sliding of the object.

There is a third force also in action. Friction force exists between surface of two objects when one object is moved on the surface of another object, or is tried to move. Friction force acts against the motion of an object.

The correct option is B.

To know more about friction force here

brainly.com/question/14662717

#SPJ4

which wavelength of the band on the helium emission line spectrum has the most energy? which has the lowest?

Answers

The light emitted by hydrogen atoms appears red because the most intense line in its spectrum, at 656 nm, is in the red section of the visible spectrum.

The principal quantum number(n) for the Lyman series is 1. As a result, the Lyman series has the highest energy in the hydrogen spectrum. This is due to the fact that helium has more electrons than hydrogen. Helium has two, while hydrogen has only one. More spectral lines will be noticed as more electrons are stimulated. Helium therefore has more spectral lines than hydrogen. Gamma rays are the most energetic, have the shortest wavelengths, and have the highest frequencies.

Learn more about spectrum here-

https://brainly.com/question/12157930

#SPJ4

How do I improve my scope 3 emissions?

Answers

To encourage action, establish clear expectations with your vendors and engage them strategically.Companies have to go beyond data collecting and establish clear expectations on suppliers about emissions reduction in order to significantly cut upstream Scope 3 emissions.

Why are the scope 3 challenging?

The enormous number of partners inside the value chain is one factor contributing to the difficulty of accounting on Scope 3 emissions.For major companies, the number of upstream supply chain partners who contribute to Category 3 emissions can range from hundreds to tens of thousands, and they may be located all over the world.

How may Level 3 GHG emissions be reduced?

Reducing the amount of goods purchased can take many different forms, including switching to incoming materials with such a lower CO2 content, reducing input quantity, using recycled materials as inputs, reducing production waste, favoring more sustainable suppliers, and working with important suppliers to reduce their own carbon footprints.

To know more about scope 3 emissions visit:

https://brainly.com/question/29546969

#SPJ4

What is the power rating of an engine capable of lifting a 100 kg object 5 m vertically in 4 seconds? do not include units in your answer.

Answers

The power rating of an engine who can lift a 100kg object 5m vertically in 4 seconds is 125watt.


How to calculate the power rating of the engine?

In electrical engineering and mechanical engineering, the power rating of equipment is the highest power input allowed to flow through particular equipment. According to the particular discipline, the term power may refer to electrical or mechanical power.

From the question given :
Force (f) = 100

Time (t) = 4 seconds

Distance (d) = 5m

Work done = f * d

= 100 * 5

= 500

So, The power will be

= Work / time

= 500 / 4

= 125watt

Therefore, the power rating of the engine is 125watt.

Learn more about power https://brainly.com/question/3854047

#SPJ4

What is the line segment formula?

Answers

Formula of

Line segment

is AB =

[tex]\sqrt{(x_{2} -x_{1} )^{2} } +\sqrt{(y_{2} -y_{1} )^{2} }[/tex]

                                                                             

Line segment

is a part of line with definite length. It has two ending points whereas a line has no end points and extended infinitely in both the direction. Line which joins both ending points with possible shortest way is known as

Line segment

.

            A ______________________ B    

        (x₁,y₁)                                             (x₂,y₂)      

This line segment can be represented as [tex]\frac{}{AB} /\frac{}{BA}[/tex]. In other word we can say line segment is

subset

of line, so it contains all the points of line lying between both end point of segment. For shorter length it can simply measure by

ruler

. A bar (-) is always on top of its notation {[tex]\frac{}{AB}[/tex]}.

Learn more about

Line segment

visit:

brainly.com/question/30072605

#SPJ4                        

Formula of Line segment is AB =  [tex]\sqrt{(x_{2}-x_{1})^{2} } +\sqrt{(y_{2}-y_{1})^{2} }[/tex]

                                       

Line segment

is a part of line with a definite length. It has two ending points whereas a line has no end points and extended infinitely in both the direction. Line which joins both ending points with possible shortest way is known as

Line segment

        A ______________________ B    

       (x₁,y₁)                                             (x₂,y₂)      

This line segment can be represented as[tex]\overline{AB}/\overline{BA}[/tex] . In other word we can say line segment is subset of line, so it contains all the points of line lying between both end point of segment. For shorter length it can simply measure by ruler A bar (-) is always on top of its notation {[tex]\overline{AB}/\overline{BA}[/tex]}.

To learn more about Line segment :

brainly.com/question/30072605

#SPJ4                        

Classify the measurements as having English units or metric units. English units Metric units Answer Bank 2.50 lb 2. 20 kg 335 ml. 33.21 oz 12.2 26.9 mm Now, classify the units of the measurements as units of length, mass or volume.

Answers

A decimal system of measurement, the metric system was developed in France in 1799 and has since been widely used around the world.

The metric system serves as the foundation for the International System of Units, the universally accepted system of measurement. Although the United States legal framework was modified in 1866 to permit the use of the metric system, the country has not yet adopted it as its "official" system of measuring. Body-based measuring was the foundation on which the United States English System of measurement was built. Traditionally, the foot, the inch, and the pound have served as the foundational units of measurement in the English system. Metric prefixes like kilo, Millis, and centi are used to denote multiples of a base unit, such as the meter or the gram. When it comes to measuring length, the English system has a bad reputation.

The complete answer is attached as an image.

Want to know more about units visit the link which is given below;

https://brainly.com/question/10433377

#SPJ4

A 2 kg stone moves with a speed of 1 m/s. A second 2 kg stone is moving twice as fast. Compare their kinetic energies.

Answers

The second 2 kg stone has four times the kinetic energy of the first 2 kg stone.

The kinetic energy of an object is equal to (1/2) * m * v^2, where m is the mass of the object and v is the velocity of the object.

For the first 2 kg stone, the kinetic energy is

(1/2) * 2 kg * 1 m/s^2 = 1 kg m^2/s^2.

For the second 2 kg stone, the velocity is twice as fast, so the kinetic energy is

(1/2) * 2 kg * (2 m/s)^2 = 8 kg m^2/s^2.

The second 2 kg stone has 8 kg m^2/s^2 of kinetic energy, which is four times the kinetic energy of the first 2 kg stone, which has 1 kg m^2/s^2 of kinetic energy.

Learn more about Kinetic Energy here:

https://brainly.com/question/20658056

#SPJ4

What is the velocity of a wave that has a wavelength of 3.0 m and a frequency of 12 Hz?

Answers

It travels at a speed of 36 meters per second

The velocity of a wave is a measure of how fast the wave travels through a medium. It is given by the equation v = λf, where v is the velocity, λ is the wavelength, and f is the frequency. In this case, the given wavelength is 3.0 meters and the given frequency is 12 Hertz.

Plugging these values into the equation, we can calculate the velocity of the wave:

v = (3.0 m) * (12 Hz) = 36 m/s.

This means that the wave travels at a speed of 36 meters per second.

It is important to note that the velocity of a wave depends on the properties of the medium through which it is traveling, as well as the wavelength and frequency of the wave itself.

To learn more about the velocity of a wave, check out https://brainly.com/question/29765286

Use the graph to calculate the distance, in m, between station B and station C.​

Answers

The distance from station B to station C as seen in the velocity time graph is calculated as; 6000 m

How to interpret Velocity Time Graph?

Velocity-time graph is simply defined as a plot that shows the relationship between Velocity and Time.

Now, the velocity time graph attached shows the motion of the movement of the train from station B to station C.

Now, when it comes to velocity time graph, we have to know that the area of a velocity time graph, gives us the overall distance covered by the motion it represents.

Since the velocity time graph is a trapezium shape, then we will use the are of a trapezium formula to get the distance from station B to station C.

Area of trapezium = ¹/₂(sum of parallel sides) * height

Plugging in the relevant values from the graph gives;

Distance = ¹/₂(300 + 100) * 30

Distance = ¹/₂ * 400 * 30

Distance = 6000 m

Read more about Velocity Time Graph at; https://brainly.com/question/26209293

#SPJ1

in a closed system, an object with a mass of 10 kg moves at a velocity of 5.4 m/s. it collides with a second object that has a mass of 12 kg and that is moving in the opposite direction with a velocity of 3.5 m/s. what is the total momentum of the system after the collision?(1 point) responses 42 kg-m/s

Answers

The total momentum of the system after collision is 12 kg-m/s.

What is collision?Two items collide when they come into brief physical touch with one another. Or to put it another way, a collision is a reciprocative engagement between two masses that lasts for a relatively brief time and results in a change in momentum and energy.There are, however, three distinct types of collisions: elastic, inelastic, and absolutely inelastic. I'll say it again: in all three categories of collisions, momentum is preserved. The transformation of kinetic energy characterizes collisions.A collision is an instantaneous interaction between two or more bodies, occurring at the same time, that modifies the motion of the bodies involved as a result of the internal forces acting on them. Conflicts involve troops (there is a change in velocity). Before impact, there is a significant differential in velocity that is this size.

To learn more about collision refer to:

https://brainly.com/question/12497950

#SPJ1

galilea was the first scientist to do which of the following

Answers

Answer: Use a refracting telescope to make important astronomical discoveries.

Explanation:

Identify the part of the neuromuscular junction at B: B A Axon Terminal O Dendrites Axon branches O Muscle fiber Identify the structure at A: В. A O muscle fiber dendrites O axon terminals O axon branches

Answers

B. the building at A O muscle fibre dendrites O branches and axon terminals. The 'B' structure consists of axon branches and Axon terminals are the structure designated "A."

1). The structure labeled "B" is: Axon branches

-Because a motor neuron's axon has multiple branches that come together to form a neuromuscular junction, one of its axons can innervate numerous muscle fibers.

- These branches carry potential action in the direction of certain synaptic knobs.

2). The structure labeled "A" is: Axon terminals

-It creates a neuromuscular connection with the motor end plate of the sarcolemma and features a bulged structure at its most terminal end.

- Neurotransmitter is exocytosed from the axon terminal.

- Synaptic cleft is the area between the sarcolemma and the synaptic knob at the axon terminal.

Any of the button-like ends of axons through which axons create synaptic connections with other nerve cells or with effector cells is known as an axon terminal. Neurotransmitter-containing synaptic vesicles bind at the axon terminal. The cell opens up to calcium ions upon activation by a graded potential or by an action potential of the presynaptic neuron. This starts a chain reaction that leads to the synaptic vesicles fusing into the axon terminal membrane. The synaptic vesicle proteins that the calcium ions activate create fusion holes that allow the neurotransmitters to leave. The effects of the neurotransmitters on the target cell only last for a brief period of time.

Learn more about Axon terminals here:

https://brainly.com/question/19435017

#SPJ4

When a ball at a billiard table hits another ball it is an example of elastic collision?

Answers

The collision of two billiard balls is an example of elastic collision.

An elastic collision is a collision where Kinetic energy is preserved. In this type of collision, there will be no change in overall kinetic energy and momentum.

An inelastic collision is where the Kinetic energy is not preserved. Here some of the kinetic energy is transferred to some other form of energy like thermal energy or sound energy.

In both type of collisions, momentum is preserved. There are fewer examples of  perfectly elastic collision in real life. Collisions in atomic levels are examples of perfectly elastic collisions. But some collisions where the energy loss is negligible are considered elastic collisions. One such example is the collision of the billiard balls.

So when a billiard ball hits another it is an elastic collision.

For further details regarding elastic collisions, please refer

https://brainly.com/question/2356330

#SPJ4

Rita is riding a 7.0 kilogram bike at a velocity of 15 meters/second. rita’s mass is 42 kilograms. what is her momentum?
a. 1.0 × 102 kilogram meters/second
b. 5.2 × 102 kilogram meters/second
c. 6.3 × 102 kilogram meters/second
d. 7.4 × 102 kilogram meters/second
e. 8.5 × 102 kilogram meters/second

Answers

Rita's momentum when riding a 7kg bike at a velocity of 15m/s where her mass is 42kg is 7.4 * 10² kilogram meters / second. Therefore, the answer is D.

How to calculate Rita's momentum?

In Newtonian mechanics, momentum is the product of the mass and velocity of an object. It's a vector quantity, possessing a magnitude and a direction.

Based from the question, given :
mass of bike = 7kg

mass of Rita = 42kg

velocity = 15m/s

Momentum (P) = mass * velocity

= (mass of bike + mass of rita) * 15

= (7 + 42) * 15

= 49 * 15

= 7.4 * 10² kilogram meters / second

Therefore, the answer is D.

Learn more about momentum https://brainly.com/question/2293056

#SPJ4

What is bulk modulus of water?

Answers

Answer:

Water has a bulk modulus of around 300,000 psi (2.1 GPa) and so a compressibility of 3.3 106 (psi)1.

Explanation:

given a uniform one meter long stick with a mass 0.100 kg a mass of 0.020 kg is placed 5.00 cm away from the end of the stick om the table g how far can the center of mass of the stick be moved to the right before the stick begins to rotate

Answers

The center of mass of the stick will be moved above 79.2 cm to the right before the stick begins to rotate.

What is the equilibrium position of the meter rule?

The equilibrium position of the meter rule is the point at which all the forces acting on the meter rule sums to zero.

The equilibrium position of the meter rule is determined by taking moment about the center mark or the end position.

-------5cm---------------------------------------------------------100cm

       ↓             x             ↓

     0.02 kg                  W

sum of anticlockwise moment = sum of clockwise moment

0.02 (x) = W (100 - (5 + x) )

0.02x = 0.1 ( 100 - ( 5 + x ) )

0.02x = 0.1 ( 100 - 5 - x )

0.02 x = 10 - 0.5 - 0.1x

0.12 x = 9.5

x = 9.5 / 0.012

x = 79.2 cm

Thus, when the center mass is moved any distance above 79.2 cm, the meter stick will begin to rotate.

Learn more about center of mass here: https://brainly.com/question/13499822

#SPJ1

What does MgBr2 mean?

Answers

The chemical formula of Magnesium Bromine MgBr₂.

Magnesium bromide is a chemical compound which is formed by the combination of magnesium and bromine.

The chemical formula of Magnesium Bromine MgBr₂.

The colour of Magnesium Bromine is white and it is a very deliquescent crystalline type solid in nature.

It can be sometimes used as a mild sedative and also we can use is as an anticonvulsant which is commonly used in the treatment of nervous disorders.

It can be easily soluble in water and sometimes it can also be easily dissolved in alcohol.

For more questions on Magnesium bromide

https://brainly.com/question/25947089

#SPJ4

A ball of mass M is on a horizontal surface with negligible friction. One end of a string is attached to the ball so that it is spun in a horizontal circle of radius R at a tangential speed vo, as shown in Figure 1. A free-body diagram for the ball at an instant in time is shown in Figure 2. The magnitude of the tension force is also indicated in Figure 2. Which of the following equations represents the centripetal acceleration of the ball if its tangential speed is increased to 2vo ?

Answers

The centripetal acceleration of the ball if its tangential speed is increased to 2 v₀ is (4 M v₀²)/R.

The centripetal force equation that we are aware of is

F = (m* v²)/r ----(1)

where,

m is the of the ball

v is the velocity

r is the radius

We are aware that F = m* a ----(2)

Equating (1) and (2), we have,

m* a = (m* v²)/r

a = v²/r -----(3)

where, a is centripetal acceleration

In this problem, it is said that, the tangential speed is increased to 2 v₀, then the centripetal acceleration

So, v = 2 v₀, r = R

Substituting the values in (3), we have,

ac = (2 v₀)²/R = 4 v₀²/R

Thus, the required centripetal acceleration is 4 v₀²/R.

The question is incomplete. The complete question has the missing figures that are attached in the attachment below.

To know more about centripetal acceleration:

https://brainly.com/question/20113093

#SPJ4

The primary blast cell for bone is the
O hemangioblast
O fibroblast
O chondroblast
O osteoblast
O hemocytoblast

Which of the following is NOT a type of connective tissue?
O Adipose
O Bone
O Blood
O Alveolar
O Cartilage

Connective tissue extracellular matrix is composed of
O capillaries and cells
O ground substance and cells
O collagen fibers, elastic fibers and reticular fibers
O cells and fibers
O fibers and ground substance

Which of the following statements concerning connective tissue is TRUE?
O Cartilage tissue tends to heal less rapidly than bone tissue.
O Reticular connective tissue serves as the universal packing material between other tissues.
O Connective tissues that possess a large quantity of collagen fibers often provide the framework for organs such as the spleen and lymph nodes.
O The basic difference between dense irregular and dense regular connective tissues is in the amount of elastic fibers and adipose cells present.
O A major characteristic of fibrocartilage is its unique amount of flexibility and elasticity

A ciliated version of pseudostratified columnar epithelium containing mucus-secreting goblet cells
O lines most of the respiratory tract
O aids in digestion
O is more durable than all other epithelia
O is found in some of the larger glands
O protects underlying tissues in areas subjected to abrasion in the moist linings of the esophagus, mouth and vagina

Answers

a)The primary blast cell for bone is the osteoblast b) Alveolar  is NOT a type of connective tissue. c) Connective tissue extracellular matrix is composed of fibers, and a ground substance d)Cartilage tissue tends to heal less rapidly than bone tissue. e))lines most of the respiratory tract of pseudostratified columnar epithelium containing mucus-secreting goblet cells.

In addition, blast cells known as myeloblasts can form. Young blood cells made by stem cells are what these are. The synthesis of red, white, and platelet-forming blood cells can also be hampered by an excess of blast cells. Bone marrow blasts are not expected in healthy individuals. When a person develops leukemia, aberrant, immature white blood cells—known as blasts—proliferate rapidly, filling up the bone marrow and blocking the creation of other cells vital to survival, such as red blood cells and platelets. Anemia, infections, and unusual bleeding result from this. Blast cells shouldn't make up more than 5% of the bone marrow cells in healthy individuals, and they often aren't present in the blood.

Learn  more about blast cells here:

https://brainly.com/question/8211591

#SPJ4

Which force is greater static or sliding friction?

Answers

Sliding friction is significantly less than static friction for a pair of specified surfaces. because moving an object in motion is simpler than moving an object at rest.

Why do sliding and static friction differ?

Contact points are not given enough time to fully interlock while sliding. thus, less friction. But because the surfaces interlock so effectively while the object at rest, friction increases. The difference between static and sliding friction is thus explained.

Why is static friction at its highest?

Friction force has an identical amplitude in the reverse direction to any little force applied to an object. The greatest static friction force on an item is s times the usual force.

To know more about Sliding friction visit :

https://brainly.com/question/17140804

#SPJ4

Which ion in the ground state has the same electron configuration as an atom of neon in the ground state.

Answers

Na+ ion in the ground state has the same electron configuration as an atom of neon in the ground state.

The electronic configuration has been defined as the electron address in a atom. The electronic configuration has been based on the quantum rule for the filling of the electrons.

Neon is the tenth element with a total of 10 electrons. In writing the electron configuration for neon the first two electrons will go in the 2p orbital. Since 1s can only hold two electrons for Ne go in the 2s orbital. The remaining six electrons will go in the 2p orbital. Therefore, the Ne electron configuration 1s22s22p6.

Ne (atomic number=10) have 2,8 electron configurations. Here the atomic number of Na is 11. The configuration of Na is 2,8,1. Atomic number of Na+ is 10 and it has an electron configuration of 2,8 which is similar to Ne. Na+ ion is a positively charged particles, because they are missing one electron.

learn more about electronic configuration:

https://brainly.com/question/5524513

#SPJ4

two drivers make 100-km trips. Driver 1 complets the trip in 2 hours. Driver 2 takes 3 hours but stops for an hour halfway. which driver has a greater average speed? Explane

Answers

Answer:

Driver 1

Explanation:

In this scenario, driver 1 has a greater average speed than driver 2. To determine the average speed of a driver, we need to divide the distance traveled by the time it took to travel that distance. In the case of driver 1, who traveled 100 km in 2 hours, their average speed would be 100 km / 2 hours = 50 km/hour. For driver 2, who traveled 100 km in 3 hours but stopped for an hour halfway, their average speed would be 100 km / (3 hours - 1 hour) = 33.33 km/hour. Since 50 km/hour is greater than 33.33 km/hour, driver 1 has a greater average speed.

the equivalent capacitance is a. 9 μf b. 6 μf c. 3 μf d. 2 μf e. 1 μf

Answers

The equivalent capacitance is  21 μF.

In electrical engineering, equivalent capacitance often abbreviated as C eq—is a measurement of the total combined electric charge held in two or more capacitors connected in series or parallel. A capacitor is an electrical device that stores electrical energy into the electric field. Typically, a capacitor has two electrical leads that are separated by a dielectric or other insulating substance.

We are given that,

capacitance =c₁ =9  μF

capacitance = c₂ =6  μF

capacitance = c₃ = 3  μF

capacitance = c₄ =2  μF

capacitance = c₅ = 1  μF

Thus If the capacitor is connected in parallel the equivalent capacitance, cₐ can be calculated by the equation,

cₐ= c₁+c₂+c₃+c₄+c₅

cₐ = 9 +6 +3 +2+1 μF

cₐ = 21 μF

Therefore , The equivalent capacitance would be  21 μF.

To know more about equivalent capacitance

https://brainly.com/question/27988457

#SPJ4

How does the induction motor works?​

Answers

Answer:

It uses electromagnets to create a rotating magnetic field.

Explanation:

I remember learning this in AP Physic class. The interaction between the two fields causes the rotor to turn and it creates a magnetic field!

Answer:

It generates a rotating magnetic field using electromagnets.

Why are digital signals more reliable than analog signals? (give an example as well please)

Answers

Digital signals more reliable than analog signals because of the many following reasons:

Digital signals are transmitted at a specific frequencies and amplitudes so the possibility of the signal being distorted is less than the analog signals.In Digital Signals or processing the digital information can be easily encrypted and compressed for digital use.Digital signals are time separated than analog one.

What are analog Signals?

Analog Signal is a Continuous type signal which has one time varying quantities such as Voltage, Pressure, etc. As in the analog audio signal the instantaneous voltage continuously varies with the sound wave's pressure.

To know more about Analogous Signal Visit

https://brainly.com/question/4523077

#SPJ1

suppose you have a microphone that is only sensitive to sounds between 400 and 1300 hz. you record the sound and look at the fft. there are large peaks at 600, 900, and 1200 hz. you know that the sound contains all (both even and odd) harmonics. what is the fundamental frequency of the sound?

Answers

the fundamental frequency is 300 Hz is the answer.

Constructive Frequency

Peak frequency differences are different by

= 1200 - 900 = 900 - 600 = 300 Hz

hence, the fundamental frequency is 300 Hz.

Since the frequency of constructive interference is an integer multiple of the fundamental frequency, the fundamental frequency can be calculated from the difference between two successive peak frequencies.

To learn more about Frequency

https://brainly.com/question/254161

#SPJ4

What are the 10 common genetic disorders?

Answers

The 10 most prevalent genetic disorders include albinism, Angelman syndrome, Ankylosing spondylitis, Apert syndrome, Charcot-Marie-Tooth disease, Congenital adrenal hyperplasia, Cystic fibrosis, and Down syndrome.

What genetic ailment is the most prevalent?

The most prevalent, deadly hereditary disease in the US is cystic fibrosis (CF). The condition affects about 30,000 persons in the US.

What exactly do you mean by genetics?

How traits and genes are passed down from one generation to the next is the main topic of genetics research. Our DNA contains information that affects our personalities, looks, and even health! Everything starts with genetics. One child has blonde hair like their mother, and their sibling has brown hair like their father; this is due to genetics.

To know more about genetic disorders visit:-

https://brainly.com/question/17404085

#SPJ4

What is frequency give its formula and units?

Answers

Answer: f = c/lambda

Explanation:

f = frequency

c= speed of light constant

lambda = wavelength

Unit -> hertz (Hz)

892-kg sports car is moving 14.6 m/s when it rear ends with stopped car having an identical mass at a stop light. Two cars entangle and move together after the collision. What is their speed immediately after the collision

Answers

The speed of the cars immediately after the collision will be the same as their speed before the collision, which is 14.6 m/s. In a perfectly inelastic collision, the objects involved in the collision will move together with the same speed after the collision as they had before the collision. This is because the total kinetic energy of the system is conserved in a perfectly inelastic collision.

15-28 a type of cuckoo clock keeps time by having a mass bouncing on a spring, usually something cute like a cherub in a chair. what spring constant is needed to produce a period of 0.500 s for a 0.0150-kg mass?

Answers

Spring constant is needed to produce a period of 0.500 s for a 0.0150-kg mass: The required spring constant is 2.368.

What is the time period of a spring-mass system?

The time period of a spring-mass system is the amount of time it takes for the system to complete one full cycle of oscillation. This time period is determined by the system's spring constant and mass, and is calculated using the formula: T = 2π√(m/k), where m is the mass of the system and k is the spring constant. In a spring-mass system, the time period is typically short and can range from a few microseconds to several seconds. The time period of a spring-mass system is an important factor when designing a system, as it can affect the performance of the system. If a system is required to complete multiple cycles of oscillation within a given amount of time, then the time period must be short enough to accommodate this.

T = 2π√(m/K)

In the given problem,

Time period , T = 0.5 s

Mass, m = 0.0150-kg

T = 2π√(m/K)

K = 4π²m/T²

   = 4× π² × 0.015  /  0.5²

   = 0.592/0.25

   = 2.368

Therefore the required spring constant is 2.368

To learn more about spring constant below is the given link:

https://brainly.com/question/23885190

#SPJ4

Other Questions
Was John Brown a martyr (hero) or a murderer (villain)? Why? FREE BRAINLEIAST FOR FIRST GOGOGOGO!! Simplify 2x - x + 4x pls help im bad at spanish pls!!!! 4. Determine the phenotype for each genotype below if purple flowers are 1dominant to white flowers: PP *PurpleWhitePink Substitution x+5y=13, 4x+7y=0PLEASE HELP MEE Form sentences in the preterite. Give as much information as possible Please help me thanks!!! Why did Queen Victoria wish to become Empress of India?O A. She became jealous of the title of her son's wife.B. She grew fascinated by India and wished to become Indian.C. She wanted to be closer to her Indian subjects.D. She wanted access to India's famous jewels. Find (3c2 - 8c + 5) + (c2 - 8c - 6).A 3c2 - 1B 4c2 - 16c - 1C 2c2 - 16c - 1 The Constitutional Convention saw many debates regarding the power of government Choose the issues that centered aroundlimiting the power of the president.es )A)impeachmentB)a four-year term0Commander-in-ChiefEliminateD)negotiating treatiesE)appointing executive officers 1. What is the minimum value of y in the graph belowy Write the equation that describes the following variation. Don't forget "k"!x varies directly with the square rootofy and inversely with the square of w and thecube root of z Which explains the difference between fascism in Italy and militarism in Japan?1. Mussolini seized power in Italy with support of the Blackshirts, while military leaders took control of Japan and conscripted men over twenty years old. 2. Military leaders seized control of Italy and conscripted men over twenty years old, while Mussolini took control of Japan with support of the Blackshirts.3.Mussolini seized power in Italy and invaded Manchuria, while military leaders took control of Japan and invaded Libya.4.Military leaders seized control of Italy and invaded China, while Mussolini took control of Japan and invaded Ethiopia Will give brainliest Find the measures of the missing angles: State five social problems of rapid population growth Is this correct?? So, basically, it asking for a decimal equivalent to 920.35 A sample of water containing somehow and bacteria was kept in a container. After some days it was observed that only snowball existed. What is the reason for the disappearance of the bacteria? The constant movement of rising warm air and sinking cool air in Earth's atmosphere is called atmospheric convection. What does atmospheric convection produce? A CD usually sells for $18.00. If the CD is 10% off, and sales tax is 7%, what is the total price of the CD, including tax?A. $18.30B. $17.33C. $17.46D. $17.50