A segmentation fault in your C++ program does not affect other users because of a mechanism called process isolation. Process isolation is a protective feature provided by modern operating systems that ensures each process runs in its own memory space.
A segmentation fault in a C++ program occurs when the program tries to access a memory location that it is not allowed to access. This can happen when the program is trying to access an area of memory that has not been allocated, or when it is trying to access memory that has already been freed.
This helps maintain system stability and protect user data, as a segmentation fault in one program will not impact the functionality or data of other programs running on the same system.When a segmentation fault occurs, the operating system intervenes and terminates the program, preventing it from causing any further damage to the system. This means that the segmentation fault only affects the user who was running the program at the time the fault occurred.Other users who are not running the program are not affected because their processes are separate from the process that caused the segmentation fault. Each process has its own memory space, and a fault in one process does not affect the memory of other processes. It is important to note, however, that a segmentation fault can still have consequences for other users if the program that caused the fault is part of a larger system or service. In this case, the fault may cause the system or service to crash, affecting all users who rely on it.Know more about the C++ program
https://brainly.com/question/14426536
#SPJ11
CCTV systems are used prevent, deter, and detect pilferage. True or False?
True. CCTV systems can help prevent pilferage by deterring potential thieves and can also detect any attempted or successful thefts.
CCTV (closed-circuit television) systems are commonly used to prevent, deter, and detect pilferage, which is the theft of small items or petty theft. CCTV systems use video cameras to capture footage of the area being monitored, and this footage can be viewed in real-time or recorded for later review. The presence of CCTV cameras can deter potential thieves from committing theft, as they may be afraid of being caught on camera and subsequently identified and prosecuted. If a theft does occur, the footage from the CCTV system can be used to identify the perpetrator and provide evidence for legal proceedings. Additionally, CCTV systems can be used to monitor employees and ensure that they are following proper procedures and not engaging in theft or other illicit activities. Overall, CCTV systems can be an effective tool for preventing and detecting pilferage, as well as providing evidence for prosecution and improving overall security.
Learn more about CCTV here-
https://brainly.com/question/26407408
#SPJ11
A pump assembly where the impeller is mounted directly on the shaft of the motor driving the pump is referred to as?
a) Close coupled
b) Frame Mounted
c) Shaft Driven
d) Mixed Axial
A pump assembly where the impeller is mounted directly on the shaft of the motor driving the pump is referred to as: a) Close coupled
An impeller is a rotating component found in many mechanical devices, such as pumps, fans, and turbines. It is typically made of metal, plastic, or composite materials and is designed to transfer energy from a motor or engine to a fluid or gas, causing it to move or be compressed. The impeller is characterized by its shape, which typically consists of a series of curved blades or vanes that are mounted around a central hub. The shape and arrangement of the blades determine the flow characteristics and efficiency of the impeller. Impellers are used in a wide range of applications, from moving water in swimming pools to propelling aircraft engines.
Learn more about impeller here:
https://brainly.com/question/28267795
#SPJ11
B-12.5 mix can also be substituted for what?
B-12.5 mix typically refers to a type of concrete mix with a compressive strength of 12.5 megapascals (MPa).
Depending on the specific application and requirements, this mix could potentially be substituted for other concrete mixes with similar compressive strengths, such as: C15/20 concrete: This is a common concrete mix with a compressive strength of 15 MPa at 28 days. It is typically used for non-structural applications like paving, sidewalks, and lightweight construction. ST2 concrete: This is another common concrete mix with a compressive strength of 10-15 MPa at 28 days. It is typically used for simple reinforced concrete structures, foundations, and walls.
Learn more about megapascals here:
https://brainly.com/question/18108087
#SPJ11
(358-26) A run of electrical metallic tubing between outlet boxes shall not exceed _____ close to the box.
The National Electric Code (NEC) states that a run of electrical metallic tubing between outlet boxes shall not exceed 3 feet close to the box.
This is to ensure safe and efficient electrical wiring installation. It is important to follow these guidelines to prevent electrical hazards and ensure compliance with local building codes. If too many wires are installed in a conduit, the conduit can become overheated, which could create a fire hazard. The maximum length limit helps ensure that there is adequate space in the conduit for the wires, which in turn helps prevent overheating.It's worth noting that the maximum wire fill rule for EMT conduit is not the only requirement for conduit installations in the NEC. Other requirements include rules for minimum conduit size, maximum conduit fill, and proper installation techniques to ensure the conduit is securely fastened and protected from damage. These requirements are all aimed at ensuring the safety and reliability of electrical wiring installations.
Learn more about electrical here
https://brainly.in/question/47308007
#SPJ11
Sleeve-type and "victaulic" couplings are the most common forms of a. Mechanical couplings
b. Welded joints
c. PVC pipe fittings
d. Flanged joints
a. Mechanical couplings - Sleeve-type and "victaulic" couplings are both examples of mechanical couplings, which are used to connect two pipes together without the need for welding or other forms of jointing.
They are designed to be easy to install and disasseandmble, and can be used in a wide range of applications, from plumbing and HVAC systems to industrial piping water treatment facilities. Mechanical couplings are typically made from durable materials like stainless steel or ductile iron, and are designed to withstand high pressures and temperatures.Sleeve-type and Victaulic couplings are the most common forms of a. Mechanical couplings. These couplings are used to join and seal pipes without the need for welding, and they provide flexibility and ease of installation.
Learn more about treatment here
https://brainly.in/question/2716379
#SPJ11
(250-68(B)) The connections (attachment) of the grounding electrode conductor to a grounding electrode shall be made in a manner that will ensure a permanent and effective _____.
The connections (attachment) of the grounding electrode conductor to a grounding electrode shall be made in a manner that will ensure a permanent and effective electrical connection.
An electrode is a conductor that is used to establish electrical contact with a non-metallic part of a circuit, such as a semiconductor or an electrolyte. Electrodes are commonly used in many fields, including electronics, electrochemistry, medical devices, and industrial applications.
In electronic devices, electrodes are used to connect electrical circuits to components such as transistors, diodes, and capacitors. In electrochemistry, electrodes are used to initiate and conduct electrochemical reactions, such as in batteries or electroplating.
Different types of electrodes may be used for different applications, including metal electrodes, carbon electrodes, and semiconductor electrodes. Electrodes may also be coated with different materials to enhance their properties, such as platinum or gold to improve conductivity, or to make them more chemically resistant.
Overall, electrodes play a critical role in enabling electrical and electrochemical processes in a wide range of applications.
Learn more about electrode here:
https://brainly.com/question/30529404
#SPJ11
How does increasing quantum/time-slice impact the
different scheduling criteria?
Increasing the quantum or time-slice in a scheduling algorithm impacts different scheduling criteria in the following ways:
1. Throughput: A larger time-slice allows each process to execute for a longer duration before being interrupted. This can reduce the overhead of context-switching and potentially increase throughput, particularly for CPU-bound processes.
2. Turnaround time: The impact on turnaround time depends on the workload. For CPU-bound processes, a larger time-slice can reduce turnaround time as it reduces context-switching overhead. However, for I/O-bound processes, a larger time-slice may increase turnaround time as these processes spend more time waiting in the ready queue.
3. Response time: A larger time-slice can increase response time, especially for interactive processes, as they may have to wait longer before getting a chance to execute. In this case, shorter time-slices are preferred for better responsiveness.
4. Fairness: A larger time-slice may reduce fairness in the scheduling algorithm, as processes with shorter execution times may have to wait for a longer time in the ready queue.In summary, increasing the quantum or time-slice impacts scheduling criteria in different ways, depending on the nature of the processes and the desired performance objectives. Balancing these trade-offs is essential for designing effective scheduling algorithms.
Learn more about quantum here
https://brainly.in/question/54156636
#SPJ11
What are the two main components of Cisco Express Forwarding (CEF)? (Choose two.)
The two main components of Cisco Express Forwarding (CEF) are: Forwarding Information Base (FIB), Adjacency table.
Forwarding Information Base (FIB): The FIB is a database that stores the next-hop address for each known destination network. The FIB is used to determine the egress interface and next-hop IP address for packets that need to be forwarded.
Adjacency table: The adjacency table is a database that contains information about the physical and data-link layer addresses of directly connected neighbors. The adjacency table is used to quickly forward packets to their destination by avoiding the need to perform ARP or other address resolution protocols for each packet.
Learn more about Cisco here:
https://brainly.com/question/27960084
#SPJ11
The general current divider equation used to find a branch current is equal to the: Select one: a. resistance total divided by that branch resistor, multiplied by the total current. b. branch voltage divided by the total resistance. c. branch resistance divided by the total resistance, multiplied by the total current, d. total resistance divided by the product of that branch resistance and the total current.
The correct answer is c. The general current divider equation used to find a branch current is equal to the branch resistance divided by the total resistance, multiplied by the total current. This formula is used when there are multiple resistors in parallel and we want to find the current flowing through a particular branch.
By knowing the branch resistance and the total resistance, we can determine the fraction of the total current that flows through that branch. The total resistance is the sum of all the resistors in parallel, while the branch resistance is the resistance of the particular branch for which we want to calculate the current.
The general current divider equation used to find a branch current is equal to the: c. branch resistance divided by the total resistance, multiplied by the total current.
In this equation, "branch resistance" refers to the resistance of the specific branch you want to find the current for, "total resistance" is the sum of all resistances in the parallel circuit, and "total current" is the current supplied to the entire parallel circuit.
To know more about a particular branch:- https://brainly.com/question/14151495
#SPJ11
The general current divider equation used to find a branch current is equal to option c:
branch resistance divided by the total resistance, multiplied by the total current.
Learn more about branch current: https://brainly.com/question/24858512
#SPJ11
Imagine that the Sun gained mass without changing its radius. How would the structure of spacetime change at the distance of Earth's orbit?
The increased mass of the Sun would cause significant changes in the structure of spacetime at the distance of Earth's orbit, affecting the planet's orbit and the passage of time near the Sun.
If the Sun gained mass without changing its radius, the gravitational field around it would become stronger. This would cause the curvature of spacetime to increase, resulting in a deformation of the fabric of space around the Sun.At the distance of Earth's orbit, this increased curvature of spacetime would result in a stronger gravitational force being experienced by the planet. This would cause the planet's orbit to become more elliptical, with a shorter distance between Earth and the Sun at perihelion (the point in the orbit closest to the Sun) and a longer distance at aphelion (the point in the orbit farthest from the Sun).
Learn more about spacetime here:
https://brainly.com/question/14040788
#SPJ11
(300-6(D)) The provisions required for mounting conduits on indoor walls or in rooms that must be hosed down frequently is ______ between the mounting surface and the electrical equipment.
The provisions required for mounting conduits on indoor walls or in rooms that must be hosed down frequently is to provide adequate clearance between the mounting surface and the electrical equipment.
This is to ensure that the electrical equipment is not damaged or affected by any water or moisture that may be present during the cleaning process. The clearance should be sufficient to allow for easy cleaning access and should also prevent any water from penetrating the conduit or entering the equipment through any openings. Additionally, any mounting hardware or brackets used should be constructed from materials that are corrosion-resistant and can withstand exposure to water and cleaning chemicals. Proper installation of conduits in these environments is essential to ensure the safety and reliability of the electrical system.
Learn more about indoor walls here:
https://brainly.com/question/30027764
#SPJ11
What action is performed by a class's default copy constructor?
The default copy constructor of a class performs a shallow copy of all the data members of the class. This means that the copied object will have the same values for its data members as the original object.
However, if the data members of the original object are pointers to dynamically allocated memory, the copied object will have a copy of the pointers but not a copy of the memory they point to. This can lead to problems if the copied object and the original object both try to modify the same dynamically allocated memory.
The default copy constructor performs a shallow copy of the object's data members. It simply copies the values of all data members from the original object to the new object. However, there are some cases where a class may require a custom copy constructor to perform a deep copy of its data members. In such cases, the default copy constructor may not be sufficient.
For instance, if a class has a pointer as a data member, then a shallow copy of the pointer value will simply copy the address of the pointer rather than the value it points to. This may lead to unexpected behavior when the original object and the copied object modify the same data. In summary, the default copy constructor is a member function of a class that is automatically generated by the compiler if the class does not have its own copy constructor defined.
Learn more about copy constructor here
https://brainly.com/question/31565873
#SPJ11
Which types of communication require parent/child process relationship?
The types of communication that require parent/child process relationship are those that involve one process (the parent) spawning another process (the child) and then communicating with it through various means such as shared memory, pipes, or signals.
This type of communication is common in operating systems and software development, where a parent process may need to create and manage multiple child processes to perform specific tasks. Examples of such communication include interprocess communication (IPC), fork-exec model, and client-server architecture.
Hi! In the context of computer systems and programming, the types of communication that typically require a parent/child process relationship are inter-process communication (IPC) methods. These include, but are not limited to, pipes, message queues, shared memory, and sockets. Parent/child processes utilize these IPC methods to exchange information and coordinate their actions effectively.
Learn more about communication here
https://brainly.in/question/32375161
#SPJ11
The Homeland Security Presidential Directive 12 (HSPD 12) aims to reduce the number of systems used in this facility access control procedures by mandating common system criteria:
a. Identification Systems and Methods b. Methods of Control c. Entry and Exit Inspection
HSPD 12 aims to standardize facility access control by mandating common criteria for identification systems, methods of control, and entry/exit inspection.
The Homeland Security Presidential Directive 12 (HSPD 12) was introduced to establish a secure and reliable common identification standard for access control to government facilities. HSPD 12 requires federal agencies to use common criteria for identification systems and methods of control to reduce the number of disparate systems in use. Additionally, HSPD 12 requires agencies to conduct entry and exit inspections to enhance security measures. By implementing these common standards, HSPD 12 aims to increase efficiency, reduce costs, and improve security in federal facilities.
learn more about HSPD here:
https://brainly.com/question/31275305
#SPJ11
The counter RES instructiona is used to reset the counterB.is given the same reference address as the counter instructionc decrements the count when actuatedd both a and b
A typical reservoir rock, into which oil has migrated and collected, isChoose one:A. shale.B. granite.C. sandstone.D. basalt.
C. Sandstone. A typical reservoir rock for oil is sandstone due to its high porosity and permeability, allowing for migration and accumulation of hydrocarbons.
Sandstone is a common reservoir rock for oil and gas because of its high porosity and permeability, which allow for the migration and accumulation of hydrocarbons. Shale, on the other hand, is a source rock for oil and gas but typically has low permeability and is not a good reservoir rock. Granite and basalt are igneous rocks that are generally not porous enough to hold significant amounts of oil or gas. Sandstone reservoirs can vary in quality, with some having higher porosity and permeability than others, but overall they are a commonly used target for oil and gas exploration and production.
Learn more about Sandstone here:
https://brainly.com/question/13886415
#SPJ11
Refer to the exhibit. A ping to PC3 is issued from PC0, PC1, and PC2 in this exact order. Which MAC addresses will be contained in the S1 MAC address table that is associated with the Fa0/1 port?
The MAC address will PC1 receive in the ARP reply is the MAC address of File_server1.
A MAC address (Media Access Control address) is a unique identifier assigned to a network adapter or network interface card (NIC) by the manufacturer. It is used to identify a device on a network, allowing communication between two or more devices that are connected to the same network.
The MAC address is composed of two parts: the first three octets (24 bits) are the Organizationally Unique Identifier (OUI), and the remaining three octets (24 bits) are the device's serial number. The OUI is assigned by the Institute of Electrical and Electronic Engineers (IEEE), which is the governing body that regulates networking protocols. The physical address of a device is also referred to as a MAC address.
To learn more about MAC address:
brainly.com/question/9617314
#SPJ12
Wood braces shall have a cross section of not less than _______ inches.
314.23(2)
Wood braces shall have a cross section of not less than 2 inches. This requirement is stated in section 314.23(2) of the National Electric Code. The purpose of the braces is to provide support and stability for electrical equipment and conduits, and it is important to ensure that they are strong enough to withstand the weight and force of the equipment.
The minimum cross section requirement helps to ensure that the braces are sufficiently robust and can effectively perform their intended function.
Electrical shock, burns, fires, and explosions are just a few of the risks that electrical equipment can present.
If someone comes in contact with an electrical current, they could experience an electrical shock. Even low voltage currents have the potential to be deadly. Burns can also happen if someone touches a hot object, like a lightbulb or a heating source.
If electrical equipment overheats or has broken wiring, it may potentially catch fire. Risks of property damage, injuries, and even death can result from this.
When electrical energy accumulates in a small area, such a transformer, capacitor, or battery, explosions may result. An abrupt release of energy.
Learn more about electrical equipment here
https://brainly.com/question/31256244
#SPJ11
7) Today, the most significant industrial asset of the Western Great Lakes region is itsA) Access to the nation's transportation networkB) Large market areaC) Proximity to essential raw materialsD) Skilled but expensive labor force
C) Proximity to essential raw materials is the most significant industrial asset of the Western Great Lakes region today.
The Western Great Lakes region of the United States is home to a diverse range of industries, including manufacturing, energy production, and transportation. However, one of the most significant assets of the region is its proximity to essential raw materials. The region is blessed with abundant reserves of iron ore, coal, and timber, which are the primary raw materials required for the production of steel, energy, and paper, respectively.
The Western Great Lakes region is also well-connected to the nation's transportation network, which has further boosted its industrial competitiveness. The region's location at the crossroads of major highways, railroads, and waterways allows for easy transportation of goods and materials to other parts of the country and beyond.
Moreover, the region's large market area, which includes major urban centers such as Chicago, Minneapolis, and Detroit, has further contributed to its economic success.
However, one of the challenges faced by the region is the cost of labor. While the labor force in the region is highly skilled, it is also relatively expensive compared to other parts of the country. Nevertheless, the region's abundant natural resources and excellent infrastructure continue to make it an attractive location for businesses seeking to establish or expand their operations.
Learn more about Western Great Lakes here:-brainly.com/question/31457838
#SPJ11
Another major high-speed network experimenting with long distance Ethernet over fiber is _____________.
a. AT&T
b. Sprint
c. Yipes
d. MCI WorldCom
e. the National Lambda Rail
the major high-speed network experimenting with long distance Ethernet over fiber is e. the National Lambda Rail.
NLR uses fiber-optic lines, and is the first transcontinental 10 Gigabit Ethernet network. Its high capacity (up to 1.6 Tbit/s aggregate), high bitrate (40 Gbit/s implemented; planning for 100 Gbit/s underway and high availability (99.99% or more), enable National LambdaRail to support demanding research projects. Users include NASA, the National Oceanic and Atmospheric Administration, Oak Ridge National Laboratory, and over 280 research universities and other laboratories. In 2009 National LambdaRail was selected to provide wide-area networking for U.S. laboratories participating in research related to the Large Hadron Collider project, based near Geneva, Switzerland.
It is primarily oriented to aid terascale computing efforts and to be used as a network testbed for experimentation with large-scale networks. National LambdaRail is a university-based and -owned initiative, in contrast with the Abilene Network and Internet2, which are university-corporate sponsorships. National LambdaRail does not impose any acceptable use policies on its users, in contrast to commercial networks. This gives researchers more control to use the network for these research projects. National LambdaRail also supports a production layer on its infrastructure.
learn more about Ethernet here:
https://brainly.com/question/14622272
#SPJ11
(300-10) All metal raceways, cable armor, boxes, fittings, cabinets and other enclosures for conductors must be _____ joined together to form a continuous electrical conductor.
All metal raceways, cable armor, boxes, fittings, cabinets, and other enclosures for conductors must be bonded together to form a continuous electrical conductor.
This requirement is specified in the National Electrical Code (NEC) to provide an effective path for fault current to flow, which helps protect against electrical shocks and reduces the risk of fire. Bonding ensures that metal parts are at the same electrical potential and eliminates potential differences that could cause arcing or sparking. Proper bonding also helps to reduce electromagnetic interference (EMI) and ensures that sensitive electronic equipment is not affected by stray electrical currents.
Learn more about bonded here;
https://brainly.com/question/28171147
#SPJ11
5224 - To produce the same lift while in ground effect as when out of ground effect, the airplane requires:- A lower angle of attack- the same angle of attack- a greater angle or attack
To produce the same lift while in ground effect as when out of ground effect, the airplane requires a lower angle of attack. This is because the ground effect reduces the drag on the airplane, allowing it to generate the same amount of lift with a lower angle of attack.
Ground effect is the phenomenon where the air pressure underneath the wings increases when the airplane is close to the ground, reducing the effective angle of attack required to generate lift. This happens because the ground limits the amount of air that can flow around the wings, which results in a decrease in wingtip vortices and an increase in the effective span of the wings. Therefore, since the airplane experiences an increase in lift when in ground effect, it needs a lower angle of attack to produce the same amount of lift as it would need when out of ground effect. In fact, if the pilot maintains the same angle of attack when in ground effect as when out of ground effect, the airplane may actually produce too much lift and become unstable.
Learn more about airplane here-
https://brainly.com/question/17247837
#SPJ11
PLC timers are ______ that provide the same functions as mechanical timing relays. Instructions.
PLC timers are content-loaded instructions that provide the same functions as mechanical timing relays. PLC (Programmable Logic Controller) timers are used in industrial automation to control the timing of events or processes based on predefined conditions.
PLC timers are typically implemented as software-based timers within a PLC programming environment and can be used to trigger actions or events based on time intervals or specific time conditions.
PLC timers can be broadly classified into two main types:
On-Delay Timer: An on-delay timer, also known as a delay-on timer, is used to introduce a delay before an action or event is triggered. When the timer is energized, it starts counting time based on a preset time value. Once the preset time has elapsed, the timer output is energized, which can be used to trigger an action or event, such as turning on a motor, opening a valve, or starting a process.
To learn more about Timers Here:
https://brainly.com/question/29645406
#SPJ11
For many​ firms, the five major nested processes of the Supplier Relationship Process are the organizational responsibility of which​ group?
For many firms, the five major nested processes of the Supplier Relationship Process are the organizational responsibility of the procurement or purchasing group.
This group is typically responsible for identifying, evaluating, selecting, and managing suppliers to ensure that the organization has access to the goods and services it needs to operate effectively. They also work to establish and maintain strong relationships with suppliers, negotiate contracts and pricing, and monitor supplier performance to ensure that quality and delivery expectations are met.
To learn more about procurement click the link below:
brainly.com/question/14291195
#SPJ11
The B phase shall be that phase having the _______ voltage to ground on 3 phase, 4 phase wire, delta connected systems.
408.3(e)
The B phase shall be that phase having the highest voltage to ground on 3 phase, 4 phase wire, delta connected systems.
According to the National Electrical Code (NEC) 408.3(e), the B phase shall be that phase having the high voltage to ground on 3 phase, 4 wire, delta-connected systems. In other words, when measuring the voltage between each of the three phases and ground, the phase with the highest voltage reading will be designated as the B phase. It is important to properly identify the phases in a three-phase system to avoid wiring mistakes and ensure safety. The NEC provides guidelines for color-coding the phases to help with identification. In a 3-phase, 4-wire system with a high leg, the high leg is typically colored orange to differentiate it from the other phases.
Learn more about voltage here-
https://brainly.com/question/29445057
#SPJ11
Life safety branch of the emergency systemshall supply power for all of the following except: ________________.
517.32
The Life safety branch of the emergency system shall supply power for all of the following except non-emergency loads. Non-emergency loads include equipment and appliances that are not essential for life safety, such as lighting for non-essential areas, heating and cooling systems, and other non-essential equipment.
The Life safety branch is critical to ensure that essential life safety systems such as emergency lighting, fire alarms, and communication systems remain operational during an emergency or power outage. It is important to note that the Life safety branch must be designed and installed according to specific codes and standards to ensure its reliability and functionality.
Therefore, it is important to consult with a qualified electrical engineer or contractor to ensure compliance with the applicable regulations and guidelines.
Learn more about power here : brainly.in/question/1888377
#SPJ11
Lock and key control procedures should include a key register and an authorized user list. True or False?
True. Lock and key control procedures should include a key register and an authorized user list, is true statement.
Lock and key control procedures typically require a key register to track the movement of keys and an authorized user list to ensure that only authorized personnel have access to the keys. The key register documents who has signed out which key and when, while the authorized user list specifies who is permitted to use the keys. These procedures help prevent unauthorized access to sensitive areas or assets and maintain accountability for key usage. By implementing these measures, organizations can improve their security posture and mitigate the risk of theft, loss, or misuse of keys.
learn more about authorized here:
https://brainly.com/question/14896494
#SPJ11
5750 - Choose the correct statement regarding wake turbulence:- Vortex generation begins with the initiation of the takeoff roll- The primary hazard is loss of control because of induced roll- The greatest vortex strength is produced when the generating airplane is heavy, clean, and fast
The correct statement regarding wake turbulence is: "The primary hazard is loss of control because of induced roll." Wake turbulence, caused by vortex generation, can pose a hazard to other aircraft, especially during takeoff and landing.
The induced roll from the wake turbulence can make it difficult for pilots to maintain control of their airplane. Vortex generation begins at rotation and continues as the airplane gains altitude. The primary hazard of wake turbulence is a loss of control due to induced roll, which can occur if an airplane encounters wake turbulence from a larger or heavier airplane. It is important for pilots to be aware of this hazard and take appropriate measures to avoid encountering wake turbulence.
Learn more about hazard here-
https://brainly.com/question/29602984
#SPJ11
The use of xray machine or metal detector to determine whether or not a person is bringing unauthorized items into an area is an example of this facility access control:
a. Identification Systems and Methods
b. Methods of Control
c. Entry and Exit Inspection
The use of x ray machine or metal detector to determine whether or not a person is bringing unauthorized items into an area is an example of Entry and Exit Inspection facility access control.
Your question is about the use of an xray machine or metal detector to determine if a person is bringing unauthorized items into an area. This is an example of facility access control known as: c. Entry and Exit Inspection system .
What does a metal detector do?
A metal detector detects metal by creating a magnetic field in it, and the receiver detects that magnetic field while showing its existence. Metal detectors are used in malls, airports, and train stations for screening.
To know more about system click here
brainly.com/question/30146762
#SPJ11
Fill in the blank.________ is a best-effort, connectionless application layer protocol that is used to transfer files.
FTP (File Transfer Protocol) is a best-effort, connectionless application layer protocol that is used to transfer files. Transmission Control Protocol/Internet Protocol (TCP/IP) is a set of communication protocols that are used to link network devices on the internet.
A TCP/IP network, such as the internet, uses the File Transfer Protocol (FTP) as a standard network protocol for file transfers between computers.
Network protocol:
A network protocol is a set of guidelines that governs data flow between two or more computing devices when they are connected to a computer network.
It is utilised for controlling files on distant computers as well as for uploading and downloading files. An FTP file transfer protocol client is used to connect to an FTP server in the client-server architecture of FTP. Users can upload, download, delete, or alter files on the remote computer once they are connected.
Learn more about file transfer protocol here
https://brainly.com/question/27581708
#SPJ11