Why does a match light when you strike it?

The correct IUPAC name for the given compound is 2-tert-butyl-3-chlorophenol.

The compound has a phenol ring substituted with a tert-butyl group at the second carbon atom and a chlorine atom at the third carbon atom.

According to the IUPAC nomenclature rules, we should first number the carbon atoms on the ring so that the substituents have the lowest possible locants. Since the tert-butyl group is at the second carbon atom and the chlorine atom is at the third carbon atom, we number the ring in such a way that the tert-butyl group gets the lower locant, and the chlorine atom gets the higher locant.

Thus, the compound is named as 2-tert-butyl-3-chlorophenol.

Click the below link, to learn more about IUPAC Nomenclature:

https://brainly.com/question/14379357

#SPJ11

The compound likely undergoes decomposition upon heating, releasing gas at 111-112 degrees C and leaving behind a solid residue. The solid then undergoes a second,  higher-temperature melting event at 155 degrees C,

which is broad due to the presence of impurities or the formation of a eutectic mixture. The initial decomposition may be due to the breaking of weak intermolecular bonds, the release of water or other volatile components, or a more complex melts with a broad range. Briefly explain these observations. decomposition pathway involving the cleavage of chemical bonds. The specific identity of the compound and its decomposition mechanism cannot be determined without further information or analysis.

Learn more about  compound   here:

https://brainly.com/question/13516179

#SPJ11

a. An organotroph growing anaerobically will choose to use the TCA cycle rather than fermentation during glucose catabolism when there is a suitable terminal electron acceptor available other than oxygen, which allows the cell to perform anaerobic respiration.

b. The three basic components of respiratory electron transport chains are electron donors, electron carriers, and terminal electron acceptors.

Three basic components of respiratory electron transport chains and what is the role of each one in electron transport and creating a PMF are:

a. Electron donors: These molecules, such as NADH or FADH₂, provide the initial source of electrons for the electron transport chain.

b. Electron carriers: These are protein complexes embedded in the membrane that transfer electrons from one carrier to another, facilitating the movement of electrons down the chain. Examples include cytochromes and quinones.

c. Terminal electron acceptors: These molecules, such as oxygen, nitrate, or sulfate, receive the electrons at the end of the electron transport chain. The transfer of electrons to the terminal acceptor helps generate a proton motive force (PMF) across the membrane, which can be used to generate ATP through oxidative phosphorylation.

Learn more about electron transport chains: https://brainly.com/question/12792516

#SPJ11

The statement that is NOT correct is D) In the lead (Pb) car battery, the chemistry involves lead in the 0, +3 and +5 oxidation states.

The correct oxidation states for lead in a lead-acid battery are 0 and +4, not +3 or +5. The negative electrode (the anode) is made of lead, and it undergoes oxidation to form lead sulfate (PbSO4) and release electrons. The positive electrode (the cathode) is made of lead dioxide (PbO2), and it undergoes reduction to form lead sulfate (PbSO4) and consume electrons. The electrolyte is a solution of sulfuric acid (H2SO4), which facilitates the movement of ions between the electrodes. The other statements are correct. A standard AA-sized battery is a Galvanic cell, which converts chemical energy into electrical energy. When a rechargeable battery is being charged, the setup is that of an electrolytic cell, which uses electrical energy to drive a non-spontaneous chemical reaction. In the rechargeable battery, the electrode which is the cathode during discharge becomes the anode during charging. In the [tex]H2/O2[/tex] fuel cell, the overall cell reaction is: 2 [tex]H2(g) + O2(g) → 2 H2O,[/tex]  which produces electrical energy from the reaction of hydrogen and oxygen.

Learn more about  oxidation states here:

https://brainly.com/question/17161178

#SPJ11

BaCrO_4 is insoluble in both acidic and neutral solutions. This is because BaCrO_4 is a salt that is highly insoluble in water due to its low solubility product constant (Ksp) value of 1.17 x 10^-10.

When BaCrO_4 is added to an acidic solution, it reacts with the hydrogen ions (H+) present in the solution to form chromic acid (H2CrO4) and barium ions (Ba2+). This reaction is represented by the following equation:
BaCrO4 + 2H+ → Ba2+ + H2CrO4
However, the formation of chromic acid does not increase the solubility of BaCrO_4, as both Ba2+ and H2CrO4 are also insoluble salts. In a neutral solution, BaCrO_4 does not undergo any significant reaction, and the salt remains insoluble. The BaCrO_4 particles may undergo some hydrolysis, but this does not increase their solubility in water.
Therefore, BaCrO_4 remains insoluble in both acidic and neutral solutions.

Learn more about acidic solution here:

https://brainly.com/question/13208021

#SPJ11

The statement "an increase in respiratory membrane thickness or a decrease in alveolar surface area will result in decreased oxygenation of the blood." is true.

The respiratory membrane is where gas exchange occurs between the air in the alveoli and the blood in the pulmonary capillaries. An increase in respiratory membrane thickness will make it more difficult for oxygen to diffuse across the membrane, while a decrease in alveolar surface area reduces the available space for gas exchange.

Both of these factors contribute to a decrease in the efficiency of oxygenation of the blood, leading to lower levels of oxygen being carried by hemoglobin in the bloodstream. Maintaining an optimal respiratory membrane thickness and alveolar surface area is crucial for effective gas exchange and oxygenation of the blood.

To know more about respiratory membrane click on below link:

https://brainly.com/question/31034482#

#SPJ11

Answer:

When the vessel contracts, the equilibrium will shift towards the side with fewer moles of gas, which is the right side in this case.

The net atp of one 1,3-bisphosphoglycerate (bpg) going through only glycolysis is 2 ATP.

To calculate the net ATP produced when one molecule of 1,3-bisphosphoglycerate (1,3-BPG) goes through only glycolysis, we can look at the steps involved in this process.

1,3-BPG is formed from the phosphorylation of 3-phosphoglycerate during glycolysis. From the 1,3-BPG point, there are two main steps that generate ATP:

1. The conversion of 1,3-BPG to 3-phosphoglycerate (3-PG) by the enzyme phosphoglycerate kinase. This step produces one molecule of ATP.
2. The conversion of phosphoenolpyruvate (PEP) to pyruvate by the enzyme pyruvate kinase. This step also produces one molecule of ATP.

Since there are two ATP molecules produced from these steps, and the entire glycolysis pathway (starting from one glucose molecule) produces four ATP molecules in total, the net ATP yield for one 1,3-BPG going through only glycolysis is 2 ATP molecules.

Know more about ATP here:

https://brainly.com/question/14479867

#SPJ11

The pOH of the solution at 25.0°C that contains 2.95 x [tex]10^{-12[/tex] M hydronium ions is: 2.47. the correct option is (e).

To calculate the pOH of a solution at 25.0°C that contains 2.95 x  [tex]10^{-12[/tex] M hydronium ions, we first need to calculate the concentration of hydroxide ions using the equation:
Kw = [H+][OH-]
where Kw is the ion product constant for water at 25°C (1.0 x [tex]10^{-14[/tex]),
[H+] is the concentration of hydronium ions (2.95 x [tex]10^{-12[/tex] M), and
[OH-] is the concentration of hydroxide ions (unknown).

Rearranging the equation to solve for [OH-], we get:
[OH-] = Kw / [H+]
[OH-] = 1.0 x [tex]10^{-14[/tex] / 2.95 x [tex]10^{-12[/tex]
[OH-] = 3.39 x [tex]10^{-3[/tex] M

Now that we know the concentration of hydroxide ions, we can calculate the pOH using the equation:
pOH = -log[OH-]
pOH = -log(3.39 x [tex]10^{-3[/tex])
pOH = 2.47

To know more about "pOH" refer here:

https://brainly.com/question/1832304#

SPJ11#

The value of ΔSuniv is the change in entropy of the universe, which is a measure of the degree of disorder or randomness that occurs during a chemical or physical process. So ΔSuniv = -127 J/K

The calculation of ΔSuniv involves using the equation ΔSuniv = ΔSsys - (ΔHsys / T), where ΔSsys is the change in entropy of the system and ΔHsys is the change in enthalpy of the given system. Plugging in the given values and converting ΔH∘rxn to J gives

The negative value of ΔSuniv indicates that the process is not spontaneous at the given temperature and pressure.  Conversely, a negative value of ΔSuniv indicates that a process decreases the degree of disorder in the universe, which means that it is non-spontaneous under the given conditions.

Learn More about entropy

https://brainly.com/question/6364271

#SPJ4

(a) The molar mass of Li2CO3 can be calculated by adding the atomic masses of 2 Li atoms, 1 C atom, and 3 O atoms:

Molar mass of Li2CO3 = 2(6.941 g/mol) + 1(12.011 g/mol) + 3(15.999 g/mol) = 73.89 g/mol

Therefore, the molar mass of Li2CO3 is 73.89 g/mol.

(b) The molar mass of KNO3 can be calculated by adding the atomic masses of 1 K atom, 1 N atom, and 3 O atoms:

Molar mass of KNO3 = 1(39.0983 g/mol) + 1(14.0067 g/mol) + 3(15.999 g/mol) = 101.103 g/mol

Therefore, the molar mass of KNO3 is 101.103 g/mol.

(c) The molar mass of Mg3N2 can be calculated by adding the atomic masses of 3 Mg atoms and 2 N atoms:

Molar mass of Mg3N2 = 3(24.305 g/mol) + 2(14.007 g/mol) = 100.949 g/mol

Therefore, the molar mass of Mg3N2 is 100.949 g/mol.

Learn more about molar mass here:

https://brainly.com/question/22997914

#SPJ11

The gases in order of increasing density at STP are NH₃ < N₂ < Kr < N₂O₄. The correct answer is option d.

To place the given gases in order of increasing density at STP, we need to consider their molar masses, as density is directly proportional to molar mass at constant temperature and pressure. Here are the molar masses of the gases:
N₂: 28 g/mol
NH₃: 17 g/mol
N₂O₄: 92 g/mol
Kr: 83.8 g/mol

The density of a gas can be calculated using the ideal gas law:

PV = nRT

where P is the pressure of the gas, V is its volume, n is the number of moles of the gas, R is the ideal gas constant, and T is the temperature of the gas in kelvin.

Rearranging the ideal gas law, we get:

n/V = P/RT

The quantity n/V represents the molar density of the gas, which is the number of moles of gas per unit volume. Multiplying this quantity by the molar mass of the gas (M) gives the mass density of the gas (ρ):

ρ = (n/V) x M

Now, we can arrange them in order of increasing density:

NH₃ < N₂ < Kr < N₂O₄

Therefore option d is the correct answer.

Learn more about density:

https://brainly.com/question/1354972

#SPJ11

The correct answer is E) N has a half-filled subshell, which makes it harder for nitrogen to gain an additional electron and results in a less exothermic electron affinity compared to carbon.

The electron affinity is defined as the energy change that occurs when an atom gains an electron in the gas phase. The electron affinity of an atom depends on various factors, such as the electron configuration, atomic size, and nuclear charge.

In the case of C and N, both elements belong to the same period of the periodic table and have the same valence electron configuration (2s22p2). However, nitrogen has one more electron in its atomic structure compared to carbon.

When nitrogen gains an additional electron to form the N- ion, this electron occupies the 2p subshell, which is already half-filled. As a result, there is a strong repulsion between the added electron and the electrons already present in the 2p subshell, making it more difficult for the nitrogen atom to gain an electron. This makes nitrogen's electron affinity less exothermic than carbon.

On the other hand, when carbon gains an electron to form the C- ion, the added electron goes into the 2p subshell, which is not half-filled. As a result, there is less repulsion between the added electron and the electrons already present in the 2p subshell, making it easier for the carbon atom to gain an electron. This makes carbon's electron affinity more exothermic than nitrogen.

learn more about electron affinity here:

https://brainly.com/question/977718

#SPJ11

The correct statements that describe the ball and chain model of channel inactivation are:
- After depolarization and channel opening, the inactivation gate soon occludes the open channel.
- A mutation causing the loss of the inactivation gate in K^+ channels could result in a membrane that undergoes repolarization more slowly.

Based on the provided statements, the following correctly describe the ball and chain model:

1. After depolarization and channel opening, the inactivation gate soon occludes the open channel.
2. A mutation causing the loss of the inactivation gate in K^+ channels could result in a membrane that undergoes repolarization more slowly.

The other statements are not accurate descriptions of the ball and chain model. The inactivation gate can inactivate a channel regardless of whether it has closed in response to depolarization. Additionally, a shorter tether or chain peptide strand attached to the inactivation domain would likely decrease, not increase, the time required to inactivate the K^+ channel.

To know more about Ball and Chain Model:

https://brainly.com/question/30255886

#SPJ11

Okay, let's go through each option step-by-step:

(a) 140 gm N2 & 35 g H2

since the stoichiometry is 2NH3 : 3H2 : N2, for every 2 moles of NH3 produced, 3 moles of H2 and 1 mole of N2 react.

So, 140 gm N2 = 10 moles N2

35 gm H2 = 3 moles H2

Together they can produce 10/2 = 5 moles NH3. So this option produces the same amount of NH3.

(b) 18 g H2 & 52 g N2

H2 has 3 moles per 35 g so 18 g H2 = 2 moles H2

52 g N2 = 4 moles N2

Producing 2 * (2/3) = 4/3 = 2 moles NH3. This is less than options a and c.

(c) Total 20 moles of mixture having N2 and H2 in stoichiometric ratio.

With 20 moles total and in stoichiometric ratio, the moles of each will produce 2 moles of NH3. So this option also produces the same.

(d) 136 gm of mixture having mass fraction of H2 = 6/34

* Total mass = 136 g

* Mass fraction of H2 = 6/34 = 0.18

* So mass of H2 = 0.18 * 136 = 24 g

* Mass of 24 g H2 = 2 moles H2

* Remaining mass = 136 - 24 = 112 g is N2

* 112 g N2 = 8 moles N2

* Together 2 moles H2 and 8 moles N2 can produce 2 * (2/3) = 4/3 = 2 moles NH3.

This is less, so this option does not produce the same amount.

In summary, options a and c satisfy the criteria of producing the same amount (i.e. 5 moles) of NH3.

Let me know if this helps explain the problem! I can provide more details if needed.

Answer:

P5S4

Explanation:

Penta means 5 and tetra means 4, therefore P5S4

When a direct current is passed through a 1.00 M aqueous solution of lithium chloride (LiCl), chlorine gas is observed as a product at the anode. Based on this information, lithium (Li) is formed at the cathode,

Correct justification is as follows:
1. In the electrolysis process, the anode is the positive electrode, and the cathode is the negative electrode.
2. Lithium chloride (LiCl) dissociates into lithium ions (Li+) and chloride ions (Cl-) in the aqueous solution.
3. Chlorine gas (Cl2) is produced at the anode due to the oxidation of chloride ions (2Cl- → Cl2 + 2e-).
4. Since chlorine gas is produced at the anode, the remaining lithium ions (Li+) in the solution will move towards the cathode.
5. At the cathode, lithium ions (Li+) are reduced to form lithium (Li) by gaining an electron (Li+ + e- → Li).

Therefore, lithium (Li) is the chemical species that is formed at the cathode during this process.

To know more about lithium chloride- https://brainly.com/question/28955893

#SPJ11

(a) In the Ag-Cu voltaic cell, the copper electrode serves as the cathode since Cu2+ ions are reduced to Cu(s) on the copper electrode. In the Ag-Co voltaic cell, the cobalt electrode serves as the anode since Co(s) is oxidized to Co2+ ions.

(b) The highest voltage is generated by the Ag-Zn voltaic cell because the reduction potential of Ag+ is higher than that of Zn2+. The lowest voltage is generated by the Cu-Co voltaic cell because the reduction potential of Co2+ is higher than that of Cu2+.

A voltaic cell, also known as a galvanic cell, is an electrochemical cell that converts chemical energy into electrical energy. It consists of two half-cells, each containing an electrode and an electrolyte solution. The two half-cells are connected by a salt bridge or porous membrane to allow for ion flow between them. In a voltaic cell, a spontaneous redox reaction occurs, which generates an electric potential difference between the two electrodes. This potential difference drives the flow of electrons through an external circuit, which can be used to power devices or perform work.

Visit here to learn more about voltaic cell brainly.com/question/1370699

#SPJ11

The molecules of [tex]C_{2}H_{6}[/tex] required to react with 5.6 mol of [tex]O_{2}[/tex] is [tex]9.6*10^{23}[/tex]. This is obtained when Avogadro's number is considered.

Here the balanced chemical reaction is [tex]2C_{2}H_{6} +7O_{2} +4CO_{2} +6H_{2}O > > > > 4CO_{2} + 6H_{2}O[/tex]

Here, 7 moles of [tex]O_{2}[/tex] reacts with 2 moles of [tex]C_{2}H_{6}[/tex], if we start with 5.6 mol of [tex]O_{2}[/tex] we get

[tex]\frac{5.6*2}{7}[/tex]

= 1.6 moles

To find the molecules multiply this with Avogadro's number we get

[tex]9.6*10^{23}[/tex]

The proportionality factor that connects the number of constituent particles in a sample with the amount of substance in that sample is known as the Avogadro constant, also known as NA or L. [tex]6.02214076*10^{23}[/tex]reciprocal moles is the precise value of this SI defining constant.

Avogadro's number can be multiplied or divided to convert between molecules and moles: Adding [tex]6.02214076*10^{23}[/tex]to the number of moles will convert it to molecules. Divide the number of molecules by [tex]6.02214076*10^{23}[/tex] in order to convert that number to moles.

For more information on Avogadro's number kindly visit to

https://brainly.com/question/11907018

#SPJ1

Without knowing the specific reaction sequence, it is impossible to determine the major organic product. However, it is important to note that the Dean-Stark trap is used to continuously remove water formed in the reaction to shift the equilibrium towards the formation of the desired product. This can have a significant impact on the yield and selectivity of the reaction.

A major organic product is the primary compound formed during a chemical reaction involving organic molecules. The reaction sequence is a series of chemical reactions that lead to the formation of the major product. The Dean-Stark trap is a device used in chemistry to continuously remove water generated during a reaction, allowing the reaction to proceed towards completion. It is commonly used in reactions where water is a byproduct and its removal helps drive the reaction forward.

To learn more about equilibrium visit;

https://brainly.com/question/30807709

#SPJ11

When solid carbon dioxide (dry ice) vaporizes to gas, it undergoes a phase change from solid to gas without melting into a liquid. This process is called sublimation.

To calculate the volume of gas produced, we can use the ideal gas law:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles of gas, R is the gas constant, and T is the temperature in Kelvin.

First, we need to determine the number of moles of gas produced. We can use the molar mass of carbon dioxide to convert from mass to moles:

moles of CO₂ = mass of dry ice / molar mass of CO₂

moles of CO₂ = 500.0 g / 44.0 g/mol

moles of CO₂ = 11.36 mol

Since the dry ice sublimes directly to a gas, all of the moles of CO₂ will be in the gas phase.

Next, we can plug in the values we know into the ideal gas law:

PV = nRT

V = nRT / P

where R is the ideal gas constant, which has a value of 0.08206 L·atm/(mol·K).

Converting the temperature to Kelvin:

T = 25.0 °C + 273.15 = 298.15 K

Plugging in the values:

V = (11.36 mol) x (0.08206 L·atm/(mol·K)) x (298.15 K) / (1.75 atm)

V = 439.4 L

Therefore, the volume of gas produced is approximately 439.4 L.

When solid carbon dioxide (dry ice) vaporizes to gas, it undergoes a phase change from solid to gas without melting into a liquid. This process is called sublimation.

To calculate the volume of gas produced, we can use the ideal gas law:

PV = nRT

where P is the pressure, V is the volume, n is the number of moles of gas, R is the gas constant, and T is the temperature in Kelvin.

First, we need to determine the number of moles of gas produced. We can use the molar mass of carbon dioxide to convert from mass to moles:

moles of CO₂ = mass of dry ice / molar mass of CO₂

moles of CO₂ = 500.0 g / 44.0 g/mol

moles of CO₂ = 11.36 mol

Since the dry ice sublimes directly to a gas, all of the moles of CO₂ will be in the gas phase.

Next, we can plug in the values we know into the ideal gas law:

PV = nRT

V = nRT / P

where R is the ideal gas constant, which has a value of 0.08206 L·atm/(mol·K).

Converting the temperature to Kelvin:

T = 25.0 °C + 273.15 = 298.15 K

Plugging in the values:

V = (11.36 mol) x (0.08206 L·atm/(mol·K)) x (298.15 K) / (1.75 atm)

V = 439.4 L

Therefore, the volume of gas produced is approximately 439.4 L.

Learn more about temperature on:

https://brainly.com/question/7510619

#SPJ6

The following equation describes the equilibrium constant for the reaction NH4HS(s) NH3(g) + H2S(g):

Kc is equal to [NH3] [H2S]/[NH4HS].

An indicator of the location of an equilibrium in a chemical reaction is the equilibrium constant (Kc). Kc remains constant for a certain reaction at a specific temperature. The equilibrium concentrations of NH3, H2S, and NH4HS are utilised to compute Kc in the equation above. Each species' concentration is shown in brackets, and the units of Kc are determined by the units used for the concentrations.

According to the equation, Kc measures how much the reaction moves ahead or backward by comparing the product concentrations to the reactant concentrations. When Kc is high, the reaction greatly favours the products; when it is low, the reactants are significantly preferred.

learn more about equilibrium here:

https://brainly.com/question/30694482

#SPJ11

The standard cell potential, E°cell, is a measure of the tendency of a chemical reaction to occur spontaneously in a cell. It is defined as the difference in the standard electrode potentials of the two half-reactions

that make up the cell reaction. In the given reaction, 2AgCl(s) → 2Ag(s) + Cl2(g), two half-reactions can be identified: AgCl(s) + e- → Ag(s) + Cl-(aq) and Cl2(g) + 2e- → 2Cl-(aq). The standard electrode potentials for these half-reactions are -0.222 V and +1.36 V, respectively. To calculate the standard cell potential, the reduction half-reaction is flipped and multiplied by the stoichiometric coefficients to balance the electrons. Then, the standard electrode potentials of the half-reactions are added. In this case, the standard cell potential can be calculated as follows:

[tex]E°cell = E°(reduction) + E°(oxidation)= -0.222 V + (+1.36 V)= +1.14 V[/tex]

Therefore, the standard cell potential for the given reaction is +1.14 V. Since the value is positive, the reaction is spontaneous in the forward direction.

Learn more about  cell   here:

https://brainly.com/question/30046049

#SPJ11

The cosmic ray involved in the decay process of Nitrogen-15 to form Carbon is a high-energy proton. , Carbon-14 gets locked in organic material through the process of photosynthesis,

where plants take in carbon dioxide from the atmosphere, including the Carbon-14 isotope, and incorporate it into their tissues. Animals then eat the plants, incorporating Carbon-14 into their own tissues.

Carbon has a half-life of approximately 5,700 years. To determine how many half-lives are needed to leave behind approximately 1/8 of the original mass, we can use the formula:

N = (1/2)^n * N0

where N is the final mass, N0 is the initial mass, and n is the number of half-lives.

Setting N = 1/8 and N0 = 1, we get:

1/8 = (1/2)^n

Taking the logarithm of both sides, we get:

n = log(1/8) / log(1/2) = 3

Therefore, it would take three half-lives of Carbon-14 decay to leave behind approximately 1/8 of the original mass.

The equation for radioactive decay is given by:

N(t) = N0 * e^(-kt)

where N(t) is the amount of radioactive substance remaining at time t, N0 is the initial amount, k is the decay constant, and e is the base of the natural logarithm.

The half-life of the substance is related to the decay constant by the equation:

k = ln(2) / t1/2

where t1/2 is the half-life.

Substituting the given values, we get:

k = ln(2) / 24500 = 2.83 x 10^-5 / year

To find the time it takes for the substance to decay to 0.8 grams, we can use the equation:

0.8 = 1 * e^(-2.83 x 10^-5 t)

Taking the natural logarithm of both sides, we get:

ln(0.8) = -2.83 x 10^-5 t

Solving for t, we get:

t = -ln(0.8) / 2.83 x 10^-5 = 11,848 years

Therefore, it would take approximately 11,848 years for one gram of radioactive substance with a half-life of 24,500 years to decay to 0.8 grams.

Learn more about  Carbon   here:

https://brainly.com/question/14272000

#SPJ11

The arrangement oxides in each of the following groups of increasing basicity: (a) Al2O3 < SrO < Na2O. and (b)  CrO3 < CrO < Cr2O3.

First, we need to consider their positions in the periodic table and their metallic or non-metallic character and in general, basicity increases with increasing metallic character.  (a) Na2O, Al2O3, SrO: These oxides belong to Group 1 (Na), Group 2 (Sr), and Group 13 (Al) in the periodic table. Na2O is the most basic oxide due to sodium's high metallic character as a Group 1 element  and SrO, from Group 2, is less basic than Na2O but still exhibits basic behavior.  Al2O3, an amphoteric oxide from Group 13, is the least basic in this group, so, the order of increasing basicity for these oxides is Al2O3 < SrO < Na2O.

(b) CrO3, CrO, Cr2O3: These oxides are chromium compounds in different oxidation states, CrO3, a chromium(VI) oxide, has high oxidation state and is acidic. CrO, a chromium(II) oxide, is amphoteric, showing both acidic and basic properties. Cr2O3, a chromium(III) oxide, is basic but less basic compared to typical metallic oxides. The order of increasing basicity for these oxides is CrO3 < CrO < Cr2O3.

Learn more about periodic table at:

https://brainly.com/question/15987580

#SPJ11

Out of the given salts, pbcl2 and ni(oh)2 will be more soluble in an acidic solution than in pure water. This is because they are insoluble in pure water but can form soluble complexes with hydrogen ions in an acidic solution.

The other salts, baso3, caso4, and csclo4, are already soluble in pure water and their solubility will not be significantly affected by the presence of acid. Salts that will be more soluble in an acidic solution than in pure water are those that react with the acidic protons (H+) to form a more soluble product. In the given list, BaSO3 (barium sulfite) and PbCl2 (lead(II) chloride) will be more soluble in an acidic solution because the acidic protons react with the sulfite and chloride ions, respectively, forming more soluble products.

Learn more about Salts here: brainly.com/question/16446935

#SPJ11

The name of the compound CH₃CH₂C=CCH₂CHCH₃-OH is 4-hepten-2-ol (C).

To name this compound, follow these steps:

1. Identify the longest continuous carbon chain containing the functional group (OH): this is a 7-carbon chain, so the base name is "hept-".

2. Identify the functional group: alcohol (OH), which is indicated by the suffix "-ol".

3. Identify the position of the alcohol group: it's on the 2nd carbon, so the name becomes "hept-2-ol".

4. Identify the presence of a double bond: it's between the 4th and 5th carbons, so the name becomes "hept-4-en-2-ol".
5. Specify the position of the double bond by adding a number: "4-hepten-2-ol".(C)

To know more about functional group click on below link:

https://brainly.com/question/14618322#

#SPJ11

The entropy change (δso) at 201 K is -0.015 J/K.

To calculate δso at 201 K in J/K, we can use the following equation:

δgo = δho - Tδso

Where δho is the enthalpy change, δgo is the Gibbs free energy change, T is the temperature in Kelvin, and δso is the entropy change.

Substituting the given values, we get:

-162. kj = -159. kj - (201 K)δso

Solving for δso, we get:

δso = (-162. kj + 159. kj) / (201 K)

δso = -0.015 J/K

Therefore, the entropy change (δso) at 201 K is -0.015 J/K.

Learn more about δgo at https://brainly.com/question/9179942

#SPJ11

The velocity of propagation for disturbances on a transmission line refers to the speed at which electrical signals or electromagnetic waves travel along the transmission line.

your question is incomplete. The complete question may be as follows:

"What is the velocity of propagation for disturbances on the transmission line? (Use c = 1 ft/ns as the speed of light in a vacuum.)

vp = 0.5 ft/ns

vp = 1 ft/ns

vp = 0.25 ft/ns

vp = 2 ft/ns

QUESTION 8

How long does it take for a disturbance to traverse the entire length of the transmission line? Type your answer in nanoseconds to one place after the decimal."

know more about "velocity" here: https://brainly.com/question/24445340

#SPJ11

The velocity of propagation for disturbances on a transmission line refers to the speed at which electrical signals or electromagnetic waves travel along the transmission line.

your question is incomplete. The complete question may be as follows:

"What is the velocity of propagation for disturbances on the transmission line? (Use c = 1 ft/ns as the speed of light in a vacuum.)

vp = 0.5 ft/ns

vp = 1 ft/ns

vp = 0.25 ft/ns

vp = 2 ft/ns

QUESTION 8

How long does it take for a disturbance to traverse the entire length of the transmission line? Type your answer in nanoseconds to one place after the decimal."

know more about "velocity" here: https://brainly.com/question/24445340

#SPJ11