The fourth and fifth periods contain 18 elements rather than 8 as observed in the second and third period because of the accommodation of 10 additional electrons in the 3d orbital.
The number of orbitals that can be accommodated by s subshell is one, p subshell is three, d subshell is five and f subshell is seven.
In the second and the third period, the 2s subshell is filled with two electrons, 2p subshell with six electrons .So, the second period contains eight elements. The sequence in third period is similar to that of second period with additional filling of 3s and 3p subshell.
In the fourth period, electrons are first filled in the 4s subshell, only after that they can be filled in the 3d subshell. So, fourth period contains 18 elements , which is due to the additional 10 electrons in 3d subshell. This is similar in the case of fifth period also.
To know more about fourth and fifth period elements here
https://brainly.com/question/23277752
#SPJ4
which would behave the least like an ideal gas at room temperature
A Carbon dioxide
B helium
C hydrogen
D nitrogen
The least like an ideal gas at room temperature is Helium.
What is Helium?Helium (He), chemical element, inert gas of Group 18 (noble gases) of the periodic table. The second lightest element (only hydrogen is lighter), helium is a colourless, odourless, and tasteless gas that becomes liquid at −268.9 °C (−452 °F). The boiling and freezing points of helium are lower than those of any other known substance. Helium is the only element that cannot be solidified by sufficient cooling at normal atmospheric pressure; it is necessary to apply pressure of 25 atmospheres at a temperature of 1 K (−272 °C, or −458 °F) to convert it to its solid form.Helium is a chemical element with the symbol He and atomic number 2.
To learn more about substance refer to:
https://brainly.com/question/25677592
#SPJ1
A chemist reported that 100 gallons of a gas were available in a laboratory. Which property of the gas did the chemist report?
O Length
O Mass
O Temperature
O Volume
A chemist reported that 100 gallons of a gas were available in a laboratory, The property of the gas did the chemist report is volume option - D is correct answer.
Just what is volume?The space occupied by a three-dimensional object is measured using the scalar quantity known as volume. The volume of a liquid or gas is calculated using the container's capacity as the unit of measurement.
A state of matter known as gas lacks a consistent shape and a set volume. They are the least dense and have the most space between their moles.
A gallon is a unit of volume that is used in the American metric system. The volume of gas equals the sum of the moles of gas in the container, which contains 100 gallons of gas.
To know more about volume visit:
https://brainly.com/question/27025817
#SPJ4
In a random sample of 70 people, it was found that 44 of them were fans of the New York Yankees. What is the margin of error for the true proportion of all individuals who are fans of the New York Yankees?
A.
0.0088
B.
0.058
C.
0.063
D.
0.116
E.
0.173
The margin error of the population is 0.058. Option B
What is the margin of error?We know that the margin of error has to do with the allowance that has been given to accommodate the mistakes that can occur in a study. Let us note that the mistakes in the study may arise from a number of factors. One of the factors that could lead to the existence of error in the results of a study is a mistake when we reread off the values that we obtain from the study.
As such, we have;
M = √[p(1 - p)/n]
where:
p = sample proportion
n = sample size
We are given;
p = 44/70 = 0.6286
n = 70
Thus;
M = √[0.6286(1 - 0.6286)/70]
M = √0.003335172
M ≈ 0.058
This is now the margin of the error that we have in the study that has been done here.
Learn more about margin of error:https://brainly.com/question/29101642
#SPJ1
Describe the physical properties of matter using the graphic organizer below
indicate whether each property can be used to identify a substance, $6.6.864
Mass
Weights
Mass and Weight
Magnetism
Density
A quality of matter that is unrelated to a change in its chemical makeup is called a physical property. Density, color, hardness, melting and boiling points, and electrical conductivity.
What are the physical characteristics of matter and what do they mean?A quality of matter that is unrelated to a change in its chemical makeup is called a physical property. Density, color, hardness, melting and boiling points and electrical conductivity are a few common examples of physical qualities.
What matters? Give five instances of matter.A substance with a given mass and a certain volume in space is referred to as matter. Examples of matters are pens, pencils, toothbrushes, water, and milk, as well as vehicles like cars, buses, and bicycles. Therefore, the matter is divided into two categories: living and non-living.
to know more about physical properties here:
brainly.com/question/18327661
#SPJ1
Physical properties are characteristics of matter that are independent of changes in its chemical composition. Electrical conductivity, hardness, melt and boiling points, and density.
What do matter's physical properties signify, and what are they?Physical properties are characteristics of matter that are independent of changes in its chemical composition. Physical characteristics include things like density, color, durability, melting , boiling temperatures, and electrical conductivity, to name a few.
Which matters? Give five examples of the subject.Matter is defined as a material having a certain mass and spatial volume. Pencils, pencils, toothbrushes, water, milk, as well as automobiles, buses, and bicycles, are examples of matters.
To know more about physical properties here:
brainly.com/question/18327661
#SPJ1
How many ATP are directly generated in the Krebs cycle when 2 molecules of glucose are oxidized?
4 ATP molecules are directly generated in the Krebs cycle when 2 molecules of glucose are oxidized
How Krebs cycle move to produce glucose molecule?The Krebs cycle, TCA cycle or the citric acid cycle, is a series of enzyme-catalyzed reactions occurring in the mitochondrial matrix and involves the oxidation of acetyl-CoA.
The acetyl group of acetyl-CoA is oxidized to make two molecules of CO2 in a succession of eight steps, while also producing one ATP. Additionally, reduced high-energy molecules like NADH and FADH2 are created.
Each glucose molecule produces two acetyl-CoA molecules, the Krebs cycle must move twice for one glucose molecule to produce the four CO2, six NADH, two FADH2, and two ATPs.
For more information on ATP visit: https://brainly.com/question/14637256
#SPJ4
what will the boiling point of CHCL3 be when the atmospheric pressure exerted on its surface is 101.325
The boiling point of CHCl₃ at a pressure of 101.325 kPa is 61.8°C (143.24°F).
What is boiling point?The boiling point is the temperature at which the pressure exerted on a liquid by the environment equals the pressure exerted by the vapor of the liquid. Under these conditions, the application of heat converts the liquid to vapor without raising the temperature.
At any temperature, the liquid partially vaporizes into the space above until the pressure exerted by the vapor reaches a characteristic value called the vapor pressure of the liquid at that temperature. As the temperature rises, the vapor pressure increases. At boiling point, vapor bubbles form in the liquid and rise to the surface.
The boiling point of a liquid changes along the pressure. The normal boiling point is the temperature at which the vapor pressure equals normal atmospheric pressure at sea level (760 mm [29.92 inches] of mercury). At sea level, water boils at 100°C (212°F).
To learn more about boiling point,
https://brainly.com/question/28267496
#SPJ4
The complete question is as follows:
What will the boiling point of CHCL3 be when the atmospheric pressure exerted on its surface is 101.325 KPa?
Determine the number of atoms of each element in the following:4P4O10
Answer:
16 P
40 O
Explanation:
You have 4 moles of P4O10
Therefore you multiply the subscript of each atom of the compound by 4.
There are 4 phosphorus atoms in 1 mole of P4O10 so in 4 moles you would have 4*4 atoms so 16
There are 10 oxygen atoms in 1 mole of P4O10 so in 4 moles you would have 4*10 so 40
In the lab, chemist analyzed a sample of methanol and found that it was made of 6. 20 g of carbon, 4. 10 g of hydrogen, and 15. 90 g of oxygen. What is the percent composition of each element? Round each answer to the tenths place
The percentage composition of carbon is 19.37% and percentage of oxygen is 49.68% and percentage composition of hydrogen is 12.8%.
According to question,
6.20g of carbon, 4.10g of hydrogen and 15.90g of oxygen is present in total sample of methanol.
Total mass of methanol is=mass of carbon x 1+ mass of oxygen x 1+mass of hydrogen x 4
Total mass= 12x1+16x1+1x4
Total mass=32g
Now, to find the percentage composition of each element use the total mass and given mass of element.
The ratio of the amounts of each element to the sum of the individual element amounts present in the compound, multiplied by 100, is the definition of the percentage composition of a given compound. In this instance, the quantity is expressed in gram of the constituent ingredients.
Percentage composition[tex]=\frac{mass of an element}{total mass}*100[/tex]
Percentage composition of carbon=[tex]\frac{6.20}{32} *100[/tex]
On solving we get,
Percentage composition of carbon=19.37%
Percentage composition of oxygen=[tex]\frac{15.90}{32}*100[/tex]
On solving we get,
Percentage composition of oxygen=49.68%
Percentage composition of hydrogen=[tex]\frac{4.10}{32}*100[/tex]
On solving we get,
Percentage composition of hydrogen=12.8%
Learn more about percentage composition
brainly.com/question/1350382
#SPJ4
Help would be greatly appreciated
How many moles of Zn(NO3)2 form from 7.0 mol AgNO3?
The correct answer is 7.0 moles of AgNO3 will form 7.0 moles of Zn(NO3)2,
What is mole ratio?Mole ratio is the ratio between the number of moles of two substances that are involved in a chemical reaction. It is an important concept in stoichiometry, which is the study of the relationship between the amounts of reactants and products in a chemical reaction. Mole ratio is often expressed as a fraction, in which the numerator is the number of moles of one substance, and the denominator is the number of moles of the other substance.
Since the reaction is a 1:1 mole ratio of reactant to product:
AgNO3 → Zn(NO3)2
7.0 mol AgNO3 → 7.0 mol Zn(NO3)2
To learn more about mole ratio
https://brainly.com/question/19099163
#SPJ1
A semen sample is received in the laboratory for evaluation of fertility. No sperm are observed upon initial microscopic examination of the sample. How should you proceed
Laboratories are used in many different fields, including medicine, chemistry, biology, physics, engineering, and more.
What is laboratory?A laboratory is a facility where scientists conduct research and experiments. It is equipped with specialized equipment, tools, and supplies required for the specific purpose of conducting scientific tests, experiments, and analysis.
The next step would be to look for other seminal components, such as white blood cells, red blood cells, epithelial cells, and other organic and inorganic components. If no sperm are present, then a detailed analysis of the sample is necessary to determine the cause of the absence of sperm. Possible causes of azoospermia, or the absence of sperm, include hormonal imbalance, anatomical defects, genetic conditions, and medical treatments.
To learn more about laboratory
https://brainly.com/question/10714321
#SPJ4
Is an irony on the discrepancy between the expected result and actual result?
Irony of situation is a discrepancy between the expected result and actual results. Irony involves the perception that things are not what they are said to be or what they seem.
What is irony?One thing is expressed while another is meant in an ironic statement. For example, on a chilly, wet gray day, you would exclaim, "What a gorgeous day!" Alternatively, if you were suffering from a severe case of food sickness, you may respond, "Wow, I feel terrific today." "ffers points of view and ideas that are, at most, intriguing... However, it does not reach the truth." Ronagh and Souder are particularly concerned with scientific assertions that are not meant to be taken seriously.
Here,
The irony of the issue is the difference between the expected and actual results. Irony is the impression that things are not what they appear to be or what they are purported to be.
To know more about irony,
brainly.com/question/1695719
#SPJ4
For the reaction given below, 2.00 moles of A and 3.00 moles of B are placed in a 6.00-L container. At equilibrium, the concentration of A is 0.246 mol/L. What is the concentration of B at equilibrium? A) 0.246 mol/L B) 0.325 mol/L C) 0.500 mol/L D) 0.492 mol/L E) none of these
The equilibrium concentration of B is 0.325 mol/L.
The correct option is B.
What is the equilibrium concentration of B in the given reaction?The equilibrium concentration of B in the given reaction is calculated below as follows:
The concentration of A at equilibrium, [A] = 0.246 mol/L
Constructing an ICE table
A(g) + 2B (g) → C(g)
I 2 mole 3 moles -
C 0.524 1.048 0.524
E 0.246 (3 - 1.048) / 6
From the equation of the reaction:
(2 - x) / 6L = 0.246 mol/L
2 - x = 0.246 * 6
2 - x = 1.476
x = 2 - 1.476
x = 0.524 moles
[B] = (3 - 1.048) / 6
[B] = 0.325 mol/L
Learn more about equilibrium concentration at: https://brainly.com/question/19340344
#SPJ1
Complete question:
For the reaction given below, 2.00 moles of A and 3.00 moles of B are placed in a 6.00-L container.
A(g) + 2B(g) C(g)
At equilibrium, the concentration of A is 0.246 mol/L. What is the concentration of B at equilibrium? A) 0.246 mol/L B) 0.325 mol/L C) 0.500 mol/L D) 0.492 mol/L E) none of these
Elements 'X', 'Y' and 'Z' have these atomic radii, in nanometers. X 0.072 nm Y 0.099 nm Z 0.111 nm
When atomic radii are correctly arranged, how might these elements appear in the periodic table? Why?
Elements 'X', 'Y' and 'Z' have these atomic radii, in nanometers. X 0.072 nm Y 0.099 nm Z 0.111 nm. When atomic radii are correctly arranged, the elements appears as z , y and then x across the period.
The atomic radii decreases across the period as we move from the left to right in the periodic table. the atomic radii will decreases as we move from the left to the right in the periodic table because in the period from the left to right the number of the electron will increases.
Thus, the order of the given elements arranged in the period in the periodic table as first z , then y and then x.
To learn more atomic radii here
https://brainly.com/question/29968959
#SPJ4
Which of the following alkenes cannot be converted into an alkyne by reacting it with bromine followed by an excess of sodium amide and then with water? X X II III DIVE, III and IV II &IX
Among the following alkenes (D) IV cannot be converted into an alkyne by reacting it with bromine followed by an excess of sodium amide and then with water.
An alkene must first be brominated by an addition reaction that produces a vicinal dibromide in order to transform it into an alkyne. All alkenes that have at least one double bond double substituted render them unsuitable for this method due to the requirement of this vicinal dibromide. This is so that the alkane can undergo a double elimination and produce an alkene, which needs at least one C-H and C-X bond. This hinders the conversion of molecule IV into an alkyne.
The dibromo alkane would change into the provided alkene by losing one unit of HBr if it were to react with bromine. However, the second beta-elimination cannot take place since there isn't hydrogen that is physically linked to the alkene carbon. So (D) IV is the right option.
You can also learn about dibromide from the following question:
https://brainly.com/question/11530316
#SPJ4
A polymer has a relative molecular mass of 112000.Calculatethe number of monomers{C=12, H=1}
The hybridization of orbitals on the central atom in a molecule is sp. The electron-domain geometry around this central atom is ________.
A molecule's core atom experiences sp orbital hybridization. Around this primary atom, the geometry of the electron domain is linear.
In chemistry, hybridization is the idea of combining two atomic orbitals to create a new class of hybridized orbitals. Usually, this mixing creates hybrid orbitals with completely distinct energies, forms, etc. In hybridization, the same energy-level atomic orbitals are primarily involved. However, assuming they contain equal energy, both fully-filled and half-filled orbitals can participate in this process.
When two atomic orbitals unite to generate a hybrid orbital in a molecule, the energy of the orbitals of the individual atoms is redistributed to give orbitals of equivalent energy. Hybridization is the name given to this process. Atomic orbitals with similar points are brought together during the hybridization process.
Learn more about hybridization here:
https://brainly.com/question/29591951
#SPJ4
How many neutrons are there in 14 gram of c14?
48×10²³ neutrons are there in 14 gram of C14
Any material that is totally composed of the same kinds of atoms is said to be an element. For instance, the element carbon is made up entirely of carbon atoms. The number of protons in an atom is indicated by the element's atomic number. The quantity of protons and electrons inside a neutral atom must match.
Neutron in 14 grams of C14 can be calculate as follows:
Mass number (or atomic weight) of ₆C¹⁴ is 14.
we know that Avogadro number =6×10²³
The number of neutrons in 12g of ₆C¹⁴ can be calculate by multiplying the number of neutron to the avogadro number
The total amount of protons and neutrons makes up mass. There will thus be = 14 - 6 = 8 neutrons.
neutron = (A−Z)×6×1023=(14−6)×6×10²³=48×10²³
Learn more about neutron at brainly.com/question/29248303
#SPJ4
Write the expression for the solubility product constant for:Ca3(PO4)2 (s) 3Ca2+ (aq) + 2PO43- (aq)
The solubility product constant (Ksp) for a substance is the equilibrium constant for the reaction between the dissolved ions of the substance and its solid form. In the case of Ca3(PO4)2, the equation for the reaction in water is: Ca3(PO4)2 (s) ↔ 3Ca2+ (aq) + 2PO43- (aq)
The solubility product constant, Ksp, for this reaction is represented by the equation:
Ksp = [Ca2+]^3 * [PO43-]^2Where [Ca2+] represents the concentration of calcium ions in molarity and [PO43-] represents the concentration of phosphate ions in molarity.
Solubility refers to the maximum amount of a substance that can dissolve in a given solvent at a given temperature and pressure. For example, the solubility of sugar in water is the maximum amount of sugar that can dissolve in water at a given temperature and pressure. The solubility of a substance can be influenced by temperature, pressure, and the presence of other dissolved substances.
Learn more about solubility product here:
https://brainly.com/question/857770
#SPJ4
Which of the following elements will form positive ions Na N Cu Br
Answer:
Na, Cu, and Br will form positive ions
Explanation:
Na, Cu, and Br have more protons than electrons, so they will form positive ions.
Na, Cu, and Br are all elements that have an atomic number greater than their number of electrons. This means that they have more protons than electrons, so they will form positive ions when they react with other elements. Na will form Na+, Cu will form Cu+ and Br will form Br+.
Question 6
Since the Moon has no living organisms, which method would be best for determining the age of a Moon rock?
А
radioactive dating
B
law of superposition
С
density of sediment collection
D
fossil and mineral comparison
Me
Radioactive dating measures the rate of decay of radioactive materials in rocks.
What is radioactive dating?Radiometric dating, radioactive dating, or radioisotope dating is a technique used to date things such as rocks or carbon that included trace radioactive contaminants when they were produced. Radioactive dating is a technique for dating rocks and minerals that makes use of radioactive isotopes. This approach is appropriate for igneous and metamorphic rocks that cannot be dated using the sedimentary stratigraphic correlation method. There are around 300 naturally occuring isotopes known. The underlying idea behind radiometric dating is that you can compute the age of a sample by comparing the presence of a radioactive isotope within it to its known abundance on Earth and its known half-life (rate of decay).
Here,
Radioactive dating determines the rate at which radioactive elements in rocks decay.
To know more about radioactive dating,
https://brainly.com/question/27527601
#SPJ4
Select the correct answer. convection is a mode of heat transfer for which types of objects?
a. solids and liquids
b. gases and solids
c. gases only
d. liquids and gases e. liquids only
a). Convection is a mode or process of heat transfer for solids and liquids.
Convection is a process of heat transfer that occurs through the movement of fluids. It is the main mode of heat transfer in liquids and gases and is commonly used to transfer heat between two solid objects.
During convection, heat is transferred by the movement of particles or molecules in the fluid. The heat is transferred by the interaction of the particles or molecules with each other and the objects they come into contact with.
The particles or molecules that are hotter will transfer energy to the particles or molecules that are cooler. This causes the cooler particles or molecules to become hotter, resulting in heat transfer from one object to the other.
For more questions like Convection click the link below:
https://brainly.com/question/29645809
#SPJ4
Under identical conditions, separate samples of O2 and an unknown gas were allowed to effuse through identical membranes simultaneously. After a certain amount of time, it was found that 7.41 mL of O2 had passed through the membrane, but only 3.47 mL of of the unknown gas had passed through. What is the molar mass of the unknown gas
164 g is the molar mass of the gas that had passed through.
Effusion is defined as the pace at which a volume changes over time. We apply Graham's Law to determine the rate of gas diffusion. According to this law, the rate of a gas's effusion or diffusion is inversely related to the gas's molar mass squared.
[tex]\frac{Rate Gas 1}{Rate Gas 2}[/tex]=[tex]\frac{ \sqrt{MW gas 2} }{ \sqrt{MW gas 1} }[/tex]
Let gas 1 be Oxygen so Molar mass = 32 g / mol
Let x be gas 2. Molar mass = unknown
rate gas 1 = 7.41 ml/unit time
rate gas 2 = 3.47 ml / unit time
So, 7.41 / 3.47 = [tex]\frac{\sqrt{x} }{\sqrt{36} }[/tex]
2.135 = s[tex]\frac{\sqrt{x} }{\sqrt{36} }[/tex]
[tex]\sqrt{x}[/tex] = 12.81
so, x = 164 = molar mass of unknown gas
Learn more about Molar Mass
brainly.com/question/28884993
#SPJ4
How many atoms are there in a 2 moles of oxygen atoms? How many atoms are there in 2 moles of oxygen molecules?
For 2 moles of oxygen atoms, there are Avogadro's number (6.022 x 10^23) atoms. For 2 moles of oxygen molecules, there are twice that amount, or 12.044 x 10^23 atoms.
What are Atoms?
Atoms are the smallest particle of any element that still maintains the properties of that element. Atoms are made up of a nucleus surrounded by one or more electrons. The nucleus is composed of protons and neutrons, and the electrons orbit around the nucleus. Atoms of different elements have different numbers of protons, neutrons, and electrons, which is what gives them their unique properties.
To know more about atoms,
https://brainly.com/question/16666188
#SPJ4
How many protons are neutral in nitrogen?
A neutral atom of Nitrogen will have seven protons.
The symbol given for Nitrogen is N, the atomic number 7. Atomic number is equivalent to the number of protons in an atom. So, for Nitrogen, the number of protons is 7.
What is a neutral atom?A neutral atom is an atom which consists of the same number of protons and the same number of electrons. Neutral atoms will have the equal number of protons in the nucleus as they have electrons orbiting the nucleus.
In a neutral atom, the total charge on the atom is zero. Atom has same number of protons and electrons in it. For example, neutral atom of Sodium, with atomic number 11, has 11 protons and 11 electrons in its neutral state.
Learn more about protons at: https://brainly.com/question/12535409
#SPJ4
Write the entire chemical equation and label the reactants and products.
C3H8 + 5 O2 → 3 CO2 + 4 H2O
Answer:the equation is already balanced and the reactants are the C3H8+ 5 O2 and the products are 3CO2+ 4H2O
Explanation:
Identify at least two physical properties (streak, fracture, etc.) of a mineral while using examples of common minerals that prominently feature those properties. Provide links or screenshots of the discussed minerals to illustrate the highlighted properties. Also, explain what mineral group it belongs to and why.
The two physical properties of a mineral can be color, streak and even cleavage also.
Color, streak, cleavage, hardness, specific gravity, fracture, luster, and crystal structure are only a few of the many diverse characteristics. I'll speak specifically about color and shine as they relate to diamonds and how they significantly impact the value of the individual stone. Diamonds are a type of carbon polymorph.
Polymorphism, as used in materials science, refers to the fact that a solid material can exist in more than one crystal structure or form. Isomerism in the form of polymorphism. The phenomena can be seen in any crystalline substance. A chemical element's polymorphism is referred to as allotropy. Pharmaceuticals, agrochemicals, pigments, dyestuffs, meals, and explosives all have practical applications for polymorphism. "A reversible transition of a solid crystalline phase at a given temperature and pressure (the inversion point) to another phase of the same chemical composition with a different crystal structure," according to IUPAC, describes a polymorphic transition.
Learn more about physical properties
brainly.com/question/18327661
#SPJ4
A triatomic molecule is oriented as follows along the x-axis: mass m is at the origin, mass 2m is at x = a, and, mass 3m is at x = 2a. What is the moment of inertia of this molecule about the y-axis?
The moment of inertia of this molecule about the y-axis is 14ma^2.
The moment of inertia, also called angular mass or rotational inertia, of a rigid body refers to a quantity that determines the required torque for a desired angular acceleration about a rotational axis. Moment of inertia is the sum of the product of the mass of every particle with its square of a distance from the axis of rotation. Hence, moment of inertia of a system about an axis can be found by simply adding each of their moments, i.e., I = I1 + I2 + I3…+ In. Moment of inertia is given as: I = mr^2
Hence, based on given information:
I = m1(r1)^2 + m2(r2)^2 + m3(r3)^2
I = m(0)^2 + 2m(a)^2 + 3m(2a)^2
I = 2ma^2 + 12ma^2
I = 14ma^2
Learn more about Moment of inertia:
https://brainly.com/question/14460640
#SPJ4
The zeroth law of thermodynamics describes the state where we can say what about the movement of heat between two substances?
a. the latent heat is increasing
b. the movement of heat is rapid
c. there is no movement of heat
d. the latent heat is decreasing
e. the movement of heat is slow
There is no movement of heat. The Zeroth Law of Thermodynamics states that if two systems are in thermal equilibrium with a third system, then they are in thermal equilibrium with each other.
What is Thermodynamics?Thermodynamics is the study of energy and its transformations. It examines the relationships between heat, work, and other forms of energy. The fundamental laws of thermodynamics provide a framework for studying the behavior of systems, whether they are physical, chemical, or biological in nature. Thermodynamics helps us understand the behavior of gases, liquids, and solids and how they interact with each other. It also provides us with a way to analyze how energy is transferred and used in various processes.
In other words, no heat transfer takes place between two systems that are in thermal equilibrium.
To learn more about Thermodynamics
https://brainly.com/question/27386894
#SPJ4
What is the first thing you should do following an accident with a chemical?
Immediately rinse chemicals off with a lot of water.
Different assistance must be used because different chemical accidents might occur in various ways.
Help while inhaling a chemical:To provide the person access to fresh air, remove them from the factory or work location. Make sure your company has a plan in place for what to do if a worker becomes unconscious or is unable to move. If the person has inhaled chemicals, administer oxygen from an oxygen tank.
Help if a Chemical touch your skin:Immediately rinse chemicals off with lots of water for at least 15 minutes. The more quickly and for a longer period of time you start to pour water over the region, the more damage you will limit. Chemicals that catch fire or absorb quickly through the skin must be washed for a longer time, 30 minutes to 1 hour.
Help if chemical is in eye:Right away, rinse the eye or both eyes. Rinse for at least 15 minutes while using a lot of water. If you have an emergency eye wash, activate it while keeping your eyes open with your fingers. If you must use your hands to splash water in your eyes, keep them open while doing so. Seek assistance in keeping them open.
Help if chemical is in mouth:Look for the chemical label or any other relevant information. Typically, the label will provide information on "ingestion" in the first aid section. If the person should vomit up the chemical or not is determined there. It is crucial that you heed that counsel. If the chemical is consumed, the label can include an antidote. Give the remedy if you have it.
Learn more about ingestion visit:
brainly.com/question/23164645
#SPJ4
What are the 3 steps for treating a chemical burn?
Remove dry chemicals. Remove contaminated clothing or jewelry. Bandage the burn. Rinse again if needed.
A chemical burn is infection and destruction of human tissue because of exposure to a chemical, generally with the aid of direct contact with the chemical or its fumes. Chemical burns can occur in the domestic, at work or school, or as a result of an twist of fate or assault. although few humans in the united states of america die after contact with chemical substances in the home, many substances not unusual in both living and garage areas can do extreme damage.
To know more about chemicals click here
https://brainly.com/question/26487468
#SPJ4