Why do i pick the most exspensive hobbies
Airsoft and building pcs

Answer: You're question is very vague... be more specific in the problem, what is it asking you to do?

Explanation: This shouldn't be under "Engineering" you should put it under "Mathematics" for a better result. Sorry for the mix up! Hope this helps! ^^

The procedures that the technician should describe are:

This is known to be the method that employs the use of nuclear reactions to create or produce electricity.

Note that in the above scenario, The procedures that the technician should describe are:

This is because the coolant will help to reduce the heat level in the reactor and

the fuel rods is needed to power the reactor.

See full question below

In a safety seminar at a nuclear power plant, a technician describes the procedure used if temperatures in the reactor become too high. What procedures should the technician describe?Select all that apply.- May be more than one answer

a. More coolant will be pumped into the reactor.

b. The control rods will be taken out of the reactor

c.The fuels rods will be lowered into the reactor.

d. The control rods will be lowered into the reactor.

Learn more about  nuclear power from

https://brainly.com/question/24295936

#SPJ2

Answer:

Sweat

Explanation:

As you exercise you respire and warm up due to energy. In turn, two things happen, blood vessels vasodilate (irrelevant to you) and sweat glands sweat more. this sweat then evaporates and cools down the body.

Answer:

Hyperpnea is common during exercise

Explanation:

Edge 2023

Answer:

Thermal energy is measured using a thermometer denominated in Fahrenheit, Celsius and Kelvin

Answer:

Ea public address glven via the intercom system of a large buildingxplanation:

Answer:

A pan (baking)

Newspaper

Cloth

(colored) Water

A binder (to elevate one side of the pan)

Explanation:

hope this helps:)

No, the lengths of one house is not proportional to the lengths of the other house as they have different length.

House is known to be a form of dwelling or a residence where people are known to  live in.

Scale factors can be used tp show that the homes are not proportional as it will help one tp know which is smaller, and it will tell us the proportional measurements of the house.

Learn more about house from

https://brainly.com/question/1739912

#SPJ1

or...................

Answer:

i believe it is true

Explanation:

Answer:

[tex] \therefore [/tex] The power output of the draw-works motor is 4.36 hp

Explanation:

Given that,

As the problem given, the cable is tied of the top on the oil rig and it wraps around the lower pulley and the top pulley. So, we will be using the formula below:

Differentiate it but with respect to the time. Therefore,

Thus,

Thus, the power output should be

[tex] P = Fv = \bigg(\frac{600}{2}\bigg) \cdot 8 = 2400 \ lb \cdot ft/s = \frac{2400}{550} = 4.36 \ hp [/tex]

[tex] \therefore [/tex] The power output of the draw-works motor is 4.36 hp

A type of loop which Jamal will need to create in order to make the backdrop to continuously keep changing is: C. forever loop.

A forever loop can be defined as a type of loop which comprises a sequence of instructions that are written to run continuously or endlessly, until the simulation is quitted by an end user.

This ultimately implies that, a forever loop should be created by Jamal to  make the backdrop to continuously keep changing.

Read more on forever loop here: https://brainly.com/question/26130037

#SPJ1

Answer: C

Explanation:

To any of you who are also taking Game Design, I have respect for you.

Answer:

Typically, diesel trucks cost more than those with gas engines, especially when you're first buying them, as diesel is usually featured as an add-on for gas-powered cars. Diesel add-ons can cost over $5,000 for midsize trucks and around $10,000 for heavy-duty trucks.

Explanation:

Make me brain pls

A Thermostat refrigeration control device is used to make sure that the bearings in a compressor are receiving proper lubrication.

A tool for controlling the waft of refrigerant to the circuits of a multi-circuit evaporator in a refrigeration system, comprising an orifice plate having a refrigerant enlargement orifice and a distributor plate having passages into which interchangeable metering jets are inserted.

The thermostat controls the cooling system by tracking the temperature after which switching the compressor on and off. When the sensor senses that it is bloodless sufficient internal a refrigerator, it turns off the compressor. If it senses an excessive amount of heat, it switches the compressor on and starts off evolving the cooling system again.

Read more about the control device :

https://brainly.com/question/730146

#SPJ1

Answer:

A

Explanation:

The resulting output voltage (rms) when a 50 mV rms input applied is  -187.5 mV.

Root Mean Square Voltage is the amount of AC power which produces the same heating effect as DC Power would have produced.

Vo = -gm x Vi (Rd II Rl )

Vo = -5000 x  10⁻⁶ x 50 x 10⁻³ x (1.5k II 1.5k )

Vo = -25 x 10⁻² x 750 x  10⁻³

Vo = -187.5 mV

Hence, resulting output voltage (rms) when a 50 mV rms input applied is   -187.5 mV.

Learn more about rms voltage.

https://brainly.com/question/13507291

#SPJ1

The volumetric flow rate into the tank if the wine level remains constant at 2.5m is; 0.1232 m³/s

The formula for volumetric flow rate is;

V' = area * velocity

We are given;

Diameter; d = 15 cm = 0.15 m

Thus;

Area; A = (π/4)d²

A = (π/4)(0.15)²

A = 0.0176 m²

Velocity is; v = √(2gh)

v = √(2 * 9.8 * 2.5)

v = 7 m/s

Thus volumetric flow rate is;

V' = 0.0176 * 7

V' = 0.1232 m³/s

Read more about Volumetric Flow Rate at; https://brainly.com/question/15135598

#SPJ1

The main objective of phasing out an INDUCTION MOTOR is to identify the ends of the stator coils.

An induction motor is a device based on alternate electricity (AC) which is composed of three different stator coils.

An induction motor is a device also known as an asynchronous motor due to its irregular velocity.

In conclusion, the objective of phasing out an INDUCTION MOTOR is to identify the ends of the stator coils.

Learn more on induction motors here:

https://brainly.com/question/15721280

#SPJ1

The rigging device which are used to move loads without the use of slings, but grip the load by biting down and using jaw tension to secure the load, is lifting clamps.

The rigging devices are used to lift the objects and items when the safety is required. This device is used in the industries.

Types of rigging devices

Thus, the rigging device which are used to move loads without the use of slings, but grip the load by biting down and using jaw tension to secure the load, is lifting clamps.

Learn more about the rigging devices here;

https://brainly.com/question/8430576

#SPJ1

The flashing arrow panels are not used just at night but are used even during the day time. These are necessary to give the directional information to the drivers. Thus, the given statement is false.

The safety instructions are necessary for the drivers as absence of these would lead to increased number of accidents which could lead to death of a number of people. The flashing arrow panels is one of these instructions.

Flashing arrow panels are used during the day as well as at the night to give advance warning and directional information to the drivers where it is required to move to the right or to the left into another lane.

Some of the safety systems used at level crossings include amber and red warning lights on majority of roads, people should stop when the amber lights come on, unless vehicle has already crossed the stop line.

Learn more about Driving here:

https://brainly.com/question/2619161

#SPJ5

Answer:

Explanation:

the driver who obeys traffic laws

The action that inspire Ms. Shotwell is that Her mom took her to a trip to look at the  Society of Women Engineers event, and she was said to have quickly fall in love with a mechanical engineer who was a speaker in the event.

The LES is mad up to separate the spacecraft from the Falcon 9 rocket and  move the crew away to safety in case any event of any emergency.

SpaceX was said to be successful because:

Note therefore, that  the action that inspire Ms. Shotwell is that Her mom took her to a trip to look at the  Society of Women Engineers event, and she was said to have quickly fall in love with a mechanical engineer who was a speaker in the event.

Learn more about Engineers from

https://brainly.com/question/17169621

#SPJ4

You have been installed a chief in your hometown write a letter to your friend in another school telling him at least three things you intend doing to develop the town

Answer:

they probably have more sidewalks and traffic lights.

Explanation:

a lot of people live in urban areas.

Neoprene are gloves that are designed and developed to offer good pliability and protect against harmful elements e.g hydraulic fluids, gasoline and alcohols.

A glove can be defined as a personal protection equipment (PPE) that are worn on the hands (from the wrist to the fingers), so as to protect and safeguard it from potential burn and chemical hazards.

In Engineering, neoprene are type of gloves that are designed and developed to offer good pliability and protect against harmful elements such as:

Read more on neoprene here: https://brainly.com/question/3077381

#SPJ1

Both technicians A and B are correct. On most front wheels the replaceable sealed bearing is pressed between the hub and the wheel flange and is the more difficult to replace. Hence it is usually replaced as a unit.

The unitized wheel hub includes a sealed wheel bearing, a removable wheel hub, and possibly the wheel flange that can be unbolted.

Hence both technicians are correct.

Learn more about wheels and hubs at
https://brainly.com/question/15285468

#SPJ4

Explanation:

A factor of safety is the load-carrying capacity of a system beyond what the system actually supports. Bridges, buildings, safety equipment, and fall protection all start with a factor of safety.

Simply put, the safety factor is how much stronger a system is than required. The factor of safety is the backbone of all structures and safety equipment and originates with engineers. In the planning phase of all structures and safety equipment, engineers determine the required overload from any object to remain safe in the event of an emergency.

For reliability, structures are typically built stronger than necessary. This is in case a structure experiences a heavier-than-expected load. This is a factor of safety. Ultimately, the amount of stress and overload a structure can handle comes down to the material used to build it.

Determining the factor of safety:

Engineers perform strength tests to determine how much weight a material can handle. Certain materials are more ductile than others, meaning they deform to pressure before breaking more so than others, like brittle materials. Brittle materials simply break once they meet the maximum force.

Ductile materials use yield strength to determine the safety factor. Brittle materials use the ultimate strength.

Yield strength: Determines the safety factor until the start of deformation.

Ultimate strength: Determines the safety factor until failure.

Ductile materials often test the factor of safety against yield and ultimate strengths while brittle materials usually only calculate the ultimate safety factor since the yield and ultimate values are often so close.

The necessary factor of safety of any structure determines the materials used. If a structure has a high required factor of safety, then engineers use a ductile material to build it. The realized factor of safety determines the amount of material used.

Required (design factor): A constant value imposed by law or standard. A structure is required to meet this value at a minimum.

Realized

Answer:

Explanation:

Because there are no angles for alignment, the round shape makes these heavy covers easier to put back on once they're taken off. Round covers are also easier to manufacture. But the main reason manhole covers are round is so they won't accidentally fall into the manhole itself.

The principle of supply chain strategy is Segregate customers on the basis of service needs of different  groups and follow the supply chain to deliver   goods and services to the consumers profitably.

Supply chain is the group of activities performed by an organization to deliver goods and services to the consumer end.

Thus, one of the principle of supply chain strategy is separate the customers on the basis of service needs of different  groups and follow the supply chain to deliver goods and services to the consumers so that they earn profit.

Learn more about supply chain.

https://brainly.com/question/16023650

#SPJ1

The IC at the moment the ladder slides based on the lengths and other information given will be (0, 1.32)

From the information given, the calculation will be computed below:

l cos a = 1.5

cos a = 1.5/2

cos a = 0.75

a = 41.4°

ab = a/cos a = 1.5/cos41.4

ab = 1.5/0.75

ab = 2

b = 2 × sin 41.4

b = 2 × 0.66

b = 1.32

Therefore, the IC will be (0, 1.32).

Learn more about lengths on:

https://brainly.com/question/2217700

#SPJ1