I NEED HELP ASAP!!!!!!!!!!!!
WITHIN THE HOUR
Thanks
Kiera and Grace are sisters. They both have blue eyes. Kiera is extremely short for her age and Grace is exceptionally tall for her age. Develop a hypothesis as to why the sisters have different statures. Justify your hypothesis in two or more complete sentences.
The hypothesis as to why the sisters have different statures occurs because from genetics we know that it is linked to the alleles so one sister is shorter than the other one was they had different alleles.
What is the genetic similarity between siblings?On average, siblings share about 50% of their DNA with each other, but some siblings share even more and some less. So while we all have approximately 50% DNA from each parent, the segments we end up getting are completely random.
Hereditary character or gene that is manifested by the absence of the opposite gene, called dominant, in this case, Kiera is extremely short for her age.
See more about genetic at brainly.com/question/12985618
#SPJ1
what are the molecular structure,structural formula and strength of intermolecular forces for the substances methylated spirits,Acetone,water,glycerine and oil?
Answer:
Glycerine, water and methylated spirits have hydrogen bonds between the molecules. However, in water and Glycerine these intermolecular forces are very strong while in the methylated spirits they are slightly weaker. This leads to the higher boiling point for water and Glycerine.
Explanation:
In chemistry a molecular formula indicates every single atom and its numbers in a chemical compound. Hence the molecular formula C3H8O3 simply says that there are three carbon (C) atoms, eight hydrogen (H) atoms and three oxygen (O) atoms in this compound.
In a laboratory experiment, you perform the above reaction. However, you only get 7.50g of Al. What was the percent yield of that experiment?
Answer:
Explanation:
n a laboratory experiment, you perform the above reaction. However, you only get 7.50g of Al. What was the percent yield of that experiment?
In order to be healthy, humans must consume a variety of amino acids. any animal product, such as eggs, milk, and meat, contains all of these amino acids. however, consumption of a wide variety of plant products will also supply the necessary amino acids. describe two different meals you could enjoy that contain only plant products. make sure to include at least five different plants in each meal. (10 points) plants produce grains, vegetables, and fruits. meal two
Dish of Cabbage, carrot, pea, cauliflower and brinjal are the meals we could enjoy that contain only plant products.
Describe two different meals you could enjoy that contain only plant products?
Cabbage, carrot, pea, cauliflower and brinjal are the five different plants based meals. In these meals, vegetables are used which are the parts of plant. We know that vegetables are very healthy and nutritive which can be get from plants.
So we can conclude that dish of Cabbage, carrot, pea, cauliflower and brinjal are the meals we could enjoy that contain only plant products.
Learn more about meal here: https://brainly.com/question/25884013
#SPJ1
Does the size of the nucleus affect the possibility of nuclear fission or fusion happening?
(need help asap)
How much of each reactant(zinc and hydrochloric acid) is needed to produce 150 grams of hydrogen gas
Explanation:
150 grams is .15 liters
1 mole of gas at STP occupies 22.414 liters
.15 liter of hydrogen represents .15/22.414 =
0.0066922 moles of H2
equation is
Zn + 2HCl → ZnCl2 + H2
1 mole of Zn will make 1 mole of H2
0.0066922 moles of Zn will make 0.0066922 moles of H2
To convert this molar quantity of zinc into grams we simply multiply by the atomic mass of zinc, which is
65.38 g/mol;-
Mass of Zn required = 0.0066922 moles * 65.38 g/mol = 0.4375390381 grams
https://www.quora.com/How-many-grams-of-Zinc-would-you-need-to-react-with-Hydrochloric-acid-to-produce-1-L-of-H2-gas
Sulfuric acid can dissociate into _______ ions and hydrogen ions which lowers the ph causing acidic environments that are very harmful to many ecosystems.
Sulfuric acid can dissociate into hydronium ions (H3O+) and hydrogen sulfate ions (HSO4−).
Does sulfuric acid dissociate or ionize?
Sulfuric acid is a very strong acid which ionizes into hydronium ions (H3O+) and hydrogen sulfate ions (HSO4−) while on the other hand, in dilute solutions the hydrogen sulfate ions also dissociate, forming more hydronium ions and sulfate ions (SO42−).
So we can conclude that Sulfuric acid can dissociate into hydronium ions (H3O+) and hydrogen sulfate ions (HSO4−).
Learn more about acid here: https://brainly.com/question/25148363
#SPJ1
The speed limit on a certain highway is 72 km/h. what is the speed in cm/s?
Answer:
7.2e+6 cm (7200000cm)
Explanation:
Hope this is the answer your looking for ;)
What is the name of the colony shown?
Answer:
The one that is in dark green is (New Hampshire)
if that's not what tell me i will fix it
Hope This Helped
when 949 J of heat is added to 9 grams of oil at 37˚C , the temperature increases to 62˚C. What is the specific heat of the oil?
Answer:
4.21778 J/(g*C)
Explanation:
specific heat = joules / (mass times temperature change)
949 / (9 times 25)
949 / 225 =
4.21778
Lewis dot structure for H2CCCl2?
Answer:
Explanation:
lewis dot structure:
Carbon has 4 valence electrons and hydrogen has 1 electron. Therefore, in below given way, the lewis dot structure for H[tex]_2[/tex]CCCl[tex]_2[/tex] can be drawn.
What is Lewis dot structure?These illustrations, commonly referred to as lewis structures and electron dot structures, show how electrons are distributed and grouped around atoms.
You must be aware of the total amount of valence electron cloud in order to create the Lewis structure. Based on the atom's group number inside the periodic table, it is possible to determine how many valence electrons are present in a certain atom. Carbon has 4 valence electrons and hydrogen has 1 electron. The lewis dot structure for H[tex]_2[/tex]CCCl[tex]_2[/tex] is given below.
Therefore, in above given way, the lewis dot structure for H[tex]_2[/tex]CCCl[tex]_2[/tex] can be drawn.
To learn more about Lewis dot structure, here:
https://brainly.com/question/20300458
#SPJ2
What volume (in mL) of 0.750 M sodium hydroxide is needed to neutralize (react with) 275 ml of 0.500 M sulfuric acid (H2SO4)?
NaOH + H2SO4 -> H2O + Na2SO4
I NEED WORK
We know the formula
C1V1=C2V2C is concentration and V is volume
0.750V1=275(0.5)0.75V1=137.5V1=183.34mLThe new volume will be by using the relation between molarity and volume formula.
What is molarity?Molarity, also termed as molar concentration in a solution, is a method of determining how much material is present in a chemical solution.
Calculation of volume with the aid of molarity formula is shown below:
Volume is calculated by using the molarity formula.
[tex]M_{1} V_{1} = M_{2} V_{2}[/tex]
Where, M is molarity and V is volume.
It is given that, [tex]M_{1}[/tex] = 0.750 M , [tex]M_{2}[/tex] = 0.500 M, [tex]V_{1}[/tex] = 275 ml .
Now, put the value of given data in molarity formula.
[tex]M_{1} V_{1} = M_{2} V_{2}\\V_{2} = M_{1} V_{1} / M_{2}\\V_{2} = (0.750 M) (275 ml) / 0.500 M\\V_{2} = 183.34 ml[/tex]
Therefore, the volume will be 183.34 ml.
To know more about molarity click here.
https://brainly.com/question/2817451.
#SPJ2
True or False? Mask mandates have been lifted on all college campuses. True False
Answer:
False
Explanation:
Everything in the world is made of matter except you??
TrueFalse
Answer:
False.
Explanation:
Humans are made of matter too :)
in need of some help with this question please~
when 4g of oxygen gas reacts with excess of hydrogen gas, the volume of water vapour produced at (STP) is ....... L ( H = 1 , O = 16).
a) 22.4
b) 44.8
c) 11.2
d) 5.6
an explanation would be great for future reference <3 thank you in advance!
Answer:
5.60 Liters at STP
Explanation:
First you need the balanced reaction equation
2 H2 + O2 ====> 2 H2O
4 g of oxygen ( O2 ) is 4/(15.999*2) moles of O2 (using periodic table)
Twice the number of moles of H2O re produced (from equation)
at STP the volume of a mole of gas is 22.4 liter/ mole
put all of this together
2 * 4 / (15.999*2) moles * 22.4 L/mole = 5.60 L
How would you write 16,340 in scientific notation with 2 significant figures?
Answer:
1.6 x 10^4
Explanation:
16,340
with 2 significant figures is
16000
in scientific notation
is 1.6 × 10^4
because 10^4 means
if you move the decimal point 4 spaces then
1.6 becomes 16000
https://brainly.com/question/17715063?
fossil fuel in a sentence
biomass in a snentence
Answer:
Below•
Explanation:
Fossil Fuel: It's a natural gas based on natural materials such as coal.
Biomass: It's the total weight of substance.
[tex] \qquad \qquad...[/tex]
Identify the molecular shape of each lewis structure. bent tetrahedral trigonal planar trigonal pyramidal
Identify the molecular shape of each lewis structure we have that:
1. Trigonal pyramidal
2. Tetrahedral
3. Trigonal planar
4. Bent
What is Lewis structure?For an understanding through pictures of the location of electrons in an atom, we represent electrons as dots around the element symbol. The number of electrons available for bonding is indicated by unpaired dots. These symbols are called Lewis symbols.
The Lewis structure shows the formation of bonds in a molecule, as well as the atoms involved and the valence electrons of each of them, in this case was Trigonal pyramidal; Tetrahedral; Trigonal planar; Bent.
See more about lewis structure at brainly.com/question/4144781
#SPJ4
2. Observe Examine the flame closely. Is it the wax or the wick that burns?
Answer:
Wax
Explanation:
The combustible material in a candle or its fuel is wax. Before the wax can become fuel, it first needs to get hot enough. To start that heating process, you first need to light the wick with another source of fire, such as a match. As the wick burns down the heat of the flame melts the wax around the wick.
A canister has a fixed volume. If the pressure of the cannister is 1.5 atm at 25 Celsius, what is the new pressure if the temperature rises to 75 degrees Celsius?
a) 4.5 atm
b) 1.6 atm
c) 1.3 atm
d) 1.8 atm
Answer:
d) 1.8 atm
Explanation:
According to Boyle's Law,
P₁/T₁ = P₂/T₂Here, we are given :
P₁ = 1.5 atmT₁ = 25°C = 298 KT₂ = 75°C = 348 KSolving
P₂ = P₁T₂/T₁P₂ = 1.5 x 348 / 298P₂ = 522/298P₂ = 1.8 atm (approximately)Soil is conserved from erosion to
Answer:
keep it from being washed away by water
When would a transformation of chemical energy to electrical energy occur?
A. when the current becomes zero
B. when a reaction produces the same products
C. when electrons stop moving between atoms
D. when there is chemical reaction between metals and nonmetals
I think that the answer MAY be D..............but I don't know.
Answer:
it would occur when there are two different metals involved.
What is the largest possible electronegativity difference for a bond to be covalent?
A.
0.5
B.
1.7
C.
0.0
D.
1.0
Covalent bonding is the sharing of electrons between atoms. The electronegativity difference of 1.7 is the largest for a bond to be covalent. Thus, option B is accurate.
What is the electronegativity difference?The electronegativity difference is the parameter used to determine the polarity and the type of the bond formed by the atom of the species. it gives the measure of the atom to attract the shared electrons.
For a covalent bond to form the electronegativity difference between the two atoms of the molecules must be less than 2. A difference of more than 2 results in ionic bond formation.
Therefore, option B. 1.7 is the highest electronegativity difference for a covalent bond formation.
Learn more about electronegativity and covalent bonds here:
https://brainly.com/question/19931135
#SPJ1
The fact that water is attracted to itself, a property called:.
what is the volume of 15.0 g of ice
A. 7.5
B. 13.8
C. 15.0
D. 16.3
When we convert 15 g of ice to volume in milliliters (mL), the result obtained is 15 mL (option C)
Conversion scale1 g = 1 mL
How to convert 15 g to mL1 g is equivalent to 1 mL.
Therefore,
15 g will also be equivalent to 15 mL
Thus,
15 g = 15 mL
The correct answer to the question is 15 (Option C)
Learn more about conversion:
https://brainly.com/question/2139943
#SPJ1
lead ions and magnesium ions both have a charge of 2+. predict the ionic equation for this reaction.
As both the ions have charge of +2 the compound formed is PbMg as the like charges will cancel out each other.
What are ions?An ion is defined as an atom or a molecule which has a net electrical charge. There are 2 types of ions :1) cation 2) anion . The cation is the positively charged ion and anion is the negatively charged ion . As they are oppositely charged they attract each resulting in the formation of ionic bond.
Ions consisting of single atom are mono-atomic ions while which consists of two or more ions are called as poly-atomic ions . They are created by chemical interactions . They are very reactive in their gaseous state and rapidly react with oppositely charged ions resulting in neutral molecules.Ions of opposite charges combine in ionic compounds.
Learn more about ions,here:
https://brainly.com/question/1488567
#SPJ2
Why are fat layers and thick white fur advantageous for polar bears?
Group of answer choices
A. They insulate the bears and allow them to blend in with their environment.
B. They help the bears get rid of excess body heat more readily.
C. They help bears hibernate longer.
D. They allow the bears to run and swim faster to escape predators.
Answer:
A. They insulate the bears and allow them to blend in with their environment
5. Why does temperature go down when you remove CO2?
Answer:
It is harmful gas which cause global warming
What would happen if the student did not stop the development before the solvent reached the top of the paper
Answer:
The solvent would wash away the dye.
Explanation:
The solution will m ove to the top and you would not be able to calculate the Rf value that is com pared to the distance that a com ponent traveled in the stationary phase reached by the solvent.
Answer:
The solvent would wash away the dye.
Explanation:
The solution will m ove to the top and you would not be able to calculate the Rf value that is com pared to the distance that a com ponent traveled in the stationary phase reached by the solvent.