Why do anticyclones make UHIs stronger?

Sodium nitrate & the insoluble substance silver chloride are produced when silver nitrate & sodium chloride combine.

A substance made up of more than one element is called a compound. Table salt, water, and carbon dioxide are a few examples of compounds.

The two fundamental categories of compounds are. The way the particles in the molecule bond to one another defines who we are. They are referred to as "molecular" and "salt" compounds, respectively.

White metallic element with the highest electrical and thermal conductivity of any material which is sonorous, elastic, very malleable, able to undergo an elevated level of polish, and primarily monovalent in compounds. symbol See Table of Chemical Elements for Ag.Silver's scientific name is an acronym for the Latin.

To know more about compound visit :

https://brainly.com/question/13516179

#SPJ1

The four mole ratios are: 6 KOH / 2 K₃PO₄, 2 KOH / 1 Co₃(PO₄)₂,

1 K₃PO₄ / 1 Co₃(PO₄)₂, 1 Co(OH)₂ / 2 KOH.

Mole ratio refers to the ratio between the number of moles of two substances in a chemical reaction.

The given chemical equation is:

2 KOH + Co₃(PO₄)₂ → K₃PO₄ + Co(OH)₂

And the first mole ratio given is:

6 KOH / 2 K₃PO₄

To find the other mole ratios, we need to first balance the chemical equation. It is already balanced, so we can proceed to find the other mole ratios:

(2) 2 KOH / 1 Co₃(PO₄)₂

This ratio indicates that two moles of potassium hydroxide react with one mole of cobalt(II) phosphate.

(3) 1 K₃PO₄ / 1 Co₃(PO₄)₂

This ratio indicates that one mole of potassium phosphate is produced for every mole of cobalt(II) phosphate that reacts.

(4) 1 Co(OH)₂ / 2 KOH

This ratio indicates that one mole of cobalt(II) hydroxide is produced for every two moles of potassium hydroxide that react.

Therefore, the four mole ratios are:

(1) 6 KOH / 2 K₃PO₄

(2) 2 KOH / 1 Co₃(PO₄)₂

(3) 1 K₃PO4 / 1 Co₃(PO₄)₂

(4) 1 Co(OH)₂ / 2 KOH

Learn more about moles here:

https://brainly.com/question/26416088

#SPJ1

Correct question is:

KOH + Co₃(PO₄)₂ →

With the above balanced equation, make atleast four mole ratios ( one is done for you ):

[tex]\frac{6KOH}{2K3PO4}[/tex]    -      -        -

At 25 °C only 0.0640 mol of the generic salt AB2 is soluble in 1.00 L of water. 1.049 × 10⁻³ is the Ksp value of the salt at 25 °C.

Given that 0.0640 mol of the generic salt AB2 is soluble in 1.00 L of water at 25°C, we can determine the Ksp value using the dissociation reaction you provided:

Calculating the concentrations of ions in solution and Ksp are both possible using the molar solubility.
AB2 (s) ⇌ A²⁺ (aq) + 2B⁻ (aq)
First, find the molar concentrations of the ions at equilibrium:
[A²⁺] = 0.0640 mol/L
[B⁻] = 2 × 0.0640 mol/L = 0.128 mol/L
Next, write the Ksp expression for the reaction:
[tex]Ksp=[A^{2+}][B-]^{2}[/tex]
Finally, substitute the concentrations into the Ksp expression and calculate the Ksp value:
Ksp = (0.0640) × (0.128)² = 1.049 × 10⁻³
The Ksp of the generic salt AB2 at 25°C is approximately 1.049 × 10⁻³.

Learn more about Ksp value here

https://brainly.com/question/12961072

#SPJ11

In the process of nuclear fission,1(one atom splits into two).Fission only happens to very 2( large ) atoms. The Fission process usually also produces several free 3( neutrons).

The Nuclear fission is the process in of the radioactive decay process in this process the heavy and the unstable radioactive nucleus will be decays to the lighter ones and it will release of the energy and the free neutrons.

The nuclear Fission will differs from the nuclear fusion in which in the nuclear fusion, the two lighter atoms will be comes together and will  form the larger one. The nuclear fission process will releases the very great amount of the energy.

To learn more about nuclear fission here

https://brainly.com/question/27923750

#SPJ4

The global warming potential (GWP) is a measure of how much a gas contributes to global warming over a given period of time, compared to carbon dioxide (CO2). This means that different gases have different levels of impact on the Earth's climate system, depending on their heat retention capacity, isotope ratio, natural source, atmospheric half-life, color, and odor.

The heat retention capacity of a gas refers to its ability to absorb and trap heat in the atmosphere. This is important because gases like carbon dioxide, methane, and nitrous oxide have different heat-trapping capabilities, with methane being about 28 times more potent than CO2. The isotope ratio of a gas can also affect its GWP, as some isotopes can trap more heat than others. The natural source of a gas can also affect its GWP. For example, some gases like methane are naturally emitted by wetlands, while others like fluorinated gases are created through industrial processes. The atmospheric half-life of a gas is another factor that affects its GWP, as some gases can remain in the atmosphere for decades or even centuries, contributing to long-term warming. Finally, the color and odor of a gas do not directly affect its GWP, but they can be useful in identifying different gases and their sources. Overall, understanding the different factors that contribute to the GWP of gases in the atmosphere is important for mitigating the impacts of climate change and reducing our carbon footprint.

For more information on carbon dioxide see:

https://brainly.com/question/13229518

#SPJ11

Three reasons why sodium borohydride is a better choice for the reduction of benzyl instead of lithium aluminum hydride are: It is less reactive, it doesn't reduce esters, carboxylic acids or amides, it reacts with alcohol and water at room temperature.

When compared to aluminium hydride, the anion of Sodium borohydride is substantially less reactive. With protic solvents like water, it reacts very slowly. It can be utilised in an ethanol-based solvent or a basic aqueous solution.

Sodium borohydride works well as a reducer. It typically won't decrease esters, carboxylic acids, or amides by itself (although it will reduce acyl chlorides to alcohols). Sodium borohydride is more chemoselective in action because it is less reactive than lithium aluminium hydride. At room temperature, it only reacts slowly with most alcohols and water, and it reduces with this reagent.

To know more about sodium borohydride here

https://brainly.com/question/29653533

#SPJ4

The correct answer is: "a. decreases with increasing temperature." The solubility of solids in water generally decreases with increasing temperature, meaning that less of the solid will dissolve in the water as the temperature increases.

Amount of a substance (referred to as the solute) that, at a certain temperature and pressure, dissolves in a unit volume of a liquid substance (referred to as the solvent) to form a saturated solution. The common unit of solubility is moles of solute per 100 grammes of solvent.

Comparing the degree to which various solutes can dissolve in a given solvent at a specific temperature is known as solubility.

In the presence of undissolved solute particles, a saturated solution of a solute at a specific temperature is one that includes all of the solute that can dissolve at that temperature.

However, there are some exceptions to this rule, where the solubility of certain solids may increase with increasing temperature.

Learn more about solubility here

https://brainly.com/question/31493083

#SPJ11

The maximum value within a 1 standard deviation range of the average would be 3.61 ml. This is found by adding the standard deviation to the average (2.8 ml + 0.81 ml = 3.61 ml).

To find the maximum value within a 1 standard deviation (SD) range of the average, you need to add the standard deviation to the average value. In this case, the average is 2.8 ml and the standard deviation is 0.81 ml. Here's the step-by-step explanation:
1. Determine the average value: 2.8 ml
2. Determine the standard deviation: 0.81 ml
3. Add the standard deviation to the average value: 2.8 ml + 0.81 ml
Your answer: The maximum value within a 1 SD range of the average is 3.61 ml.

To learn more about standard deviation click here https://brainly.com/question/23907081

#SPJ11

Cation A, with a +3 charge and smaller size, is more likely to occupy negatively charged sites on a clay mineral given equal concentrations in solution.

This is because the higher positive charge allows for stronger electrostatic attraction to the negatively charged sites, overcoming the size difference between the two cations.

Cation A is more likely to occupy negatively charged sites on a clay mineral given equal concentrations in solution. This is because its higher charge makes it more attracted to the negatively charged sites on the mineral, and its smaller size allows it to fit more easily into the interlayer spaces of the mineral.

Cation B, on the other hand, may be too large to fit into these spaces, and its lower charge may make it less attracted to the negatively charged sites.

To know more about concentrations click here

brainly.com/question/29072206

#SPJ11

Given equal concentrations in solution, cation A with a +3 charge and smaller size is more likely to occupy negatively charged sites on a clay mineral compared to cation B with a +1 charge and larger size, which makes it less likely to occupy those sites due to weaker attraction and less compatibility with the available spaces on the clay mineral.

Cation A is more likely to occupy negatively charged sites on a clay mineral given equal concentrations in solution. This is because cations with higher charges have stronger electrostatic attraction to negatively charged sites on the clay mineral. Additionally, the smaller size of cation A allows for a tighter fit into the negatively charged sites, increasing the likelihood of occupation.

However, other factors such as competition with other cations in solution and the specific characteristics of the clay mineral may also play a role in determining which cation occupies the negatively charged sites.

To know more about concentrations in solutions:
https://brainly.com/question/28313496
#SPJ11

The given statement "For the compound NaBr there is no need to criss cross the charges because they cancel each other out and equal zero" is false. Because,  the charges of the individual ions in an ionic compound do not cancel each other out to equal zero.

Instead, ionic compounds are formed by the transfer of electrons from the metal cation (in this case, Na+) to the nonmetal anion (in this case, Br-), resulting in positively charged and negatively charged ions.

When writing the formula for an ionic compound like NaBr, we need to ensure that the overall compound has a neutral charge. To do this, we use the criss-cross method to balance the charges of the individual ions, so that the total charge of the compound is zero.

In the case of NaBr, the criss-cross method tells us that one Na+ ion is needed for every Br- ion, resulting in the formula NaBr.

To know more about criss-cross method there

https://brainly.com/question/15092483

#SPJ4

Sometimes two or three pairs of electrons may be shared to give double or triple covalent bonds.

A double covalent bond occurs when two pairs of electrons are shared between two atoms, while a triple covalent bond is formed when three pairs of electrons are shared. These bonds are stronger than single covalent bonds and result in shorter bond lengths. In some cases, a coordinate covalent bond can form when one atom donates both electrons for a shared pair, often occurring between a Lewis base and a Lewis acid. This type of bond is still considered a covalent bond, as the electrons are shared between the atoms.

Bond dissociation energy refers to the energy required to break a covalent bond, with double and triple covalent bonds generally having higher bond dissociation energies than single bonds, this is because more energy is needed to break the stronger, shorter bonds. Resonance structures are used to represent molecules where the electron distribution cannot be accurately depicted by a single Lewis structure. In such cases, multiple structures are used to show the various possible arrangements of electrons, indicating that the actual electron distribution is an average of these structures. Sometimes two or three pairs of electrons may be shared to give double or triple covalent bonds.

learn more about double covalent bond here:

https://brainly.com/question/29266368

#SPJ11

As per the USEPA standard, the secondary treatment effluent should have a pH in range of 6-9. Hence option A.

Wastewater that has already undergone primary treatment is treated using a secondary procedure. Prior to being released into the environment, wastewater undergoes secondary treatment in an effort to eliminate as many pollutants as feasible.

The pH values of the water that can be discharged from wastewater treatment facilities must meet requirements established by the USEPA. The pH of secondary treatment effluent should be between 6.0 and 9.0, according to the USEPA, to guarantee that the water is safe to dump and won't affect the environment.

To know more about secondary treatment effluent, visit,

https://brainly.in/question/7651878

#SPJ4

If the n-butylacetate synthesized from acetic acid and 1-butanol is absolutely pure, the functional group peak of the hydroxyl group (-OH) should not show up in the IR spectrum of the product.

This is because during the synthesis process, the hydroxyl group of the 1-butanol reacts with the carboxylic acid group of acetic acid to form an ester linkage, resulting in the formation of n-butylacetate.

The ester linkage is a carbonyl group (-C=O) that replaces the hydroxyl group in the product, resulting in a decrease or complete absence of the hydroxyl group peak in the IR spectrum of the product. Therefore, the absence of the hydroxyl group peak in the IR spectrum of the synthesized n-butylacetate would be an indication of its purity.

However, it is important to note that other functional groups such as the carbonyl group (-C=O) and the C-H stretching vibrations may be present in the IR spectrum of the synthesized n-butylacetate. Therefore, it is crucial to interpret the IR spectrum carefully to identify all the functional groups present in the synthesized product.

For more such questions on acetic acid, click on:

https://brainly.com/question/24304533

#SPJ11

Aldol reactions have the drawback that their products mix. To minimize the mixture of products, measures like careful reactant selection, certain catalysts, or solvents can be used.

Several tactics can be used to minimize the mixture of products in a mixed aldol reaction. First, it is possible to influence the reaction pathway and reduce the production of undesirable products by carefully choosing the reactants and modifying their concentrations.

Second, the desired product can be formed more readily and other products can form less readily when a certain catalyst or solvent is used.

Third, adjusting reaction parameters like temperature and time can aid to increase selectivity and reduce the production of undesirable byproducts. Finally, selectivity can be increased by using sophisticated techniques like asymmetric synthesis or enzymatic catalysis.

To know more about aldol reactions, visit,

https://brainly.com/question/27178362

#SPJ4

The possible most appropriate answer is altering substrate primary structure. Enzymes do not alter the primary structure of substrates, but instead they interact with substrates to co-localize them, alter their shape, and/or alter the local pH to increase or decrease the rate of chemical reactions.

Hence, the correct answer is (d). altering substrate primary structure.

To know more about enzyme inhibition, click here:-

https://brainly.com/question/17320375

#SPJ11

Starting with 32.0 g of a radioactive substance, 2.0 g remains after four half-lives.

Each half-life of a radioactive substance results in half of the original material remaining. After the first half-life, you would have 1/2 of the original amount remaining, after the second half-life you would have 1/4 remaining, after the third half-life you would have 1/8 remaining, and after the fourth half-life, you would have 1/16 of the original amount remaining.

Therefore, if you have 2.0 g remaining after four half-lives, you can calculate the original amount using the following equation:

2.0 g = (1/16) x original amount

Solving for the original amount, we get:

original amount = 2.0 g x 16 = 32.0 g

To know more about the radioactive substance refer here :

https://brainly.com/question/31765647#

#SPJ11

The quantity of moles of a solute that are dissolved in a volume is known as molarity, often referred to as molar concentration. 19.64 grams of potassium hydroxide must be added before the container is filled to its final volume

To calculate the number of grams of potassium hydroxide needed to make a 0.8750 m solution with a final volume of 400.0 ml, we first need to determine the number of moles of potassium hydroxide required.
Molarity (M) is defined as moles of solute per liter of solution. Since we know the final volume is 400.0 ml (or 0.4000 L), we can calculate the number of moles of potassium hydroxide needed as follows:
0.8750 mol/L x 0.4000 L = 0.3500 moles of potassium hydroxide
Next, we need to convert moles of potassium hydroxide to grams. The molar mass of potassium hydroxide (KOH) is:
K (39.10 g/mol) + O (16.00 g/mol) + H (1.01 g/mol) = 56.11 g/mol
Therefore, the number of grams of potassium hydroxide needed can be calculated as follows:
0.3500 moles x 56.11 g/mol = 19.64 grams of potassium hydroxide
So, the researcher needs to add 19.64 grams of potassium hydroxide to the container before it is filled to its final volume of 400.0 ml to make a 0.8750 m solution.

Learn more about Molarity here

https://brainly.com/question/2175037

#SPJ11

Radon concentrations tend to be highest in winter in most areas.

Radon is a naturally occurring radioactive gas that is produced by the decay of uranium and other radioactive elements in the soil and rocks beneath the earth's surface. Radon can enter buildings through cracks and other openings in the foundation, and when it accumulates indoors, it can pose a health risk to occupants. Radon exposure is the second leading cause of lung cancer after smoking and is responsible for an estimated 20,000 lung cancer deaths in the United States each year.

Radon concentrations can vary depending on a variety of factors, including the type of soil, the geology of the area, and the local climate. In most areas, radon concentrations tend to be highest in winter when buildings are closed up and have less ventilation, which can cause radon gas to become trapped and accumulate to higher concentrations indoors. Additionally, in colder climates, the soil around buildings may be frozen, which can prevent radon gas from escaping through the soil and instead cause it to seep into buildings through cracks and other openings. Radon levels can also be affected by building construction, ventilation systems, and other factors, and testing is the only way to determine if radon is present at levels that could pose a health risk.

Visit to know more about Concentration:-

brainly.com/question/26255204

#SPJ11

The pressure exerted by each gas within a mixture of gases and is measured in mm Hg is known as partial pressure. To find the partial pressure of a specific gas in a mixture, you can use Dalton's Law of Partial Pressures. Here's a step-by-step explanation:

1. Identify the mole fraction of the specific gas in the mixture.
2. Measure the total pressure of the gas mixture in mm Hg.
3. Multiply the mole fraction of the specific gas by the total pressure of the mixture.

The result will give you the partial pressure of the specific gas in mm Hg.

To know more about Dalton's Law of Partial Pressure:

https://brainly.com/question/14119417

#SPJ11

The pressure exerted by each gas within a mixture of gases and is measured in mm Hg is known as partial pressure. To find the partial pressure of a specific gas in a mixture, you can use Dalton's Law of Partial Pressures. Here's a step-by-step explanation:

1. Identify the mole fraction of the specific gas in the mixture.

2. Measure the total pressure of the gas mixture in mm Hg.

3. Multiply the mole fraction of the specific gas by the total pressure of the mixture.

The result will give you the partial pressure of the specific gas in mm Hg.

To know more about Dalton's Law of Partial Pressure:

brainly.com/question/14119417

#SPJ4

Before doing any work on any piece of electrical equipment, the operator should perform the following procedure: a) Read the O&M manual and b) Lock out and tag the equipment. This ensures safety and proper understanding of the equipment's operation.

The correct answer is b) Lock out and tag the equipment. This is a critical safety procedure that must be followed before any work is done on electrical equipment. It involves physically disconnecting the equipment from its power source, locking it out so that it cannot be turned on accidentally, and tagging it with a warning label to alert others that work is being done on the equipment. While it's always a good idea to read the O&M manual and contact the manufacturer for guidance, these steps should only be taken after the safety procedures have been completed.

To know more about electrical equipment please click:-

https://brainly.com/question/30140758

#SPJ11

The substance that is the first product of the decomposition of organic matter, its presence in water usually indicates "fresh pollution" of sanitary significance is a. ammonia

Ammonia is produced when organic matter, such as plant and animal waste, breaks down. It is a common component in wastewater and can lead to pollution if not properly managed. The presence of ammonia in water is a concern because it can cause health issues and harm aquatic life.

In high concentrations, ammonia can be toxic to both humans and animals. It also serves as a source of nutrients for algae, which can lead to eutrophication and oxygen depletion in water bodies. Thus, monitoring ammonia levels is important to ensure the health and safety of both people and the environment. The substance that is the first product of the decomposition of organic matter, its presence in water usually indicates "fresh pollution" of sanitary significance is a. ammonia

learn more about eutrophication here:

https://brainly.com/question/15523561

#SPJ11

The technique to calculate how many grams of element are produced using limiting reactant is shown.

The term "limiting reactant" refers to the reactant that is entirely consumed in a chemical reaction and restricts the quantity of product that can be produced.

1. Determine the limiting reactant by comparing the amount of each reactant to the stoichiometric ratio given in the balanced equation.

2. Use the stoichiometric ratio to calculate the number of moles of the element produced from the limiting reactant.

3. Convert the moles of the element to grams using its molar mass.

The formula is:

Grams of element produced = Moles of element produced x Molar mass of element

where Moles of element produced is calculated using the stoichiometric ratio from the balanced equation, and Molar mass of element is the atomic mass of the element in grams per mole.

To know more about limiting reactant, click here

https://brainly.com/question/2948214

#SPJ1

If the complete photoelectron spectra (pes) for an element shows three peaks of identical size, this indicates that the element has three valence electrons with similar energy levels.

This information can be useful in determining the element's chemical properties and potential reactions with other elements. The complete photoelectron spectra (PES) for an element showing three peaks of identical size indicates that the element has three electron subshells with the same number of electrons in each subshell. This suggests that the element has a balanced electron distribution within its energy levels.

To learn more about valence electrons click here

brainly.com/question/28977387

#SPJ11

When the concentration of the acidic form of a compound ([HA]) increases, the pH of the solution decreases, and the percent ionization of the compound also decreases.

The pH is a measure of the acidity or alkalinity of a solution and is defined as the negative logarithm (base 10) of the hydrogen ion concentration ([H+]). As [HA] increases, the concentration of hydrogen ions in the solution also increases, resulting in a decrease in pH.

The percent ionization of a compound is the proportion of the compound that exists in the ionized form compared to the total concentration of the compound. When [HA] increases, more of the compound exists in the non-ionized form, leading to a decrease in the percent ionization.

Therefore, as the concentration of the acidic form ([HA]) increases, the pH decreases due to the increased concentration of hydrogen ions, and the percent ionization decreases because more of the compound remains in the non-ionized form.

For more details regarding percent ionization, visit:

https://brainly.com/question/161965?referrer=searchResults

#SPJ12

The pressure of an aluminum scuba tank contains compressed air at 2750 psi expressed in inches of mercury is 5587 inches of mercury.

To convert the pressure in psi to inches of mercury, we need to use the conversion factor. 1 psi is equivalent to 2.036 inches of mercury. So, to convert 2750 psi to inches of mercury, we multiply 2750 by 2.036.

2750 psi x (2.036 inches of mercury / 1 psi) = 5587 inches of mercury

This means that the pressure in the aluminum scuba tank is equivalent to 5587 inches of mercury.

It's important to note that both psi and inches of mercury are units of pressure measurement. While psi is commonly used in industrial applications, inches of mercury are often used in meteorology and aviation. Understanding how to convert between different units of measurement is important for scientists, engineers, and technicians in various fields.

Learn more about conversion factor here: https://brainly.com/question/30850837

#SPJ11

The chemical bond described in the question is a single covalent bond. In a single covalent bond, two atoms share a pair of electrons to form a stable molecule.

This type of bond is typically formed between two nonmetal atoms that have similar electronegativities. The structural formula for a single covalent bond is represented by a straight line between the two atoms, with one electron represented as a dot on each side of the line. The bond dissociation energy is the amount of energy required to break a bond between two atoms.

A coordinate covalent bond is a type of covalent bond where both electrons in the shared pair come from the same atom, known as a donor atom. A polyatomic ion is a charged molecule composed of two or more atoms held together by covalent bonds.

Learn more about electronegativities.

https://brainly.com/question/17762711

#SPJ4

When 25.0 grammes of Methane are consumed, 2.3385 moles of water are created.

The ratio between the atomic mass unit and gramme mass unit sizes affects the number in a mole, or Avogadro's number. One mole of hydrogen atoms weighs around one gramme, compared to the mass of one hydrogen atom, which is roughly one unit.

2 CH3CH3(g) + 5 O₂(g) → 4 CO₂(g) + 6 H₂O(g)

The molar mass of Methane is 16.04 g/mol, so 25.0 grams of CH₄ is equal to:

25.0 g / 16.04 g/mol = 1.559 mol CH₄

From the balanced equation, the molar ratio of CH₄ to Water is 2:3. Therefore, for every 2 moles of Methane consumed, 3 moles of Water are produced.

So, for 1.559 mol of CH₄ consumed, the amount of Water produced would be:

3/2 x 1.559 mol = 2.3385 mol

To know more about Methane visit:-

https://brainly.com/question/28933327

#SPJ1

Adding more of product C will  affect the equilibrium of the system  by  Shift it to the left toward the reactants which is option B.

By adding more of product C affect the equilibrium of the system to the equation below;

A+B= C+D

This will make the equilibrium to shift to the left which is the reactant side A+B thereby which will counteract to  increase to the product side C.

This is base on Le Chatelier principle that states that a system at  equilibrum will respond to any change in condition or stress by shifting in the direction that  conteract the change.

Therefore, the correct answer is Shift it to the left toward the reactants.

Learn more about equilibrium shift below.

https://brainly.com/question/27404032

#SPJ1

The balanced equation is:

Al4C3 + 12 H2O -> 4 Al(OH)3 + CH4

The coefficient of H2O is 12.

To balance this equation, we need to make sure that the number of atoms of each element is equal on both sides.

Let's start with the carbon atoms. There are four carbon atoms on the left side (in Al4C3) and one on the right side (in CH4). To balance them, we need to multiply the coefficient of CH4 by 4, which gives us:

Al4C3 + 12 H2O -> 4 Al(OH)3 + CH4

Now let's look at the hydrogen atoms. There are 24 hydrogen atoms on the right side (4 in Al(OH)3 and 4 in CH4) and 24 hydrogen atoms on the left side (in 12 H2O). They are already balanced.

Finally, let's check the aluminum atoms. There are four on the left side and four on the right side, so they are also balanced.

For such more questions on  H2O:

https://brainly.com/question/9005128

#SPJ11

The measure of the amount of water held by a rock or soil in pores or voids, expressed as % of the total volume, is referred to as: c. porosity.

Porosity is a measure of the amount of water held by a rock or soil in pores or voids, expressed as a percentage of the total volume. It is a measure of the amount of space, or "void spaces," within the rock or soil particles. Porosity can range from 0% (no voids) to 100% (all voids). Porosity is important because it affects the water retention, permeability, and other physical properties of the rock or soil. Porosity is also an important factor in determining the flow of water through the subsurface.

To learn more about volume click here https://brainly.com/question/25252629

#SPJ11