The gases changes its volume because there are no force holding the gas molecules together. Hence the option C is correct.
Gases do not have a definite shape or volume because the molecules in the gases are very loosely packed, they have large intermolecular spaces , hence they move around. The force of attraction between the molecules is also very less, as a result gases acquire any shape or any volume. In comparison to liquids and solids, intermolecular interactions between gas particle are weaker. Because the atoms in gases are loosely connected to one another, they can move more quickly than those in liquids. Thus, gases lack both a defined shape and a defined volume. They merely assume a container-like shape.
So, gas molecules can break loose easily from any boundary and can fill any space. Hence, they do not contain any definite volume.
To know more about properties of gases, please refer:
https://brainly.com/question/6140407
#SPJ4
To estimate the molar mass of the unknown gas based on the molar mass of argon, which assumptions should be made?.
The molar mass of the unknown gas is 100.4 g/mol
What is Molar mass?
Molar mass of argon = 39.95 g/mol
After filling with argon the flask gained 3.221 grams
After filling with an unknown gas, the flask gained 8.107 grams
The gas with the higher molar mass will have the higher density.
Ar - 3.224 g; molar mass = 39.95 g/mol
X = 8.102 g; molar mass = ??
Molar mass of the unknown gas = 8.102g X *(39.95 g/mol / 3.224 g)
= 100.4 g/mol
The molar mass of the unknown gas is 100.4 g/mol
We all wish to know how many molecules are present in a given substance. Atoms and molecules are incredibly small in both size and mass. One sample mole's weight is the molar mass. To determine the molar mass, connect the atomic masses (atomic weights) of each atom in the molecule. Using the mass listed in the Periodic Table or Atomic Weight Table, determine the atomic mass for each element.
Learn more about Molar Mass from given link
https://brainly.com/question/837939
#SPJ4
Four metal cubes, each at a different starting temperature, are placed in contact with each other. Which of the following describes the most likely flow of thermal energy in this situation? A Cube #4 to Cube #2 B Cube #1 to Cube #2 C Cube #3 to Cube #4 D Cube #1 to Cube #3
The answer should go like...
Cube #1 to Cube #3
Cube #2 to Cube #1
Cube #2 to Cube #4
Cube #4 to Cube #3.
What are the values of δs for the water, the surroundings, and the universe for the evaporation of water from an open pan at 25°c?.
The Entropy(ΔS) (water) is positive, and ΔS (surrounding) is negative, Water does evaporate, so the process is spontaneous, which means ΔS (universe) > 0 according to the Second Law of Thermodynamics.
What is Entropy (ΔS)?
The measure of a system's disorder is called entropy. It is a thermodynamic system's extensive attribute, which means that the amount of matter in the system affects how much it is worth. Entropy is typically represented in equations by the letter S and has units of joules per kelvin (J/K1) or (kg/m2/s2K1). Low entropy describes a highly ordered system.
What is the Second law of thermodynamics?
The entropy will either rise or stay the same in every cyclic process, according to the Second Law of Thermodynamics. Entropy, sometimes known as the "direction of time's arrow," provides information on how an isolated system evolves through time. If two separate pictures of the same system show one state that is more disordered than the other, it may be assumed that this state emerged later in time. In the case of an isolated system, the flow of events leads to a state where the system is more disordered or has the higher entropy.
Hence, ΔS (water) is positive, and ΔS (surrounding) is negative, Water does evaporate, so the process is spontaneous, which means ΔS (universe) > 0 according to the Second Law of Thermodynamics.
To know more about Entropy, check out:
https://brainly.com/question/6364271
#SPJ4
12) a. Calculate the mass defect in Fe-56 if the mass of
an Fe-56 nucleus is 55.921 amu. The mass of a
proton is 1.00728 amu and the mass of a neutron
is 1.008665 amu.
Show work
b. Determine the binding energy of an O-16
nucleus. The O-16 nucleus has a mass of 15.9905
amu. A proton has a mass of 1.00728 amu, a neutron has a mass of 1.008665 amu, and 1 amu is equivalent to 931 MeV of energy.
Show work
c. What percentage of a radioactive substance
remains after 7.00 half-lives have elapsed?
Show work
d. Carbon-11 is used in medical imaging. The half-
life of this radioisotope is 20.4 min. What
percentage of a sample remains after 60.0 min?
show work
The mass defect in fe-56 is 0.528.
Binding energy - quantity of energy required to split a particle from a machine of debris or to disperse all of the debris of the system. Binding power is particularly applicable to subatomic debris in atomic nuclei, to electrons bound to nuclei in atoms, and to atoms and ions certain collectively in crystals.
Binding energy is the minimal quantity of electricity required to free an item from a sure machine and escape from its place of have an impact on (i.e. break out to infinity). inside the given case, it's miles the energy required through the satellite to depart its orbit around the earth and break out to infinity.
Learn more about Binding energy here:-
brainly.com/question/23020604
#SPJ4
Vinegar has a concentration of 0.87mol/L acetic acid to make a 100ml solution it is diluted by a factor of 10 how do u find the original volume of vinegar and the concentration of acetic acid in the diluted solution
To find the original volume of vinegar, we can use the following formula:
Original volume of vinegar = Diluted volume * Dilution factor
In this case, the diluted volume is 100 ml and the dilution factor is 10, so the original volume of vinegar is:
Original volume of vinegar = 100 ml * 10 = 1000 ml
To find the concentration of acetic acid in the diluted solution, we can use the following formula:
Diluted concentration of acetic acid = Original concentration of acetic acid / Dilution factor
In this case, the original concentration of acetic acid is 0.87 mol/L and the dilution factor is 10, so the diluted concentration of acetic acid is:
Diluted concentration of acetic acid = 0.87 mol/L / 10 = 0.087 mol/L
This means that the diluted solution has a concentration of 0.087 mol/L acetic acid.
Please give me brainliest for more high quality answers! - longstretch
how much excess reactant is left over when 17.0g of potassium hydroxide (KOH) reacts with 20.0g of iron(II) nitrate
Iron(II) nitrate is an excess reactant left over is equal to 0.1265 mol.
What is the limiting reagent?A limiting reagent can be defined as a reactant that is completely finished from the reaction mixture at the completion of a reaction and is also referred to as a limiting reactant.
Given, a balanced chemical equation of the reaction between iron(II) nitrate and potassium hydroxide is:
[tex]Fe(NO_3)_2 +2KOH\longrightarrow Fe(OH)_2 +2KNO_3[/tex]
Given, the amount of the iron(II) nitrate = 20.0 g
The molecular mass of the iron nitrate = 71.84 g/mol
The number of moles of iron(II) nitrate = 20.0/71.84 = 0.278 mol
Given the mass of the potassium hydroxide, = 17.0 g
The number of moles of potassium hydroxide = 17/56.11 = 0.303 mol
If 2 mole of KOH react with iron(II) nitrate = 1
0.303 mol of KOH react with iron(II) nitrate = 0.303/2 = 0.1515 mol
Therefore, iron(II) nitrate is an excess reagent.
The iron(II) nitrate is left after reaction = 0.278 - 0.1515 = 0.1265 mol
Learn more about limiting reagents, here:
brainly.com/question/26905271
#SPJ1
In double replacement reactions, why will two metals not combine with each other when products are formed?.
When pieces of two ionic compounds are exchanged, creating two new compounds, this reaction is known as a double replacement reaction (also known as a double displacement, exchange, or metathesis reaction).
What is Double Displacement Reaction?
When one reactant is partially replaced by another, the reaction is referred to as a twofold displacement reaction.
Double displacement reactions can be described as follows:
AD = CB + CD + AB
In a double replacement process, the ions in two reactant ionic compounds are exchanged for the same ions in two new product compounds.
When two reactants swap cations or anions to produce two new products, the process is known as a double replacement reaction.
Double displacement reactions and metathesis reactions are other names for double replacement processes.
Double replacement reactions include neutralisation, precipitation, and gas production.
Learn more about Double Displacement Reaction from given link
https://brainly.com/question/23918356
#SPJ4
the atomic mass and abundance of Si-28 is 27.977 amu and 92.2%. The atomic mass and abundance of Si-29 is 28.976 amu and 4.7%. The atomic mass and abundance of Si-30 is 29.974 amu and 3.1%. which is the average atomic mass of silicon?
The average atomic mass of silicon has a natural abundance of Si-28 of 92.23% and Si-30 of 3.1%.
If the mass number of an atom of silicon, Si, is 28, how many neutrons does that atom contain?Because the amount of protons and electrons in a neutral substance is equal, silicon also contains 14 electrons. 28 - 14 protons equals 14 neutrons since the mass number is equal to the sum of the protons and neutrons.
With abundance and amu, how do you determine atomic mass?Unknown. By dividing by 100, convert each percentage of abundance to a decimal. This value should be multiplied by the isotope's atomic mass. Get the average atomic mass for each isotope by adding everything up.
To know more about mass number visit:-
https://brainly.com/question/4408975
#SPJ1
when 0.485 g of compound x is burned completely in a bomb calorimeter containing 3000 g of water, a temperature rise of 0.285°c is observed. what is δu of the reaction for the combustion of compound x? the hardware component of the calorimeter has a heat capacity of 3.81 kj/°c. the specific heat of water is 4.184 j/g·°c. the molar mass of compound x is 56.0 g/mol.
For 56 g/mol of the compound, change in the internal energy is calculated to be -539 kJ/mol.
What is calorimeter?Calorimeter is a device that is used to calculate the amount of heat involved in a chemical or physical process.
As, ΔU = Heat of calorimeter + Heat of solution
And we know, Heat = heat capacity * temperature
Given, 0.485 g compound
Then, ΔU = 3.81 0.285 + 4.184 3000 0.285
so, ΔU = 4.67 kJ
For 56 g/mol,
ΔU = (energy/ mass) * (moles/1)
ΔU = (4.67/0.485) *56
ΔU = 539 kJ/mol
As there is a rise in temperature in the reaction, therefore the negative sign is given to the internal energy, i.e. -539kJ/mol.
To know more about calorimeter, refer
https://brainly.com/question/2963957
#SPJ4
at constant temperature and pressure, 5.0 l of so2 is combined with 3.0 l of o2 according to the equation: 2 so2(g) o2(g) --> 2 so3(g) after the so3 formation is complete, what is the volume of the mixture?.
The volume of the mixture is 5 L
What is limiting reagent ?The limiting reagent is the one that is completely consumed during a reaction. Reagents that are entirely consumed by a chemical reaction are known as limiting reagents. They are additionally known as limiting reactants or limiting agents.
Reactants in a chemical reaction are referred to as surplus reagents if they are still present at the end of the reaction. Because its quantity restricts the number of products that can be generated, the reagent that is totally consumed or reacted is known as the limiting reagent.
We should first use the mole ratio, and SO 2 as the limiting reagent .
That would yield 5.0 L or 2 moles of SO3, but that is not one of your options. Since the temperature and pressure are both constant, the volume is equal to the number of moles since n/v = p/rt.
TO know more about mole concept you may visit the link:
https://brainly.com/question/22540912
#SPJ4
if 3.8 g of cu3(po4)2(s) was recovered from step 1, what was the approximate [cu2 ] in the original solution? (the molar mass of cu3(po4)2 is 381 g/mol.)
If 3.8 g of Cu₃(PO₄)₂(s) was recovered from step 1, the approximate [Cu²⁺ ] in the original solution is 0.3 M
The approximate [Cu²⁺ ] in the original solution can be calculate as follows
first we should calculate the moles of Cu₃(PO₄)₂ by dividing the mass with its molar mass
Moles of Cu₃(PO₄)₂ = mass/ mass molar
Moles Cu₃(PO₄)₂ = 3.8 g / 381 g/mol = 0.1 moles
we know the balance reaction of this reaction is
3Cu²⁺ + 2Na₃PO₄ ⇒ Cu₃(PO₄)₂ + 6 Na⁺
with unitary method we can conclude 3 Cu²⁺ produce 1 Cu₃(PO₄)₂ so we can calculate the 3Cu²⁺
mol Cu²⁺ = 3/1 x mol Cu₃(PO₄)₂
mol Cu²⁺ = 3x 0.1 = 0.3 M
Your question is incomplete but most probably the full question attached below
To learn more about Molar Mass refer to:
brainly.com/question/21334167
#SPJ4
Granite has a specific heat of 800 J/g x °C. What mass of granite is needed to store 150,000 J of heat
if the temperature of the granite is to be increased by 15.5 °C?
O 12.1 g
O 745.3 J
O 12.1 Celsius degress
O 745.3 g
Plugging in the given values gives m = 745.3 g.
What is specific heat?Specific heat is the quantity of heat required to raise the temperature of a unit mass of a substance by one degree Celsius. It is measured in units of energy per unit mass per degree Celsius (J/ kg-K). The specific heat of a substance is determined by its physical and chemical properties. Typically, substances with higher specific heats require more energy to heat them up, meaning they are more resistant to changes in temperature. For example, water has a higher specific heat than most other substances, and therefore it takes a lot of energy to raise its temperature.
To find the mass of granite needed to store 150,000 J of heat, we need to use the formula for specific heat: q = m * c * ΔT. Rearranging this formula to solve for m gives m = q / (c * ΔT). Plugging in the given values gives m = 150,000 J / (800 J/g x °C * 15.5 °C) = 745.3 g.
To learn more about specific heat
https://brainly.com/question/28490764
#SPJ1
a ph of 7.20 is slightly alkaline, yet a blood ph of 7.20 is called acidosis. why do you think it is called this?
As the normal pH of blood is around 7.35, a lower pH of 7.20 is considered to be an indicator of acidosis.
For the normal metabolic function of the human body, the pH of the blood in the arteries is maintained between 7.35 and 7.45 through a complex feedback system between the various systems.
Acidosis occurs when an excess of Carbonic acid formed due to the reaction of carbon dioxide with water, is present in the body. The two main organs responsible for maintaining the pH are the kidneys and lungs. Even though a pH of 7.2 is normally considered alkaline, it is acidic relative to the normal pH of the blood.
To learn more about pH :
https://brainly.com/question/12609985
After the equation below has been balanced for a reaction in an acidic solution, what will the coefficients of the reactants and products be, in order?
H2O2 + FeSO4 + H2SO4 →Fe2(SO4)3 + H2O
a. 1,2,1,1,2
b. 2,2,2,2,2
c. 2,1,2,2,1
d. 1,2,1,1,1
Answer:
c
Explanation:
english please im just guessing
If you dissolve 10. 0 g of compound x in 100. 0 ml of distilled water, the liquid turns red. The temperature of the liquid stays at 24 °c for 10 minutes. Why would you not want to sell a cold pack made with compound x?.
so the company hire company B because it pays not more than 85 cents.
Why would you not want to sell a cold pack made with compound x?
1. Technically it depends upon the temperature of your hand: if we assume the body temperature is 37 C then your hand is warmer than the beaker and the beaker will feel cold.
2. This is an endothermic reaction.
3. If the beaker changes from 25 C to 5 C the energy is lower.
1.5g x (20/5) = 6.0 grams.
Cost of 6.0 g is
$184.04 x (6.0/1000) = about $1.10 each.
its cost = 110 cents
Compound B the same way.
1.0g x (20/2.5) = 8.0 grams.
Cost of 8.0 g is
$97.13 x (8.0/1000) = about $0.777 each.
its cost 77.7 cents.
so the company hire company B because it pays not more than 85 cents.
To know more about endothermic reaction, check out:
https://brainly.com/question/1447631
#SPJ4
An atom Y ha atomic number 13. It loe 3 electron in order to be table. What i the proton number and electron number of the atom
(a)before it loe electron
(b) after loing electron
(ii) name the of ion formed by the atom when it loe three electron. Show by illutration
In the following question the number of protons and electrons before it
a)lose electron are proton number= 13 electron =13
b) after losing electrons proton number=10 electron =10
c)the type of ion it becomes is a cation as it has a positive charge on it
What is atomic number?
The number assigned to a chemical element according to its atomic number in the periodic system, which places the elements in ascending order of the number of protons in their nuclei.
In the first scenario before loses electrons the number of protons and electrons in the atom before loses electron is 13, as given atomic number is 13.In second scenario After it loses 3 electrons Number of elctrons in the atom is 10 and number of protons is 13, as protons are present in the nucleus.
Therefore the number of protons is same i.e. 13 within the atom and no. of electrons after losing 3 electrons is 10 and it becomes a cation.
To know more about atomic number from the given link
https://brainly.com/question/11353462
#SPJ4
How many grams of PbSO4 would
be produced from the complete
reaction of 23.6 g PbO2?
Pb+ PbO2 + 2H2SO4
PbO2: 239.2 g/mol
PbSO4: 303.27 g/mol
→
2PbSO4 + 2H2O
{? ] g PbSO4
One mole or 239.2 g of PbO₂ or 239.2 g gives two moles or 606.5 of lead sulphate. Thus, 23.6 g of lead oxide will give 59.84 g of lead sulphate.
What is lead oxide?Lead oxide is an ionic compound formed by the ionic bonding between the transition metal lead and oxygen by losing two electrons from lead to oxygen. It reacts with sulphuric acid giving lead sulphate PbSO₄.
As per the given balanced reaction, one mole of lead oxide gives two moles of lead sulphate.
Molar mass of PbO₂ = 239.2 g/mol
Molar mass of PbSO₄ = 303.27 g/mol
2 moles of PbSO₄ = 2 × 303.27 = 606.54 g.
Thus, 239.2 g of lead oxide gives 606.54 g of PbSO₄. The mass of PbSO₄ produced from 23.6 g of lead oxide is:
= (23.6 × 606 .54 )/ 239.2 g
= 59.84 g.
Therefore, the mass of PbSO₄ produced from 23.6 g of PbO2 is 59.84 g.
To find more on lead oxide, refer here:
https://brainly.com/question/13264277
#SPJ1
Which reaction will most likely take place based on the activity series?
Li > K > Ba > Ca > Na > Mn > Zn > Cr > Fe > Cd > Ni > H > Sb > Cu > Ag > Pd > Hg > Pt
Pt + FeCl3 Right arrow.
Mn + CaO Right arrow.
Li + ZnCO3 Right arrow.
Cu + 2KNO3 Right arrow.
According to the reactivity series, Lithium is more reactive than Zinc therefore, Li + ZnCO₃ reaction will most likely take place. Therefore, option (C) is correct.
What is reactivity series?The reactivity series or the activity series can be defined as the arrangement of metals or elements in the descending order of their reactivities.
The metals at the top of the reactivity series are powerful reducing agents and can be readily oxidized and easily corrode. The reducing ability of metals becomes weaker while moving down the reactivity series.
Lithium is more reactive than Zn so it can displace Zinc from zinc carbonate therefore, Li + ZnCO₃ reaction will most likely take place. Pt is less reactive than Fe so it can not displace Fe from FeCl₃ therefore, Pt + FeCl₃ reaction will not take place.
Learn more about the reactivity series, here:
brainly.com/question/13960839
#SPJ1
Answer:
c
Explanation:
edge 2023
if there were any other acids other than acetic acid present in vinegar, how would this affect your results
It would be challenging to calculate the percentage of simply acetic acid in vinegar if other acids were also present since they would mix with it.
Describe acid.A chemical that creates salts when it combines with specific metals while also releasing hydrogen atoms into water. Acids have a sour taste and give some colors, a reddish tint. Acids generated by the body, such stomach acid, can assist organ function. One type of acid is hydrochloric acid.
Where does acid come from?For instance, they can be used as an essential component in the chemical industry, like an electrolyte in a wet-cell battery (like a car battery), and to remove rust from metals.
To know about acid visit:
https://brainly.com/question/1512259
#SPJ4
s the electrical conductivity of carbonated water better than, worse than or similar to the electrical conductivity of pure water?
A poor conductor of electricity is pure water. The electric conductivity of regular distilled water is around 10 times when it is in equilibrium with atmospheric carbon dioxide.
Does carbonated water have more conductivity?On the other hand, it was discovered that different types of water had significantly varying conductivities, which indicate the overall amount of dissolved solids. And as predicted, pure water had the lowest conductivity while carbonated water had the greatest.
Does carbonation affect conductivity in any way?When the graphene content is less than 2.0%, it is discovered that electrical conductivity increases with increasing carbonation depth. In this instance, the cement matrix, which can be improved by carbonation product through filling pores, determines the electrical conductivity of the composite.
To know more about electric conductivity visit:-
https://brainly.com/question/5759256
#SPJ4
Radiation Exposure from Dental X-rays Dental X-rays expose patients to about 5.00 μSv of radiation. 4th attempt Part 1 (I point) Feedback Given an RBE of 1.00 for X-rays, how many micrograys of radiation does 5.00 μSv represent?
The energy of radiation exposure from dental X-rays per given weight is 272.5 μJ.
The dental assistant can respond to this patient's concerns by telling the patient that the amount of radiation coming from the x-ray is minimal and will have no negative effect.
Given,
mass = 54.5 kg
Radiation = 5 μSv
Now
Energy per kg = 5 μSv *10⁻⁶ Sv / 14 Sv * 1 J/Kg/ 1 Sv
Energy per kg = 5 * 10⁻⁶ J/Kg
Then,
Energy per given weight of 54.5 kg
Energy per given weight = (54.5 kg)*(5*10⁻⁶)
Energy per given weight = 272.5 * 10⁻⁶ J
Therefore, energy of radiation exposure from dental X-rays per given weight is 272.5 μJ.
To know more about Dental X-ray, refer: https://brainly.com/question/29157665
#SPJ4
a steel tank contains 40.0 g of n2, 50.0 g of o2, and 10.0 g of he gases at a total pressure of 8.0 atm. what is the partial pressure (in atm) of he in the tank?
The partial pressure of He in the tank when total pressure is given is calculated as : 3.649 atm.
What is partial pressure?When a container is filled with more than one gas, then each gas exerts pressure. So , the pressure of any one gas within the container is called its partial pressure.
Given 40 g of N2 ; 50 gm of O2 and 10 g of He
Total pressure given 8 atm
Moles of O2 = 50/32
=1.56 moles
Moles of N2 = 40/28
= 1.42 moles
Moles of He = 10/4
= 2.5 moles
Total number of moles= 1.56 + 1.42 + 2.5
= 5.48 moles
= (2.5/5.48) * 8
Partial pressure of He =3.649 atm.
To know more about partial pressure, refer
https://brainly.com/question/16118479
#SPJ4
Consider these two electron configurations for neutral atoms l and m. L - 1s22s22p63s2 m - 1s22s22p63s13p1 what is the atomic number of l 10 12 1 6.
The atomic number will be 12 and the element is magnesium.
What is electronic configuration?
Also called electronic structure ,it is the arrangement of electrons in orbits around the nucleus. The electron configuration of atoms in quantum mechanical models is given by ordering the occupied orbitals in order of packing, with the number of electrons in each orbital indicated as a superscript.
What is atomic number?
The atomic number, or atomic number of a chemical element, is the number of electric charges in the nucleus. For normal atomic nuclei, this equals the number of protons, or the number of protons found in the nucleus of each atom of that element.
Therefore, the atomic number will be 12 and the element is magnesium.
To know more about electronic configuration, check out:
https://brainly.com/question/26084288
#SPJ4
How many grams of CO would be
required to generate 635 g CO2?
Fe2O3 + 3CO → 2Fe + 3CO2
CO: 28.01 g/mol
CO2: 44.01 g/mol
[?] g CO₂
404.14 grams of CO will be needed to produce 635 g of CO₂ in this scenario.
The definition of stoichiometric co-efficient.The stoichiometric coefficient is the number put in front of the atoms, ions, and molecules in a chemical reaction to balance the amount of each element on the reactant and product sides of the equation.
In most cases, it is favorable for products and unfavorable for reactants. The stoichiometry of a chemical reaction is determined by stoichiometric coefficients.
Let's start by obtaining the reaction's equation:
The given reaction: Fe₂O₃ + 3CO → 2Fe + 3CO₂
We can see from the equation that the mole ratio of CO to CO2
The mole ratio of CO to that of CO₂= 3:3
The mole ratio of CO to that of CO₂= 1:1
Given that,
635 g of CO₂ is to be generated.
Mole of 635 g CO₂ = mass/molar mass = 635/44.01 = 14.43 moles
Thus, the equivalent mole of CO required will also be 14.43 moles.
Mass of 14.43 moles of CO = moles x molar mass
Mass of 14.43 moles of CO = 14.43 x 28.01
Mass of 14.43 moles of CO = 404.14 gm.
To produce 635 g of CO2, 404.14 gm of CO will therefore be needed.
To know more about Fe₂O₃ visit:
https://brainly.com/question/8993935
#SPJ1
calculate the ph of a buffer in which the concentration of hocl is 6.50 x 10-4 m and that of naocl is 7.50 x 10-4 m. the ka of hocl is 3.0 x 10-8. show work. pay attention to significant figures.
The pH of a buffer in which the concentration of HOCl is 6.50 x 10⁻⁴ M and that of NaOClis 7.50 x 10⁻⁴ M( the ka of HOCl is 3.0 x 10⁻⁸) is 7.51.
We can find out the pH of the buffer solution by Henderson-Hasselbalch equation, derived by Lawrence Joseph Henderson and Karl Albert Hasselbalch. It is given as:
pH = pKa + log [A⁻] / [HA]
Here,
pH is the acidity of the solution
pKa is the negative logarithm of Ka (ionization constant of acid)
[A⁻] is the concentration of salt/ conjugate base
and [HA] is the concentration of acid.
given,
concentration of NaOCl, [A⁻] = 7.50× 10⁻⁴ M
concentration of HOCl [HA] = 6.50 × 10⁻⁴ M
Ka of HOCl = 3.0 × 10⁻⁸
∵ pKa = -log(Ka)
pKa = -log(3.0 × 10⁻⁸)
pKa= 7.45
Putting these values in Henderson-Hasselbalch equation:
pH = 7.45 + log 7.50× 10⁻⁴ M/6.50 × 10⁻⁴ M
pH = 7.45 + log 7.50/6.50
pH = 7.45 + log 1.15
pH = 7.45 + 0.06
pH = 7.51
Thus, the pH of the buffer is 7.51.
To know more about pH of a buffer here
https://brainly.com/question/14748875
#SPJ4
Hat solution can you add to of the mixture of sr2 (aq)sr2 (aq) and hg22 (aq)hg22 (aq) to precipitate one cation while keeping the other cation in solution?
SrCl₂ is soluble salt to precipitate one cation while keeping the other cation in solution.
What is cation & anion?Cations are ions that are polarized. Anions are the name for negatively charged ions. Ions are charged atoms or molecules. If one or more of an atom's electrons are removed, it will transform from a balanced atom together into positive charges cation. If an unbalanced atom gains one or more electrons, it will transform into a negatively charged anion.
Briefing:Due to mercurous, we can dilute any solution containing chloride ions to use as a NaCl solution.
Hg₂²⁺ is made up of group I cations that precipitated as chloride Sr²⁺ is from group V .
Net ionic equation:
Hg₂²⁺ + 2 Cl⁻ → Hg₂Cl₂
while SrCl₂ is soluble salt.
To know more about Cation visit:
https://brainly.com/question/28710898
#SPJ4
If a package has 3 servings and one serving has 300 calories. How many calories are you eating if you eat the whole package?.
If you eat the whole package, you would be eating a total of 900 calories.
What is calorie?
Calories are a measure of energy. Two main meanings of "calorie" are frequently used due to historical factors. The amount of heat required to increase the temperature of one kilogramme of water by one degree Celsius was the original definition of the huge calorie, food calorie, as well as kilogramme calorie (or one kelvin). The amount of heat required to produce the same rise in one gramme of water was known as the small calorie or gramme calorie. As a result, 1000 small calories are equal to 1 large calorie. The term "calorie" and the symbol "cal" almost always refer to the large unit in food and nutrition science.
If you eat the whole package, you would be eating a total of 900 calories (3 servings x 300 calories per serving = 900 calories).
To learn more about calorie
https://brainly.com/question/1061571
#SPJ4
which type of test should be used to determine if lab 1 is reporting lower cholesterol levels, on average, than lab 2?
A cholesterol test is a blood test that quantifies your blood's levels of cholesterol and certain fats. Every cell in your body, including the ones that make up your blood, contains cholesterol, a waxy, fatty-like substance.
What are the most common chemistry tests?Elevated blood ammonia (BUN) and creatinine are measured during kidney function testing, often known as renal panels. Aspartate analyzer (ALT), alkaline phosphatase (ALP), transaminase (AST), bilirubin, albumin, and total protein are all measured in liver function tests.
Why are lab tests necessary?In patients suffering from viral infections or immunological disorders, scientific tests are particularly helpful in establishing a diagnoses, predicting clinical symptoms, and tracking disease progression. In the management of diseases, timely diagnostic evaluation and the use of accurate tests are crucial.
To know more about Lab test visit:
https://brainly.com/question/2718557
#SPJ4
350cubic centimetres of dilute hydrochloric acid in an experiment, what is this in dm3
350 cubic centimetres of dilute hydrochloric acid will be equivalent to 0.35 [tex]dm^3[/tex].
Volume ConversionThe problem here has to do with converting the volume of a liquid from cubic centimetres to [tex]dm^3[/tex].
Recall that:
1 centimetre = 0.1 dm
Thus:
1 cubic centimetre = 0.001 cubic decimetre or [tex]dm^3[/tex]
In this case, we are to convert 350 cubic centimetres to cubic decimetres.
If, 1 cubic centimetre = 0.001 cubic decimetre, then
350 cubic centimetres = 350 x 0.001
= 0.35 [tex]dm^3[/tex]
In other words, 350 cubic centimetres of dilute hydrochloric acid would be equivalent to 0.35 [tex]dm^3[/tex] of the dilute acid.
More on volume conversion can be found here: https://brainly.com/question/13259295
#SPJ1
what is the maximum bond order that is possible for a bond between elements in the first two rows of the periodic table?
The Mo and W diatoms symbolize the greatest bond order attained between two atoms in the periodic table, which is six.
Can a bond order have more than three bonds?Bond order is the number of electron bonding pairs that exist between two atoms. A quadruple bond is a form of chemical relationship that involves eight electrons between two atoms. This bond is a variation on the more common double and triple bonds.
The number of bonds that an atom may make is frequently predicted by the number of electrons required to achieve an octet (eight valence electrons); this is notably true .
When three pairs of electrons come together, they create a triple bond.
learn more about W diatoms refer
https://brainly.com/question/1213876
#SPJ4