Which type of mass movement is likely to result in considerable property damage, but rarely causes loss of life? a. debris avalanche b. rock fall c. mudflow d. creep

Answers

Answer 1

Answer:

The correct answer is D. Creep.

Explanation:

Ground creep is a slow downward movement of a hill or mountain slope without the formation of demolition forms. The decisive factor for this is the continuous flow of movement of the soil.

The main driver of collapse is the movement of the surface layer particles during expansion in a direction perpendicular to the slope, followed by vertical collapse on contraction. The visible effect of the collapsing is the inclination of fences and poles, as well as trees that grow out of the ground towards the slope and have trunks curved vertically, in more extreme cases it may be cracks on the walls of buildings.


Related Questions


Find the mass of an object on planet F if its weight is 650 N (g = 13m/s^2)

Answers

Answer:

the object's mass is 50 kg

Explanation:

We use Newton's second law to solve for the mass:

F = m * a , then   m = F / a

In our case, the acceleration is the gravitational acceleration on the planet, and the force is the weight of the object on the planet. So we get:

m = w / a = 650 N / 13 m/s^2 = 50 kg

Then, the object's mass is 50 kg.

A uniform electric field has a magnitude of 10 N/C and is directed upward. A charge brought into the field experiences a force of 50 N downward. The charge must be:_______.

Answers

Answer:

q = 5 C

Explanation:

The electric field is defined as the force experienced by a unit charge when it is brought into the field. Hence, the formula used to find the electrical field is given as follows:

E = F/q

where,

E = Electric Field Magnitude = 10 N/C

F = Force Experienced by the test charge = 50 N

q = Magnitude of the Charge = ?

Therefore,

10 N/C = 50 N/q

q = 50 N/(10 N/C)

Therefore,

q = 5 C

Sona wants to install room heater in her living room. She had only two options, either to install heater at the top of the window or near the ground level. . Which method of installing room heater would be the effective way . Why or Why not ?

Answers

Installing the heater near ground level is the better option because heat rises so putting it near the bottom will allow the warmth to rise and warm up more of the air in the room. Especially if it’s below the window because it will heat the cool air seeping through the window.

A 36.3 kg cart has a velocity of 3 m/s. How much kinetic energy does the object have?

Answers

Answer:

163.35

__________________________________________________________

We are given:

Mass of the object (m) = 36.3 kg

Velocity of the object (v) = 3 m/s

Kinetic Energy of the object:

We know that:

Kinetic Energy = 1/2(mv²)

KE = 1/2(36.3)(3)²            [replacing the variables with the given values]

KE = 18.15 * 9

KE = 163.35 Joules

Hence, the cart has a Kinetic Energy of 163.35 Joules

The propeller of an aircraft accelerates from rest with an angular acceleration α = 7t + 8, where α is in rad/s2 and t is in seconds. What is the angle in radians through which the propeller rotates from t = 1.00 s to t = 6.10 s?

Answers

Answer:

The value  is  [tex]\theta =407.3 \ radian[/tex]

Explanation:

From the question we are told that

    The angular acceleration is  [tex]\alpha = (7t + 8) \ rad/ s^2[/tex]

    The first time is  [tex]t_1 = 1.00 \ s[/tex]

    The second time [tex]t_2 = 6.10 \ s[/tex]

Generally the angular velocity is mathematically represented as

     [tex]w = \int\limits {\alpha } \, dt[/tex]

=>  [tex]w = \int\limits {7t + 8 } \, dt[/tex]

=>  [tex]w =\frac{ 7t^2}{2} + 8 t[/tex]

Generally the angular displacement  is mathematically represented as

[tex]\theta = \int\limits^{t_2}_{t_1} { w} \, dt[/tex]

=>  [tex]\theta = \int\limits^{t_2}_{t_1} { \frac{7t^2}{2} + 8t } \, dt[/tex]

=>  [tex]\theta = { \frac{7t^3}{6} + \frac{8t^2}{2} } | \left \ t_2} \atop {t_1}} \right.[/tex]

=> [tex]\theta = { \frac{7t^3}{6} + 4t^2} } | \left \ 6.10} \atop {1}} \right.[/tex]

=> [tex]\theta =[ { \frac{7}{6}[6.10 ]^3 + 4[6.10]^2} } ] -[ { \frac{7}{6}[1 ]^3 + 4[1]^2} } ][/tex]

=> [tex]\theta =407.3 \ radian[/tex]

what is gathering and analyzing information about an object without physical contact with the object

Answers

Answer:

Remote Sensing

Explanation:

Your teacher placed a 3.5 kg block at the position marked with a “ + ” (horizontally, 0.5 m from the origin) on a large incline outlined on the graph below and let it slide, starting from rest. ***There are two images included!***

Answers

Answer:

 x = 10.75 m

Explanation:

For this problem we will solve it in two parts, the first using energy and the second with kinematics

Let's use the energy work relationship to find the velocity of the block as it exits the ramp

       W = [tex]Em_{f}[/tex] - Em₀

Starting point. Higher

       Em₀ = U = m g h

the height from the edge of the ramp of the graph has a value

        h = 9-3 = 6 m

Final point. At the bottom of the ramp

       Em_{f} = K = ½ m v²

Friction force work

      W = - fr  d

The friction force has the formula

      fr = μ N

 

On the ramp, we can use Newton's second law

         N - W cos θ = 0

         N = W cos θ

where the angle is obtained from the graph

         tan θ = (9-3) / (0.5-4) = -6 / 3.5

         θ = tan⁻¹ (-1,714)

         θ = -59.7º

the distance d is

         d = √ (Δx² + Δy²)

         d = √ [(0.5-4)² + (9-3)²]

         d = 6.95 m

for which the work is

       W = - μ mg cos 59.7 d

we substitute

        W = Em_{f} -Em₀

        - μ mg cos 59.7 d = ½ m v² - m g h

In the graph o text the value of the friction coefficient is not observed, suppose that it is μvery = 0.2

        - μ g cos 59.7 d = ½ v² - g h

         v² = 2g (h - very d coss 59.7)

let's calculate

         v² = 2 9.8 (6 - 0.2 6.95 cos 59.7)

         v = √ 103.8546

         v = 10.19 m / s

in the same direction as the ramp

in the second part we use projectile launch kinematics

       

let's look for the components of velocity

         v₀ₓ = vo cos -59.7

         [tex]v_{oy}[/tex] = vo sin (-59,7)

         v₀ₓ = 10.19 cos (-59.7) = 5.14 m / s

         v_{oy} = 10.19 if (-59.7) = -8.798 m / s

Let's find the time to get to the floor (y = o)

          y = y₀ + v_{oy} t - ½ g t²

to de groph y₀=3 m

          0 = 3 - 8.798 t - ½ 9.8 t²

          t² - 1.796 t - 0.612 = 0

we solve the quadratic equation

          t = [1.796 ±√(1.796² + 4 0.612)] / 2

          t = [1,795 ± 2,382] / 2

          t₁ = 2.09 s

          t₂ = -0.29 s

since time must be a positive quantity the correct value is t = 2.09 s

we calculate the horizontal displacement

          x = v₀ₓ t

          x = 5.14 2.09

          x = 10.75 m

The motion of the box, after it exits the incline is the motion and trajectory

of a projectile.

Horizontal distance from the right-hand edge of the incline to the point of

contact with the floor is approximately 1.24613 m.

Reasons:

Mass of the block,  m = 3.5 kg

Coefficient of kinetic friction, μ = 1.2

Location of the = 0.5 m from the origin

Required:

Horizontal distance between the block's point of contact with the floor and

the bottom right-hand edge of the incline.

Solution:

Let θ represent the angle the incline make with the horizontal.

The normal reaction of the incline on the block, [tex]F_N[/tex] = m·g·cos(θ)

Work done on friction = [tex]F_N[/tex]×μ×Length of the incline, L

Rise of the incline = 10 - 3 = 7

Run of the incline = 4

L = √(6.125² + 3.5²) = [tex]\dfrac{7 \times \sqrt{65} }{8}[/tex]

Let ΔP.E.₁  represent the potential energy transferred to kinetic energy

and work along the incline, we have;

Energy of the block at the bottom of the incline, M.E.₂, is found as follows;

K.E.₂ = mgh - m·g·μ·cos(θ)·L

[tex]K.E. =\frac{1}{2} \times 3.5 \times v^2 = 3.5 \times 9.81 \times 6.125 - 3.5 \times 9.81 \times 1.2 \times \dfrac{4}{\sqrt{65} } \times \dfrac{7 \times \sqrt{65} }{8}[/tex]

v ≈ 6.1456 m/s

The vertical component of the velocity is therefore;

[tex]v_y = v \cdot sin(\theta)[/tex]

[tex]v_y = 6.1456 \times \dfrac{7}{\sqrt{65} } \approx 5.33588[/tex]

From the equation, h = u·t + 0.5·g·t² derived from Newton's Laws of motion, we have;

ΔP.E.₁ = 3.5×9.81×7

3 = 5.33588·t + 0.5×9.81·t²

Factorizing, the above quadratic equation, we get;

The time it takes the block to reach the floor, t ≈ 0.40869 seconds

Horizontal component of the velocity is [tex]v_x \approx 6.1456 \times \dfrac{4}{\sqrt{65} } \approx 3.04908[/tex]

The horizontal distance, x = vₓ × t

∴ x = 3.04908 × 0.40869 ≈ 1.08194

Horizontal distance from the right-hand edge of the incline to the point of

contact with the floor, x ≈ 1.24613 m.

Learn more here:

https://brainly.com/question/24888457

We will now determine the indexes of refraction for two Mystery materials, A and B. These materials can be selected from the list of materials on the right. Be sure to set your laser pointer to a frequency of 589 nm. Questions:A. Devise an experiment for determining the indices of refraction for these. Explain your methodology. B. What are the indices of refraction for the two mystery materials, A and B?

Answers

Answer:

A) refraction experiment   n = n₁ sin θ₁ / sin θ₂

B)  n_A = 1.19 ,    n_B = 1.53

Explanation:

A) This exercise is a method to measure the refractive index of materials, a very useful and simple procedure is to create a plate of known thickness from each material, place the material on a paper with angle measurements (protractor), incline the laser beam and measure the angles of incidence and refraction (within the material), repeat for about three different angles of incidence and use the equation of refraction to determine the index

            n₁ sin θ₁ = n₂ sinθ₂

            n₂ = n₁ sin θ₁₁ /sin θ₂

If the medium surrounding the plate is air, its refractive index is n₁ = 1, the final expression is

            n = n₁ sin θ₁ / sin θ₂

B) For this part, no data are given in the exercise, but we can take 50º as the angle of incidence and measure the angle of refraction. Suppose it is 40º for material A and 30º for material B, the refractive index would be

         

material A

             n_A = sin 50 / sin 40

             n_A = 1.19

material B

              n_B = sin 50 / sin30

              n_B = 1.53

A current of 3.75 A in a long, straight wire produces a magnetic field of 2.61 μT at a certain distance from the wire. Find this distance.

Answers

Given :

Current, I = 3.75 A .

Magnetic Field, [tex]B = 2.61\times 10^{-4}\ T[/tex]

To Find :

The distance from the wire.

Solution :

We know,

[tex]B = K\dfrac{2i}{d}\\\\d = 10^{-7}\times \dfrac{2\times 3.75}{2.61\times 10^{-4}}\\\\d = 0.00287\ m \\\\d = 2.87\times 10^{-3}\ m[/tex]

Hence, this is the required solution.

Select the correct answer.
The motion of a car on a position-time graph is represented with a horizontal line. What does this indicate about the car's motion?

A. It's not moving.

B.It's moving at a constant speed.

C.It's moving at a constant velocity

D.It's speeding up.

Answers

Answer:

It isn't moving

Explanation:

I NEED THIS ASAP!!
Which formula defines the unit for electrical power?

Answers

C option
Power = voltage x current

Answer:

1 W = 1 V x 1 A

Explanation:

Other dude is wrong this is right

A student throws a 110 g snowball at 6.5 m/s at the side of the schoolhouse, where it hits and sticks.
What is the magnitude of the average force on the wall if the duration of the collision is 0.19 s ?

Answers

Answer:

3.6N

Explanation:

Impulse is the change of momentum of an object when the object is acted upon by a force for an interval of time.

the expression is Ft=mv

where F= force

 m= mass

t= time

v= velocity

Step one:

given data

mass m= 110g= 0.11kg

velocity v= 6.5m/s

time t= 0.19seconds

Step two:

we also know that the force on impulse is given as

Ft=mv

F=0.11*6.5/0.19

F=0.715/0.19

F=3.76N

The magnitude of the average force on the wall if the duration of the collision is 0.19 is 14N

The components of lifetime fitness include all of the following components except

Answers

Answer:it’s A

Explanation:

because i took the quiz

Answer:

D is the correct answer, not A

Explanation:

A typical elevator car with people has a mass of 1500.0 kg. Elevators are currently approaching speeds of 20.0 m/s - faster than the speed.

Required:
What is the upward force required if the elevator moves upward 200.0 meters before reaching 20.0 m/s?

Answers

Answer:

1500N

Explanation:

Force = mass * acceleration

Given

Mass = 1500kg

Get the acceleration using the equation of motion;

v² = u²+2aS

20² = 0+2s(200)

400 = 400a

a = 400/400

a = 1m/s²

Get the upward force required

F = 1500 * 1

F = 1500N

Hence the upward force required if the elevator moves upward 200.0 meters before reaching 20.0 m/s is 1500N

What percentage of an iron anchor’s weight will be supported by buoyant force when submerged in salt water?

Answers

Answer:

0.87

Explanation:

To solve this, we use the principle of Archimedes. Archimedes Principal of flotation states that "the buoyant force of an object is equal to the total weight of the fluid it displaces."

In the attachment, I stated the mathemacal formula, of which

F(B) = The buoyant force

w(fl) = The weight of the salt water displaced

p(iron) = density of iron

p(salt) = density of the salt water = 1025 kg/m³

F' = weight of the iron in air

F = weight of the iron in salt water

p(man) = density of man = 7680 kg/m³

The rest are the easy calculations done by substituting the values

A medicine ball has a mass of 5kg and is thrown with a speed of 3 m/sec what is it's kinetic energy

Answers

KE = 1/2mv^2

KE = 1/2 (5kg)(3m/s)

KE = 22.5 J

On a surface of a planet of radius R and mass M the acceleration due to gravity is 7m/s?. Consider another planet of radius 2R and mass 0.4M. What would the acceleration due to gravity be on this new planet? Show your calculations.

Answers

Answer:

0.7 m/[tex]s^{2}[/tex]

Explanation:

From Newton's law of universal gravitation,

F = [tex]\frac{GMm}{r^{2} }[/tex]

and from Newton's second law of motion,

F = mg

So that;

mg = [tex]\frac{GMm}{r^{2} }[/tex]

⇒ g = [tex]\frac{GM}{r^{2} }[/tex]

For the first planet,

7 = [tex]\frac{GM}{R^{2} }[/tex]

⇒ G = [tex]\frac{7R^{2} }{M}[/tex] .............. 1

For the second planet,

g = [tex]\frac{0.4GM}{(2R)^{2} }[/tex]

   = [tex]\frac{0.4GM}{4R^{2} }[/tex]

⇒ G = [tex]\frac{4gR^{2} }{0.4M}[/tex] ............. 2

Equating 1 and 2, we have;

[tex]\frac{7R^{2} }{M}[/tex] = [tex]\frac{4gR^{2} }{0.4M}[/tex]

g = [tex]\frac{7R^{2} *0.4M}{4R^{2}M }[/tex]

  = [tex]\frac{7*0.4}{4}[/tex]

  = [tex]\frac{2.8}{4}[/tex]

g = 0.7

Therefore, the acceleration due to gravity on the new planet is 0.7 m/[tex]s^{2}[/tex].


A material that provides resistance to the flow of electric current is called a(n):

circuit

conductor

insulator

resistor

Answers

Answer:

it's an insulator

Explanation:

Insulators provides resistance

Answer:

C. insulator

Explanation:

The speed of a space shuttle is 10 / express this in /�

Answers

Answer:

268.22m/s

Explanation:

Given;

    10mile/min to m/s

We need to convert between the two units;

    1 mile  = 1609.34m

     60s  = 1min

Now;

    10 x [tex]\frac{mile}{min}[/tex] x [tex]\frac{1min}{60s}[/tex] x [tex]\frac{1609.34m}{1mile}[/tex]

  = 268.22m/s

An extraterrestrial creature is standing in front of plane mirror. The height of this creature is H and we know that this creature has eyes positioned h below the top of its head. This creature sees its reflection which fit exactly the mirror, it means, this creature can just see the top of head and the bottom of its feet (or whatever it uses for motion). We can conclude that the top of a mirror is exactly:________

a. H/2 above the ground
b. H above the ground
c. (H-h/2) above the ground
d. (H-h) above the ground
e. We can not guess anything without information about the nature of this creature.

Answers

Answer:

c. (H-h/2) above the ground

Explanation:

The mirror must be at least half as tall as the alien, and its base must be located at half of the distance between the alien's eyes and the ground (assuming that the alien doesn't float or levitate).

This question is about the Law of Reflection which states that the angle of reflection = angle of incidence.

I attached an image that can help you understand the concept, although the alien is not included.

In 1993, Wayne Brian threw a spear at a record distance of 201.24 m. (This is not an official sports record because a special device was used to “elongate” Brian’s hand.) Suppose Brian threw the spear at a 35.0° angle with respect to the horizontal. What was the initial speed of the spear? 2. Find the maximum height and time of flight of the spear in problem #1.

I really don't know how to do any of this please help me :(

Answers

Answer:

V₀ = 45.81 m/s

H = 70.45 m

T = 5.36 s

Explanation:

The motion of the spare is projectile motion. Therefore, we will first use the formula of range of projectile:

R = V₀² Sin 2θ/g

where,

R = Range of Projectile = 201.24 m

V₀ = Initial Speed = ?

θ = Launch Angle = 35°

g = 9.8 m/s²

Therefore,

201.24 m = V₀²[Sin 2(35°)]/9.8 m/s²

V₀ = √[(201.24 m)/(0.095 m/s²)

V₀ = 45.81 m/s

Now, for maximum height:

H = V₀² Sin² θ/g

H = (45.81 m/s)² Sin² 35°/9.8 m/s²

H = 70.45 m

For the total time of flight:

T = 2 V₀ Sin θ/g

T = 2(45.81 m/s) Sin 35°/9.8 m/s²

T = 5.36 s

Having established that a sound wave corresponds to pressure fluctuations in the medium, what can you conclude about the direction in which such pressure fluctuations travel?A) The direction of motion of pressure fluctuations is independent of the direction of motion of the sound wave.B) Pressure fluctuations travel perpendicularly to the direction of propagation of the sound wave.C) Pressure fluctuations travel along the direction of propagation of the sound wave.D) Propagation of energy that passes through empty spaces between the particles that comprise the mediumDoes air play a role in the propagation of the human voice from one end of a lecture hall to the other?a) yesb) no

Answers

Answer:

None of them: the direction of the pressure fluctuations is parallel to the direction of motion of the wave

Explanation:

When two RF signals on the same frequency arrive at a receiver at the exact same time and their peaks and valleys are in alignment, what is true about these signals?

Answers

Answer:

The two RF signals are in phase.

Explanation:

A wave is a disturbance that travels through a medium which transfers energy from one point to another in the medium without causing any permanent displacement of the particles of the medium.

Characteristics of waves include frequency, wavelength, velocity, etc.

Two types of waves are longitudinal and transverse wave. Radio Frequency (RF) signals travel in the form of transverse waves which have regions of maximum and minimum displacements called crests and troughs.

Travelling waves with  the same frequency may be said to be in phase or out of phase depending on whether their crests/peaks or troughs/valleys are reached at the same instant of time.

When two RF signals on the same frequency arrive at a receiver at the exact same time and their peaks and valleys are in alignment or in step, they are said to be in phase.

The phase of a wave involves the relationship between the position of the amplitude peaks and valleys of two waveforms.

A twirlers baton is 0.76 m long and spins around its center. The end of the baton has a centripetal acceleration of 47.8 m/s2?

A 0.31 s
B 0.56 s
C 4.3s
D 70s

Answers

Answer:

C. 4.3 seconds

Explanation:

B 0.56 s is the time period of a twirlers baton.

What is Centripetal Acceleration?

Centripetal acceleration is defined as the property of the motion of an object which traversing a circular path.

Any object that is moving in a circle and has an acceleration vector pointed towards the center of that circle is known as Centripetal acceleration.

The centripetal acceleration is given by:

a = 4π²R/T²

Given values are:

a = 47.8 m/s²

D = 0.76 m  so , R = 0.76/2 = 0.38m

Using this formula,

47.8*T² = 4π² x0.38

T² = [tex]\frac{4*3.14^2*0.38}{47.8}[/tex]

T = 0.56 s

Therefore,

A twirlers baton is 0.76 m long and spins around its center. The end of the baton has a centripetal acceleration of 47.8 m/s2 which have  time period of 0.56 s.

Learn more about Centripetal acceleration here:

https://brainly.com/question/14465119

#SPJ5

.

If a ball rolls across a table to the left with constant speed, which of the following is true about the force(s) on the ball? (3a1)

Question 10 options:

There cannot be any forces applied to the ball.


There must be exactly one force applied to the ball.


The net force applied to the ball is zero.


The net force applied to the ball is directed to the right.

Answers

Answer:

C. The net force applied to the ball is zero.

Explanation:

From Newton's second law of motion;

F = ma

Where F is the force on an object, m is its mass and a is its acceleration.

Therefore, the force on an object is a product of its mass and acceleration as it travel from one point to another.

Since acceleration relates to the rate of change in velocity to time. Then when the object moves at uniform velocity (especially along a straight path), its acceleration is zero.

So that;

F = m x 0

  = 0

No force is applied on the object.

Therefore for the ball in the given question, the net force applied to the ball is zero because it rolls with constant speed along a straight path.

if you increase the frequency of a wave by 5x whats it’s period?

Answers

We know that Period of a wave is the inverse of its Frequency

So,  Period = 1 / Frequency

From the above, we can say that Period is inversely proportional to Frequency and hence, any change in Frequency will be the inverse change in the period

Therefore, we can say that if the frequency is increased by 5 times, the period will increase by 1/5 times

explain the relationship among visible light, the electromagnetic spectrum, and sight.

Answers

Explanation:

The electromagnetic spectrum is the name given to the full range of frequencies and/or wavelengths that electromagnetic phenomena may have.

Human eyes respond to a small range of wavelengths in that spectrum. That response is called sight. Because humans can see that electromagnetic energy, it is called visible light.

A boxer is punching the heavy bag. The impact of the glove with the bag is 0.10s. The mass of the glove and his hand is 3kg. The velocity of the glove just before impact is 25m/s. What is the average impact force exerted on the glove?

Answers

Answer:

750N

Explanation:

Impulse is the change of momentum of an object when the object is acted upon by a force for an interval of time.

the expression is Ft=mv

where F= force

           m= mass

             t= time

            v= velocity

Step one:

given data

mass m=3kg

velocity v= 25m/s

time t= 0.10seconds

Step two:

we also know that the force on impulse is given as

Ft=mv

F=3*25/0.10

F=75/0.10

F=750N

The magnitude of the average force on the heavy bag if the duration of the collision is 0.1 is 750N

Any five physics problems

Answers

Explanation:

There are still some questions beyond the Standard Model of physics, such as the strong CP problem, neutrino mass, matter–antimatter asymmetry, and the nature of dark matter and dark energy.

Which statement best describes a characteristic of gases?

Gases can be compressed, or squeezed together.
The particles of gases are packed close together.
The particles of gases spread our vertically instead of horizontally.
Gases have a definite shape and volume.

Answers

Answer:

A

Explanation:

I'm pretty sure it's A. That's the one that makes the most sense and checks out

Answer:

Just here to confirm that it is A

Explanation:

Other Questions
BPS reported the following data for its first year of operations: Sales Revenue $8,000 Cost of Goods Available for Sale 6,200 Operating Expenses 900 Sales Returns & Allowances 640 Sales Discounts Ending Merchandise Inventory: If LIFO is used 820 If FIFO is used 128 925 What is the company's net income if LIFO is elected? A. None of the other 4 answer choices provided are correct. B. $132 C. $1,057 D. $952 E. $1,720 In what year, Filippo Brunelleschi demonstrated the geometrical method of perspective by painting the outlines of various Florentine buildings onto a mirror? Please help it would mean alot! Points and brinliast! Please report lostkq for threats, homophobia and blatent hate, no one likes a bigot hon Wayne has 2 pet spiders. Each spider has 8 legs. What is the ratio of spiders to the total number of legs? Keith has data in row 12. However, he would actually like that row to be empty. Keith should _____. A.) double-click on cell A12 and press Backspace B.) highlight row 12 and press Delete C.) use the arrow keys to move to row 12 and press Enter or Return D.) use the mouse to click row 12 and press the space bar A bowl contains blueberries and strawberries. There are a total of 20 berries in the bowl. The ratio of blueberries to strawberries is 4 : 1. How many of each berry are in the bowl? Which best compares kinetic energy and temperature? A gene that has been associated with a language disorder in humans and is quite different in apes is the HEELLPPP I WILL GIVE BRAINLIEST AND POINTS THANK YOU!!!This year, 450,000 animal lovers are expected to visit a zoo. By the end of February, only 0.064 of the expected number of visitors actually toured the zoo. How many visitors would have to come to the zoo in the months of March through December to fulfill the prediction for this year?The correct answer is 421,200. How do I reach that answer? A rectangle a photo with dimension 3 inches wide by 4 inches long is enlarged to a length of 12 inches what is the width of the enlarged print How long will it take to travel 200.000 m [N] traveling 10 m/s [N]? In what ways did the 1920s represent the benefits of the world? How does knowing the context of a piece affect our understanding? Choose one of the murals shown in the video to explain your answer. Which gives the best reason that rhyme has been used so much?A. It was once banned by powerful authorities,B. It helps make words memorable.C. It makes poetry seem more serious,D. It is surprising and unexpected in poetry,SUBMIT ^^^^^ doesnt have to be long, only like 2-4 sentences! (In your own words) please so that I can then put it into my own words :) Help me plz. The sides of a rectangular terrain are given by the expressions (x - 5) y(x 7) meters. Determine an algebraic expression that represents its area.Once the expression is obtained, what are the measures of the terrain, so itsarea is 195 m ? What is the perimeter of the terrain? Birth of the Earth Video QuestionsWhy has it been difficult for scientists to determine the age of the Earth? (3 items) What is the slope of a line parallel to the line that passes through (4, -3) and (3, -1)? Pls help me....3x+4+2x+6yb+9+1NEED HELP RIGHT NOW I'M AT SCHOOL PLSSSSS