Answer:
Frictional Force: Frictional force is the force caused by the relative motion of two surfaces that come into contact with each other.
The first observation of block oscillation was in a semiconductor superlattice with period 10nm.
Answer:How did family life under Prince Shotoku’s rule reflect Confucian ideals?
Women had rights and were equal to their husbands.
Children were taught to value individualism over community.
People were expected to give up worldly concerns and turn to nature.
Households were structured to maintain order, with the husband as head.
Explanation:
30 POINTS!!! CAN U AWNSER IT?? :)
A space ship is cruising at 2,500.0 km/hr with the engines off. The engines fire for 8.00s
with a thrust of 45,450 N, bringing the ship up to its new speed of 2,750 km/hr. What is the mass of the ship? GOOD LUCK :)
Answer:
5235.84 kg
Explanation:
There is one theorem - whose proof I will never remember without having to drag calculus in there - that says that the variation of momentum is equal to the force applied times the time the application last.
[tex]F\Delta t = m \Delta v[/tex] As long as the engine isn't ejecting mass - at this point it's a whole new can of worm - we know the force, we know the variation in speed, time to find the mass. But first, let's convert the variation of speed in meters per second. The ship gains 250 kmh, [tex]\Delta v = 69.4 m/s[/tex];
[tex]45 450 \cdot 8 = 69.4 m \rightarrow m = \frac{45450\cdot 8}{69.4} = 5235.84 kg[/tex]
a car is moving due south for 4hr and covered a distance of 144km what is the velocity of the car?
Answer:
velocity ,V=?,T=4hr,Distance ,144km,
V=distance divide by time
=144/4=36km/hr
Daniel is 50.0 meters away from a building. He observes that his line-of-sight to the tip of the building makes an angle of 63.0° with the horizontal. What is the height of the building?
Answer:
willie tower
Explanation:
mataas kasi
1. Explain why the energy of photoelectrons in XPS depends on energy of x-ray source, while energy of Auger electrons does not.
Answer:
Only part of the incident energy from an X-ray source may be used by the ejected electron (some of the energy can be used by the exiting photo electron and some of the energy by the exiting photon).
Auger electrons depend on the energy difference between energy levels of an atom and are fixed - so the ejected electron will have a fixed energy depending on the difference of energy levels of the atom. The Auger effect is called a "radiationless" transition because no radiation is detected outside of the atom.
Estimate under what set of conditions it is possible, despite the spherical shape of the working electrode, to use linear diffusion equations to theoretically predict the current vs voltage curve expected in this experiment.
When the experimental measurements diverge at very low values of the voltages. When the ratio of current to saturated current is very small. That is, i/I less than or equal to 1/100. When there is a finite current at Voltage
V = 0
Diffusion will have influence on current - voltage curve in the working electrode which is ionization detector.
The estimation under set of conditions that is possible, despite the spherical shape of the working electrode, to use linear diffusion equations to theoretically predict the current vs voltage curve expected in this experiment will be:
When the experimental measurements diverge at very low values of the voltageswhen the ratio of current to saturated current is very small. That is, i/I less than or equal to 1/100When there is a finite current at Voltage V = 0Where
i = electric current
I = saturated current
V = voltage supplied
The curve expected will therefore give exponential curve from positive to negative domain because of the diffusion of ions from different directions
Learn more here: https://brainly.com/question/23985719
What type of machine is used to measure the location of an earthquake epicenter.
Answer:
Seismometer
Explanation:
Seismometer measures Earth quake epicenter while seismograph measures Earth quake size
5 a
What causes the pressure of air at the Earth's surface?
Answer:
Atmospheric pressure is caused by the gravitational attraction of the planet on the atmospheric gases above the surface and is a function of the mass of the planet, the radius of the surface, and the amount and composition of the gases and their vertical distribution in the atmosphere
Explanation:
Can anyone help me with this question? I’ll give BRAINLIEST to whoever answers first
Answer:
a) F = 84.64N
b) The force has to increase.
Explanation:
First of all, let's convert everything to the same unit system:
Vo = 0 m/s Vf = 98 mi/h * 1609.34 m / 1mi * 1h / 3600s = 43.8m/s
d = 1.7m m = 0.15kg
We can calculate force as:
F = m*a where a is the acceleration experiencd by the ball and m is its mass.
In order to calculate acceleration, we can use this formula:
Solving for a:
Now, the force will be:
F = m * a = 84.6N
As we can see in that previous equation, the force is directly proportional to the mass of the ball, so, assuming the final speed of the ball is the same as before (that is, the acceleration is the same), the force will increase in the same proportion as the mass does.
what do u guys think of my drawing?
Answer: yess sirrrrrrrr
Explanation:
Answer:
oou I like it! u did a good job ^^
what is cheetah speed and strength?
Answer:
Speed: 109.4–120.7 km/h (68.0–75.0 mph)
Strength: Couldn't find out.
Explanation:
2. All objects contain both what and what charges.
Answer:
All objects are composed of these atoms. ... Charged objects have an imbalance of charge - either more negative electrons than positive protons or vice versa. And neutral objects have a balance of charge - equal numbers of protons and electrons.
Explanation:
4. symbol for the gravitational force ?
Answer: G
Explanation:
What is a lol diagram.
Answer:
LOL Diagrams
a way to represent how the energy is stored in the chosen system during various snapshots and to represent any changes in total energy for the system. Each “L” represents how the energy is stored during a particular snapshot (instant). The “O” shows the objects inside and outside the system.
an electric generator has an 18-cm-diameter, 120-turn coil that rotates at 60 hz in a uniform magnetic field that is perpendicular to the rotation axis.
The magnetic field strength is needed to generate a peak voltage 0.15 T.
The given parameters;
diameter of the coil, d = 18 cmradius of the coil, r = 9 cmnumber of turns, N = 120 turnsfrequency, f = 60 HzPeak voltage, E = 170 VThe area of the coil is calculated as follows;
[tex]A = \pi r^2\\\\A = \pi \times 0.09^2\\\\A = 0.0255 \ m^2[/tex]
The maximum emf induced in the coil is calculated as follows;
[tex]E_{max} = NBA \omega \\\\B = \frac{E_{max}}{NA\omega } \\\\[/tex]
where;
B is the magnetic field strengthω is the angular frequency = 2πf[tex]B = \frac{170 }{120 \times 0.025 \times 2\pi \times 60 } \\\\B = 0.15 \ T[/tex]
Thus, the magnetic field strength is needed to generate a peak voltage 0.15 T.
"Your question is not complete, it seems to be missing the following information";
An electric generator has an 18-cm-diameter, 120-turn coil that rotates at 60 hz in a uniform magnetic field that is perpendicular to the rotation axis.
What magnetic field strength is needed to generate a peak voltage of 170 V?
Learn more here:https://brainly.com/question/17238887
Compare the amplitude of these waves.
help?
Answer:
The greater the amplitude of a wave then the more energy it is carrying.
Explanation:
E is carrying the most energy which means that it has the highest amplitude
A has the least energy because it has the lowest amplitude
plz help will mark brainliest
Explanation:
The rod can be in equilibrium only if the resultant force is 0 and the moment around any point of the rod must be equal to 0.
We have to take moments around the pivoted point.
Moment = Force × Perpendicular distance to the force
For the rod to be in equilibrium,
Clockwise moment - Anticlockwise moment = 0
Clockwise moment = Anticlockwise moment
The distance between pivoted point and the weight of rod = 50 cm - 30 cm = 20 cm
So 20 cm× 1.2 N produces a Clockwise moment
If Perpendicular distance between pivoted point and 2N load is x,
Anticlockwise moment = x × 2N
20 cm× 1.2N = 2N × x
x = 12 cm
So 2 N load is at 12 from the pivoted point.
From the left edge of the meter ruler, 2N load is at 30-12 cm distance
= 18 cm
Answer: 18 cm
Explanation:
Help me quickly! please!!!
A cable pulls a car up a mountain with a force of 4 × 103 N at a vertical constant velocity of 5 m.s-1. It takes 5 minutes to reach the top.
(a)How much work is done in getting the car to the top?
(b)How much work would have been done if the vertical speed was 2,5 m.s-1?
(c)Calculate the power exerted on the cable car in those 5 minutes.
Answer:
(a) 6,000,000J
(b) 3,000,000J
(c) For A 20,000W
But for B 10,000W
The work done in getting the car to the top is equal to 6 ×10⁶ J. If the vertical speed is 2.5 m/s then, the work done will be 3 ×10⁶ J. The power exerted on the car is in 5 minutes is 20000 J/s.
What is work done ?In physics, work done is the dot product of force and displacement. Let w be the work done and F and ds be the force and displacement. Then
W = F.ds
It is given that the, the force of the cable is 4 × 10³ N. The velocity is 5 m/s and time is 5 minutes or 300 seconds. Now, the displacement is the product of time and velocity.
ds = velocity × time
= 300 s × 5 m/s
= 1500 m.
Thus the work done = F × ds
= 4 × 10³ N × 1500 m
= 6 ×10⁶ J .
If the velocity is reduced to half 2.5 m/s , then work done will be reduced to half as 3 ×10⁶ J.
Power is the rate of work done. Thus it is the ratio of work done to time. The power exerted on the car in 5 minutes = 6 ×10⁶ J /300s
= 20000 J/s
Hence, the power exerted on the cable car in 5 minutes is 20000 J/s.
To find more on work done, refer here:
https://brainly.com/question/3902440
#SPJ3
I NEED THIS BY TODAY DDD:
Answer:
I can't see the picture, can you right down the same thing that is the picture in the comments so I can help you.
Explanation:
Thx.
find the impulse of a 20.0 KG object accelerates to8.1 M/S from 2.3 M/S
Answer:
116 N•s
Explanation:
change in momentum = mvf-mvi
= m(Vf - Vi)
= 20( 8.1-2.3)
change in momentum= 116 kg•m/s
: .impulse is 116 N•s
c. How can you explain natural selection in evolution of insects from the time they evolved till our days now?
the definition of convetion
how fast should a girl 35kg Run so that her kinetic energy becomes 700 J?
What is one effect of the uneven heating of Earth caused by the Sun?
options:
Rotation of Earth
Generation of wind
Oceans losing salt
Plants failing to grow
Answer:
The uneven heating results in some of the atmosphere to be warmer than other parts and changes in volume and pressure which result in updrafts and can cause thunderstorms and other violent weather.
Explanation:
Generation of wind
discrete packets of kinetic energy in light are called
Answer:
Photons
Explanation:
I just know
Discrete packets of kinetic energy in light are called photons. Photons are fundamental particles of light and electromagnetic radiation. The correct answer is photons.
Photons are fundamental particles of light and electromagnetic radiation. They carry energy in discrete quantities, known as quanta or packets, and exhibit both wave-like and particle-like properties.
The energy of a photon is directly proportional to its frequency, and inversely proportional to its wavelength. When light interacts with matter, it can transfer its energy to the particles it interacts with, leading to various phenomena such as absorption, reflection, and emission.
Therefore, Discrete packets of kinetic energy in light are called photons.
To know more about the photon:
https://brainly.com/question/34096290
#SPJ6
What is benford's law.
Answer:
Known variously as the Newcomb–Benford law, the law of anomalous numbers, or the first-digit law, Benford's Law is the observation that the first digit in many real-world collections of numerical data will be tiny, as shown by the example of the first-digit law.
Explanation:
Hope it helps:)
If anyone knows please anwser
Answer:
C.
Explanation:
Answer:
c. Radio and T.V. signals
1. A race car accelerated from rest to 34.7 m/s by the time it crossed the finish line. The race car moved in a straight line and traveled from the starting line to the finish line in 7.81 seconds. What was the acceleration of the race car?
Answer: 4.44302176697 m/s^2
Explanation:
formula for acceleration is (final velocity - initial velocity)/time. So in your case:
(34.7m/s - 0m/s)/ 7.81s = 4.44302176697 m/s^2
If an automobile slows from 26 m/s to 18 m/s in a period of 4.0 s, what was the average acceleration?
Answer: -2m/s²
Explanation:
Each second, the acceleration decreases of 2m/s²
N.B.: in physics, deceleration is also acceleration.
A mass 25kg is attached to a spring which is held stretched a distance 120 cm by a force F=300N (Fig. 7-28), and then released. The spring compresses, pulling the mass. Assuming there is no friction, determine the speed of the mass m when the spring returns: (a) to its normal length (x = 0). (b)find the spring constant k?
Explanation:
Spring is stretched by force f to distance
"X"
now here by force balance we can say
f = kx
k = !
now here we will we say that energy stored in the spring will convert into kinetic energy
kx² = mv²
(x² = mv²
now solving above equation we will have
PART 2)
now for half of the extension again we can use energy conservation
ka²-k(x/2)² = 1 {mv²
¾fx=mv²
now the speed is given as
3 fr 4m V=