Answer:
ionic bond
Explanation:
cation calcium looses 2 electrons to bond with two iodine atoms to form CaI2 (Calcium Iodide)
Identify and describe the processes that change rock below Earth's surface.
Answer:
crystallization, metamorphism, and erosion and sedimentation.
~+lil more info+~
The three processes that change one rock to another are crystallization, metamorphism, and erosion and sedimentation. Any rock can transform into any other rock by passing through one or more of these processes. This creates the rock cycle.
When calculating the amount of product formed during alcohol fermentation, one mole of ethanol is chemically equivalent to what volume of CO2 (g) measured at 1 atm and 273 K
Answer:
44.8 dm^3
Explanation:
The equation for the fermentation of glucose is;
C6H12O6 -----> 2C2H5OH + 2CO2
This means that two moles of ethanol carbon dioxide are produced.
If 1 mole of gas at STP occupies 22.4 dm^3, then two moles occupies; 22.4 dm^3 × 3 = 44.8 dm^3
Jane believe that plate tectonics is a theory, and Mario believes it is a law. Which of the following best support Jane's argument?
Answer:
A
Explanation:
i did this and its right
There is a mixture of three gases. We know the total pressure is 2.50 atmosphere and the pressure of the oxygen and the nitrogen in the mixture are 0.52 atmosphere and 0.84 atmosphere. The jar containing the gases has a volume of 25.0 liters and is at a temperature of 32 degrees Celsius. What are the pressure and the number of moles of carbon dioxide in the container?
Answer:
1.14 atm and 1.139 mol
Explanation:
The total pressure of the container is equal to the sum of the partial pressure of the three gasses:
P = Poxygen + Pnitrogen + Pcarbon dioxide2.50 atm = 0.52 + 0.84 + Pcarbon dioxideNow we solve for the pressure of carbon dioxide:
Pcarbon dioxide = 1.14 atmTo calculate the number of CO₂ moles we use PV=nRT:
P = 1.14 atmV = 25.0 Ln = ?R = 0.082 atm·L·mol⁻¹·K⁻¹T = 32 °C ⇒ 32 + 273.16 = 305.16 K1.14 atm * 25.0 L = n * 0.082 atm·L·mol⁻¹·K⁻¹ * 305.16 K
n = 1.139 molWhat is an acid in Science
Answer :An acid is any hydrogen containing substance
Explanation: i hope it helps i got a little help from a friend
Jase mixed 2 liquids together and to his amazement, he saw that a solid had formed! What is this solid known as?
(will give brainliest)
Answer:
......
Explanation:
Which covalent bond is the most polar?
a) S-O
b) C=0
c) Se-F
d) H-O
e) O=O
How many moles in 435 liters of Krypton gas at STP?
19.4 mol Kr
General Formulas and Concepts:Chemistry
Stoichiometry
Using Dimensional AnalysisGas Laws
STP (Standard Conditions for Temperature and Pressure) = 22.4 L per mole at 1 atm, 273 KMath
Pre-Algebra
Order of Operations: BPEMDAS
Brackets Parenthesis Exponents Multiplication Division Addition Subtraction Left to Right Explanation:Step 1: Define
435 L Kr at STP
Step 2: Identify Conversions
[STP] 22.4 L = 1 mol
Step 3: Convert
[tex]435 \ L \ Kr(\frac{1 \ mol \ Kr}{22.4 \ L \ Kr} )[/tex] = 19.4196 mol Kr
Step 4: Check
We are given 3 sig figs. Follow sig fig rules and round.
19.4196 mol Kr ≈ 19.4 mol Kr
Plants give off oxygen as part of photosynthesis. Explain the impact of this process on humans?
Answer:
i think it haven't impact because oxygen is very sensitive for our life and from plants there is so many kinds of food sources soo
chemical formula of magnesium
oxide using Criss cross method
Answer:
Crisscross method is simply writing the charges crossly near each element. Since oxidation number of Mg (metal) is +2 and oxygen (nonmetal) is -2, if we cross them and write next to each; we get Mg2O2 .
Which of these electron configurations is not possible?
Answer:
D
Explanation:
Electrons are being filled according to the increasing other of their sublevel energy
What is the main motivation for Hindus to follow the beliefs of their religion correctly?
Answer:
B
Explanation:
Answer:
b
Explanation:
Living Things and Energy
1. Identify one reason why all plants need energy.
A. to produce new cells and structures
* B. to absorb sunlight
C. to absorb oxygen
D. to release carbon dioxide
Try Again
Need help!!! Don’t understand
If 4.2 g of water is actually produced, what is the percent yield?
Answer:
23.33%
Explanation:
from
percent yield=(mass÷total mass )×100%
Which of the following is an example of a chemical reaction?
Answer:
where is the option I can't see plz give the option first the I try to give answer
what is diatomic element?
Answer:
it is molecular of an elements that consists two atoms
b. How do metals and non-metals differ chemically?
1
Need help fast!!!!!!!!!!!
PLEASE HELP ME!!
Which shows three human body parts in order from the simplest level of organization to the most complex?
A. red blood cell → nervous system → bone tissue
B. nervous system → bone tissue → red blood cell
C. red blood cell → heart tissue → circulatory system
D. bone tissue → red blood cell → nervous system
Answer:
C
Explanation:
C. red blood cell → heart tissue → circulatory system
the order of organisation is
cell --> tissue --> organ --> organ system --> organism
hope this hepls x
branilest plz?
Answer:
C is the answer
the red blood cell are a part of the heart tissue which makes up the circulatory system
Which of the following scenarios would not prompt the cell to start dividing
Answer:
what r the options??????
which is equal to a tempature of 20 c. 20 F. 68F. 36F. 32F
Answer:
68F
Explanation:
In a molecule of calcium sulfide, calcium has two valence electron bonds, and a sulfur atom has six valence electrons. How many lone pairs of electrons are present in the Lewis structure of calcium sulfide?
A. one
B. two
C. three
D. four
E. none
Also, state why.
There are none
Further explanationGiven
a molecule of calcium sulfide
two valence electron of Calcium(Ca)
six valence electrons of Sulfur(S)
Required
number of lone pairs of electrons
Solution
Lewis structure shows the form of bonds that occur in the valence electrons of an element or compound
Valence electrons are electrons used in a chemical bond
To achieve stability, the element S needs 2 more electrons which are obtained from 2 electrons from the Ca element,
A lone pair electron means refers to an unshared pair of electrons(not bonding to the other atoms)
This condition usually occurs in covalent bonds
As we know, the bond between Ca, which is a group 2 (metal) with Sulfur in group 16, is an ionic bond because it occurs between metal and non-metal ions, so there is no sharing of electrons, but there is a release of electrons from Ca ions to S ions to form an octet. , so all the valence electrons in S are paired
As the sun sets, the temperature of the room decreases. Explain how this affects the particle motion of the gas particles in the room. Be sure to include collisions, kinetic energy, pressure, and thermal energy in your answer.
Answer:
Heres a very LONG answer-
The real answer:
Its in the kinetic-molecular theory, the temperature of a substance is related to the average kinetic energy of the particles of that substance. When a substance is heated, some of the absorbed energy is stored within the particles, while some of the energy increases the motion of the particles.
Why water in considered as compound?
Answer with Explanation:
Water is a compound because it consists of two types of atoms (Hydrogen and Oxygen) that are chemically bonded. An "element" only consists of one type of atom, therefore, water is not an element but a compound. Its chemical formula is: [tex]H_{2} O[/tex]. This means that water consists of 2 atoms of Hydrogen that are bonded to an atom of Oxygen. Take note that a compound is different compared to the elements that it is made of. For example, water is essentially liquid in its form but it is different from the atoms of Hydrogen and Oxygen, which are gas in form.
Answer:
Water is a compound. It contains more than one element: hydrogen and oxygen atoms are joined together; as illustrated in the video clip Elements and Compounds, above. ... Water is not simply a mixture of hydrogen and oxygen; it contains hydrogen and oxygen atoms linked together in an ordered way.
How do the force factors compare to the products of the masses?
Answer:
The force factors are equal to the first numbers of the products of the masses in scientific notation.
Explanation:
Ex. 1.0 x 10^5 kg^2 then the force factor would be 1.
ex. 3.0 x 10^12 kg^2 then the force factor would be 3.
To solve this we must be knowing each and every concept related to scientific notation and its calculations. Therefore, in scientific notation, the force factors seem to be equivalent to the first digits of the masses' products.
What is scientific notation?Mathematics is a way of representing numbers using a decimal number ranging from one to 10, but not 10 multiplied by a factor of 10. The most common type of mathematical notation is All numbers in scientific notation are expressed in the generic form N 10m.
In scientific notation, the force factors seem to be equivalent to the first digits of the masses' products.
Example1 1.0 x 10⁵ kg² , force factor is 1.
Example2 3.0 x 10¹² kg² ,force factor is 3.
Therefore, in scientific notation, the force factors seem to be equivalent to the first digits of the masses' products.
To learn more about scientific notation, here:
https://brainly.com/question/18073768
#SPJ2
Which waves carries the most energy?
HURRY PLZZ!!!!
I NEED HELP FAST!!!
GOD BLESS!!!
THE SUBJECT IS SCIENCE I CAN´T FIND IT!!!!!!!!!!!
Answer: D Because it is moving at a fast pace
Explanation:
What are 1a 3b and 7a explains on the periodic cable
Answer:
Explanation:
1a=group 1 elements(H,Li,Na,K....)
3b=group 3 elements (Sc,Y,La....)
7a=group 17 elements (F,Cl,Br,I....)
in terms of their electron configurations, why is cesium more likely to lose its valence electron than potassium?
use the term “shielding” in your response if possible
Explanation:
use the term electron sheilding, the more electrons between the valence el3ctron and nucleus the easier to lose the valence electron (more sheilding = easier to lose)
Subject: Chemistry
whoever does this right will give the brainliest <3)
Answer:
1 A
3 main types of bond are
Ionic bond ( formed due to complete transfer of electron between atoms(
Covalent bond ( formed by mutual sharing of electron)
Metalic bond ( present in the metals due to mobile electrons)
1 B bond in CaO is ionic bond formation in attached image
1 C hydrogen bond with nitrogen is covelent NH3 ammonia is formed because a bond between two non metals is expected to be covalent
More their electronegativity difference between hydrogen and nitrogen is less than 1.7 that makes it covalent
Explanation:
Answer: This looks tough
Explanation: