Answer:
B
Explanation:
One object speeds up before it slows to a stop.
When reading this type of graph, we know that when the points are far apart, then the object is definitely moving quickly. Also again, we know that when the points are besides each other, then we say that the object is moving slow. When the distance that is between the points are changed, the velocity of the object subsequently changes too, and therefore, we say that the object is accelerated. When there are lots of points in one location, we will see that the object is not moving.
This then translates into that
The object(s) at the top begins to slow, eventually, it increases in its speed, going forward, it slows down again, before it finally halts. The object at the bottom on the other hand, starts fast, before slowing down.
then:
"One object speeds up before it slows to a stop "
PHYSICS HELP PLEASE ONE QUESTION 10 POINTS:)
Case 1 has the greatest strength for the push and pull. Option A is correct.
What is force?The pushes and pulls the body experiences are referred to as force. It can occasionally be used to alter the body's size, shape, and direction.
Mass times acceleration equals force, according to the definition. Newton is its measure.
The force transmitted through a rope, string, or wire as it is tugged by opposing forces is referred to as the tension force.
Energy is drawn equally from both ends by the tension force, which is exerted along the whole length of the wire.
The tension force is acting in the rope causing greater strength for the push and pull.
Hence, option A ia correct.
To learn more about the force refer to the link;
https://brainly.com/question/26115859
#SPJ1
What does hydrosphere and cryosphere both have in common?
Answer:
cryosphere is all those areas of earth where the surface is frozen while hydrosphere is all waters of earth, as distinguished from the land and the gasses of the atmosphere
The upward force on a car that is falling off a cliff is what?
a. air resistance
b. momentum
c. inertia
d. terminal velocity
Answer:
A. air resistance
Explanation:
I think so
What is the velocity of a plane that took 2 hours to travel 1000 miles north?
A. 500 miles per hour North
B. 500 miles
C. 500 miles North
D. 500 miles per hour
all known frequencies of the visible spectrum are..
a. solar light
b. light
c. black light
Explanation:
[tex]b. \: light[/tex]
write any three rules two keep in in mind while using SI units
Answer:
Rules and conventions for writing SI units and their symbols
The units named after scientists are not written with a capital initial letter. ...
The symbols of the units named after scientist should be written by a capital letter. ...
Small letters are used as symbols for units not derived from a proper name
Explanation:
Hope this helps u
Crown me as brainliest:)
Answer:
when temperature is expressed in Kelvin,the degree sign is omitted.
only accepted symbols should be used.
some space is always to be left between the number and the symbol of the unit and also between the symbols for compound units such as force,momentum, etc.
a spring balance used to weigh candy is built with a spring the spring stretches 3.00 cm when a 15 n weight is placed in the pan. when the weight is replaced with 3 kg of candy, what distance will the spring stretch?
a.7.0 b.4.5 c.3.8 d.5.9
Answer: 5.9cm
Explanation:
15N/3cm=5
Convert 3kg to N (29.42N)
Use the 5 from earlier to divide 29.42/5=5.884
Round to 5.9
5.9cm is the answer
(I don’t know if I solved this the correct way but I got it right. 5.9 is the correct answer)
The part of a flower which holds the egg cells is the:
ovary
style
stamen
anther
Answer:
Maybe pistil or ovary
pistil usually is located in the center of the flower and is made up of three parts: the stigma, style, and ovary
Answer:
A. Ovary
Explanation:
If you force the magnitude of the vector to stay the same, but increase the vertical component value, what happens to the horizontal component of the vector?
Answer:
The horizontal component reduces
Explanation:
The magnitude of a vector is found by taking the root of the sum of the squares of the components of the vector
Therefore, when the values of one of the components is increased, while the other components of the vector stay the same, the magnitude of the vector increases
In order to increase the value of one of the components of a vector and maintain the magnitude of the vector, the values of one or more of the other components must be reduced.
As such when the magnitude of the vector that has only a vertical and a horizontal component is forced to stay the same, and the vertical component is increased, the horizontal component must be reduced.
The increase in vertical component of the vector, causes a decrease in the horizontal component of the vector.
A vector can be represented in vertical and horizontal components.
[tex]V = V_x + V_y[/tex]
where;
[tex]V_x[/tex] is the horizontal component of the vector[tex]V_y[/tex] is the vertical component of the vector[tex]V = Vsin(\theta) \ + Vcos(90-\theta)[/tex]
From the formula above, as one component vector increases, the other component reduces.
Thus, the increase in vertical component of the vector, causes a decrease in the horizontal component of the vector.
Learn more here:https://brainly.com/question/16491056
A ball is thrown horizontally from a 11 m high building with a speed of 9.0 m/s.
How far from the base of the building does the ball hit the ground?
Express the answer using two significant figures.
Answer:
the answer to you're question is d=9
what are 3 sources of heat inside earth?
1. Heat from when Earth was formed.
2. Frictional Heat, which is caused by heavier core material sinking to the center of the Earth.
3. Heat from the decay of elements that are radioactive.
How do you find the surface area of a rectangular object?
Answer:
A=2(wl+hl+hw)
Explanation:
Hope this helps! :)
Which of the following offers guidance to individuals in various situations of conflict, confusion and crisis by means of providing tools necessary for self-development?
Answer:
confusion
Explanation:
mark as brainlist plz
how long would it take for a car to travel 200 km if it has an average speed of 55 km/hr?
Answer:
3.6
Explanation:
Answer:
3.64 hrs
Explanation:
An air bubble is at a depth of 3 m below
the surface of lake. What is the pressure
of water on the air bubble?
(take density of water = 1000 kgm )
Answer:
incorrect its 987 for exact
HEY CAN ANYONE PLS ANSWER DIS!!!!!!!
Answer:
A. Filtration
Explanation:
Chromatography can not be used to seperate A(l) from the mixture. And you can not even perform the method since B(s) is present.
As for distillation, this process is used to seperate liquid from mixture of liquids. Filtration is effective in seperation of liquid and solid.
Mr. Chang's class participated in a science experiment where they placed three substances outside in the sunlight to determine which substance would increase in temperature more quickly. How would the motion of the particles of each substance be described if they are allowed to sit in the Sun for a duration of 10 minutes?
Choices:
The particles do not change in motion because the substances are undisturbed.
The particles of each substance begin to speed up and move farther apart as the temperature increases.
The particles of each substance begin to slow down and move closer together as the temperature increases.
The particles of each substance speed up and slow down simultaneously, but remain in a fixed position as the temperature increases
Answer:
B or D but im pretty sure it is D
Explanation:
When molecules are left in the sun, it heats up. When molecules heat up, the begin to vibrate rapidly. The sun is not constant as it could get blocked by clouds, so it would, at times, slow down the movement of the molecules. The answer is most likely D.
If a rock is skipped into a lake at 24 m/s2 with what force as the rock
thrown if it was '1,75 kg?
Answer:
Force = Mass * Acceleration
Explanation:
24*1.74= 42 N
When your blood pressure is low, choose a choice below that explains what occurs.
A. The nervous system signals smooth muscles in the blood vessels to relax to decrease blood pressure.
B. The nervous signals smooth muscles in the blood vessels to relax to increase blood pressure.
C. The nervous system signals smooth muscles to contract to decrease blood pressure.
D. The nervous system signals smooth muscles in the blood vessels to contract to increase blood pressure
Answer:
The correct option is;
D. The nervous system signals smooth muscles in the blood vessels to contract to increase blood pressure
Explanation:
The contraction or relaxation of the vascular smooth muscles lead to the blood vessel volume change and blood pressure change such that the blood is redirected to regions of the body that requires instantaneous increased oxygen intake. As such the nervous system signals the blood vessel's vascular smooth muscle to contract, through vasoconstriction so as to raise the blood pressure, when the blood pressure is low.
Which answer explains why plate B is moving underneath plate A
A. Plate B is more dense than plate A because it is composed of oceanic crust
B. Plate A is more dense than plate B because it is composed of oceanic crust
C. plate B is more dense than plate A because it is composed of continental crust
D. Plate A is more dense than plate B because it is composed of continental crust
Answer:
A.
Explanation:
Earth is composed of different layers and one layer moves over another due to differences in the densities.
According to the physics of density, a substance having less density floats over a higher density substance. The oceanic crust has more density than the continental crust that is why continental crust float over oceanic crust.
So in the given example, plate B is moving below the plate A, it means plate B is more dense than plate A because plate B is composed of oceanic crust . For example : continents float over the asthenosphere (a layer below the lithosphere).
Hence, the correct answer is "A ".
Which unit you would use to measure the following objects? This is so confusing
Answer:
weight of truck in kg, height of person in meter m, amount of water in kiloliter kl, length of eyelash in mm
Can someone help me please, thanks.
Answer:
rotation
Explanation:
Im pretty sure. Please heart and mark brainliest
Answer:
cycle
Explanation:
either rotation or cycle. I would think.
An object that has 0 acceleration will never be in motion
Answer:
False
Explanation:
If an object has two forces acting on it, how can the net force equal 0?
Answer:
Check explanation.
Explanation:
Net force is essentially the sum of the forces enacting upon an object. One example of net force is gravity and normal force. It is commonly accepted that every object has a force acting upon it, even if it is stationary. To give an example, the weight of an object has a force upon the earth but the earth pushes back, essentially meaning that the object will not sink.
if your mass is 72kg your textbooks in Madison has 3.7 kg and you and your textbook are separated by a distance of 0.33 M what is the gravitational force between you and your textbook
Answer:
1.63 X 10^-7N
Explanation:
What are the two parts of an atom? the nucleus and the proton coud the neutron and the electron the neutron and the proton cloud the nucleus and the second 00
Answer: The Nucleus and the Electrons are the 2 Parts of the atom.
Explanation:
What collides and creates a movement of heat called conduction?
A. photons
B. compounds
C. Molecules
D. atoms
Answer:
c.
Explanation:
Molecules collide and create a movement of heat called conduction.
What is conduction?
Conduction is defined as a process as a means of which heat is transferred from the hotter end of the body to it's cooler end.Heat flows spontaneously from a body which is hot to a body which is cold.
In the process of conduction,heat flow is within the body and through itself.In solids the conduction of heat is due to the vibrations and collisions of molecules while in liquids and gases it is due to the random motion of the molecules ,
When conduction takes place, heat is usually transferred from one molecule to another as they are in direct contact with each other.There are 2 types of conduction:1) steady state conduction 2) transient conduction.According to the type of energy conduction is of three types:
1) heat conduction
2) electrical conduction
3)sound conduction
Learn more about conduction,here:
https://brainly.com/question/21496559
#SPJ2
What layer of atmosphere does planes fly?
Answer: stratosphere
The stratosphere is the second to last layer of atmosphere to the Earth. It is about 40,000 feet above, and this is the range where planes fly. So, the answer is stratosphere.
Hope this helps!
Answer:
stratosphere
Explanation:
Planes fly in the stratosphere of the atmosphere.
The answer to the question is stratosphere.
Okay? Thank you so much for 25 points.
The convection currents in the asthenosphere cause the movement of the
A gust of wind blows an apple from a tree. As the apple falls, the force of gravity on the apple is 9.11 N downward, and the force of the wind on the apple is 1.18 N to the right. What is the magnitude of the net external force on the apple? Answer in units of N. Part 2: What is the direction of the net external force on the apple (measured from the downward vertical, so that the angle to the right of downward is positive)? Answer in units of ◦
Answer:
The net external force on the apple is 9.18 N and the direction of net force is 82.6°.
Explanation:
Given that,
Force of gravity = 9.11 N
Force of wind = 1.18 N
We need to calculate the net external force on the apple
Using formula of net force
[tex]F'=\sqrt{(9.11)^2+(1.18)^2+2\times1.18\times9.11\cos90}[/tex]
[tex]F'=9.18\ N[/tex]
We need to calculate the direction of net force
Using formula of direction
[tex]\theta=\tan^{-1}(\dfrac{9.11}{1.18})[/tex]
[tex]\theta=82.6^{\circ}[/tex]
Hence, The net external force on the apple is 9.18 N and the direction of net force is 82.6°.
The magnitude of the net external force on the apple is 9.19 N and the direction of the net external force is 82.6⁰.
The given parameters;
weight of the apple, W = 9.11 Nhorizontal force on the apple, F = 1.18 NThe magnitude of the net external force on the apple is calculated as follows;
[tex]F= \sqrt{F_y^2 + F_x^2} \\\\F= \sqrt{9.11^2 + 1.18^2} \\\\F = 9.19 \ N[/tex]
The direction of the net external force on the apple is calculated as follows;
[tex]\theta = tan^{-1}(\frac{F_y}{F_x} )\\\\\theta = tan^{-1}(\frac{9.11}{1.18} )\\\\\theta = 82.6 \ ^0[/tex]
Thus, the magnitude of the net external force on the apple is 9.19 N and the direction of the net external force is 82.6⁰.
Learn more here:https://brainly.com/question/816252