Which rule states that cracks on glass tend to form at a certain angle on the opposite side of the polnt of Impact?
The
rule states that cracks tend to form at a (n)
angle on the opposite side from the point of Impact.

Answer:

See explanation below

Explanation:

First, let's write the reaction:

NH₄SH(s)   <------> H₂S(g) + NH₃(g)

The reaction is already balanced so we don't need to do anything else.

Second, let's take into account the following. The Kc expression for this reaction, only compounds in gaseous state are the only ones that contribute to the equilibrium. Solid and liquid do not contribute to the Kc expression. This is because solid and liquid have a constant concentration near to 1, so, it won't do any difference.

Knowing this, the Kc expression for this reaction is:

Kc = [H₂S] [NH₃]

Now, to calculate Kp from Kc, there's an expression that helps a lot to do this. The expression is the following:

Kp = Kc (RT)ᵃⁿ    (1)

Where:

R: universal constant of gases

T: Temperature in K

ᵃⁿ = difference of the coefficients of the reaction.

This expression comes from the fact that Kp is an expression that instead of working with concentrations, it works with pressure.

If we use the ideal gas equation we have:

PV = nRT

Solving for P:

P = nRT/V        and C = n/V   so

P = CRT

If we now replace this, in the Kp expression of equilibrium we have:

Kp = pH₂S * pNH₃

Kp = ([H₂S]RT)¹ ([NH₃]RT)¹

Kp = (RT)¹⁺¹ ([H₂S] [NH₃])

Kp = (RT)²Kc

So finally the expression for Kp would be:

Hope this helps

Answer:

See below

Explanation:

First, you need to know what a significant figure means.

The significant figures in a measurement consist of all the certain digits in one measurement, including one uncertain or estimated digit.

With that being said, the second thing we need to do is to correct the exercise. According to an external source, the exercise is the following:

a) x = 17.2 + 65.18 - 2.4

In this case, we can say that 17.2 and 2.4 has the uncertain digit at the end, but in 65.18 it's the 8. Therefore, when we make the sum of all of this we have:

x = 17.2 + 65.18 - 2.4 = 79.98

The last digit is the uncertain digit, therefore, we won't include this digit. So the final result would have 3 significant figure. However 8 surpass 5, and hence, we should approximate our result. Then our final result is:

x = 80.0

b) x = 13.0217 / 17.10

The last digit of the 13, is the uncertain. So, doing this:

x = 13.0217 / 17.10 = 0.761502924

With the correct significant figure, this would be only 4 so:

x = 0.7615

c) x = (0.0061020)*(2.0092)*(1200.00)

Applying the same principle as before:

x = (0.0061020)*(2.0092)*(1200.00) = 14.712

Hope it helps

Answer:

1.6 °C.kg/mol

Explanation:

Step 1: Calculate the molality of urea

We will use the following expression.

m = mass(urea) / molar mass(urea) × kg solvent

m = 24.6 g / 60.06 g/mol × 0.650 kg

m = 0.630 mol/kg

Step 2: Calculate the boiling point elevation of X

The boiling point elevation is a colligative property that can be calculated using the following expression.

ΔTb = 124.3 °C - 123.3 °C = 1.0 °C

Step 3: Calculate the boiling point elevation constant

We will use the following expression.

ΔTb = Kb × m

Kb = ΔTb/m

Kb = 1.0 °C/(0.630 mol/kg) = 1.6 °C.kg/mol

Answer:

0.05M is the concentration of the phosphate buffer

Explanation:

A buffer is defined as the aqueous mixture of a weak acid (KH₂PO₄) and its conjugate base (K₂HPO₄). The concentration of this buffer is the sum of the concentrations of the weak acid and the conjugate base, that is:

Concentration of phosphate buffer = 0.02M + 0.03M

=

Answer:

11

Explanation:

From the question given above, the following data were obtained:

Electronic configuration => 1s²2s²2p⁶3s¹

Number of electrons =?

We must understand that the electronic configuration of an element is written based the number of electrons present in the atom of the element.

To obtain the number of electrons in the atom given in the question above, we simply add up the electrons in each orbital. This can be obtained as follow:

Electronic configuration => 1s²2s²2p⁶3s¹

Number of electrons =?

Number of electrons = 2 + 2 + 6 + 1

Number of electrons = 11

Thus , the number of electrons in the atom is 11

Answer:

bro

Explanation:

guhfuyfouyvyu

Answer:

9.00

Explanation:

I took the test and got it correct ...

Answer:

Different objects appear to be different colors, because we see color by light bouncing off an object and reflecting or transmitting into our eye. The amount of light that reflects or transmits into our eye depend on the color that we will see.

Answer:

the answer is asteroids!

Explanation:

Answer:

astroid

Explanation:

becaus

Answer:

What volume of water is produced when the CO2 reacts with the excess LiOH

X = 360 mL H2O

Explanation:

CO2 (g)       + 2 LiOH(s) ⇒ Li2CO3  (aq) + H2O(l)

20.0 mol        excess                                   x g

X = 360 mL H2O

x mL H20 = 20.0 mol CO2  (1 mol H2O /1 mol CO2)(18 g H2O/1 mol H2O)

(1 mL H2O /1 g H2O)

X = 360 mL H2O

Answer:

Kindly check the picture attachment.

Explanation:

H2CO3 --------------------------> H2O + CO2

The reaction above is a decomposition reaction showing how the carbonic acid that is H2CO3 decomposed into H2O and CO2. The study of how reactants react(that is the amount in which they react) in order to form a product (and the amount of product formed) is known as the stoichiometry.

H2CO3 which is the reactant has three oxygen atoms which are all directly bonded to the carbon atom. One of the oxygen atom is bonded doubly to the carbon atom.

CO2 and H2O are the products. The CO2 is linear, O=C=O with the two oxygen atoms bonded doubly each to each carbon atoms. The H2O is bent.

Answer:

80g/mol is the molar mass of the metal

Explanation:

A divalent metal M reacts with HCl as follows:

M + 2HCl → MCl₂ + H₂

The excess of HCl is titrated with NaOH. Thus, we can solve the moles of HCl that reacts with the metal and the moles of the metal. As the atomic weight is the ratio between the mass and moles of the atom:

Moles NaOH:

0.0546L * (0.22mol / L) = 0.0120 moles NaOH = Moles HCl in excess

For NaOH and HCl solutions, Normality is the same than molarity.

Moles HCl added:

0.100L * (1.28mol / L) = 0.128 moles HCl * (50mL / 200mL) = 0.032 moles

Moles HCl in that react:

0.032 moles - 0.012 moles = 0.020 moles HCl

Moles M:

0.020 moles HCl * (1mol M / 2 mol HCl) = 0.010 moles M

Molar mass M:

0.8g / 0.010mol =

Answer:

17.5 L

Explanation:

Step 1: Given data

Step 2: Calculate the final volume of the nitrogen

We have a gas that undergoes a change at a constant temperature. If we assume an ideal behavior, we can calculate the final volume of the nitrogen using  Boyle's law.

P₁ × V₁ = P₂ × V₂

V₂ = P₁ × V₁/P₂

V₂ = 1 atm × 14.0 L/0.8 atm = 17.5 L

Answer:

See explanation

Explanation:

Weathering refers to the breakdown of rocks to form soil. There are several agents of weathering.

In warmer regions, there are more vegetation and microorganisms and they increase the rate of biological weathering.

Since weathering leads to the formation of soil and the rate of weathering is greater in warmer climates, it also follows that as temperature increases and more soil is formed, erosion will happen faster at this higher temperature owing to the presence of more soil compared to colder climates.

There is a huge and direct effect of temperature on the rates of erosion.

The highest rate of weathering occurs in warm and wet climate because in warm and wet climatic regions, more rainfall occurs which increase the rate of weathering. Rainfall and temperature can affect the rate in which rock weathering occurs.

High temperatures and greater rainfall increase the rate of chemical weathering. Rocks in tropical regions exposed to abundant rainfall so we can conclude that hot temperatures weather much faster than similar rocks residing in cold, dry regions.

Learn more: https://brainly.com/question/20929061

Answer:

4C₈H₄OH +  35O₂  →  32CO₂   +   10H₂O  

Explanation:

The unbalanced reaction expression is given as:

         C₈H₄OH +  O₂  →  CO₂   +   H₂O  

To solve this problem, we use a mathematical approach.

     aC₈H₄OH +  bO₂  →  cCO₂   +   dH₂O

Conserving C: 8a  = c

                    H:  5a  = 2d

                    O: a + 2b  = 2c + d

Let a  = 1, c  = 8, d  = [tex]\frac{5}{2}[/tex]  , b  = 35

   4C₈H₄OH +  35O₂  →  32CO₂   +   10H₂O  

Answer:

25.33 grams of water are produced.

Explanation:

15 g H / 1.00784* = 14.8833 moles H

7.5 g O / 15.999** = 0.468779 moles O

Ratio of Hydrogen to Oxygen in Water: 2 : 1

Oxygen: 0.468779 moles

Hydrogen (calculated based on oxygen): 0.468779 * 2 = 0.937558 moles

Water: 0.468779 + 0.937558 = 1.406337 moles

Grams of water produced:

1.406337 mol * (water molar mass)

= 1.406337 mol * [2(1.00784) + 1(15.999)]

= 1.406337 mol * (18.01468***)

= 25.3347110272 g water

Notes:

*molar mass of hydrogen

**molar mass of oxygen

***molar mass of water is actually 18.01528, so the calculation of 18.01468 is close enough

-------------------------------- Summary --------------------------------

Convert hydrogen and oxygen to moles.

Determine number of moles of water using: 2 mole hydrogen + 1 mole oxygen = 1 mole water

Convert water moles to grams.

Answer: Photosynthesis uses carbon dioxide, while cellular respiration produces carbon dioxide.

Explanation: i took the test lol

Answer:

Because sugar has no ions in the solution

Explanation:

Pure water contains very few ions, so it does not conduct electricity very well. When table salt is dissolved in water, the solution conducts very well, because the solution contains ions. When sugar is dissolved in water, the solution does not conduct electricity, because there are no ions in the solution.

In basic words the more ions in the solution there is a better chance to conduct electricity.

Answer:

No

Explanation:

This does not mean that vinegar is insoluble totally. In fact, vinegar is soluble in water because water is a polar solvent.

For a substance to be soluble in another, it must obey the rule of solubility.

The rule states that "like dissolves like"

It implies that polar solvent will only dissolve polar solute.

Also, non-polar solvent will only dissolve non-polar solute.

Therefore, the answer is no, vinegar will dissolve in water.

Answer: not 100% but maybe Visable Light...sorry if thats wrong

Explanation:

Thermal energy is the another name for infrared energy.

Infrared radiation is a type of radiant energy that is  not visible to human eyes but we can feel as heat energy.

Infrared radiation (IR), also known as thermal radiation. It is that band of energy in the electromagnetic radiation spectrum with wavelengths between 780 nm and 1 mm so we can conclude that thermal energy is the another name for infrared energy.

Learn more about radiation here: https://brainly.com/question/24524460

Answer:

i am so sorry

Explanation:

The density of copper is  If a sample 8.933 g/cm3. If copper has a volume of 12.993 cm^3. Then the mass will be 136.29 gram.

Density is defined as the mass per unit volume it means that mass present in 1 meter cube is called density. The S.I unit of density is kg/m^3 and in C.G.S it is gram/cm^3

So, In above question can understand that density, mass, and volume all are convert to each other it means that if we know any two variable then third one will be calculated easily.

Mathematically,

Formula for density will be as mentioned below:-

Density = Mass/Volume.

From above formula we can calculate mass which is as follows:-

Mass = Volume × Density.

S.I unit of mass is kilograms and C.G.S unit is gram.

So In above question

Density = 8.933 gram/cm^3

Volume = 12.993 cm^3

So from above formula

Mass = Density × volume

          = 10.49 × 12.993

          = 136.29 gram

          = 0.13629 kilogram

So Mass is equal to 136.29 gram or 0.136 kilograms.

Therefore,The density of copper is  If a sample 8.933 g/cm3. If copper has a volume of 12.993 cm^3. Then the mass will be 136.29 gram.

Learn more about density here:

https://brainly.com/question/15164682

#SPJ2

Answer:

Atoms with a positive charge will be attracted to negatively charged atoms to form a molecule. This bonding between atoms is the key to how molecules interact with each other. ... Other molecules interact with water, combining with the atoms to create new soluble liquids.

Answer:

See explanation

Explanation:

The valence electrons are electrons found on the valence (outermost) shell of an atom.

When an atoms form compounds, there is an exchange of valence electrons between the atoms of one element and the atoms of another element.

Let us consider a typical example, sodium has one valence electron and chlorine has seven valence electrons. This means that chlorine needs one electron to complete its octet while sodium needs to release one electron in order to attain the octet structure.

So, sodium gives out its one electron and becomes a stable sodium ion and chlorine accepts that electron and becomes a stable chloride ion. This is how the compound sodium chloride is formed.

Answer:

Explanation:

To find the concentration; let's first compute the average density and the average atomic weight.

For the average density [tex]\rho_{avg}[/tex]; we have:

[tex]\rho_{avg} = \dfrac{100}{ \dfrac{C_{Fe} }{\rho_{Fe}} + \dfrac{C_v}{\rho_v} }[/tex]

The average atomic weight is:

[tex]A_{avg} = \dfrac{100}{ \dfrac{C_{Fe} }{A_{Fe}} + \dfrac{C_v}{A_v} }[/tex]

So; in terms of vanadium, the Concentration of iron is:

[tex]C_{Fe} = 100 - C_v[/tex]

From a unit cell volume [tex]V_c[/tex]

[tex]V_c = \dfrac{n A_{avc}}{\rho_{avc} N_A}[/tex]

where;

[tex]N_A[/tex] = number of Avogadro constant.

SO; replacing [tex]V_c[/tex] with [tex]a^3[/tex] ; [tex]\rho_{avg}[/tex] with [tex]\dfrac{100}{ \dfrac{C_{Fe} }{\rho_{Fe}} + \dfrac{C_v}{\rho_v} }[/tex] ; [tex]A_{avg}[/tex] with [tex]\dfrac{100}{ \dfrac{C_{Fe} }{A_{Fe}} + \dfrac{C_v}{A_v} }[/tex] and

[tex]C_{Fe}[/tex] with [tex]100-C_v[/tex]

Then:

[tex]a^3 = \dfrac { n \Big (\dfrac{100}{[(100-C_v)/A_{Fe} ] + [C_v/A_v]} \Big) } {N_A\Big (\dfrac{100}{[(100-C_v)/\rho_{Fe} ] + [C_v/\rho_v]} \Big) }[/tex]

[tex]a^3 = \dfrac { n \Big (\dfrac{100 \times A_{Fe} \times A_v}{[(100-C_v)A_{v} ] + [C_v/A_Fe]} \Big) } {N_A \Big (\dfrac{100 \times \rho_{Fe} \times \rho_v }{[(100-C_v)/\rho_{v} ] + [C_v \rho_{Fe}]} \Big) }[/tex]

[tex]a^3 = \dfrac { n \Big (\dfrac{100 \times A_{Fe} \times A_v}{[(100A_{v}-C_vA_{v}) ] + [C_vA_Fe]} \Big) } {N_A \Big (\dfrac{100 \times \rho_{Fe} \times \rho_v }{[(100\rho_{v} - C_v \rho_{v}) ] + [C_v \rho_{Fe}]} \Big) }[/tex]

Replacing the values; we have:

[tex](0.289 \times 10^{-7} \ cm)^3 = \dfrac{2 \ atoms/unit \ cell}{6.023 \times 10^{23}} \dfrac{ \dfrac{100 (50.94 \g/mol) (55.84(g/mol)} { 100(50.94 \ g/mol) - C_v(50.94 \ g/mol) + C_v (55.84 \ g/mol) } }{ \dfrac{100 (7.84 \ g/cm^3) (6.0 \ g/cm^3 } { 100(6.0 \ g/cm^3) - C_v(6.0 \ g/cm^3) + C_v (7.84 \ g/cm^3) } }[/tex]

[tex]2.41 \times 10^{-23} = \dfrac{2}{6.023 \times 10^{23} } \dfrac{ \dfrac{100 *50*55.84}{100*50.94 -50.94 C_v +55.84 C_v} }{\dfrac{100 * 7.84 *6}{600-6C_v +7.84 C_v} }[/tex]

[tex]2.41 \times 10^{-23} (\dfrac{4704}{600+1.84 C_v})=3.2 \times 10^{-24} ( \dfrac{284448.96}{5094 +4.9 C_v})[/tex]

[tex]\mathbf{C_v = 9.1 \ wt\%}[/tex]

Answer:

Hi there, the question asked is not complete but not to worry, I will give an explanation that you will be able to solve similar question or the same question when you get the whole question.

Explanation:

Oxalic acid is a diprotic acid and the acid is used with or react with sodium Hydroxide, NaOH in order to determine the molar mass of unknown diprotic acid. Oxalic Acid reacts with sodium as it is given in the balanced chemical reaction below:

(COOH)₂ + 2NaOH ------------------------------------------------------> Na₂C₂O₄ + 2H₂O.

The amount of the oxalic needed is known, say x gram and the molar mass is known. Thus, the number of moles of the oxalic acid= mass/molar mass = x gram/ 90.0 g/mol.

So we say that (COOH)₂ is a primary standard acid which is been used to standardize the base that is Sodium hydroxide.

Then, if we have an unknown diprotic acid, say H₂A, we can react it with NaOH to get the molar mass of the unknown.

H₂A + 2NaOH ---------------------------------------------------------------> Na₂A + 2H₂O.

Therefore, the number of moles of the acid = [concentration of NaOH × volume of NaOH] × [ 1 mole of the acid/ 2 mole of NaOH].

Answer:

O Each orbit has a specific energy level.

Explanation:

Neils Bohr put forward his own model of the atom based on the quantum mechanics originally developed by Planck.

He assumed the Rutherford's model and suggested that the extranuclear part consists of electrons in specific spherical orbits around the nucleus.

The orbits/energy level are the permissible through which the electrons can move through.

His concept is based the concept that the electron can move round the nucleus in certain permissible orbitss

its dry i think

Explanation:

it might be dry

Answer:

Mass =  76986  g

Explanation:

Given data:

Dimensions of tank = 126 cm× 47 cm× 13 cm

Mass of water required to filled = ?

Solution:

First of all we will calculate the volume of tank which is equal to the volume of water required to fill it.

Volume = length ×height ×width

Volume = 126 cm × 13 cm× 47 cm

Volume = 76986 cm³

Mass of water:

Mass = density × volume

density of water is 1 g/cm³

Mass = 1 g/cm³× 76986 cm³

Mass =  76986  g

Answer:

0.0847M is molarity of sodium hydrogen citrate in the solution

Explanation:

The 2.0%(w/v) solution of sodium hydrogen citrate contains 2g of the solute in 100mL of solution. To find the molarity of the solution we need to convert the mass of solute to moles using molar mass and the mL of solution to Liters because molarity is the ratio between moles of sodium hydrogen citrate and liters of solution.

Moles Na2C6H6O7:

Molar Mass:

2Na: 2*22.99g/mol: 45.98g/mol

6C: 6*12.01g/mol: 72.01g/mol

6H: 6*1.008g/mol: 6.048g/mol

7O: 7*16g/mol: 112g/mol

45.98g/mol + 72.01g/mol + 6.048g/mol + 112g/mol = 236.038g/mol

Moles of 2g:

2g * (1mol / 236.038g) = 8.473x10⁻³ moles

Liters solution:

100mL * (1L / 1000mL) = 0.100L

Molarity:

8.473x10⁻³ moles / 0.100L =

Answer:

0.085M

Explanation:

Molecular weight of sodium hydrogen citrate=236.09 g

236.09 g of Na2C6H6O7 in 1000ml= 1 M

2%= 2 g in 1 litre (1000ml)

20/236.09=0.0847 M=0.085 M