Which reaction produces an increase in the entropy of the system?
H 2 (g) + Cl 2 (g) → 2 HCl (g)
H 2O (l) → H 2O (s)
N 2 (g) + 3 H 2 (g) → 2 NH 3 (g)
Ag + (aq) + Cl - (aq) → AgCl (s)
CO 2 (s) → CO 2 (g)

The MW of rGFP in the band can be determined by comparing the mobility of the band with that of protein standards run on the same gel.

The Western blotting technique is utilized to identify and detect specific proteins in a sample of tissue or extract. If there is a band in the W2 lane of the Western blot, one can conclude that rGFP is present in that band. The physical protein structure of rGFP could not be inferred from the presence of a band in the W2 lane of the Western blot.  This requires additional analysis such as X-ray crystallography, nuclear magnetic resonance, or cryo-electron microscopy to analyze protein structure. MW is the molecular weight which can be determined using a molecular weight marker that runs in a parallel lane to the protein extract on the gel. In the Western blotting method, SDS-PAGE is typically used to separate proteins based on their size. The SDS-PAGE gel is calibrated with protein markers that have a known molecular weight. Hence, the MW of rGFP in the band can be determined by comparing the mobility of the band with that of protein standards run on the same gel.

Learn more about protein here:

https://brainly.com/question/31017225

#SPJ11

Answer:

100gmol

Explanation:

a. Acetylsalicylic acid is a weak acid because it dissociates only partially in water.

b. The expression for Ka for acetylsalicylic acid is

Ka = [H+][C9H7O4O-]/[C9H8O4].

The ionization of acetylsalicylic acid is,

                    C9H8O4    +     H2O  ⇌     H3O+   +  C9H7O4O-

Initial               0.20 M                                0                  0

Change              - x                                     + x              + x

Equilibrium     0.20 - x                                x                   x

The value of Ka for acetylsalicylic acid is 3.0 × 10-4.

Ka = [H+][C9H7O4O-]/[C9H8O4]= 3.0 × 10-4

[H+]^2/[C9H8O4] = 3.0 × 10^-4 × [0.20 - x]

The ionization constant expression is solved for the value of x using the quadratic equation,

0.60 x 10-4 = x^2

               x = 0.0077 M

[H+] = 7.8 × 10-4

The percentage of ionization is,

% ionization = (x/[C9H8O4]) × 100

                    = (0.0077/[0.20]) × 100

                    = 3.85%

Therefore, the % ionization for the solution of acetylsalicylic acid is 3.85%.

Learn more about the % ionization:

brainly.com/question/14907187

#SPJ11

Sublimation is an effective technique for the isolation of pure caffeine because: The purified caffeine will vaporize and can be collected as a solid, leaving impurities behind.

So, the answer is B.

Sublimation is a chemical technique that is used to isolate the pure form of a substance from impure or mixed form. It is the phase transition of a solid directly to a gas without passing through a liquid phase.

It is an effective technique for the isolation of pure caffeine due to the following reasons:During sublimation, the purified caffeine will vaporize and can be collected as a solid, leaving impurities behind.

The caffeine is heated, and the heat causes the solid to vaporize directly from the solid phase to the gas phase, skipping the liquid phase. Thus, it separates the caffeine from impurities and provides pure caffeine. Therefore, option B is correct.

Learn more about sublimation at:

https://brainly.com/question/30706116

#SPJ11

There are 20 electrons in the cyclobutadiene molecule shown in the image.

Cyclobutadiene is a molecule that contains 4 carbon atoms and 4 hydrogen atoms. The chemical formula for cyclobutadiene is C4H4. It is a highly reactive molecule and is unstable in its pure form. It has a square planar shape, and each carbon atom is bonded to two neighboring carbon atoms and one hydrogen atom.

Each carbon atom in cyclobutadiene has four valence electrons, and each hydrogen atom has one valence electron. Valence electrons are the outermost electrons in an atom and are involved in chemical bonding. The number of valence electrons in an atom is determined by the group number in the periodic table.

Carbon is in group 14, so it has 4 valence electrons. Hydrogen is in group 1, so it has 1 valence electron. The total number of valence electrons in cyclobutadiene is calculated by adding the valence electrons of all the atoms.

4 carbon atoms x 4 valence electrons per carbon atom = 16 valence electrons4 hydrogen atoms x 1 valence electron per hydrogen atom = 4 valence electrons Total number of valence electrons = 16 + 4 = 20Therefore, there are 20 electrons in the cyclobutadiene molecule shown in the image.

To know more about cyclobutadiene molecule refer here: https://brainly.com/question/28178372#

#SPJ11

With a simple main effect, the results are analyzed as if you had separate experiments at each level of the other independent variable.

In the realm of factorial ANOVA, an enlightening endeavor known as a simple main effect analysis arises. Within this statistical examination, the intricate interplay of two or more independent variables upon a dependent variable is meticulously unraveled.

When a notable interplay between these independent variables materializes, the pursuit of comprehension beckons the astute pursuit of simple main effects analyses, illuminating the essence of the interaction.

Learn about simple main effect here https://brainly.com/question/31355373

#SPJ4

Answer:

D

Explanation:

With the collision, obviously Ball 2's velocity increased, while Ball 1 slowed down a little bit due to the impact. This decrease in velocity caused a decrease in Ball 1's Momentum. Satisfying both conditions, option D is right.

A low vapor pressure indicates the presence of weak intermolecular forces in a liquid. The correct answer is: c.

The strength of intermolecular forces in a liquid determines the vapor pressure of the liquid. A liquid with strong intermolecular forces will have a low vapor pressure, while a liquid with weak intermolecular forces will have a high vapor pressure.

This is because the molecules in a liquid with weak intermolecular forces are more likely to escape from the surface of the liquid and enter the gas phase.

The other options are incorrect because they are all properties that indicate the presence of strong intermolecular forces in a liquid. A high boiling point indicates that a large amount of energy is required to overcome the intermolecular forces and vaporize the liquid.

A high surface tension indicates that the molecules in the liquid are strongly attracted to each other and to the surface of the liquid. A low heat of vaporization indicates that a small amount of energy is required to overcome the intermolecular forces and vaporize the liquid.

Therefore, the only property that indicates the presence of weak intermolecular forces in a liquid is a low vapor pressure.

Therefore, the correct option is C, a low vapor pressure.

To know more about weak intermolecular forces, refer here:

https://brainly.com/question/30516260#

#SPJ11

The number of molecules present is the only quantity that will be the same for both flasks. The quantity that will be the same for both flasks is:

d. number of molecules present

The number of molecules present in each flask is determined by the ideal gas equation, which states that the number of molecules (n) is proportional to the product of the pressure (P), volume (V), and the inverse of the temperature (T):

PV = nRT

Since the two flasks have the same volume, the number of molecules present will be the same if the temperature and pressure are also the same.

However, for the other quantities listed:

a. average molecular speed: The average molecular speed of a gas is directly proportional to the square root of the temperature. Since the temperatures in the two flasks are different (0°C and the other temperature is not specified), the average molecular speeds will be different.

b. density: The density of a gas is determined by its molar mass and pressure. Since [tex]H_2[/tex] and [tex]CO_2[/tex] have different molar masses, their densities will be different even if the pressures are the same.

c. average molecular kinetic energy: The average molecular kinetic energy of a gas is directly proportional to the temperature. Since the temperatures in the two flasks are different, the average molecular kinetic energies will be different.

Therefore, the number of molecules present is the only quantity that will be the same for both flasks.

Learn more about kinetic energy at

brainly.com/question/31912401

#SPJ4

Answer:

A. Particle emitted = alpha particle; Protons lost = 2; Change in mass = -4

B. Particle emitted = alpha particle; Protons lost = 2; Change in mass = -4

C. Particle emitted = beta particles; protons gained = 1; Change in mass = 0

D. Particle emitted = alpha particle; Protons lost = 2; Change in mass = -4

E. Particle emitted = gamma ray; protons gained = 0; Change in mass = 0

F. Particle emitted = alpha particle; Protons lost = 2; Change in mass = -4

Explanation:

Radioactivity is the spontaneous disintegration of nucleus of an atom resulting in emission of particles and radiation unyil a stable atomic nuclei is obtained. Substances that are exhibit radioactivity are known as radioactive substances and are usually isotopes of stable atoms.

The types of radiation emitted by a radioactive substances include alpha rays, beta rays, and gamma rays.

Alpha rays or particles are fast moving positively charged particles with a mass number of four and atomic number of two. Thus, each alpha particle is a helium nucleus.

Beta rays or particles are vary fast moving stream of electrons having a mass number of zero and a charge of -1.

Gamma rays are not particles but are electromagnetic waves similar to visible light and X-rays but with shorter wavelengths. They have no mass or charge.

An atom emitting alpha particles has its mass reducing by 4 units and its atomic number decreasing by 2.

An atom emitting beta particles as it decays has no change in mass but its atomic number increases by 1.

From the table:

A. Particle emitted = alpha particle; Protons lost = 2; Change in mass = -4

B. Particle emitted = alpha particle; Protons lost = 2; Change in mass = -4

C. Particle emitted = beta particles; protons gained = 1; Change in mass = 0

D. Particle emitted = alpha particle; Protons lost = 2; Change in mass = -4

E. Particle emitted = gamma ray; protons gained = 0; Change in mass = 0

F. Particle emitted = alpha particle; Protons lost = 2; Change in mass = -4

Answer: There is no eclipse. However, two or four times a year, the Moon travels through some portion of the Earth's penumbral or umbral shadows, resulting in one of the three types of eclipses mentioned above. When the Moon crosses between the Earth and the Sun, this occurs. This is only possible when the Moon is in its New Moon phase.

Explanation:

HOPE THIS HELPS!!! : )

In the neutralization reaction, the Brønsted-Lowry conjugate acid-base pairs are the acid HCl and the base OH- as well as the acid H₂O and the base Cl-.

The neutralization reaction involves the formation of two Brønsted-Lowry conjugate acid-base pairs. The acid-base pairs are HCl (acid) and OH⁻ (base), as well as H₂O (acid) and Cl⁻ (base). In this reaction, the acid donates a proton (H+) to the base, resulting in the formation of water and a salt. HCl donates a proton to OH- to form water, while H₂O donates a proton to Cl⁻ to form hydrochloric acid (HCl). The transfer of protons between the acid and base creates the conjugate acid-base pairs.

Brønsted-Lowry acid-base theory describes the transfer of protons (H+) between acids and bases. Acids are proton donors, while bases are proton acceptors. In a neutralization reaction, an acid reacts with a base to form a salt and water.

The acid donates a proton to the base, forming a conjugate base, while the base accepts the proton, forming a conjugate acid. In the given neutralization reaction, HCl is the acid and OH- is the base, forming water. Simultaneously, H₂O acts as an acid, donating a proton to Cl⁻, which acts as a base, forming HCl. Understanding conjugate acid-base pairs is essential in comprehending acid-base reactions and their equilibrium.

Learn more about: Neutralization reaction

brainly.com/question/27745033

#SPJ11

Answer:

It would be C. Wind blowing against a rock can reduce the rock´s size.

Explanation:

Based on the hypotheses discussed in Chapter 12 regarding melting points and the forces that hold materials together, we can make a prediction about the forces holding atoms of cesium and lithium together in their solid metal forms.

One hypothesis suggests that stronger forces between atoms result in higher melting points. Another hypothesis proposes that metals are held together by metallic bonds, where positively charged metal ions are surrounded by a sea of delocalized electrons.

Considering these hypotheses, we can infer that cesium atoms would be held together by stronger forces compared to lithium atoms in their solid metal forms. This is because cesium is located further down the periodic table, belonging to Group 1 (alkali metals), whereas lithium is in Group 2 (alkaline earth metals). As we move down a group in the periodic table, the atomic radius generally increases, leading to weaker forces of attraction between atoms.

Therefore, the larger atomic size of cesium compared to lithium would result in weaker interatomic forces, making cesium's solid metal form have a lower melting point compared to lithium.

To know more about cesium, follow the link:

https://brainly.com/question/28655027

#SPJ4

Explanation:

molarity = no. of moles of solute/solution in litres

molarity =0.202/7.98

=0.025 M

Answer:

If the choices were coal, petroleum, and natural gas, I would say that petroleum has the greatest impact on the CO₂ levels in the atmosphere. I chose petroleum because of transportation, such as cars, trucks, planes, and more.

Option B is correct. benzene (C6H6). Pentane is an aliphatic hydrocarbon with only nonpolar C-C and C-H bonds, making it a nonpolar solvent. Its chemical formula is C₅H₁₂.

Benzene (C₆H₆) is also a nonpolar compound, consisting of a hexagonal ring of carbon atoms with hydrogen atoms attached. The carbon-carbon (C-C) bonds and carbon-hydrogen (C-H) bonds in benzene are nonpolar, resulting in a nonpolar molecule.

On the other hand, pentanol (C₅H₁₁OH), acetic acid (C₂H₄O₂), and ethyl methyl ketone (C₄H₈O) contain polar functional groups such as hydroxyl (-OH), carboxyl (-COOH), and carbonyl (-CO-) groups, respectively. These polar functional groups create polarity within the molecules.

Read more on Benzene here https://brainly.com/question/14788042

#SPJ4

Answer:

fossil fuels are an  nonrenewable resource that people are hoping to replace with renewable resources

Explanation:

Answer:

5 mL

Explanation:

As this is a problem regarding dilutions, we can solve it using the following formula:

Where subscript 1 refers to the initial concentration and volume, while 2 refers to the final C and V. Meaning that in this case:

We input the data:

And solve for V₁:

Answer:

5 mL of 5.0 M H₂SO₄ (aq) are needed to prepare 100 mL of 0.25 M H₂SO₄ (aq).

Explanation:

In chemistry, dilution is the reduction of the concentration of a chemical in a solution.

Then, dilution consists of preparing a less concentrated solution from a more concentrated one, and it consists simply by adding more solvent to the same amount of solute. That is, the amount or mass of the solute is not changed, but the volume of the solvent varies: as more solvent is added, the concentration of the solute decreases, since the volume (and weight) of the solution increases.

A dilution is calculated by the expression:

Ci*Vi = Cf*Vf

where:

In this case, you know:

Replacing:

5 M*Vi = 0.25 M* 100 mL

Solving:

[tex]Vi= \frac{0.25 M*100 mL}{5 M}[/tex]

Vi= 5 mL

5 mL of 5.0 M H₂SO₄ (aq) are needed to prepare 100 mL of 0.25 M H₂SO₄ (aq).

To prepare a 25.00 mL solution of 0.0250 M NaF, you can follow either of the following procedures:

a. Using Solid NaF:

b. Using 0.100 M NaF Solution:

Both procedures involve careful measurement and mixing of the NaF compound with distilled water in a volumetric flask. The resulting solutions will have a concentration of 0.0250 M NaF.

Read more on glassware here https://brainly.com/question/5017654

#SPJ4

The balanced equation is:

(a) 2Mn^2+ + 2H2O2 + 4OH^- → 2MnO_2 + 4H2O.

(b)3SnO2^2- + 6OH^- + 2Bi(OH)3 → 3SnO3^2- + 2Bi + 9H2O. (c)14Cr2O7^2- + 7C2O4^2- + 22H2O → 4Cr^3+ + 14CO2 + 28H+ + 28e^-. (d)2ClO3^- + 16H^+ + 3Cl^- → 3Cl2 + 8H2O

(e)10BiO3^- + 60H^+ + 12Mn^2+ → 10Bi^3+ + 30H2O + 12MnO4^-

a. In the balanced redox equation Mn^2+ + H_2O_2 → MnO_2 + H_2O (in basic solution), the half-reactions are:

Reduction: Mn^2+ → MnO_2

Oxidation: H_2O_2 → H_2O

To balance the reduction half-reaction, we need to add four OH^- ions to the left side: Mn^2+ + 4OH^- → MnO_2 + 2H2O + 2e^-

To balance the oxidation half-reaction, we add four OH^- ions to the right side and water molecules to balance the oxygen atoms: H2O2 + 4OH^- → 2H2O + 2e^-

Now, multiply the reduction half-reaction by two and the oxidation half-reaction by one to equalize the electrons:

2(Mn^2+ + 4OH^- → MnO_2 + 2H2O + 2e^-)

H2O2 + 4OH^- → 2H2O + 2e^-

Finally, add the two half-reactions together and cancel out the common species: 2Mn^2+ + 2H2O2 + 4OH^- → 2MnO_2 + 4H2O

b. The balanced redox equation Bi(OH)3 + SnO2^2- → SnO3^2- + Bi (in basic solution) can be balanced by following these steps:

Reduction: SnO2^2- → SnO3^2-

Oxidation: Bi(OH)3 → Bi

To balance the reduction half-reaction, add two OH^- ions to the left side: SnO2^2- + 2OH^- → SnO3^2- + H2O + 2e^-

To balance the oxidation half-reaction, add six OH^- ions to the right side: Bi(OH)3 → Bi + 3H2O + 3e^-

Multiply the reduction half-reaction by three and the oxidation half-reaction by two to equalize the electrons:

3(SnO2^2- + 2OH^- → SnO3^2- + H2O + 2e^-)

2(Bi(OH)3 → Bi + 3H2O + 3e^-)

Combine the two half-reactions and cancel out the common species:

3SnO2^2- + 6OH^- + 2Bi(OH)3 → 3SnO3^2- + 2Bi + 9H2O

c. In the acidic solution, the balanced redox equation Cr2O7^2- + C2O4^2- → Cr^3+ + CO2 can be balanced as follows:

Reduction: Cr2O7^2- → Cr^3+

Oxidation: C2O4^2- → CO2

To balance the reduction half-reaction, add seven H2O molecules to the right side: Cr2O7^2- → 2Cr^3+ + 7H2O + 14e^-

To balance the oxidation half-reaction, add eight H^+ ions to the left side:

C2O4^2- + 2H2O → 2CO2 + 4H+ + 4e^-

Multiply the reduction half-reaction by two and the oxidation half-reaction by seven to equalize the electrons:

2(Cr2O7^2- → 2Cr^3+ + 7H2O + 14e^-)

7(C2O4^2- + 2H2O → 2CO2 + 4H+ + 4e^-)

Combine the two half-reactions and cancel out the common species:

14Cr2O7^2- + 7C2O4^2- + 22H2O → 4Cr^3+ + 14CO2 + 28H+ + 28e^-

d. In the acidic solution, the balanced redox equation ClO3^- + Cl^- → Cl2 + ClO2 can be balanced as follows:

Reduction: ClO3^- → ClO2

Oxidation: Cl^- → Cl2

To balance the reduction half-reaction, add two H^+ ions to the right side:

ClO3^- + 2H^+ → ClO2 + H2O + 2e^-

To balance the oxidation half-reaction, add two H2O molecules to the left side:

2Cl^- → Cl2 + 2e^-

Multiply the reduction half-reaction by two and the oxidation half-reaction by one to equalize the electrons:

2(ClO3^- + 2H^+ → ClO2 + H2O + 2e^-)

Cl^- → Cl2 + 2e^-

Combine the two half-reactions and cancel out the common species:

2ClO3^- + 16H^+ + 3Cl^- → 3Cl2 + 8H2O

e. In the acidic solution, the balanced redox equation Mn^2+ + BiO3^- → Bi^3+ + MnO4^- can be balanced as follows:

Reduction: BiO3^- → Bi^3+

Oxidation: Mn^2+ → MnO4^-

To balance the reduction half-reaction, add six H^+ ions to the left side:

BiO3^- + 6H^+ → Bi^3+ + 3H2O + 6e^-

To balance the oxidation half-reaction, add eight H^+ ions to the right side:

Mn^2+ → MnO4^- + 8H^+ + 5e^-

Multiply the reduction half-reaction by five and the oxidation half-reaction by two to equalize the electrons:

5(BiO3^- + 6H^+ → Bi^3+ + 3H2O + 6e^-)

2(Mn^2+ → MnO4^- + 8H^+ + 5e^-)

Combine the two half-reactions and cancel out the common species:

10BiO3^- + 60H^+ + 12Mn^2+ → 10Bi^3+ + 30H2O + 12MnO4^-

To learn more about Redox equations, click here: brainly.com/question/17166814

#SPJ11

Lewis acid: Fe(NO3)3Lewis base: H2OThe Lewis acid is H+ and the Lewis base is NH3.

The Lewis concept of acids and bases, Lewis acids are those that have an incomplete valence shell and accept electrons from a Lewis base. A Lewis base has at least one electron pair available to form a covalent bond with a Lewis acid, filling its valence shell. The Lewis acid and base in each of the following reactions are given below:Fe(NO3)3(s) + 6H2O(l) ⟶ Fe(H2O)63+(aq) + 3NO3?(aq)The Lewis acid is Fe3+ and the Lewis base is H2O.NH3(g) + HCl(g) ⟶ NH4Cl(s)The Lewis acid is H+ and the Lewis base is NH3.Neither HCl nor NH3 is a Lewis acid or base in this particular reaction. Therefore, you made a mistake in your answer. The correct answers are as follows:Lewis acid: Fe(NO3)3Lewis base: H2OThe Lewis acid is H+ and the Lewis base is NH3.

Learn more about Lewis acid here:

https://brainly.com/question/15103003

#SPJ11

Ask your parents or guardian for a tutor.

It's very dangerous to give someone your snap online that you don't know!

Have a nice day <3

Answer:

Energía geotérmica (calor → energía eléctrica) Motores térmico, como el motor de combustión interna utilizado en automóviles o el motor de vapor (calor → energía mecánica) Energía térmica oceánica (calor → energía eléctrica) Represas hidroeléctricas (energía potencial gravitacional → energía eléctrica)

Explanation:

Answer:

One type of energy can change into another type of energy. Energy transformation means the changing of energy from one type to another, e.g. from kinetic energy to electrical energy, or from potential energy to kinetic energy.

Explanation:

Answer:

Molarity is moles per liter. You have one mole in 0.750 liters

Explanation:

Answer: White bread

Explanation: