Which property increases as you move down a column in the periodic table?
A) atomic size
B) ionization energy
C) nonmetallic character
D) none of the above (all increase as you move down a column).

Answer:

The optical properties of a material define how it interacts with light. The optical properties of matter are studied in optical physics, a subfield of optics. Wiki.pedia

Explanation:

Answer:

See explanation

Explanation:

a) The magnitude of intermolecular forces in compounds affects the boiling points of the compound. Neon has London dispersion forces as the only intermolecular forces operating in the substance while HF has dipole dipole interaction and strong hydrogen bonds operating in the molecule hence HF exhibits a much higher boiling point than Ne though they have similar molecular masses.

b) The boiling points of the halogen halides are much higher than that of the noble gases because the halogen halides have much higher molecular masses and stronger intermolecular forces between molecules compared to the noble gases.

Also, the change in boiling point of the hydrogen halides is much more marked(decreases rapidly)  due to decrease in the magnitude of hydrogen bonding from HF to HI. The boiling point of the noble gases increases rapidly down the group as the molecular mass of the gases increases.

Answer:

140 mol CO₂.

Explanation:

In order to convert from moles of octane (C₈H₁₈) into moles of CO₂, we can use a conversion factor with the stoichiometric coefficients of the balanced reaction:

140 moles of CO₂ can be produced from 17.5 moles of octane.

Answer: Animals found in the Arctic tundra include herbivorous mammals (lemmings, voles, caribou, arctic hares, and squirrels), carnivorous mammals (arctic foxes, wolves, and polar bears), fish (cod, flatfish, salmon, and trout), insects (mosquitoes, flies, moths, grasshoppers, and blackflies), and birds (ravens, snow buntings

The lives in Artic tundra biome is caribou.

Artic tundra biome is the northernmost biome, which covers the land of the arctics with the ice caps.

Climate of this Artic tundra biome is almost cold means the temperature in winter season of this region is about -34 degree celsius. In this region small animals like Norway lemmings as well as large animals like caribou are present which have high amount of fat to rescue from the cold.

Hence, option (a) is correct.

To know more about Artic tundra biome, visit the below link:
https://brainly.com/question/16056049

Answer:

I honestly don't know but I hope you get more points! ;D

Explanation:

Answer: 49.8 g

Explanation: molar mass M(KI) = 39.1+ 126.9 = 166 g/mol

Mass m= n·M= 0.3 mol· 166 g/mol

the answer is gold cause oil wood and glass are electrical insulators

Answer:

3 × 10⁴ kJ

Explanation:

Step 1: Write the balanced thermochemical equation

C₃H₈(g) + 5 O₂(g) ⟶ 3 CO₂(g) + 4 H₂O(g) ΔH = -2220 kJ

Step 2: Calculate the moles corresponding to 865.9 g of H₂O

The molar mass of H₂O is 18.02 g/mol.

865.9 g × 1 mol/18.02 g = 48.05 mol

Step 3: Calculate the heat produced when 48.05 moles of H₂O are produced

According to the thermochemical equation, 2220 kJ of heat are evolved when 4 moles of H₂O are produced.

48.05 mol × 2220 kJ/4 mol = 2.667 × 10⁴ kJ ≈ 3 × 10⁴ kJ

Answer:

496 g of Fe₂O₃.

Explanation:

The balanced equation for the reaction is given below:

4Fe + 3O₂ —> 2Fe₂O₃

From the balanced equation above,

4 moles of Fe reacted to produce 2 moles of Fe₂O₃.

Therefore, 6.20 moles of Fe will react to produce = (6.20 × 2)/4 = 3.1 moles of Fe₂O₃

Finally, we shall determine the mass of 3.1 moles of Fe₂O₃. This can be obtained as follow:

Mole of Fe₂O₃ = 3.1 moles

Molar mass of Fe₂O₃ = (56 × 2) + (3×16)

= 112 + 48

= 160 g/mol

Mass of Fe₂O₃ =?

Mass = mole × molar mass

Mass of Fe₂O₃ = 3.1 × 160

Mass of Fe₂O₃ = 496 g

Therefore, 496 g of Fe₂O₃ were produced from the reaction.

Answer:

Reaction that takes place at the Zn electrode is oxidation:

Zn ⇄  Zn²⁺  +  2e⁻

Explanation:

This excersise explains the structure of a typical battery, that is useful to study electrochemistry.

AgNO₃ → Ag⁺ + NO₃

ZnSO₄ → Zn²⁺  +  SO₄⁻²

Generally batteries contains 2 electrodes, where we have 2 conductive metallic. Batteries work to obtain electricity from a chemistry reaction which is always a redox type. One electrode releases electrons while the other catch them. Electrons travel from the anode to cathode, so in the anode, the e⁻ are released.

Reaction that takes place at the Zn electrode is oxidation:

Zn ⇄  Zn²⁺  +  2e⁻

Oxidation state is increased, electrons are free to go to cathode, where the other element decreases the oxidation state:

Ag⁺ + e⁻  ⇄ Ag

In the middle of the battery, the salt bridge (generally KCl) contributes the redox with more charges. Cl⁻ for the anode and K⁺ for the cathode.

Note that the same amount of electrons travel from anode to cathode, because in this example, Ag gained 1 mol and Zn released 2 moles.

The scheme for the battery is:

⁻  Zn(s) / Zn²⁺ (aq) //  Ag⁺ (aq) / Ag (s) ⁺

         1 M                               1 M                      

Where the first place represents the anode, // represents the salt bridge and then, the cathode.  Below, we write the molar concentration of each salt.

Answer:

Is there any other part to this question? If not I'm pretty sure the answer is 205.5 kJ

Explanation:

Answer:

822 kJ; 411 kJ/mol.

Explanation:

A chemist measures the enthalpy change during the following reaction: ()()()Use this information to complete the table below. Round each of your answers to the nearest kJ/mol. 1. ()()()Solution:  given reaction is 2Na + Cl2 --> 2NaCl         delta H = -822 KJ 1) 1/2Na + 1/4Cl2 --> 1/2NaCl divide the coficiant of given.

Answer:

Answer: pH = 2.72

Explanation:

Calculate the pH of 0.010 M HNO2 solution. The K, for HNO2 is 4.6 x 104 

Answer:

it's dairy

Explanation

Answer:

[tex]1s^2\, 2s^2[/tex].

Explanation:

Electron orbitals in an atom (e.g., [tex]1s[/tex]) are denoted with:

There are two aspects to consider when finding the electron configuration of an atom:

The [tex]s[/tex] orbital in each shell could hold up to [tex]2 \times 1 = 2[/tex] electrons (one [tex]s\![/tex] orbital per shell, with up to two electrons.)

The [tex]p[/tex] orbitals in each shell could hold up to [tex]2 \times 3 = 6[/tex] electrons (three [tex]p\![/tex] orbitals per shell, with up to two electrons in each orbital.)

The [tex]d[/tex] orbitals in each main shell could hold up to [tex]2 \times 5 = 10[/tex] electrons (five [tex]d\![/tex] orbitals per shell, with up to two electrons in each orbital.)

Refer to the order in which the orbitals are filled (Aufbau principle.)

All four electrons of Beryllium are thus assigned to the [tex]1s[/tex] and [tex]2s[/tex] orbitals. In a ground-state Beryllium atom, orbitals [tex]2p[/tex] and beyond would contain no electrons.

Notation:

Write the non-empty orbitals in the order by which they are filled:

[tex]1s^2\, 2s^2[/tex].

Answer:

A via A P E X

The entity that would make ΔG to become negative at a given enthalpy and entropy is Changing the temperature (Option A)

ΔG = ΔH – TΔS

Where

NOTE

ΔG = +ve (non spontaneous)

ΔG = 0 (equilibrium)

ΔG = –ve (spontaneous)

From the Gibbs free energy equation, we can see that the entities that makes us the equation are

Thus, we can conclude that the correct answer to the question is: changing the temperature (Option A) since the equation has nothing to do with neither concentration, pressure nor volume

Learn more about Gibbs free energy:

https://brainly.com/question/9552459

#SPJ2

Answer:

7. Option D

Explanation:

Solubility increases with the increase in temperature of the solution. It is so because the increase in temperature leads to increase in kinetic energy which then breaks the solute particles held together by intermolecular attractions.

Hence, option D is correct

Answer:

Mass (kg) × Acceleration (m/s²) = Force (N)

The correct answer is solution B!

Answer:

[tex]0.769\ \text{M}[/tex]

Explanation:

Mass of stock solution = 20 g

Molar mass of NaOH = 40 g/mol

Volume of stock solution = 0.150 mL

[tex]M_2[/tex] = Concentration of NaOH for the final solution

[tex]V_1[/tex] = Amount of stock solution taken = 15 mL

[tex]V_2[/tex] = Total volume of solution = 65 mL

Molarity is given by

[tex]M_1=\dfrac{\text{Mass}}{\text{Molar mass}\times \text{Volume}}\\\Rightarrow M_1=\dfrac{20}{40\times 0.15}\\\Rightarrow M_1=\dfrac{10}{3}[/tex]

We have the relation

[tex]M_1V_1=M_2V_2\\\Rightarrow M_2=\dfrac{M_1V_1}{V_2}\\\Rightarrow M_2=\dfrac{\dfrac{10}{3}\times 15}{65}\\\Rightarrow M_2=0.769\ \text{M}[/tex]

The concentration of NaOH for the final solution is [tex]0.769\ \text{M}[/tex].

Answer:

[tex]V_2=1228.9L[/tex]

Explanation:

Hello there!

In this case, given the pressure, temperature and volume of the gas, we notice that we need the combined ideal gas as shown below:

[tex]\frac{P_2V_2}{T_2} =\frac{P_1V_1}{T_1}[/tex]

Thus, solving for the final volume, V2,  we would obtain:

[tex]V_2=\frac{P_1V_1T_2}{T_1P_2}[/tex]

Now, we plug in the data and make sure the temperature must be in Kelvins to obtain:

[tex]V_2=\frac{200atm*6.0L*(25+273)K}{(18+273.15)K(1.0atm)}\\\\V_2=1228.9L[/tex]

Best regards!

Answer:

Explanation:

c it’s see it

This question is incomplete, the complete question is;

g Consider a pure sample of a radioactive isotope with a mass number of (46 + A). If the sample has mass of (25.0 + B) micrograms and the isotope has a half-life of (4.50 + C)x10⁶ years,

determine the decay rate for the sample. Give your answer in decays/second and with 3 significant figures.

A = 1, B = 1, C = 11.

Answer:

the decay rate for the sample is 469,625.898 decay/s    

Explanation:

Given the data in the question;

[tex]T_{\frac{1}{2}[/tex] = ( 4.50 + C ) × 10⁶ years  

C = 11

[tex]T_{\frac{1}{2}[/tex] = ( 4.50 + 11 ) × 10⁶ years

[tex]T_{\frac{1}{2}[/tex] = 15.50 × 10⁶ years

[tex]T_{\frac{1}{2}[/tex] = 15.50 × 10⁶ × 365 × 24 × 60 × 60  

λ = 0.693 / [tex]T_{\frac{1}{2}[/tex]

so

λ = 0.693 / ( 15.50 × 10⁶ × 365 × 24 × 60 × 60  )

also

N = ( 25.0 + B )

B = 1

N = ( 25.0 + 1 )

N = 26 × 10⁻⁶

isotope with a mass number of ( 46.0 + A ) , A=1

= ( 46.0 + 1 ) = 47

N = 26 × 10⁻⁶( 1/47 )( 1 / 1.67 × 10⁻²⁷ ) =  3.31252 × 10²⁰  

R = λN

so

R = (0.693 / ( 15.50 × 10⁶ × 365 × 24 × 60 × 60  )) × (3.31252 × 10²⁰)

R = 1.41773 × 10⁻¹⁵ × (3.31252 × 10²⁰)

R = 469,625.898 decay/s    

Therefore, the decay rate for the sample is 469,625.898 decay/s    

Answer:

what grade is this?

Answer:

Hello your question lacks some required information attached below is the missing information

answer :

number of moles

Acetic acid = 0.061199 mole

Alcohol = 0.027320 mole

Explanation:

The starting volumes :  2.5mL of either alcohol and 3.5mL of either acid

for the purpose of this solution I will take 2.5 mL of 1-butanol and 3.5 mL of acetic acid

mass of 1-Butanol = 2.5 mL * 0.81 g/mol = 2.025 g

∴ number of moles of 1-butanol = 2.025g / 74.12 g/mol = 0.027320 mole

mass of acetic acid = 3.5 mL * 1.05 g/mol = 3.675 g

∴ number of moles of Acetic acid = 3.675 g/ 60.05 g/mol = 0.061199 mole

Reaction equation

CH3-CH2-CH2-CH2-OH + CH3-COOH + H+ (cat) ↔ CH3-CH2-CH2-CH2-O-CO-CH3 + H2O

Answer:

A) Wood burning

system : Wood.

surroundings : atmosphere

Enthalpy : Exothermic

B) Water Freezing system

System : Refrigerator

surroundings :  water in the refrigerator

enthalpy change : Endothermic

C) Sweat evaporating

System :  Human being

surroundings : Air nearby

Enthalpy change : exothermic

D) Chemical Hand-warmer

system : Hand warmer pack

Surroundings : human palms

Enthalpy Change : Exothermic

Explanation:

A) Wood burning

system : Wood

surroundings : atmosphere

Enthalpy : Exothermic

This system give away energy to its surroundings hence its enthalpy change is exothermic

B) Water Freezing system

System : Refrigerator

surroundings :  water in the refrigerator

enthalpy change : Endothermic

The system absorbs heat from what is put inside(surroundings ) of it hence this is na endothermic system

C) Sweat evaporating

System :  Human being

surroundings : Air nearby

Enthalpy change : exothermic

This is an exothermic reaction ( enthalpy change ) because the system gives out heat to the surrounding

D) Chemical Hand-warmer

system : Hand warmer pack

Surroundings : human palms

Enthalpy Change : Exothermic

There is movement of heat from the system to the surrounding hence it is an exothermic reaction