Answer:
mushrooms bacteria mold
Explanation:
Calculate the mass of iron which will be converted into its
oxide (Fe3O4) by the action of 20 grams of steam on it.
3Fe + 4H2O + Fe3O4 + 4H2
Answer: 46.66 Grams
Explanation:
Credits to jasminealexismacias, Enjoy your CK12
Which one of the following decreases as the strength of the attractive intermolecular forces increases? A) The heat of vaporization B) The boiling point of a liquid C) The vapor pressure of a liquid D) The viscosity of a liquid
The heat of vaporization decreases as the strength of the attractive intermolecular forces increases.
The heat of vaporization is the amount of energy required to convert a substance from its liquid phase to its gaseous phase at a constant temperature. As the strength of the attractive intermolecular forces increases, it becomes more difficult for the molecules to overcome these forces and transition into the gas phase.
This means that a greater amount of energy (heat) is required to break the intermolecular forces and vaporize the substance. Therefore, the heat of vaporization increases as the strength of the attractive intermolecular forces increases.
On the other hand, the boiling point of a liquid (B), the vapor pressure of a liquid (C), and the viscosity of a liquid (D) all tend to increase as the strength of the attractive intermolecular forces increases. Higher intermolecular forces result in higher boiling points, lower vapor pressures, and higher viscosity due to the stronger interactions between molecules.
Learn more about heat of vaporization here:
https://brainly.com/question/30403506
#SPJ4
a sample of br2(g) takes 24.0 min to effuse through a membrane. how long would it take the same number of moles of ar(g) to effuse through the same membrane?
It would take the same number of moles of Ar(g) approximately 6.0 min to effuse through the same membrane.
The Graham's law of effusion states that the rate of effusion of a gas is inversely proportional to the square root of its molar mass (i.e., the larger the molar mass of a gas, the slower it will effuse). Therefore, we can use this law to find the answer to the given problem. Here are the steps to solve the problem:
Step 1: Calculate the molar mass of Br2(g) and Ar(g)
The molar mass of Br2(g) is:1 × 2 + 79.904 × 2 = 159.808 g/mol
The molar mass of Ar(g) is:39.95 g/mol
Step 2: Calculate the ratio of the square roots of the molar masses
Ratio of the square roots of molar masses = sqrt(molar mass of Ar(g)) / sqrt(molar mass of Br2(g))= sqrt(39.95) / sqrt(159.808)= 0.25
Step 3: Calculate the time required for Ar(g) to effuse through the membrane
We can use the ratio of the square roots of molar masses to find the time required for Ar(g) to effuse through the same membrane.
Time for Ar(g) to effuse = (ratio of the square roots of molar masses) × (time for Br2(g) to effuse) = 0.25 × 24.0 min = 6.0 min
Therefore, it would take the same number of moles of Ar(g) approximately 6.0 min to effuse through the same membrane.
Learn more about Graham's law of effusion here:
https://brainly.com/question/32327495
#SPJ11
____ N2 + ___ H2 --> ____ NH3
Reaction :
N2 +H2 →2 NH3
"Reactants Products Nitrogen 2 2 Hydrogen 2 6 Since NH3 is multiplied by a coefficient of 2 there are now 2 nitrogens and 6 hydrogens. The 6 hydrogens come from the 2 multiplied by the subscript of 3."
Which reaction produces an increase in the entropy of the system?
H 2 (g) + Cl 2 (g) → 2 HCl (g)
H 2O (l) → H 2O (s)
N 2 (g) + 3 H 2 (g) → 2 NH 3 (g)
Ag + (aq) + Cl - (aq) → AgCl (s)
CO 2 (s) → CO 2 (g)
CO 2 (s) → CO 2 (g) produces an increase in the entropy of the system
Define entropy.
Entropy is the measurement of the amount of thermal energy per unit of temperature in a system that cannot be used for productive work. Entropy is a measure of a system's molecular disorder or unpredictability since work is produced by organised molecular motion.
Because a higher temperature increases the kinetic energy of molecules and, as a result, unpredictability, the entropy of the system rises with temperature. When a reaction generates more molecules than it started with, entropy typically rises. When a reaction creates fewer molecules than it began with, entropy typically decreases.
To learn more about Entropy :
https://brainly.com/question/419265
#SPJ4
make this and tell me how u like it its fat lady from hairy pawter find the pics on elgoog or use mine movie and site was changed its on scratch a web
Answer:
are u brocken
Explanation:
title = q9a1 The angles in a perfect tetrahedron are 109.5°, and those for a trigonal plane are 120°. Based on its Lewis structure, what would you predict for the bond angles in ammonia, NH3?
The bond angle in ammonia, NH3 is approximately 107°, which is less than the tetrahedral bond angle of 109.5°.
The bond angles in ammonia, NH3 can be predicted based on its Lewis structure.The tetrahedral molecule has bond angles of 109.5°, and the trigonal plane molecule has bond angles of 120°.The shape of ammonia, NH3, molecule can be determined using its Lewis structure. Ammonia molecule has four electrons pairs and a single bond and thus has a tetrahedral electronic geometry. The three hydrogen atoms are situated at the corners of a triangle with nitrogen in the middle. The molecular shape, which determines the bond angles, is thus trigonal pyramidal.The bond angle in ammonia, NH3 is approximately 107°, which is less than the tetrahedral bond angle of 109.5°.
Learn more about bond angle here:
https://brainly.com/question/31324226
#SPJ11
Iron is denser than helium.
True or false
Explanation:
Elements heavier than Helium are synthesized in a number of environments. For elements that are lighter than Iron, those elements are synthesized during various phases in the evolution of massive stars. For elements heavier than Iron, one needs quite a bit of energy input to form these heavy elements.
0.1 mL of urine plated out on nutrient agar. After incubation at 37ºC, 279 colonies appeared. Give the CFU/mL. How many CFU are there per 100 mL?
To calculate the colony-forming units per milliliter (CFU/mL), you need to know the volume plated and the number of colonies counted.
In this case, you plated 0.1 mL of urine and observed 279 colonies after incubation.
CFU/mL can be calculated using the following formula:
CFU/mL = (Number of Colonies / Volume Plated) × Dilution Factor
Since you plated 0.1 mL of urine, the volume plated is 0.1 mL. The dilution factor is assumed to be 1 since no dilution was mentioned.
CFU/mL = (279 colonies / 0.1 mL) × 1
= 2790 CFU/mL
So, there are 2790 CFU/mL of urine.
To calculate the CFU per 100 mL, you can use the following formula:
CFU per 100 mL = CFU/mL × Volume
Since you want to calculate the CFU per 100 mL, the volume is 100 mL.
CFU per 100 mL = 2790 CFU/mL × 100 mL
= 279,000 CFU
Therefore, there are 279,000 CFU per 100 mL of urine.
Learn more about volume here : brainly.com/question/24086520
#SPJ11
electrolytic dissociation of ethanoic acid pls
at which point will the ph of a buffered solution begin to change significantly?
The pH of a buffered solution will begin to change significantly when the concentration of added strong acid or base is greater than the capacity of the buffer.
This capacity is determined by the buffer's concentration and the dissociation constant of its acid-base pair.
When a buffered solution is subjected to small amounts of strong acid or base, it should retain its pH value because the buffer will react with the added ions to produce an excess of weak acid or base ions, keeping the pH constant.
As the concentration of strong acid or base added to the solution increases, however, the capacity of the buffer is eventually exceeded, and the pH of the solution will change significantly.
The capacity of a buffer depends on its concentration and on the acid dissociation constant (Ka) of the weak acid component and the base dissociation constant (Kb) of the weak base component.
This can be calculated using the Henderson-Hasselbalch equation:pH = pKa + log ([A-]/[HA])where pH is the pH of the buffer solution, pKa is the dissociation constant of the weak acid component, [A-] is the concentration of the weak base component, and [HA] is the concentration of the weak acid component.
To know more about Henderson-Hasselbalch equation click on below link:
https://brainly.com/question/31732200#
#SPJ11
Which is the metric standard for measuring energy?
Answer:
Calorie
Explanation:
This can mesure thermal energy
If the number of bacteria in a colony doubles every 18 minutes and there is currently a population of 200,000 bacteria, what will the population be 36 minutes from now?
Answer:
After 36 minutes, there will be a population of 800,000 bacteria.
Explanation:
After the first 18 minutes, it will double to 400,000. Then, at 36 minutes, it will have doubled again, giving you 800,000.
Use the DIvergence theorem to compute the flux of the vector field F(x,y,z) = x3 i + y3 j + z3 K
over the surface\sigmawhich is the surface of the sphere x2 + y2 + z2 = 9
(hint: after setting up the triple integral, use spherical coordinates to compute it)
To compute the flux of [tex]F(x, y, z) = x^3 i + y^3 j + z^3 k[/tex] over the surface Σ of the sphere [tex]x^2 + y^2 + z^2 = 9[/tex] using the Divergence Theorem, set up and evaluate the triple integral in spherical coordinates:Flux = ∫₀²π ∫₀ᴨ ∫₀³ ([tex]3p^4[/tex] sin(φ)) dρ dθ dφ
To compute the flux of the vector field [tex]F(x, y, z) = x^3 i + y^3 j + z^3 k[/tex] over the surface Σ, which is the surface of the sphere [tex]x^2 + y^2 + z^2 = 9[/tex], we can apply the Divergence Theorem.
The Divergence Theorem states that the flux of a vector field across a closed surface is equal to the triple integral of the divergence of the vector field over the volume enclosed by the surface.
First, let's calculate the divergence of F:
div(F) = (∂/∂x)([tex]x^3[/tex]) + (∂/∂y)(y^3) + (∂/∂z)([tex]z^3[/tex])
= [tex]3x^2 + 3y^2 + 3z^2[/tex]
Now, we need to set up the triple integral using spherical coordinates.
In spherical coordinates, the volume element is given by [tex]dV = P^2[/tex] sin(φ) dρ dθ dφ, where ρ is the radial distance, θ is the azimuthal angle, and φ is the polar angle.
The surface Σ represents the boundary of the volume enclosed by the sphere. In spherical coordinates, the equation of the sphere [tex]x^2 + y^2 + z^2 = 9[/tex]becomes [tex]p^2 = 9[/tex].
The unit outward normal vector on the surface of the sphere can be expressed as n = (ρ/3)p, where p is the unit vector in the radial direction.
Using the Divergence Theorem, the flux (F · n) over the surface Σ is equal to the triple integral of the divergence of F over the volume enclosed by Σ:
Flux = ∭V (div(F)) dV
= ∭V ([tex]3p^2[/tex]) dV
= ∫₀²π ∫₀ᴨ ∫₀³ (3[tex]p^2[/tex]) [tex]p^2[/tex] sin(φ) dρ dθ dφ
Here, the limits of integration are as follows:
ρ: 0 to 3
θ: 0 to 2π
φ: 0 to π
Now, we can calculate the flux by evaluating the triple integral:
Flux = ∫₀²π ∫₀ᴨ ∫₀³ ([tex]3p^4[/tex] sin(φ)) dρ dθ dφ
Evaluating this triple integral will give us the flux of the vector field F over the surface Σ.
To know more about azimuthal, checkout
https://brainly.com/question/30524265
#SPJ4
where do elements in the human body tend to be located on the periodic table
The elements in the human body tend to be located in different regions of the periodic table. This is because the human body is made up of a wide range of elements, each with its own properties, uses, and functions. Overall, the elements in the human body tend to be located in different regions of the periodic table depending on their properties and functions.
Most of these elements are found in the first four rows of the periodic table, which are also known as the main group elements. These elements include hydrogen, carbon, nitrogen, oxygen, phosphorus, and sulfur, which are all essential for life. They are located in different regions of the periodic table, with hydrogen in the first row, carbon and nitrogen in the second row, oxygen in the third row, and phosphorus and sulfur in the fourth row. Other important elements in the human body include sodium, potassium, calcium, magnesium, iron, and zinc, which are located in the lower regions of the periodic table. Overall, the elements in the human body tend to be located in different regions of the periodic table depending on their properties and functions.
To know more about periodic table visit:
https://brainly.com/question/28747247
#SPJ11
what mass of h2 is needed to react with 8.75 g of o2 according to the following equation: o2(g) h2(g) → h2o(g)? (4 points) A. 0.547 g h2 B. 17.5 g h2 C. 1.10 g h2 D. 4.38 g h2
The mass of H2 needed is approximately 1.09 g.among the given options, the closest value is:C. 1.10 g H2
To determine the mass of H2 needed to react with 8.75 g of O2, we need to use the balanced equation and stoichiometry. The balanced equation is:
[tex]O_2(g) + 2H_2(g)[/tex] → [tex]2H_2O(g)[/tex]
From the equation, we can see that 1 mole of O2 reacts with 2 moles of H2. To calculate the mass of H2, we need to convert the mass of O2 to moles using its molar mass and then use the mole ratio to find the corresponding mass of H2.
1. Calculate the number of moles of O2:
Moles of O2 = Mass of O2 / Molar mass of O2
The molar mass of O2 is 32 g/mol.
Moles of O2 = 8.75 g / 32 g/mol
2. Use the mole ratio to find the moles of H2:
Moles of H2 = Moles of O2 × (2 moles H2 / 1 mole O2)
3. Calculate the mass of H2:
Mass of H2 = Moles of H2 × Molar mass of H2
The molar mass of H2 is 2 g/mol.
Now, let's perform the calculations:
Moles of O2 = 8.75 g / 32 g/mol ≈ 0.2734 mol
Moles of H2 = 0.2734 mol × (2 moles H2 / 1 mole O2) ≈ 0.5468 mol
Mass of H2 = 0.5468 mol × 2 g/mol ≈ 1.0936 g
Rounded to three significant figures, the mass of H2 needed is approximately 1.09 g.Among the given options, the closest value is:
C. 1.10 g H2.
Learn more about stoichiometry here:
https://brainly.com/question/28780091
#SPJ11
1. Complete the balanced dissociation equation for the compound below. If the compound does not dissociate, write NR after the reaction arrow.
(NH4)2S(s) -> ______
2. Write the balanced NET ionic equation for the reaction when Al(NO₃)₃ and Na₃PO₄ are mixed in aqueous solution. If no reaction occurs, write only NR.
Answer:
1. (NH₄)₂S(s) -----> NH₄+(aq) + S²-(aq)
2. Al³+ (aq) + PO₄³+ (aq) ----> AlPO₄ (s)
Explanation:
The dissociation of ammonium sulphide, (NH₄)₂S when dissolved in water is given in the equation below:
(NH₄)₂S(s) -----> NH₄+(aq) + S²-(aq)
However very little S²- ions are present in solution due to the very basic nature of the S²- ion (Kb = 1 x 105).
The ammonium ion being a better proton donor than water, donates a proton to sulphide ion to form hydrosulphide ion which exists in equilibrium with aqueous ammonia.
S²- (aq) + NH₄+ (aq) ⇌ SH- (aq) + NH₃ (aq)
Aqueous solutions of ammonium sulfide are smelly due to the release of hydrogen sulfide and ammonia, hence, their use in making stink bombs.
2. The reaction between aluminium nitrate and sodium phosphatein aqueous solution is a double decomposition reaction whish results in the precipitation of insoluble aluminium phosphate. The equation of the reaction is given below :
Al(NO₃)₃ (aq) + Na₃PO₄ (aq) ----> AlPO₄ (s) + 3 NaNO₃ (aq)
The net ionic equation is given below:
Al³+ (aq) + PO₄³+ (aq) ----> AlPO₄ (s)
relationship between temperature and flux in a carrier ionophore
The relationship between temperature and flux in a carrier ionophore is generally described by the Arrhenius equation, which relates the rate of a chemical reaction to temperature.
Relationship between temperature and flux in a carrier ionophoreIn the context of ionophores, which are molecules that facilitate the transport of ions across cell membranes, the flux refers to the rate or magnitude of ion transport.
According to the Arrhenius equation, the rate of a reaction or flux is exponentially dependent on temperature. The equation is typically represented as:
k = A * exp(-Ea / (RT))
In this equation, k represents the rate constant or flux, A is the pre-exponential factor, Ea is the activation energy, R is the gas constant, and T is the temperature in Kelvin.
Read mroe on ionophore here https://brainly.com/question/31707339
#SPJ4
The Henry's Law constant of methyl bromide, CH3Br, is k = 0.159 mol/(L atm) at 25C. What is the solubility of methyl bromide in water at 25C and at a partial pressure of 300. mm Hg? Choose one answer. a. 0.0628 mol/L b. 0.395 mol/L c. 0.403 mol/L d. 47.7 mol/L
The solubility of methyl bromide in water at 25°C and a partial pressure of 300 mm Hg can be calculated using Henry's Law. The Henry's Law constant for methyl bromide is given as 0.159 mol/(L atm) at 25°C. By applying the equation for Henry's Law, the solubility of methyl bromide in water can be determined.
Henry's Law states that the solubility of a gas in a liquid is directly proportional to the partial pressure of the gas above the liquid. The equation for Henry's Law is written as:
S = k * P
Where S is the solubility of the gas in the liquid, k is the Henry's Law constant, and P is the partial pressure of the gas. In this case, we are given the Henry's Law constant for methyl bromide as 0.159 mol/(L atm) at 25°C. The partial pressure of methyl bromide is given as 300 mm Hg.
Substituting the values into the equation, we have:
S = 0.159 mol/(L atm) * (300 mm Hg)
To convert mm Hg to atm, we divide by the conversion factor of 760 mm Hg/atm:
S = 0.159 mol/(L atm) * (300 mm Hg / 760 mm Hg/atm)
Simplifying the equation, we find:
S ≈ 0.0628 mol/L
Therefore, the solubility of methyl bromide in water at 25°C and a partial pressure of 300 mm Hg is approximately 0.0628 mol/L.To learn more about Henry's Law click here: brainly.com/question/30636760
#SPJ11
you assumed that you centrifuged the fe(iii)-oxalate solution for the correct amount of time; which means that there was no ca(ox) precipitate in the supernatant after it was centrifuged. what if ca(ox) was present in the solution? how would the result be affected (i.e., artificially high or low % mass of fe)?
If Ca(ox) precipitate was present in the solution after centrifugation, the result would be artificially low for the percentage mass of Fe.
Centrifugation is a technique used to separate solid particles from a liquid solution. In this case, the Fe(III)-oxalate solution was centrifuged to remove any solid precipitates, ensuring that only the supernatant (liquid portion) was analyzed.
If Ca(ox) precipitate was present in the solution, it would also be pelleted along with the Fe(III) precipitate during centrifugation. To determine the effect on the percentage mass of Fe, we need to consider the calculation used to determine the mass of Fe in the sample.
Assuming the experiment aims to determine the percentage mass of Fe in the Fe(III)-oxalate solution, the typical calculation involves measuring the mass of the Fe precipitate after it is dried and then dividing it by the initial mass of the sample.
Let's say the initial mass of the sample is M and the mass of the Fe precipitate obtained after drying is m(Fe). The percentage mass of Fe would be calculated as:
% mass of Fe = (m(Fe) / M) * 100
However, if Ca(ox) precipitate is present in the solution, it would contribute to the mass of the obtained precipitate. This would result in an artificially low measurement of the mass of Fe precipitate and, consequently, a lower percentage mass of Fe in the calculation.
If Ca(ox) precipitate is present in the Fe(III)-oxalate solution after centrifugation, it would lead to an artificially low percentage mass of Fe. The presence of Ca(ox) would contribute to the mass of the obtained precipitate, reducing the measured mass of Fe and affecting the overall calculation.
To know more about precipitate visit:
https://brainly.com/question/30386923
#SPJ11
What happens to the amount of carbon dioxide as the population increases?
Answer:
when population increases the amount of carbon dioxide also increases as population use oxygen and release carbon dioxide
Carbon dioxide is a major greenhouse gas. The increase in the population increases the carbon dioxide amount.
What is the relation between carbon and population?The main product released from the respiratory process of organisms, especially animals is carbon dioxide. The increase in their population will increase this product.
The increased population will increase the demand for the burning of fossil fuel, pollution, and respiration, and hence the product of these activities, carbon dioxide will increase in the atmosphere.
Therefore, the carbon dioxide will increase with an increase in the population.
Learn more about carbon dioxide and population here:
https://brainly.com/question/10153143
#SPJ2
.What is the pH of a 0.023 M HCl solution?
13. Gas A and gas B (both unreactive) are allowed to mix. The total pressure is found to be 3.50 atm. f gas B
was measured initially at 1.25 atm, what is the partial pressure of gas A?
a 4.75 atm
b. -2.25 atm
c.) 2.25 atm
d 1.25 atm
The partial pressure inside a gas mixture shall consist of the notional pressure of that constituent gas if the whole quantity of its starting material alone was occupied at the same temperature. The partial gas pressure is a measure of thermodynamic action in the particles of a gas, and the calculation can be defined as follows:
Given:
[tex]\to \bold{ P_T=3.50 \ atm}\\\\\to \bold{P_B=1.25 \ atm}\\\\[/tex]
To find:
partial pressure=?
Solution:
Using formula: [tex]\bold{P_T=P_A+P_B}\\\\[/tex]
[tex]\to \bold{3.50=P_A+1.25}\\\\\to \bold{P_A=3.50-1.25}\\\\\to \bold{P_A=2.25}\\\\[/tex]
As we know that pressure is not negative and as [tex]\bold{P_T}[/tex] is total pressure so, it has a large value, and[tex]\bold{ P_A , P_B}[/tex] is partial.
Therefore, the final answer is "Option C".
Learn more:
brainly.com/question/1417176
How many atoms are in 365 grams of CaCl2
Answer: 110
Explanation:
if 5.00 mol of hydrogen gas and 1.20 mol of oxygen gas react, what is the limiting reactant?
a. H2
b. O2
c. neither H2 or O2
how many moles of water are produced according to the equation?
Express your answer with the appropriate units.
nH2O=___
If 5.00 mol of hydrogen gas and 1.20 mol of oxygen gas react, the limiting agent is O₂.
The number of moles of water produced according to the equation is 1.20 mol.
To determine the limiting reactant, we need to compare the moles of hydrogen gas (H₂) and oxygen gas (O₂) and determine which reactant is present in a lower stoichiometric ratio.
From the information, we have:
Moles of H₂ = 5.00 mol
Moles of O₂ = 1.20 mol
The balanced equation for the reaction between hydrogen gas and oxygen gas to form water (H₂O) is:
2H₂(g) + O₂(g) -> 2H₂O(g)
According to the stoichiometry of the balanced equation, the ratio of H₂ to O₂ is 2:1. This means that for every 2 moles of H₂, we need 1 mole of O₂ to completely react.
Calculating the stoichiometric ratio for the given amounts:
Moles of H₂ / Coefficient of H₂ = 5.00 mol / 2 = 2.50 mol
Moles of O₂ / Coefficient of O₂ = 1.20 mol / 1 = 1.20 mol
Comparing the calculated stoichiometric ratios, we see that the mole ratio of H₂ (2.50 mol) is greater than the mole ratio of O₂ (1.20 mol). This means that the H₂ is in excess, and O₂ is the limiting reactant.
Therefore, the limiting reactant is O₂.
To determine the number of moles of water (H₂O) produced according to the balanced equation, we can use the stoichiometry:
For every 2 moles of H₂O, we need 1 mole of O₂. Since O₂ is the limiting reactant, the number of moles of H₂O produced is equal to the moles of O₂:
nH₂O = 1.20 mol
Therefore, the number of moles of water produced according to the equation is 1.20 mol.
Learn more about limiting reactant here, https://brainly.com/question/26905271
#SPJ11
What is the pH at the half-equivalence point in the titration of a weak base with a strong acid? The pKb of the weak base is 7.95.
a. 7.95
b. 8.75
c. 6.05
d. 5.25
Titration is the process of determining the amount of a substance in a solution by measuring the volume of a solution with a known concentration that is required to react with it. The answer to the given question is option d) 5.25.
In the titration of a weak base with a strong acid, the pH at the half-equivalence point can be calculated as follows: At the half-equivalence point, we have equal moles of the weak base and the strong acid. As a result, we get a solution that contains the weak base, its conjugate acid, and water. In the solution, there is an equilibrium between the weak base and its conjugate acid. This equilibrium has an acid dissociation constant, Ka. It's given by:
Ka = [H+][A–]/[HA]
The pKa is calculated by taking the negative logarithm of Ka:
pKa = -log(Ka)
At the half-equivalence point, [HA] = [A–] and the expression for pKa becomes:
pKa = -log([H+])
Therefore, the pH at the half-equivalence point is:
pH = 1/2 (pKb + pKa)
Given that pKb = 7.95 for the weak base, we can calculate the pKa:
pKw = 14 (at 25°C)
pKw = pKa + pKb
14 = pKa + 7.95
pKa = 6.05
Therefore, the pH at the half-equivalence point is:
pH = 1/2 (7.95 + 6.05)
pH = 1/2 (14)
pH = 7
At the half-equivalence point, the pH of the solution is equal to 7. Therefore, option d) 5.25 is incorrect.
To know more about concentration visit:
https://brainly.com/question/3045247
#SPJ11
The Kinetic Molecular Theory describes the behavior as well as the characteristics of an ideal gas. What are the five postulates of this theory? Provide at least 3 examples to describe these postulates.
Answer:
See explanation
Explanation:
The postulates of the kinetic theory of matter are;
Every substance is made up of tiny particles called molecules. Brownian motion and diffusion illustrates this fact.The molecules that compose matter are in constant random motion.There exists an attractive force between the molecules in matter. The attractive forces between gases are negligible. Solids have a definite shape and volume due to a high magnitude of intermolecular forces. Liquids have a volume but no definite shape due to weaker intermolecular forces. Gases have the weakest intermolecular forces hence the do not have both a shape and volume. They take on the volume of the container into which they are put. This illustrates this fact.The actual volume occupied by gas molecules is negligible relative to the volume of the container. The fact that gases are easily compressible illustrates this fact.Temperature is a measure of the average kinetic energy of the molecules of a body.
SO2 +
Li2Se →
SSe2 +
Li20
Type of Reaction:
We want to take inventory of the right and left side
Right: S=1 O = 2 Li = 2 Se= 1
Left: S= 1 Se=2 Li= 2 O=1
Lets balance out each side because we see we are off by 1 oxygen on the left
Add a coefficient of 2 on the Li2O
Add a coefficient of 2 on the right Li2Se
Now we have So2+ 2Li2Se ---> SSe2+ 2Li2O
or
The equation is already balanced, assuming that there is supposed to be a yields symbol between 2Li2Se and SSe2.
To find out whether or not this equation is balanced, make a little T-chart with the left side of the equation on one side and the left on the other. Next to each element, write down the amount they start off with and make changes as you add coefficients.
Hope this helps!
which type of chemical bond occurs when atoms share electrons, as shown in this diagram? choose one: a. covalent b. metallic c. ionic d. polarity
The chemical bond that occurs when atoms share electrons is called a covalent bond. A covalent bond is a chemical bond that occurs when two or more atoms share electrons. This can happen when two or more atoms come together to form a molecule.
In a covalent bond, the electrons that are shared between the atoms are held together by a strong force. This force is called a covalent bond. The strength of the covalent bond depends on how many electrons are being shared and how strong the attraction between the atoms is. A covalent bond can be polar or nonpolar. A polar covalent bond occurs when there is an uneven sharing of electrons between the atoms. In this type of bond, one atom will have a stronger pull on the electrons than the other. This results in a partial positive charge on one atom and a partial negative charge on the other.
A nonpolar covalent bond occurs when the electrons are shared equally between the atoms. This results in no partial charges on the atoms. Overall, covalent bonds are important in the formation of many important molecules in the body and in the environment. The length and strength of a covalent bond depend on several factors. For example, the number of electrons shared between the atoms and the distance between the atoms can affect the strength of the bond. Similarly, the type of atoms involved in the bond can affect its strength.
know more about covalent bond,
https://brainly.com/question/19382448
#SPJ11
Use standard free energies of formation to calculate ΔG∘ at 25 ∘C for the following reaction and predict if the reaction will be spontaneous
at this temperature under the standard conditions.
3H2(g)+Fe2O3(s)→2 Fe(s)+3H2O(g)
At 25 ∘C, the calculated value of ΔG∘ for the reaction 3H2(g) + Fe2O3(s) -> 2Fe(s) + 3H2O(g) is 138.4 kJ/mol. Since ΔG∘ is positive, the reaction is non-spontaneous under standard conditions at this temperature. A positive ΔG∘ indicates that the reaction requires energy input to occur.
To calculate ΔG∘ at 25 ∘C for the reaction 3H2(g) + Fe2O3(s) -> 2Fe(s) + 3H2O(g) using standard free energies of formation, we need to subtract the sum of the standard free energies of formation of the reactants from the sum of the standard free energies of formation of the products.
The standard free energies of formation for the given compounds at 25 ∘C can be looked up in reference tables. The values are as follows:
ΔG∘f(H2(g)) = 0 kJ/mol
ΔG∘f(Fe2O3(s)) = -824.2 kJ/mol
ΔG∘f(Fe(s)) = 0 kJ/mol
ΔG∘f(H2O(g)) = -228.6 kJ/mol
Using these values, we can calculate ΔG∘ for the reaction:
ΔG∘ = (2 * ΔG∘f(Fe(s)) + 3 * ΔG∘f(H2O(g))) - (3 * ΔG∘f(H2(g)) + ΔG∘f(Fe2O3(s)))
ΔG∘ = (2 * 0 kJ/mol + 3 * (-228.6 kJ/mol)) - (3 * 0 kJ/mol + (-824.2 kJ/mol))
ΔG∘ = -685.8 kJ/mol + 824.2 kJ/mol
ΔG∘ = 138.4 kJ/mol
At 25 ∘C, the calculated value of ΔG∘ for the reaction 3H2(g) + Fe2O3(s) -> 2Fe(s) + 3H2O(g) is 138.4 kJ/mol. Since ΔG∘ is positive, the reaction is non-spontaneous under standard conditions at this temperature. A positive ΔG∘ indicates that the reaction requires energy input to occur.
To know more about non-spontaneous reaction visit:
brainly.com/question/14871600
#SPJ11