Which of these are steps in the testing cycle? Check all of the boxes that apply.

testing the fixed code

releasing debugging version

fixing the error

reproducing and diagnosing the error

Answers

Answer 1

Answer:

A,C and D

Explanation: You're welcome

Answer 2

Answer:

A and D

Explanation:


Related Questions

what is the purpose of the new window command

Answers

Answer:

.

Explanation:

Answer:

It opens one of the current worksheets into a new window.

Explanation:

got it correct

You are troubleshooting an issue where a PC can reach some hosts on the Internet (using either DNS name or IP address), while several other hosts on the Internet are not reachable. From the PC you can Ping all devices on your local subnet. What is most likely causing the problem?

Answers

The options are missing from the question,below are the options to choose from;

A) incorrect (or missing) routes in a routers routing table

B) incorrect DNS configuration on the PC

C) incorrect default gateway configuration on the PC

D) duplicate IP addresses on your LAN

Answer: The correct answer to the question is option A

INCORRECT (OR MISSING) ROUTES IN A ROUTERS ROUTING TABLE.

Explanation: When it is possible for a PC to ping some devices but not actually all,we can then make an assumption that either it has a wrong subnet that is configured or the router from the path to the remote device actually has an incorrect or a missing routes to the device.

If a student passes off an author’s work as his or her own, the student has

Answers

Plagiarism is the answer

2. Write the output of:
a) CLS
A= 10
B = 20
C = 30
S=A+B+C
Av=S/3
Print "sum is:",s
Print "Average is:", Av
End​

Answers

sum is 60 (add a b and c together)
average is 20 (divide 60 by 3)

This elementary problem begins to explore propagation delay and transmis- sion delay, two central concepts in data networking. Consider two hosts, A and B, connected by a single link of rate R bps. Suppose that the two hosts are separated by m meters, and suppose the propagation speed along the link is s meters/sec. Host A is to send a packet of size L bits to Host B

a. Express the propagation delay, dprops in terms of m and s

b. Determine the transmission time of the packet, drans, in terms of L and R.

c. Ignoring processing and queuing delays, obtain an expression for the end-

d. Suppose Host A begins to transmit the packet at time t = 0. At time t = dtrans'

e. Suppose drop is greater than dran . At time t = d, ans, where is the first bit of

f. Suppose dprop is less than dtrans. At time t = dtrans, where is the first bit of

g. Suppose s = 2.5-108, L = 120 bits, and R = 56 kbps. Find the distance m so that dprop equals drans

Answers

Answer:

A. dprops = m /s seconds.

B. drans = L / R seconds.

C.  delay(end −to−end) =  (m /s + L / R) seconds.

D. The bit has just been sent to Host B or just left Host A.

E. The first bit is in the link and has not reached Host B.

F. The first bit has reached Host B.

G. m = 535.714 km.

Explanation:

The transmission time or delay of packets in a network medium is the packet size L, divided by the bit rate R (in seconds). The propagation time or delay is the ratio of the distance or length of the transmission cable, m, and the propagation speed of the cable, S (in seconds).

The end-to-end delay or the Packet delivery time is the total delay in transmission, which is the sum of the propagation delay and the transmission delay.

To get the distance where the propagation delay is equal to the transmission delay;

distance (m) = L /R  

= (120/56 ×10^3) 2.5 ×10^8   = 535.714 km

Suppose that one of the following control signals in the single-cycle MIPS processor has a stuck-at-0 fault, meaning that the signal is always O, regardless of its intended value. What instructions would malfunction? Why? (a) RegWrite (b) ALUOp1 (c) MemWrite Repeat for all three signals (a) to (c) above, assuming that the signal has a stuck-at-1 fault.

Answers

Answer:

Explanation:

RegWrite:

• All R-type instructions, lw and addi:

• The result of the operation/load/addition would not be written back to the destination register

• ALUOP

• The following R-type instructions: add, sub, and, or, slt

• With ALUOp stuck at 0, the ALU decoder would interpret all those instructions as either add or subtract operations. The ALUOp gets decoded to add or subtract depending on ALUOp[0].

• MemWrite:

• Only sw is affected.

• The memory write won’t take place.

What is the extension of Qbasic ?​

Answers

Answer:

bas

Explanation:

Write a function that converts a string into an int. Assume the int is between 10 and 99. Do not use the atoi() or the stoi() function.

Answers

Answer:

Written in C++

#include <iostream>

#include <sstream>

using namespace std;

int main()  {

   string num;

   cout<<"Enter a number: ";

   cin>>num;

   stringstream sstream(num);

   int convertnum = 0;

   sstream >> convertnum;

   cout << "Output: " << convertnum;

}

Explanation:

Without using atoi() or stoi(), we can make use of a string stream and this is explained as follows:

This line declares a string variable num

   string num;

This line prompts user for input

   cout<<"Enter a number: ";

This line gets user input

   cin>>num;

This line declares a string stream variable, sstream

   stringstream sstream(num);

This line declares and initializes the output variable, convertnum to 0

   int convertnum = 0;

The stream is passed into the output variable, convertnum

   sstream >> convertnum;

This line displays the output

   cout << "Output: " << convertnum;

Note that: if user enters a non integer character such as (alphabet, etc), only the integer part will be convert.

For instance,

40a will be outputted as 40

how is the information technology Career Cluster different from the others clusters?

Answers

Answer:

All career clusters use information technology in carrying out their work.

Explanation:

How is the Information Technology career cluster different from most other clusters?

All career clusters use information technology in carrying out their work.

I saw this on quizlet, hope this helps!

Which kind of storage has a spinning platter?

magnetic hard disk

O server

O solid state hard disk

O cloud

Answers

Answer:

Magnetic hard disk

Explanation:

The type of storage that has a spinning platter is called MAGNETIC HARD DISK reason been that MAGNETIC HARD DISK are made up of one or more disks that are been covered with a magnetic coasting or magnetic material to help store information or data permanently on a desktop or a computer and lastly this type of disks help to read data and as well write and rewrite data.

Using Python Write an expression using Boolean operators that prints "Special number" if special_num is -99, 0, or 44.

Sample output with input: 17
Not special number

Answers

special_num = int(input())

if special_num == -99 or special_num == 0 or special_num == 44:

   print("Special number")

else:

   print("Not special number")

I wrote the code so that the user enters a number of their choice. Best of luck.

Any suggestions on how to write the following Python code?


1. Write a Python code to save the following list in a CSV file

ls = [“Hello”, “Hi”, “bye”]

2.Write a Python to read the CSV file generated in the previous step (1) to a Python list.

Help would be much appreciated.

Answers

Answer:

Hi

Explanation:

meaning of leanness in organization​

Answers

Answer:It is an organizational structure that is designed to create more customer value using fewer resources than a traditional organisational structure

Please help I don’t know

Answers

Answer: Go down 1 time, then to the left 3 times, then down 1, finally, go left 1 time.

Explanation:

If a function receives an object as an argument and needs to change the objects member data, the object should be:_____________.

Answers

Question

If a function receives an object as an argument and needs to change the objects member data, the object should be:_____________.

A) passed by constant reference

B) passed by reference

C) passed by value

D) none of the above

Answer:

The correct answer is B)

Explanation:

The above question relates to computer programming.

Passing by reference is the same and can be used interchangeably with  passing by address.

A special ID used by a computer's procesing unit for recording or tracking data is referred to as a memory address.

When the memory address of a calling function is passed on to the function, the function is said to have been passed by address or reference.

This enables changes to be made to the function or argument directly from the parameter.

Cheers

Which traits are common in all four career pathways of the Information Technology field? Check all that apply.

A)accuracy and attention to detail
B)problem-solving and critical-thinking skills
C)knowledge of programming language
D)ability to work independently
E)ability to protect confidential information
F)ability to learn quickly

Answers

I would say all of the above

Answer:

Abcd

Explanation:

What are the ten main components of a report that would be delivered at the end of a data science project?

Answers

Answer:

The answer is below

Explanation:

The ten main components of a report that would be delivered at the end of a data science project are the following:

1. Cover page: the involves elements such as the title of the project, the name of the author, name of institution, date of publication

2. Table of Contents: this comprised information like chapters, topics, and subtopics

3. Abstract: a summary of the whole project

4. Introductory Section: a brief background study

5. Methodology section: this describes the methods used in gathering and analyzing the data

6. Data section: this shows the data gathered for the project. It is mostly represented in tables, histograms, pie charts, etc.

7. Analysis section: this describes what was analyzed

8. Result section: this described the outcome of the analysis

9. Conclusion section: this describes the whole outcome of the data project and what the author derived or concluded.

10. References: this describes the information about the works of other authors, the author used in building his background knowledge towards his data science project.

How goes design again ones attention?

Answers

Answer:

the only thing i could think of is creating a different way to get someone to pay attention to you like maybe instead of shouting or tapping on ones shoulder maybe try to ask the person closest to them to get their attention for you. or by doing something extremely impressive or distracting

Explanation:

In the Allow list box in the Data Validation dialog box,the _____ option means that the cell will accept only times.A) ChronologyB) ClockC) TimeD) Calendar

Answers

Answer:

C) Time

Explanation:

Given that Data validation is a feature in Microsoft Excel in which a user used to specify or determines the type of value or characters that can be typed or entered into a cell.

For example, using data validation to ensure a value of a number is whole numbers, or to ensure character entry is less than 25 characters.

Hence, in this case, the correct answer is the TIME option, will only result in cell accepting only times.

Which of the following represent the use of formatting to create readable code?
Choose all that apply.

Line breaks are used to separate every ten lines of code.

Line breaks are used to separate segments of code.

Indentation is used to create a pattern that is easy to follow.

Indentation is used to make it easier to follow the flow of logic in the code.

Answers

Answer:

The true statements are:

Line breaks are used to separate segments of code.

Indentation is used to create a pattern that is easy to follow.

Indentation is used to make it easier to follow the flow of logic in the code.

Explanation:

Line breaks and indentation are used to increase the readability of a program. The coding formatting is done using the line breaks and indentation to separate segments of code so that the code is easier to read.

Hence,

The true statements are:

Line breaks are used to separate segments of code.

Indentation is used to create a pattern that is easy to follow.

Indentation is used to make it easier to follow the flow of logic in the code.

Answer:

b and d

Explanation:

uestion
7. If you want to learn how to perform an action, which feature of the Excel window should you use?

A. Quick Access toolbar
B. Tell Me box
C. Status bar
D. File tab

Please help ASAP

Answers

Answer:

B- tell me box

Explanation:

It tells you how to do something you don’t know how to do

What is output?

C = 1
sum - 0
while (c < 10):
c = c + 3
sum = sum + c

print (sum)​

Answers

11

Explanation:

Please make me Brainliest

E-mails could possibly cause harm to computers due to which of the following?
A.Allow for misunderstandings
B.Carrying viruses
C.Updating system preferences
D.Allowing for global use

Answers

D or b
I’m pretty sure sorry if I’m wrong

E-mails could possibly cause harm to computers due to carrying viruses option (C) is correct.

What is a computer?

A computer is a digital electronic appliance that may be programmed to automatically perform a series of logical or mathematical operations. Programs are generic sequences of operations that can be carried out by modern computers.

As we know,

You receive emails every day with papers, pictures, or other electronic files attached. These files can occasionally include harmful viruses, Trojan horses, or malware that has been purposefully provided by someone looking to inflict harm or steal confidential personal data.

Thus, E-mails could possibly cause harm to computers due to carrying viruses option (C) is correct.

Learn more about computers here:

brainly.com/question/21080395

#SPJ2

express cards functionalities​

Answers

Answer:

ExpressCard, initially called NEWCARD, is an interface to connect peripheral devices to a computer, usually a laptop computer. The ExpressCard technical standard specifies the design of slots built into the computer and of expansion cards to insert in the slots.

Are the blank space around the edges of the page

Answers

Answer:

The blank space around the edges of a sheet of paper — as with the page of a book — that surrounds the text is called the margin.

How does natural gas move through pipelines from the well head to the end user thousands of miles away

Answers

It’s the large compressors that are pumping and working together through the different stations ... They move the gas through the pipelines which they’re under high pressure.


Martin is responsible for translating the script into a visual form by creating a storyboard. Which role is he playing?
Martin is playing the role of a(n)

Answers

Answer:

The correct answer to this question is given below in the explanation section.

Explanation:

The question is about to  identify the role of Martin, who converts script into visual form by creating a storyboard.

The correct answer to this question is:

Martin is playing the role of Production Design and he is working at the position of the production designer.

Before shooting a film, the production designer is the first artist who converts script into a visual form such as creating storyboards. And, that storyboard serves as the first film draft.

A storyboard is a series of sketches, paintings, etc arranged on a panel to show the visual progress of the story from one scene to the next.   These storyboards are used from start to finish of the film. Because these storyboards or sketches serve as the visual guide for the director of the film throughout the production.  

Answer:

Hi

Explanation:

THE ANSWER UP TOP IS WRONG LIKE DEAD WRONG

PLS HELP IF U KNOW A LOT ABT SOCIAL MEDIA

Idk what’s going on with Pinterest but I can’t follow ppl, dm ppl or comment on stuff and it says an error (attached image) what can I do to fix this? Also I’ve tried logging in and out and I’ve tried deleting the app. Btw it’s on a business account

Answers

Answer:

Its probably your computer

Explanation:

Try restarting, shutting down and starting back up your computer/laptop. Or just move to a different device.

While working on a customer issue, your colleague calls and asks for help to resolve his issue. What should you do?A. Go ahead and resolve his situation first B. Request the colleague to call after sometime C. Work on both the issues at the same time D. Tell your colleague to work on his own.

Answers

Answer:

Request the colleague to call after sometime

Explanation:

While working on a customer issue, your colleague calls and asks for help to resolve his issue. What should be done is to "Request the colleague to call after some time."

This is because,e in situations like that, it is believed that the customer should come first, and that is the purpose of being there. For employee to serve the customer. A colleague can easily link up with other employees to get his issues sorted, or simply wait.

what are the principle elements of public key cryptosystem​

Answers

Answer: Components of a Cryptosystem

- Plaintext. It is the data to be protected during transmission.

- Encryption Algorithm. ...

- Ciphertext. ...

- Decryption Algorithm, is a mathematical process, that produces a unique plaintext for any given ciphertext and decryption key. ...

- Encryption Key. ...

- Decryption Key.

Explanation:

Other Questions
Is any one on here from laurens middle Everywhere on Earth has a . We write a global address using two numbers. They are called . The global address of a place can be found on a map called a map. The equator, the prime meridian, and the International date line are three imaginary lines on our globe. Lines of Latitude run East and West. They are parallel lines that run to the Equator. The Equator's latitude is degrees. Lines of Longtidue run . They are lines that run to the Prime Meridian and the International date line. The Prime Meridian's longitude is degrees and the Interanational date line's longitude is degrees. Did you know that our global address is ? When we write latitude and longitude, we always put the first and the last. Lines that run east and west (left and right on the globe) show lines of . Lines that run north and south (up and down on the map) show lines of . fwwweeeee brain for u and everybody What role do entrepreneurs play in a free enterprise system?O A. They determine how property rights should be enforced.O B. They create economic regulations to protect citizens.O C. They produce innovative new goods and services.O D. They operate government businesses to compete withcorporations. Which of the following statements best describes the rate at which land subsidence is occurring in Mexico City?A.The land has subsided about 10 feet in the last 100 years, and the rate is staying the same.B.The land has subsided about 10 feet in the last 100 years, and the rate is increasing.C.The land has subsided about 30 feet in the last 100 years, and the rate is decreasing.D.The land has subsided about 30 feet in the last 100 years, and the rate is increasing.Please select the best answer from the choices providedABCDThe answer is D. Compare the numbers should I cover for my coworker who sneaks out In what way did the Spanish Reconquista relate to the Spanish conquest of the Americas? 1. The conquest of the Americas was an extension of how the Spanish conquered more land during the Reconquista. 2. The Reconquista convinced Spanish missionaries to avoid trying to convert Native Americans to Catholicism. 3. The Reconquista triggered a burdening overpopulation in Spain that only new conquests could resolve. 4. The most adept military leaders refused to go to the New World so they could continue the Reconquista. Please Help!!! how do you use MLA format for a website when citing in a essay ? Which phrase from paragraph 10 helps the reader understand themeaning of the phrase "trailblazing women" in paragraph 11? Research two of the missions in California, Texas, New Mexico. Write short report about what you learn. Include information on the founders, history, and activities and life of the mission Which expression does the number line represent?NA014243495464744849Save and ExitNextSun Help me please!!REALLY FAST PLEASE 88) 4 times a number decreased by 8 equals 40A) x=80 B) x = 40 C) x=8D) x = 12 The trade networks described by the two sources were most strongly influenced by: Whats da answer yalll I need help ... How were the gods of ancient Egyptians and the Aztecs alike? The CEO of Tough Mudder believes that teams in his company are not working as effectively as they could, and he is asking you for advice. Provide the best answer to his question. "A new team we just formed to explore expanding into the Mediterranean and Middle East seems to have split into three factions around what kinds of events to host and what kinds of customers to target, and communication is sometimes not respectful. How can the manager help the team move beyond this?" The manager should encourage team members to share personal information and get to know one another better. The manager should make sure that both the task specialist and socioemotional roles are being performed on the team. The manager should encourage everyone to participate in discussions by stating their underlying interests rather than demands for specific outcomes. The manager should encourage a high level of task conflict and relationship conflict so team members can work out all their differences. On the one hand, a gerund is a verb that acts as a noun, know for the -ing form. On the other hand, an infinitive is the basic form of a verb, that usually follows "to" or another verb form. The revised sentence, including both of these, is: "To give is one of the best things people can do. Volunteering their time shows what caring people they are." 89.36 in word form i have it in expanded form not word form though pls help ??????????????????????????????????????????????????????????????????????///