Answer: B. number = random.randit (1, 50)
add comments to each line of the following mips code and describe in a sentence or two what it computes. assume that $a0 is used for the input and initially contains n, a positive integer. assume that $v0 is used for returning the output value. begin: addi $t0, $zero, 0 // addi $t1, $zero, 1 // loop: slt $t2, $a0, $t1 // bne $t2, $zero, finish // add $t0, $t0, $t1 // addi $t1, $t1, 2 // j loop // finish: add $v0, $t0, $zero
$v0 is the sum of the odd positive integers 1 + 3 + 5 + … which are less than or equal to n.
#t0=sum=0
#t1=i=1
# (n<i)? or (i>n)?
# exit loop if (i>n)
# sum = sum + i
# i = i + 2
# repeat loop
# result = sum
What is positive integers?
A number with a decimal (or fractional) portion equal to zero is referred to as an integer, also known benefit of the entire number, in algebra. The positive whole numbers, negative whole numbers, and the number zero make up the set of integers. Positive whole numbers will be the main topic of this lesson. A whole number that is greater than zero is what is meant by the term "positive integer." All counting numbers are included in the set of positive integers (that is, the natural numbers). A collection (collection of objects) whose components are numbers is known as a number set. All whole numbers on the number line to the right of zero are included in the set of positive integers.
To learn more about positive integers
https://brainly.com/question/15721221
#SPJ4
when constructing a structure that has a substantial mass such as dams, large bridge piers, etc., which type of concrete should be specified?
The correct answer is to onstructing a structure that has a substantial mass such as dams, large bridge piers, is type IV .
Less dependent on cement type, blended cement (PPC or PSC) is preferred, but OPC is typically used to achieve required strength at different ages to fulfill structural requirements with low cement content per unit of concrete. Concrete design plays a significant role in mass concrete applications like dams.
To learn more about type IV click the link below:
brainly.com/question/14089640
#SPJ4
usgs stream-gauging stations record water depth, , and channel in order to calculate the discharge of the stream.
USGS stream-gauging stations record water depth and velocity and channel width in order to calculate the discharge of the stream.
Water discharge is used as a support for people's lives in the form of liquid substances. Water has the most important role in human needs. Water discharge is very closely related to time & volume. Water discharge is the velocity of the flow of liquid through the cross-sectional distance per unit time. Water discharge uses volume units per time or ml/second, liters/second, m³/second, liters/hour, m³/hour, and various other units. Discharge units are often used in monitoring the capacity (capacity) of water in rivers or dams so that the existing water can be controlled.
Learn more about Water discharge here brainly.com/question/25727077
#SPJ4
How is the national saving in an open economy calculated?
The national savings in an open economy is calculated by adding private savings, public savings, and net capital inflows.
What is economy?
The creation, distribution, and exchange of goods and services, as well as their consumption, constitute the economy. It is broadly defined as a "social realm emphasising actions, discourses, and material expressions associated with the development, use, and management of finite resources." A given economy is a set of activities with primary variables such as culture, values, education, technological evolution, history, social organisation, political structure, legal systems, and natural resources. These factors provide context and content, as well as the conditions and parameters that govern an economy. Alternatively, the economic sphere is a social world of interconnected human activities and transactions that does not exist in isolation.
To learn more about economy
https://brainly.com/question/511497
#SPJ1
regarding the hazardous mechanical motions of all machines, and the dangers they present what is the first step
Answer:
so it would be recognizing them
Explanation:
Hazardous Motions—including rotating machine parts, reciprocating motions (sliding parts or up/down motion), and transverse motions (materials moving in a continuous line). Points of Operation—the areas where the machine cuts, shapes, bores or forms the stock being fed through it.
technician a says that ball joints must be unloaded when checking them for wear. technician b says that ball joints must be loaded when checking them for wear. who is correct?
Technician A is right that unloading ball joints is necessary before inspecting them for wear.
Ball joints are a crucial component of the suspension system that are included in almost every contemporary automobile's suspension. They are one of the key pivot points in the suspension system that join the vehicle's control arms to the steering knuckles or spindles. In addition to allowing the front wheels and suspension to move forward and backward when the driver turns the steering wheel and the vehicle travels over irregularly paved roads, the front ball joints also permit the front suspension to move up and down.
The majority of modern ball joints aren't repairable and last the lifetime of your automobile. However, because ball joints are so critical to your suspension system, it's necessary to know how to check them and how to spot any potential problems. It's advised to repair the damaged ball joint together with its pair if you do find a problem with one of the ball joints. This is due to the likelihood that the other side will shortly follow when one ball joint begins to fail.
Learn more about Ball joints here:
https://brainly.com/question/13673009
#SPJ4
What are the relative amplitudes of the fourth pair of sidebands for an FM signal with a deviation ratio of 8?
The relative amplitude of the fourth pair of sidebands for an FM signal with a deviation ratio of 8 is -0.1.
What is relative amplitude?The above result is obtained by reading the (Look Up Table) LUT Indexing. LUT is an abbreviation for "Look-Up-Table," which is essentially an indexed collection of integers. LUTs are commonly used in Machine Vision to change pixel values in a specified manner.
The relative amplitudes /0 of all resistance peaks are shown as a function of pressure. Amplitude is defined as the half-distance between the envelope of oscillations at the impedance maximum (N) and minimum (N + 1/2).
In physics, the amplitude is the maximum displacement or distance moved by a point of a vibrating body or wave when measured from its steady state. It is half the length of the vibrational path.
LUTs allow you to route image data by transforming input pixel values into a series of output values. Instead of conducting mathematical operations on each pixel in the image, the grey value is mapped in a look-up table in a fraction of the time it would take to analyze each pixel individually.
Learn more about Relative Amplitude:
https://brainly.com/question/14809380
#SPJ1
The water in a large lake is to be used to generate electricity by the installation of a hydraulic turbine–
generator at a location where the depth of the water is 50 m (Fig. below). Water is to be supplied at a rate of
5000 kg/s. If the electric power generated is measured to be 1862 kW and the generator efficiency is 95
percent, determine:
(a) the overall efficiency of the turbine–generator,
(b) the mechanical efficiency of the turbine, and
Energy, Energy Transfer, and General Energy Analysis
Example
c)the shaft power supplied by the turbine to
the generator.
From the prompt above, calculations show that:
the overall efficiency of the turbine–generator is 76%the mechanical efficiency of the turbine is 72%; The power of the shaft supplied by the turbine to the generator is 1, 768.9 kW.What is overall efficiency?The yearly total of electricity and mechanical energy generation and usable heat output divided by the fuel input required for heat produced in a cogeneration process and total electricity and mechanical energy production is referred to as overall efficiency.
To arrive at the above results:
Recall that:
Depth of water h = 50m
The Mass flow rate of water, m = 5000kg/s
Generated electric power, P = 1862
Generator efficiency n = 95%
i) To solve overall efficiency we have the expression:
Overall Efficient (Oe) = P/Power generated due to the potential energy of water that is stored (Pw)
Oe = P/Pw x 100% ...........................1
Recall that Potential Energy is given as:
PE = mgh
Hence, Pw - mgh
Plugging in values from the above expression
Pw = 5000 x 9.81 x 50
Pw = 2452500
Pw = 2452.5 kW
Plugging in the values into (1)
Overall Efficiency (Oe) = [1862/ 2452.5] * 100 %
Oe = 0.75922528032
Hence, Overall Efficiency (Oe) [tex]\approx[/tex] 76%
ii) To solve for mechanical Efficiency the formula is given by:
Mechanical Efficiency (Me) = [ Power of Shaft (Ps)/ Potential Energy of Water (Pw)] x 100% ..............................................(2)
In this case, the formula or expression for power generated (Pg) is:
n = Ps/Pg; Making Ps subject of the expression, we have,
Ps = Pg * n
Inputting the values, we have:
Ps = 1862 x 0.95
Ps = 1768.9 kW
Plugging the above into equation 2, we have:
Me = (1768 / 2452.5) x 100%
Me = 0.72089704383
Me [tex]\approx[/tex] 72%
iii) since the shaft power (Ps) is generated by the turbine to the generated, which is already computed in part ii above,
Power of the Shaft (Ps) = 1768.9kW
Learn more about overall efficiency:
https://brainly.com/question/13002418
#SPJ1
Given an AVL tree containing N positive integers, print out all the even values contained in the tree in descending order (e.g. 12, 8, 6, 2). Be sure to explain how you will get descending order. Explanation
Since we need to print it in Descending Order, For printing we need to traverse the "N" nodes atleast once.
And we need to perform reverse Inorder traversal to get the nodes in Descending Order. Hence the total time complexity is O(N).When you pick up the pages, they are in reverse order because printers typically print the first page first and the last one last. To reverse the order, click the Print button after selecting the menu option in the window's top right corner. Check Reverse in the Copies section of the General tab of the Print window. An extra argument for the sort() method is the reverse parameter. The list is sorted in descending order when reverse is set to True. The placement of numbers in ascending order is from smallest to largest. The digits 3, 15, 28, 49, for instance, are listed in ascending order. An arrangement of numbers in descending order is from largest to smallest. For instance, the digits 45, 32, 26, and 12 are listed in decreasing sequence.
Learn more about print here:
https://brainly.com/question/4440010
#SPJ4
A 5/16-24 unf 2b hole needs to be machined on a part. What drill size or letter should be selected to drill the pilot hole for the tap?
The correct answer is tap drill size calculator for thread size from 0.060 to 2 inch including 2-56, 4-40, 6-32, 8-32, 10-32, 1/4, 5/16, 3/8, 1/2, 5/8 and 3/4.
Typical drill bits have markings somewhere on the shank above the threads. It's small, but it usually has the drill-bit diameter stamped into the metal; the number is written in fractions. For example, the markings may read: 1/4-inch, 3/6-inch or 25/32.General-use drills have the most common chuck size of 3/8-inch to accommodate the majority of drill bits. The most powerful cordless drill would have a 1/2-inch chuck for heavy-duty applications while light-duty tools have fixed 1/4-inch size.
To learn more about drill size click the link below:
brainly.com/question/28360581
#SPJ4
A steel which has been rapidly cooled from Austenite to room temperature and then is reheated for a few (2-3) hours at a moderate temperature (-400 C) will be undergoing which process? a. Annealing b. Spheroidizing c. Tempering d. Normalizing e. Carburizing
Tempering rapid cooling is used to make steel hard.
What is steel?
Iron, which has a hardness similar to copper in its pure form, is a key component of steel. With the exception of very rare instances, iron is polycrystalline, like all other metals, which means that its crystals are connected at their boundaries. A well-ordered arrangement of atoms, best represented as contacting spheres, makes up a crystal. They are arranged in planes, referred to as lattices, that pierce one another in particular ways. For iron, a unit cube containing eight iron atoms at its corners serves as the finest representation of the lattice structure. The allotropy of iron, or its existence as two crystalline forms, is significant for the distinctiveness of steel.
To learn more about Steel
https://brainly.com/question/28782967
#SPJ4
the relative costs to find and repair an error or defect increase dramatically as we go from prevention to detection to internal failure to external failure costs.:
Prevention costs are the costs incurred to keep errors and defects from happening in the first place. These costs include things like design reviews, process audits, and training.
What is Prevention costs?
As part of the cost of quality, prevention expenditures are incurred in order to avoid product faults. Employee training & supplier certification are typically included in the cost of prevention. Generally speaking, preventing defects is what leads to the biggest increases in product quality. Even while such prevention entails additional expenses, these expenses are typically more than offset by savings linked to a decline in the frequency of defects. In the past, it was frequently thought that at some non-zero amount of defects, overall quality costs would be reduced. However, a belief that supports the objective of zero flaws has largely supplanted that one. This novel idea is supported by the observation that failure costs frequently reduce dramatically in response to tiny increases in prevention cost.
Detection costs are the costs incurred to find errors and defects once they have already occurred.
To learn more about Prevention costs
https://brainly.com/question/15093775
#SPJ4
A day of the week is chosen and a month is chosen at random. What is the probability of choosing Saturday and a months that begins with the letter J?
The probability of choosing Saturday and a months that begins with the letter J is 1/28 (3.57%).
What is the probability?A day of the week is chosen and a month is chosen at random.the probability of choosing Saturday and a months that begins with the letter J is
3 months (January, June, July that start with J)
12 Months (number of possible outcomes)
Probability of choosing a J month is 3/12 = 1/4 (or 25%). Probabilities are denoted by fractions, decimals, or percentages.
one Saturday
seven days a week
Probability of choosing Saturday is 1/7 = (14.28%).
The likelihood of both events occurring simultaneously is 1/4 X 1/7 = 1/28 (3.57%).
The probability of choosing Saturday and a months that begins with the letter J is 1/28 (3.57%).
To learn more about probability refer to:
https://brainly.com/question/24756209
#SPJ4
Write a game_setup function that does the following: 1. Creates a numpy array representing the 3 doors 2. Creates a numpy array representing the prizes (0 for goat and 1 for car). You should randomly choose one of the elements of the prize array to be a car and the others should be goats. 3. Your function should return the arrays of doors and prizes
A game_setup function,
def game_setup():
doors = np.array([1, 2, 3])
prizes = np.array([0, 0, 1])
np.random.shuffle(prizes)
return doors, prizes
What is function?
The fundamentals of Python functions, including who they are, their syntax, their primary parts, return keywords, the major types, will be covered in this course. Additionally, we'll examine several examples of Python function definitions. A function is a group of connected claims that together carry out a mathematical, analytic, or evaluative activity. Python functions are easy to define and crucial for programming at the intermediate level. The same standards apply to variable names and function names. The objective is to define a function by grouping together a few often performed actions. We can call the function and reuse the code contained within it using different variables rather than repeatedly writing the same code block for different input variables.
To learn more about function
https://brainly.com/question/17216645
#SPJ4
procedure in this activity you will identify the centroid location of common and complex shapes using object symmetry, mathematics, and mdsolids software. calculate and label the centroid location calculate, label, and dimension the x and y components. indicate the location of the centroid using the symbol.
It is extremely simple to determine the centroid of a form like a circle or square.The intersection of a triangle's three medians is where the triangle's centroid is found.
Calculate the centroid location ?It is regarded as one of the triangle's three points of concurrency—the incenter, circumcenter, and centroid.Within a triangle is where the centroid is located. The geometric center, however, only serves to indicate the centroid for an object like a beam if the material is uniform or homogeneous.A separate substance is frequently used to strengthen beams and other structures.The centroid's distance from the geometric center is probably altered by this strengthening.Engineers must take this into consideration while creating their designs. Equipment: Card stock, poster board, or a corkboard.- Paper that weighs no more than 20 kg. - Clear tapeScissors, 18 inches of twine, one washer, a thumbtack, a ruler, and MDSolids.To learn more about centroid location refer
https://brainly.com/question/7722758
#SPJ4
using examples, explain why configuration management is important when a team of people are developing a software product. a small company has developed a specialized product that it configures specially for each customer. new customers usually have specific requirements to be incorporated into their system, and they pay for these to be developed. the company has an opportunity to bid for a new contract, which would more than double its customer base. the new customer also wishes to have some involvement in the configuration of the system. explain why, in these circumstances, it might be a good idea for the company owning the software to make it open source
If numerous individuals are working on a project, configuration management is essential. Many people are working on a project, but each is developing a different module, and modules have dependencies.
What do you mean by configuration management?
Configuration management (CM) is the process of establishing and maintaining consistency between a product's performance, functional, and physical features and its requirements, design, and operational information across the course of its life. Military engineering groups commonly employ the CM process to handle changes across the system lifespan of complex systems such as weapon systems, military vehicles, and information systems.
To learn more about configuration management
https://brainly.com/question/9978288
#SPJ4
discuss the factors that influence the compressive strength of concrete exposed to a fire of medium intensity (1200 f, short-duration exposure). compared to the compressive strength, how would the elastic modulus be affected?
The specimen size, shape, and friction at its ends are the three main variables that influence the results of concrete compression.
These elements have an impact on the phenomena that are witnessed and on one another. The goal of this work is to evaluate the current understanding of concrete compression and how size, shape, and friction affect it. The following factors affect how fire resistant concrete structures are: element size and shape, concrete type, type of reinforcement, provision of protective concrete cover for the reinforcement, load supported, and restraint circumstances. When exposed to fire, concrete degrades and suffers greatly from loss of mechanical qualities like strength, elastic modulus, and volume deformation. But when concrete is subjected to intense heat from a long-burning fire, it loses most of its structural strength properties. Concrete gets damaged more severely the longer it is left exposed.
Learn more about friction here:
https://brainly.com/question/11364262
#SPJ4
technician a says that coolant can be a variety of colors with green and orange being common. technician b says that coolant needs to be mixed with water to provide the best protection against freezing and boiling. who is correct?
Technician A is correct. Coolant can be a variety of colors, with green and orange being common.
What is Coolant?
A coolant is a material that lowers or controls the temperature of a system. It is commonly a liquid or gas. High thermal capability, low viscosity, low cost, non-toxic, chemically inert, and neither causes nor promotes cooling system corrosion are characteristics of the perfect coolant. The coolant must also be an electrical insulator for some applications. In industrial processing, heat-transfer fluid is a technical word that is more frequently used in high temperature and also low temperature manufacturing applications, despite the fact that the phrase "coolant" is commonly in use in automotive and HVAC applications. Cutting fluids are also covered by the phrase. Water-soluble coolant and plain cutting fluid are two general categories for industrial cutting fluid. Oil in water emulsion serves as a water-soluble coolant. It ranges in oil content from none to a variety (synthetic coolant).
To learn more about Coolant
https://brainly.com/question/29328571
#SPJ4
gary is a freelance network analyst. a client approaches him to provide a solution for his firm wherein employees have been found to carry sensitive information out of the office premises. this data breach has led to a lot of market speculations as a result of which there has been a significant drop in the share market prices of the company's stocks. gary is contracted to find a solution to this issue. analyze which of the following options should be carried out by gary keeping in mind the sensitivity of the situation.
After analyzing the sensitivity of the situationand using the knowledge of a freelance network analyst, Gary will Deploy a DLP solution because The DLP solution gives the information security team complete visibility into all network data, including: Data in use: Using user authentication and access control to secure data that is being used by an application or endpoint.
What is DLP in Cyber Security?
Data loss prevention (DLP) is a cybersecurity tool that detects and prevents data breaches. Because it prevents sensitive data from being extracted, organizations use it for internal security and regulatory compliance.
Businesses can use DLP to identify data loss, stop unauthorized data transfers outside of the organization, and stop sensitive or personally identifiable data from being destroyed (PII).
The California Consumer Privacy Act (CCPA), the European Union's General Data Protection Regulation (GDPR), and the Health Insurance Portability and Accountability Act are just a few examples of laws that use it to help organizations with data security and compliance.
Despite the fact that the terms "data loss" and "data leakage prevention" are frequently used interchangeably, organizations can use DLP security to protect themselves from both.
DLP enables companies to:
Recognize sensitive data across multiple on-premises and cloud-based systemsPrevent the accidental sharing of dataMonitor and protect dataEducate users on how to stay compliantTo know more about Data Analyst, visit: https://brainly.com/question/29240431
#SPJ1
. there are n people, each in possession of a different rumor. they want to share all the rumors with each other by sending electronic messages. assume that a sender includes all the rumors he or she knows at the time the message is sent and that a message may only have one addressee. design a greedy algorithm that always yields the minimum number of messages they need to send to guarantee that everyone of them gets all the rumors. (hint. the minimum number of messages for n
The Greedy Algorithm that always yields the minimum number of messages they (n number of people) need to send to guarantee that every one of them gets all the rumors is given as follows:
Func: (State, n) →
this · max = 1 if ! this · max || this · max > n
this · max_num = 1 if ! this · max _ num ||
this · max_num >n
messages = [ ]
if max_num = = n
for i in [ 1...n]
continue if i = = max_num
messages · push [max_num, i, max-state [i]]
else
messages · push [max_num, max_num + 1, max]
this · max + 1
this · max_num + =1
messages.
What is a Greedy Algorithm?A Greedy Algorithm is one that always selects the best instant, or local, option when searching for an answer.
Greedy algorithms discover the overall, or globally, the best solution to some optimization issues but may provide less-than-optimal solutions to specific cases of other problems.
Learn more about a Greedy Algorithm:
https://brainly.com/question/13151265
#SPJ1
A) Implement an algorithm to find the shortest path from the start node to the end node using an A* (A-star) heuristic search. Use the straight-line distance to the end node as a heuristic function. Show your pseudo code for this algorithm. Is this an admissible heuristic function? Why or why not?
Hint: Define the necessary functions to implement the search problem. This should include a function that takes a vertex as input and returns the set of vertices that can be reached in a straight line from the given vertex. You may need to implement a function that detects whether two-line segments intersect (the algorithm is attached). The problem can be solved using shortest path algorithms, but you are required to use A*.
B) Present the solutions for the following pair of starting point and ending point using the A* algorithm you implemented. Show the optimal path.
Start: (115, 655) End: (380, 560)
With the finding that g(n) = g*(n) for any expanded n, an A* uses a consistent heuristic to find the optimal routes to all extended nodes.
Is this a heuristic function that is acceptable? An algorithm is a process for executing a program step-by-step.An algorithm (/aelrm/ (listen)) is a finite series of precise instructions used in mathematics and computer science to solve a class of specific problems or perform a computation.Algorithms are used as specifications for carrying out calculations and processing data.Advanced algorithms can reroute the execution of the code along many paths by performing automated deductions (also known as automated reasoning) and using logical and mathematical tests (referred to as automated decision-making).Alan Turing was the first to refer to human characteristics as metaphorical representations of computers using terms like "memory," "search," and "stimulus."On the other hand, a heuristic is a problem-solving method that, particularly in problem domains, may not be completely defined or may not always result in the best or most accurate solutions.To learn more about heuristic function refer
https://brainly.com/question/29353200
#SPJ4
3. If the Boeing 747 above is cruising at 940 km/h, the density of the air is 1.20 g/L, and the lift coefficient is 1, what is the lift? answer= 20 900 000 newtons
need to show work
The density of the air will be 1.20 g/L, and the lift coefficient is 1, the lift will be 20,900,000 N.
What is density of the air?
The density of air, also known as atmospheric density, is the mass per unit volume of the Earth's atmosphere. Air density, like air pressure, decreases as height increases. It also fluctuates as air pressure, temperature, and humidity change. Aeronautics, gravimetric analysis, the air-conditioning business, atmospheric research and meteorology, agricultural engineering, and the engineering community which deals with compressed air all use air density.
= 1/2 × C × rho × v^2 × A
Lift = 1/2 × 1 × 1.20 × 940^2 × 5500
Lift = 20,900,000 N
To learn more about density of the air
https://brainly.com/question/28489627
#SPJ1
one of the differences between high density polyethylene (hdpe) and low density polyethylene (ldpe) is the higher crystallinity of ldpe.
The answer of polythylene is true.
What is polythylene?
Polyethylene or polythene is the most commonly made plastic. It is a polymer that is mostly used for packaging. In 2017, approximately 100 million tonnes of polyethylene resins were manufactured annually, accounting for 34% of the overall plastics market. Eric Fawcett and Reginald Gibson at the Imperial Chemical Industries (ICI) facilities in Northwich, England, unexpectedly found the first industrially feasible polyethylene synthesis (diazomethane is a very unstable compound that is normally avoided in industrial application). When a mixture of ethylene and benzaldehyde was subjected to extremely high pressure (several hundred atmospheres), a white, waxy substance was created.
To learn more about polythylene
https://brainly.com/question/16047489
#SPJ4
Match the key terms with their definitions.
1. An animated segment within a Tour.
2. An association between two related tables where both tables contain a related field of data, such as IDs.
3. A business intelligence tool that can connect and shape data from multiple sources.
4. A feature that enables you to integrate data from multiple sources within a workbook.
5. A file type that uses commas to separate data into columns and a newline character to separate data into rows.
6. A special character (such as a tab or space) that separates data.
7. A method of importing external data into Excel but not maintaining a link to the original data source.
8. A special character that designates the end of a line and separates data for the next line or row.
9. A built-in add-in that offers the key functionality that is included in Excel’s stock PivotTable options, plus a variety of useful features for the power user.
10.A process that updates the linked data in an Excel workbook with the most up-to-date information.
11.The process of inserting external data—data created or stored in another format—into the current application.
12.The settings that control how imported data in cells connect to their source data.
13.The process of editing information from one or more data sources to desired parameters before importing into an application.
14.An online application suite designed to help users manage, supplement, visualize, and analyze data.
15.A time-based animation that can display a 3D Map from different perspectives.
16.A file type that uses tabs to separate data into columns.
17.A data file that contains characters, such as letters, numbers, and symbols, including punctuation and spaces.
18.A method of summarizing data visually to better understand the significance of the information.
19.Attributes that contribute to the visualization of data.
20. A file in which each column contains a specific number of characters.
.
Data shaping
Tab-delimited file
Power BI
Dimension
Tour
Data Model
Fixed-width text file
Data visualization
Comma Separated Values (CSV) file
Text file
External data properties
Delimiter
Power Query Editor
Relationship
Importing
Embed
Newline character
Refresh
Scene
Power Pivot
An animated segment within a Tour is Tab-delimited file. An association between two related tables where both tables contain a related field of data, such as IDs is Tour.
1. An animated segment within a Tour is Tab-delimited file.
2. An association between two related tables where both tables contain a related field of data, such as IDs is Tour.
3. A data-connecting and data-shaping tool for corporate intelligence Data model.
4. A function that lets you combine data from many sources inside a spreadsheet is Data visualization.
5. A file type that employs newlines to break data into rows and commas to divide it into columns is Comma Separated Values (CSV) file.
6. A unique character that divides data, such as a tab or space is
7. A technique for bringing in external data into Excel without keeping track of the original data source is External data properties.
8. A unique character that indicates a line's end and divides data for the following line or row is Newline character.
9. A built-in add-in that provides the essential functionality found in Excel's stock PivotTable options, in addition to a number of practical features is Power Pivot.
10. A procedure that provides the most recent information to the linked data in an Excel workbook.
11. The procedure of adding external data—information created or kept in another format—to the application that is already running.
12. The options that govern how cells containing imported data are connected to the original data.
13. The process of modifying data before it is imported into an application from one or more data sources to meet specified specifications.
14.A collection of web tools for managing, enhancing, visualizing, and analyzing data.
15. A time-based animation that shows a 3D Map from various angles.
16. A file format that divides data into columns using tabs.
17. A data file of characters, including punctuation and spaces, as well as numbers, letters, and symbols.
18. A technique for visually summarizing material to help people grasp its importance.
19. Characteristics that help with data visualization.
20. A file with a set number of characters in each column Text file.
To know more about data click here:
https://brainly.com/question/25704927
#SPJ4
You are given an array A of N integers (N is even). Split array A into N/2 pairs in such a way that the largest sum of any pair will be as small as possible. Each element has to belong to exactly one pair.
For example, given array A = [4, 5, 3, 1], we can split it into pairs in three ways:
(4, 5) and (1, 3), where the sums of the pairs' elements are 9 and 4. The largest sum is 9.
(4, 1) and (5, 3), where the sums of the pairs' elements are 5 and 8. The largest sum is 8.
(4, 3) and (5, 1), where the sums of the pairs' elements are 7 and 6. The largest sum is 7.
In the above splits, pairs with the largest sums of elements are (4, 5), (5, 3) and (4, 3). Of these, the smallest is 4 + 3 = 7.
Write a function:
class Solution { public int solution(int[] A); }
that, given an array A of N integers, returns the largest sum of the pairs' elements in the optimal split.
Examples:
1. Given A = [4, 5, 3, 1], the function should return 7, as explained above.
2. Given A = [2, 3, 1, 1], the function should return 4. The optimal split is (1, 3) and (1, 2), where the sums of pairs are 1 + 3 = 4 and 1 + 2 = 3, and 4 is the larger.
3. Given A = [−5, −6], the function should return −11. We can make only one pair, (−5, −6), whose sum is −11.
4. Given A = [2, 2, 2, 2, 2, 2], the function should return 4. The only possible split is (2, 2), (2, 2) and (2, 2), where the sums of all pairs are equal to 4.
Write an efficient algorithm for the following assumptions:
N is an even integer within the range [2..100,000];
each element of array A is an integer within the range [−1,000,000,000..1,000,000,000].
#include
#include
using namespace std;
int solution(vector A){
cerr << "Tip: Use cerr to write debug messages on the output tab.";
return 0;
You are given an array A of N integers (N is even). In order to make the largest sum of any pair as small as possible, divide array A into N/2 pairs.
}
int main()
{
vector A = {4, 5, 3, 1};
cout << solution(A);
return 0;
}
What is array?
An array is a type of data structure used in computer science that contains a set of elements (values and variables), each of which is identified by an array index or key. An array is stored in a way that allows a mathematical formula to determine each element's position given its index tuple. A linear array, sometimes referred to as a one-dimensional array, is the most basic sort of data structure. For instance, ten words with memory addresses 2000, 2004, 2008,..., 2036 (or 0x7D0, 0x7D4, 0x7D8,..., 0x7F4) may be used to store an array of ten 32-bit (4-byte) integer variables with indices 0 through 9. This would give the element with index I the address 2000 + I 4) in this case. The first address, foundation address, and base address is the memory location of the first element of an array.
To learn more about array
https://brainly.com/question/28632808
#SPJ4
which of these steel framing features provides earthquake safety? group of answer choices slip-critical connections composite flooring eccentrically braced frames braced frames wide-flange beams
The steel framing feature that provides earthquake safety is: eccentrically braced frames.
What is an earthquake?In Science, an earthquake can be defined as a sudden, natural shaking of the ground, especially due to movements within the Earth's crust or Earth’s interior and the lithosphere (upper mantle) which creates seismic waves.
Additionally, an earthquake is a geological process that is typically driven by the energy generated from Earth's crust or Earth’s interior, which makes it very strong and impactful.
However, eccentrically braced frames is a steel framing feature that is used by structural engineers in order to provide earthquake safety in buildings.
Read more on earthquakes here: brainly.com/question/248561
#SPJ1
experiment 8: dissociation constant of acetic acid by electrical conductivity measurements lab example
The dissociation constant as well as equivalent conductance at infinite dilution, Ao, of a weak electrolyte are computed using only two conductance measurements at different concentration levels. The iterative procedure used on acetic acid data produced the dissociation constant of 1.80 X 10-5 and, an average (n = 4) value of Ao of 389.5, compared to an expected value of 390.7.
What is Electrical conductivity?
Electrical conductivity is just a standard measure of how easily an electric current can flow through a material. Electrical resistivity, on the other hand, attempts to measure how firmly a material resists this same flow of electric current. Both properties are precise inverses of one another. The Greek letter σ denotes electrical conductivity, while the Greek letter ρ denotes electrical resistivity.
To learn more about Electrical conductivity, visit: https://brainly.com/question/16929482
#SPJ4
9.2 lab: modified student class we are going to modify the student class from lab 9.1 to take parameters for first name, last name, and gpa in the constructor. implement the following instance methods:
A constructor is a special method in Java that is employed to initialize objects. When a class with object is created, the constructor are called. It has the ability of initializing object attributes.
Step-by-step programming of constructor in Java:
public class Person {
// write your code here
private String firstName;
private String lastName;
private int age;
public String getFirstName(){
return firstName;
}
public String getLastName(){
return lastName;
}
public int getAge(){
return age;
}
public void setFirstName(String firstName){
this.firstName = firstName;
}
public void setLastName (String lastName){
this.lastName = lastName;
}
public void setAge(int age) {
if (age > 0 && age <= 100) {
this.age = age;
}else {
this.age = 0;
}
}
public boolean isTeen (){
if (age > 12 && age < 20){
return true;
}
return false;
}
public String getFullName (){
if (firstName.isEmpty()) {
return lastName;
}
if (lastName.isEmpty()){
return firstName;
}
if (firstName.isEmpty() && lastName.isEmpty()){
return " ";
}
else {
return firstName + " " + lastName;
}
}
To learn more about Constructor, visit: https://brainly.com/question/27699164
#SPJ4
prove that among any set of 51 different positive integers that are at most 100, there is always a pair of numbers that differ by 10.
Since each subset contains a pair of numbers that differ by 10, and the subsets are disjoint, it follows that there is always a pair of numbers in the original set that differ by 10.
What is pair?
An ordered pair (a, b) is indeed a pair of objects in mathematics. Because the ordered pair (a, b) differs from the ordered pair (b, a) unless a = b, the order in which the objects appear inside the pair is important. The unordered pair a, b, on the other hand, equals the unordered pair b, a. Ordered pairs are also known as 2-tuples, or 2-length sequences. 2-dimensional vectors are sometimes used to refer to ordered pairs of scalars. The definition of ordered n-tuples is recursive since the entries of an ordered pair may be other ordered pairs (ordered lists of n objects). One pair nested inside another is how the ordered triple (a, b, c) might be defined, for instance.
Consider the set of numbers {1, 2, 3, ..., 51}. We can partition this set into the following subsets:
{1, 11, 21, 31, 41, 51}
{2, 12, 22, 32, 42, 52}
{3, 13, 23, 33, 43, 53}
.
.
.
{10, 20, 30, 40, 50, 60}
Since each subset contains a pair of numbers that differ by 10, and the subsets are disjoint, it follows that there is always a pair of numbers in the original set that differ by 10.
To learn more about pair
https://brainly.com/question/28533127
#SPJ4
Do you like my drawing??
Answer:
Yes
Explanation:
That is a very nicely done drawing!