Answer:
CO contains polar covalent bond, because these atoms share unequal electrons.
Answer:
N₂
Explicacion:
Si la diferencia de electronegatividad es muy alta, por ejemplo entre un metal y un no metal, se forman enlaces iónicos
60.0 kL of hydrogen at SATP (24.8 L/mol) is reacted with excess amount of nitrogen. The resulting
ammonia gas needs to be stored in a gas tank with a volume of 6.25 kL and under 2000 kPa of pressure.
What should the temperature regulator of the gas tank be set at?
The temperature regulator of the gas tank be set at 842.64 K
What volume of ammonia gas is produced by reacting 60.kL of hydrogen with excess nitrogen at SATP?The volume of hydrogen ammonia produced is given by the mole ratio of the gases in the equation below:
3 H₂ + N₂ → 2 NH₃
The mole ratio is 2:3
Volume of ammonia produced = 2/3 * 60 kL = 40 kL
The temperature regulator value is determined using the general gas equation:
P₁V₁/T₁ = P₂V₂/T₂T₂ = P₂V₂T₁/P₁V₁
P₂ = 2000 kPaV₂ = 6.25 kLT₁ = 273.15 KP₁ = 101.3 kPaV₁ = 40 kLT₂ = (2000 * 6.25 * 273.15)/(101.3 * 40)
T₂ = 842.64 K
The temperature regulator of the gas tank be set at 842.64 K
In conclusion, the general gas equation is useful in determining gas volume, pressure and temperatures.
Learn more about general gas equation at: https://brainly.com/question/4147359
#SPJ1
What mass of carbon dioxide is produced from the complete combustion of 5.30x10-3 g of methane?
Express your answer with the appropriate units.
View Available Hints
Answer:
1.45 x 10⁻² g CO₂
Explanation:
To find the mass of carbon dioxide, you need to (1) convert grams CH₄ to moles CH₄ (via molar mass), then (2) convert moles CH₄ to moles CO₂ (via mole-to-mole ratio from reaction coefficients), and then (3) convert moles CO₂ to grams CO₂ (via molar mass). The final answer should have 3 sig figs to reflect the given value (5.30 x 10⁻³ g).
Molar Mass (CH₄): 12.011 g/mol + 4(1.008 g/mol)
Molar Mass (CH₄): 16.043 g/mol
Combustion of Methane:
1 CH₄ + 2 O₂ ---> 2 H₂O + 1 CO₂
Molar Mass (CO₂): 12.011 g/mol + 2(15.998 g/mol)
Molar Mass (CO₂): 44.007 g/mol
5.30 x 10⁻³ g CH₄ 1 mole 1 mole CO₂ 44.007 g
--------------------------- x ---------------- x --------------------- x ----------------- =
16.043 g 1 mole CH₄ 1 mole
= 0.0145 g CO₂
= 1.45 x 10⁻² g CO₂
When most fuels burn, water and carbon dioxide are the two main products. however, water and carbon dioxide are not the products of all combustion reactions. which will not form water and carbon dioxide when it burns?
Incomplete combustion does not form water and carbon dioxide when it burns.
There are two types of combustion:-1) Complete combustion:-A fuel receives enough oxygen to complete combustion when it burns in a lot of air.
Fuels like gasoline and natural gas contain hydrocarbons. These are only hydrogen and carbon compounds. When they totally burn:
The hydrogen oxidizes to water while the carbon turns into carbon dioxide (remember that water, H2O, is an oxide of hydrogen)
for full combustion:
hydrocarbon + oxygen→Carbon dioxide + water
The following equations describe how propane, which is used in bottled gas, completely burns.
oxygen + propane→carbon dioxide + water
C3H8 + 5O2 → 3CO2 + 4H2O
2) Incomplete combustion:-When there is insufficient air or oxygen present, incomplete combustion ensues. Carbon dioxide is still created, but it is replaced with carbon monoxide and carbon.
For incomplete combustion in general:
Hydrocarbon + Oxygen→ Carbon Monoxide + Carbon+ Water
incomplete propane combustion, which results in the production of carbon rather than carbon monoxide
oxygen + propane→carbon + water
C3H8 + 2O2 → 3C + 4H2O
Learn more about combustion here:-
https://brainly.com/question/24267506
#SPJ4
The electron configuration of an element is 1s22s22p4.
Describe what most likely happens when two atoms of this element move toward each other.
The likely thing which happens when two atoms of this element move toward each other is covalent bonding.
What is Covalent bonding?This involves the atoms of element sharing electrons in order to achieve a stable octet configuration.
The element is oxygen which has an atomic number of 8 and needs two electrons to complete its outermost shell which results in the formation of two covalent bonds.
Read more about Covalent bonding here https://brainly.com/question/3447218
#SPJ1
How can we prevent land pollution?
Answer:
1. Make people aware about the concept of Reduce, Recycle and Reuse.
2. Reduce the use of pesticides and fertilizers in agricultural activities.
3. Avoid buying packages items as they will lead to garbage and end up in landfill site.
4. Ensure that you do not litter on the ground and do proper disposal of garbage.
5. Buy biodegradable products.
6. Do organic gardening and eat organic food that will be grown without the use of pesticides.
7. Create dumping ground away from residential areas.
I hope it helps u
How much heat is required to change 35.0 g of water from ice to liquid water?
The following information for water is given, but may or may not be useful:
C = 4.184 J/g°C
AHfus = 334 J/g
AHvap=2260J/g
Taking into account the definition of calorimetry and latent heat, 11,690 J is required to change 35 g of water from ice to liquid water.
Definition of calorimetryCalorimetry is the measurement and calculation of the amounts of heat exchanged by a body or a system.
Definition of sensible heatSensible heat is defined as the amount of heat that a body absorbs or releases without any changes in its physical state (phase change).
Definition of latent heatLatent heat is defined as the energy required by a quantity of substance to change state.
When this change consists of changing from a solid to a liquid phase, it is called heat of fusion and when the change occurs from a liquid to a gaseous state, it is called heat of vaporization.
The heat Q that is necessary to provide for a mass m of a certain substance to change phase is equal to
Q = m×L
where L is called the latent heat of the substance and depends on the type of phase change.
Heat to change water from ice to liquid waterIn this case, you know:
Q= ?m= 35 gL= ΔHfus= 334 [tex]\frac{J}{g}[/tex] because the change consists of changing from a solid (ice) to a liquid phase (liquid water).Replacing in the definition of latent heat:
Q = 35 g× 334 [tex]\frac{J}{g}[/tex]
Solving:
Q= 11,690 J
Finally, 11,690 J is required to change 35 g of water from ice to liquid water.
Learn more about calorimetry:
brainly.com/question/14057615
brainly.com/question/24988785
brainly.com/question/21315372
brainly.com/question/13959344
#SPJ1
Compound found to contain 58.4% bromine. Which compound contains this % bromine by mass
Answer:
the compound is bromine trifluoride
Explanation:
it contains 58.37 as there is no compound with 58.4 bromine formula brf3
According to the following reaction, how many moles of oxygen gas are necessary to form 0.408 moles carbon dioxide?
C3 Hs (g) +502(g) → 3CO2(g) + 4H₂O(g)
mol oxygen gas
Answer:
2 molecules of oxygen are necessary
When preparing a pure and dry sample of ammonium chloride, we cannot dry the sample of ammonium chloride by evaporating it to dryness.
we cant
Explanation:
you need to leave some water to stop dehydration of substance
When preparing a pure and dry sample of ammonium chloride, we cannot dry the sample by evaporating it to dryness because ammonium chloride is a salt that decomposes upon heating.
When heated, ammonium chloride undergoes sublimation, which means it directly changes from a solid to a gas without passing through a liquid phase. This process would lead to the loss of the compound, and we would not be able to obtain a pure and dry sample.
Instead, other methods such as vacuum drying or desiccation are used to remove moisture from ammonium chloride without causing decomposition.
Learn more about Ammonium chloride, here:
https://brainly.com/question/14501371
#SPJ3
Differences between Minerals and ore minerals
Answer:
Minerals are naturally occurring inorganic solids with a crystalline structure and a definite range of chemical formula. Ores are concentrations of minerals in rock that are high enough to be economically extracted for use. All ores are minerals, but all minerals are not necessarily ores.
Hope its helpful!
Minerals are inorganic solids that develop in nature and have a crystalline structure as well as a specific spectrum of chemical formulas. Ores are areas of mineral concentration in rock that may be economically mined for use. Lodestone is one of the iron ores. The mineral known as ore is where metal is easily and affordably mined. The composition of ore is known. Minerals are naturally occurring metals that are found in the crust of the planet. Ores are minerals that can be utilized to profitably extract metal.
Please help iggghghbvvv
A) Y because the line is flat, not going up or down. So, constant or no change in population
B) A positive correlation with introduction to animal A (because population is going up or increasing)
C)
1.New predator (due to Animal A eating them, meaning more of their predators are eating them)
2. Lack of food or food availability due to competition (from Animal A, e.g. if they eat the same food)
3. Introduction to a new disease (from Animal A)
Hope this helps!
calc mL of radiator solution when 197 mL antifreeze is used to make a 25% (v/v) solution
The volume of the radiator solution formed with the 197 mL of antifreeze is 788 mL.
What is a percentage?A percentage is given as the respective ratio of the quantity present with respect to others.
The solution of 25% v/v can be depicting the presence of a 25% volume of antifreeze in the radiator solution.
The volume of the radiator solution has 197 mL of antifreeze. The total volume of the solution suppose is x.
25% of x = 197 mL
25/100 * x = 197
x = 788 mL
The volume of the radiator solution formed with 25% v/v antifreeze is 788 mL.
Learn more about percentage dilution, here:
https://brainly.com/question/14528274
#SPJ1
hat is used and produced in glycoloysis?
1.
2 Pyruvate
2.
2 ATP
a
3.
H2O
4.
4 ATP
5.
2 NADH
b
6.
glucose
a.
produced
b.
used
During glycolysis is used glucose, ADP and pyruvate and produce ATP, water and NADH.
What is glycolysis?Glycolysis is the first step of cellular respiration by which glucose is used to generate energy in the form of ATP.
Cellular respiration has three sequential steps, i.e., glycolysis, the Krebs cycle and oxidative phosphorylation.
Glycolysis is the cellular respiration step that generates 2 net high energy ATP molecules and 2 reduced NADH.
In conclusion, glycolysis uses glucose, pyruvate and ADP to generate ATP, water and Nicotinamide adenine dinucleotides (NADH).
Learn more about glycolysis here:
https://brainly.com/question/737320
#SPJ1
I need help with the solution
Answer:
2.) C₆H₆O₂
Explanation:
(Step 1)
To find the molecular formula of hydroquinone, you need to first determine the molar mass of the empirical formula. The molar mass is a sum of the individual atomic weights of each element multiplied by their quantities (denoted by the subscripts).
Atomic Weights:
Carbon (C): 12.011 g/mol
Hydrogen (H): 1.008 g/mol
Oxygen (O): 15.998 g/mol
Molar Mass (C₃H₃O): 3(12.011 g/mol) + 3(1.008 g/mol) + 15.998 g/mol
Molar Mass (C₃H₃O): 55.055 g/mol
(Step 2)
As you can see, the molar mass of the empirical formula is not the same as the molar mass of the molecular formula. Rather, the empirical molar mass is approximately half of the molecular molar mass. Therefore, to make these masses equal, we need to double the empirical formula. This can be done by multiplying all of the subscripts by 2.
55.055 g/mol x 2 = 110.11 g/mol
110.11 g/mol = 110.108 g/mol
C₃ x 2 = C₆
H₃ x 2 = H₆
O x 2 = O₂
Therefore, the correct molecular formula of hydroquinone is C₆H₆O₂.
A compound has the formula X2Fe(CN)6 ∙ 12H2O, where X is an unknown element. [3]
If the compound is 45.34% water by mass, what is the identity of element X?
The element X from the calculation is Cs.
What is the identity of element X?We have in the question the percentage by mass of water as 45.34% thus we can write;
45.34% = 12(H20)/2(X) + Fe + 6(CN)
Hence;
45.34/100 = 12(18)/2X + 56 + 6(26)
0.45 = 216/2X + 56 + 156
0.45 = 216/2X + 212
0.45(2X + 212) = 216
0.9X + 95.4 = 216
X = 216 - 95.4/0.9
X = 134
The element X from the calculation is Cs.
Learn more about formula of a compound:https://brainly.com/question/17291729
#SPJ1
What is the conjugate base of CO3-2
The conjugate base of CO3-2 is hydrogen carbonate.
Meaning of Conjugate baseA conjugate base can be defined as a base that can be derived from another base by the reason of it loosing or gaining an electron.
Conjugate base are very similar because they both posses the same elements.
In conclusion, The conjugate base of CO3-2 is hydrogen carbonate.
Learn more about Conjugate base: https://brainly.com/question/13266603
#SPJ1
Why are carcinogens a concern to people?
Answer:
They have been found to cause cancer in humans meaning any release of carcinogens will increase, not decrease, CANCER RISK.
Explanation:
Certain chemicals, including benzene, beryllium, asbestos, vinyl chloride, and arsenic are known human carcinogens, meaning “they have been found to cause cancer in humans.” A persons risk of developing cancer depends on how much, how long, how often, and when they are exposed to these chemicals.
All of these tools are used for science but which tool is used specifically for earth science
Tools which are specifically used for earth science are Temperature Scales which are Celsius, Fahrenheit, and Kelvin.
Temperature tell us about how hot or cold a body is. Temperature is crucial in many disciplines of research, from physics to geology, as well as in most aspects of our daily lives.The temperature scale is a tool that is primarily utilised in Earth science. In metrology, the temperature scale is a mechanism for calibrating the physical quantity temperature.Alcohol, liquid crystal, and infrared radiation thermometers are the three types of thermometers (pyrometer).Celsius, Fahrenheit, and Kelvin are the three primary temperature scales. Temperature conversion equations are used to convert temperatures from one scale to another.At a single pressure and temperature known as the triple point, the three phases of water (ice, liquid water, and water vapour) may coexist.So we can conclude that the temperature scales which is specifically Celsius, Fahrenheit, and Kelvin are specifically used for earth science.
Learn more about temperature here:
brainly.com/question/7510619
#SPJ10
Question 5
Which of the following molecules is carrying oxygen in circulating erythrocytes?
O Memeglobin
O Hemoglobin
O Stemoglobin
O Myoglobin
Question 6
O Hemoglobin
Explanation:
Hemoglobin (Heme + Globin) The protein hemoglobin is a molecule which is responsible for carrying almost all of the oxygen in the blood.
Draw a heating curve for 1 mole of methanol beginning at 170K and ending at 350K. Assume that the values given here are constant over the relevant temperature ranges.
The graph of the heating of methanol has been attached.
The temperature at 170 K is approximately the melting point of methanol.
The temperature at 350 K is approximately the boiling point of methanol.
If we provide heat before 170 K temperature then all the heat provided to the methanol will result in rise in temperature of methanol in solid form.
If we provide heat at 170 K temperature then all the heat provided to the methanol will result in change in physical from of methanol from solid to liquid.
If we provide heat after 170 K temperature and before 350 K temperature then all the heat provided to the methanol will result in rise in temperature of methanol in liquid form.
If we provide heat at 340 K temperature then all the heat provided to the methanol will result in change in physical from of methanol from liquid to gas.
If we provide heat after 350 K temperature then all the heat provided to the methanol will result in rise in temperature of methanol in gas form.
So, the heat given to methanol will rise its temperature except at its Boiling and melting point. At those temperature heat will change the physical form of methanol first. and the graph also have been attached of between boiling point and melting point as given in question .
Learn more about methanol here:
https://brainly.com/question/24143387
#SPJ10
Write out the recipe and list all the ingredients (including the measures) of your favorite dish.
Explain how the ingredients in this recipe cause one or more of the listed reactions.
The recipe for an omelet are:
Ingredients
1 EggSalt and pepper ( 1 tablespoon )Butter ( 1 tablespoon )Recipe:
Turn on the heat and place a pan on it.Add butter to the pan.Crack the egg and whisk it properly.Add the whisked omelet onto the pan and stir.Add salt and pepper.How to illustrate the information?When we turn on the heat and place the pan, a heat transfer takes place and heat transfers from one body to another.
When we add butter to the pan, then the temperature of the pan was more than that of the butter.
Since the melting point of butter was less than the temperature of the pan, the the melting of butter takes place.
When we add the egg, the evaporation of the liquid present in the egg yolk and the egg white takes place.
These are the chemical reactions depicted.
Learn more about recipe on:
https://brainly.com/question/21913357
#SPJ1
Isotopes are:
A. found in the nuclear reactions in stars but not on Earth.
B. are only theoretical.
C. only formed in laboratories.
D. found in nature.
Hello and Good Morning/Afternoon
Let's consider all the choices to determine the attributes of isotopes
Choice (A) is wrong⇒ isotopes are often found in nature as they are often the atoms
that form the world around us
Choice (B) is wrong⇒ isotopes describe a certain type of atom with a certain
characterist that exists, thus it isn't theoretical
Choice (C) is wrong⇒ as said before, isotopes are found in nature and form the world
Choice (D) is correct⇒Isotopes are a type of atoms thus they are found in nature
Answer: (D)
Hope that helps!
#LearnwithBrainly
Answer:
D. found in nature.
Explanation:
Isotope is any of two or more forms of a chemical element, having the same number of protons in the nucleus, or the same atomic number, but having different numbers of neutrons in the nucleus, or different atomic weights. There are 275 isotopes of the the 81 stable elements, in addition to over 800 radioactive isotopes, and every element has known isotopic forms. Isotopes of a single element possess almost identical properties. An isotope of an element is just a version of that element with a particular number of neutrons. Some numbers are stable, some are not; the ones that aren't shoot particles out at extremely high speeds ("radiation").
Since radioisotopes generally have the same chemistry as their stable counterparts (since neutrons play almost no role in chemistry), they'll get wherever other atoms of that element would get. Iodine, for example, accumulates in your thyroid gland - so do radioactive forms of iodine, which can then cause thyroid cancer by irradiating it from the inside.
Also because they're chemically almost indistinguishable, they're almost impossible to separate out by any normal means. It's like giving someone a giant bin of golf balls, some of which are 1% heavier than the other golf balls but are otherwise exactly the same, and saying "okay, sort these". Except the golf balls are atoms and the bin is the size of a small country.
What is the freezing point depression of an aqueous solution of 10.0g of glucose (C6H12O6) in 50.0g of water? [Kf for a water= 1.86°c/m, C=12, O= 16, H=1]
The freezing point depression is 2.1 °c.
What is freezing point?The freezing point is the point that a liquid is converted to solid. Now we know that the freezing point is a colligative property.
Number of moles of glucose = 10.0g /180 g/mol =0.056 moles
Mass of water = 50.0g or 0.05 Kg
Molality of the solute = 0.056 moles/ 0.05 Kg = 1.12 m
The freezing point depression is obtained from;
ΔT = K m i
ΔT = 1.86°c/m * 1.12 m * 1
ΔT = 2.1 °c
Learn more about freezing point depression:https://brainly.com/question/2292439
#SPJ1
Why is the MO structure of NO+ different than that of N2? (the structure, not the number of electrons)
N2 is a homonuclear molecule and NO+ is a heteronuclear molecular ion hence the MO structure of NO+ different than that of N2.
What is the molecular orbital?The molecular orbital is formed by the combination of atomic orbitals. We should note that the number of molecular orbitals must be equal to the number of combining atomic orbitals.
Now we know that N2 is a homonuclear molecule and NO+ is a heteronuclear molecular ion hence the MO structure of NO+ different than that of N2.
Learn more about molecular orbital:https://brainly.com/question/13265432
#SPJ1
what is the balanced hydration equation for Silicon phosphate
The balanced hydration equation for Silicon phosphate is as follows: Si3(PO4)4 + 6H2O → 3SiO2 + 4H3PO4.
What is hydration?Hydration is the incorporation of water molecules into a complex with those of another compound.
According to this question, silicon phosphate with a chemical formula of Si3(PO4)4 is hydrated to produce silicon oxide and phosphoric acid as follows:
Si3(PO4)4 + H2O → SiO2 + H3PO4.
However, this equation is not balanced as the number of moles of each element on both sides is not the same. The balanced equation is as follows:
Si3(PO4)4 + 6H2O → 3SiO2 + 4H3PO4
Learn more about hydration at: https://brainly.com/question/11202174
#SPJ1
Complete combustion of a 17.12mg sample of xylene In oxygen yielded 56.77mg
Xylene moles =\frac{17.12}{106.16×1000}=0.00016moles=
106.16×1000
17.12
=0.00016moles
Moles of CO_2 =\frac{56.77}{44.01×1000}=0.0013CO
2
=
44.01×1000
56.77
=0.0013
Moles of H_2O= =\frac{14.53}{18.02×1000}=0.0008H
2
O==
18.02×1000
14.53
=0.0008
Moles ratios
\frac{0.0013}{0.0008}=1.625
0.0008
0.0013
=1.625
\frac{0.0008}{0.0008}=1
0.0008
0.0008
=1
Hence molecular fomula
The empirical formula is C 4H 5.
The molecular formula C8H10
What is the change in temperature if 500 J of heat are added to a 23 g sample of silver? (Thespecific heat of silver is 0.24 J/g °C)
The change in temperature of silver if 500 J of heat are added to a 23 g sample of silver is 90.5°C.
How to calculate change in temperature?The change in temperature of a substance can be calculated using the following formula:
Q = mc∆T
Where;
Q = quantity of heat absorbed or releasedm = mass of substancec = specific heat capacity∆T = change in temperature500 = 23 × 0.24 × ∆T
500 = 5.52∆T
∆T = 500 ÷ 5.52
∆T = 90.5°C
Therefore, the change in temperature of silver if 500 J of heat are added to a 23 g sample of silver is 90.5°C.
Learn more about temperature at: https://brainly.com/question/19051558
#SPJ1
How many atoms are present in 8.78 grams O2?
Moles of O_2
Given mass/Molar mass8.78/320.27molNo of atoms
No of moles×Avagadro no0.27×6.023×10²³1.6×10²³atomsNote the formula
[tex]\boxed{\sf No\:of\:atoms=No\:of\:moles\times Avagadro\:no}[/tex]
Find no of moles
[tex]\\ \tt{:}\dashrightarrow \dfrac{8.78g}{32g/mol}[/tex]
[tex]\\ \tt{:}\dashrightarrow 0.27mol[tex]
No of atoms
[tex]\\ \tt{:}\dashrightarrow 0.27\times 6.023\times 10^{23}[/tex]
[tex]\\ \tt{:}\dashrightarrow 1.6\times 10^{23}atoms[/tex]
A scientist observes that the electrical resistance of a subconducting material drafts to zero when the material is cool to very low temperatures which is the following statements best describes what the scientist is observing
The statement that describes what the scientist is observing is; "the scientist is observing an intensive property of a superconductor."
What is electrical resistance?The term electrical resistance refers to the opposition that is offered to the flow of current. We know that a superconductor is one whose electrical resistance drops to zero when it s cooled to the absolute zero.
Hence, the statement that describes what the scientist is observing is; "the scientist is observing an intensive property of a superconductor."
Missing parts:
A scientist observes that the electrical resistance of a superconducting material drops to zero when the material is cooled to very low temperatures. Which of the following statements best describes what the scientist is observing?
The scientist is observing the electrical power of a superconductor.
The scientist is observing the temperature of a superconductor.
The scientist is observing an intensive property of a superconductor.
The scientist is observing an extensive property of a superconductor
Learn more about superconductors:https://brainly.com/question/17154827
#SPJ1
A scientist is working with a new kind of quantum dot to
make a dye. He is applying Newton's laws to the
particle, but it seems to be breaking these laws of
physics.
Which action will most likely help the scientist study
the particle's motion?
The action that will most likely help the scientist study the particle's motion is that He needs to use quantum mechanics, not Newtonian mechanics because this is a nanotechnology product.
What is Quantum Mechanics?This refers to the branch of mechanics that has to do with the description of motion and the different concepts of quantization of energy
Hence, we can see that based on the fact that a scientist uses a new quantum dot to make a dye and uses Newton's laws, but he seems to be breaking the laws, so he needs to use quantum mechanics because this is a nanotechnology product.
Read more about quantum mechanics here:
https://brainly.com/question/26095165
#SPJ1