Answer:
b: Neither atoms will have a full valence shell
Explanation:
I think sooo
O Previous
4 v
Next
Scientific Models and Measurements: Mastery Test
What type of scientific model does the flow chart represent?
Make
observations
Ask
questions
Construct a
hypothesis.
Repeat the
process.
Test the hypothesis with
an Investigation
Analyze the data.
Explain the
results
The hypothesis
Is true.
The hypothesis
Is not true.
Communicate
the results.
Answer:
what is scientific model
Explanation:
Which compound in the picture has a central atom with four outside atoms and has at least one nonpolar bond.
Answer:
The answer is:
B
Explanation:
The compound in Option B is Methane.
Methane is known to be a compound which has two elements, carbon and hydrogen. It has a central atom which is surrounded by four hydrogen atoms. It's chemical formula is CH4.
Methane's outer atoms are dipoles and are in the same direction. This makes the overall molecule non-polar. The compound itself has non-polar bonds and it is non-polar itself.
Find the kinetic energy of a 5kg bowling ball that is traveling 2 meters per second
Explanation:
KE = ½ mv²
= ½ x 5 x 2² joule
= 10 joule
I NEED THIS ASAP PLEASEE
what is the partial pressure of nitrogen dioxide gas in psi in a sealed vessel that has a total pressure of 2558 psi and partial pressures of 54.6 bar for carbon dioxide?
Answer:
121.8bar
Explanation:
The partial pressure is the pressure a gas would exert if it were alone in the volume of the gas mixture;
Given parameters:
Total pressure = 2558psi
Partial pressure of carbon dioxide = 54.6bar
Unknown:
Partial pressure of nitrogen dioxide gas = ?
Solution:
Total pressure = partial pressure of carbon dioxide + partial pressure of nitrogen dioxide gas
Let us convert from psi to bar;
14.504psi = 1 bar
2558psi = [tex]\frac{2558}{14.504}[/tex] = 176.37bar
Now;
Partial pressure of nitrogen oxide = 176.37bar - 54.6bar = 121.8bar
Answer:
1766 psi
Explanation:
The first step is to convert 54.6 bar into psi units, which is aproximately 791.9 psi. Next, subtract that from 2558 psi and you will get about 1766 psi.
how would one convert 36 yd to centimeters?
Answer:
3291.84 cm
Explanation:
you would multiply the amount of yards you have by 91.44, since that's how many centimeters there are in 1 yd.
Answer: it’s D
Explanation:
What is the concentration of hplus ions at a ph=11
Answer: 10^-11
Explanation:
to find the concentration of H+ ions given the ph, we use the formula 10^(-pH).
so 10^-11
The diagram shows a transform fault. What is a likely result of slippage along
this fault?
Fault
O.
A. Pyroclastic flow
B. Shield volcano
C. Earthquake
D. Crater
Answer:
C. Earthquake
Explanation:
Earthquake is a likely result of the slippage along this fault boundary.
At a transform margin, rocks are moving parallel to one another. This often causes a slippage that leads to the generation of earthquakes.
An earthquake is a sudden displacement within the earth that leads to a sudden release of energy in all direction. The slippage on the surface of a transform fault often lead to earthquakes.Answer:
C
Explanation:
PLEASE HELP ME!!!
THE CHEM QUESTION IS...
Calculate the amounts of heat required for 25.0 g of water to change from 10°C to 30°C
Answer:
1045
Answer: 1045 J of energy was released on cooling the down the water from 20 °C to 10 °C.
Answer:
..............=2100
Which statement best describes a difference between electromagnetic waves
and mechanical waves?
A. Mechanical waves can transfer matter through empty space.
B. Electromagnetic waves vibrate in two directions that are
perpendicular to each other.
C. Mechanical waves transfer matter, not energy, from one place to
another.
D. Electromagnetic waves require empty space to transfer energy
from one place to another.
Answer:
C
Explanation:
electronic waves transmits energy but mechanical waves require a medium in order to transport their energy from bgg one place to another.
Answer:
it is B.) Electromagnetic waves vibrate in two directions that are
Explanation:
stay safe 2021
does formaldehyde classified as a pure substance or a mixture
Answer:
pure substance
Explanation:
it is a naturally occuring compound
Answer:
Formaldehyde is a mixed substance. It is made up of Carbon, 2 Hydrogen, and an Oxygen.
Explanation:
The formula is CH2O
How do the farmers use the property of density of cranberries to harvest the crop?
:answer question number 2
Explanation:
this question was answered in a couple weeks with the same question I did u do not want me and my dad did it all over and u just said it is not going well and you don't want me and my mom and dad don't mind if I can come up to the mall and pick them out on my own and I can come
2.
What did five different witnesses see in the area where Mary Lou Arruda
disappeared?
A. Mary Lou talking to an unknown man.
B. A green car driven by an unknown man.
C. Mary Lou's bicycle in the trunk of a green car.
D. An unknown man on foot following Mary Lou .
Answer:
c
Explanation:
I believe its c but i could be wrong sorry if I am
what is 14.235 rounded to the nearest tenth
Answer:
it would round down to 14.2
Explanation:
the 35 is below 50 so it goes down, and it rounds down to 14.2 instead of, if if was, say, 14.62 then that would round up bc the decimal is higher than 50.
but since it is 235, then it rounds down to 14.2
stay safe, TPWK!
help me please I really need it
a) Magnesium, 2.8.2, Group number 2,Metals, They are not non metals.
b) Fluorine, 2.2.5, Group number7, Metal No, Non-Metal yes
c) Carbon, 2,2,2. Group number 4, Metal No, Non-Metal yes
_____________________________________Best Regards,'Borz'Different elements are most likely to react in similar ways when they
Answer:
Belong to the same group.
Explanation:
Different elements are most likely to react in similar ways when they belong to the same group.
This is because the elements in the same group always have similar number of valence electrons which implies that they all have the same number of electrons in their outermost shell. For example,barium (Ba), beryllium (Be), calcium (Ca), magnesium (Mg), radium (Ra), strontium (Sr) all have 2 electrons in their outermost shell and thus they belong to group 2 of elements which are known as Alkaline earth metals and they all tend to react in the same manner with other substances
The elements that has been belonging to the same group have been able to react in similar ways.
The reactivity of the elements has been based on the presence of the valence electrons. The elements that has been belonging to the same group have consisted of the same number of valence electrons with the increase in the number of shells moving from left to right.
Thus, the elements that have been belonging to the same group have consisted of the same reactive properties.
For more information about different elements, refer to the link:
https://brainly.com/question/17845581
For the following problems, identify the substance as either an element, a compound, or a mixture. Write E for Element, C for compound, and M for mixture. 34. Silicon ___E__ 35. Salad dressing __M___ 36. Table Salt (NaCl) __C___ 37. Oatmeal with apples and raisins_____ 38. Lithium _____ 39. Copper Sulfate (CuSO4) _____
Answer:
Explanation:
34. E
35. M
36. C
37. M
38. E
39. C
WILL GIVE BRAINLIEST how many moles are in 1.42x10^22 molecules of AlCl3?
3 is a subscript.
Answer: Many argue that modern chemical science began when scientists started ... Figure 3.2 The average mass of a chloroform molecule, CHCl3, ... 5.00gCu(molCu63.55g)(6.022×1023atomsmol)=4.74×1022atoms of copper
Explanation: hope this helps
Distinguishing Types of Waves through Examples
A 2-column table with 3 rows. The first column labeled mechanical waves has entries ocean water, light waves, earthquake waves. The second column labeled electromagnetic waves has entries sound waves, radiation waves, X-ray waves.
How should the table be changed to correctly distinguish between mechanical and electromagnetic waves?
Earthquake waves and radiation waves need to change places.
Light waves and X-ray waves need to change places.
Ocean waves and X-ray waves need to change places.
Sound waves and light waves need to change places.
Answer:
Sound waves and light waves need to change places.
Explanation:
Given table:
Mechanical waves Electromagnetic waves
Ocean water Sound waves
Light waves Radiation waves
Earthquake waves X-ray waves
From the given table, to be correct, light and sound waves must change their position.
Light wave is an electromagnetic wave
Sound wave is a mechanical wave
An electromagnetic wave does not require a material medium for propagation.
Mechanical waves require material medium for their propagation.
Mechanical waves Electromagnetic waves
Ocean water Light waves waves
Sound waves Radiation waves
Earthquake waves X-ray waves
Answer:
Sound waves and light waves need to change
Explanation:
NEED ANSWER NOW WILL GIVE BRAINLIEST!!!! What is the mass of an object that has an acceleration of 5.8m/s2 when a force of 18N is applied?
Answer:
The answer is 3.10 kgExplanation:
The mass of an object can be found by using the formula
[tex]m = \frac{f}{a} \\ [/tex]
f is the force
a is the acceleration
From the question we have
[tex]m = \frac{18}{5.8} \\ = 3.103448...[/tex]
We have the final answer as
3.10 kgHope this helps you
Answer:
i think it would be 35
Explanation:
r
What does an increase of 1 pH number represent?
Answer:
A one-point pH change indicates the strength of the acid or base has increased or decreased tenfold; a 2-point change indicates a 100-fold change in acidity or alkalinity, and a 3-point change in pH indicates a 1000-fold change. Examples: • An increase in pH from 7.0 to 8.0 means the water is 10 times more basic.
Explanation:
B. Drinking water can only be obtained
hom seawater by hallaka True. I False
Answer:
False
Explanation:
In coastal ecosystems as sea otters populations decline sea urchins populations
Increased
Decreased
Remained the same
None of the above
What do you think happens to Difluoroethane at –24°C? Provide evidence to support your claim.
Answer:
The following subsections explain the explanation according to the particular circumstance.
Explanation:
The boiling point seems to be the temperature beyond which the working fluid as well as the boiling phase would be at a predetermined pressure or voltage at equilibrium among one another and. The vapor or boiling temperature of 1,1 difluoroethane seems to be -25oC at 1 atm, although as a gas it can remain at a higher temperature around -24oC.Which part of project management involves determining possible risks?
Answer:
Resources
Explanation:
Answer:
Explanation:
M
Ozone consists of three oxygen atoms (O3) and water consists of two hydrogen atoms and one oxygen atom (H2O). Would you consider both products to be molecules?
Answer:
Yes, both are molecules
Explanation:
A molecule is the smallest particle of a substance that can exist alone and still retain the chemical properties of that substance.
Molecules are usually made up of two or more atoms of the same or different elements chemically combined together. for example, two atoms of hydrogen will combine to form a molecule of hydrogen gas. Similarly, an atom of hydrogen can combine with an atom of chlorine to form hydrogen chloride gas molecule.
Ozone is a molecule which consists of three atoms of oxygen chemically combined together.
Similarly, water is a molecule composed of two atoms of hydrogen and an atom of oxygen chemically combined together.
What is the pressure of 64 grams of O2 in a 1L container at a temperature of 10°C?
You have 16.6 g of water at 40.2 C. How many Joules are needed to warm the water to 44.8 C?
Answer:
Q = 319.49 J
Explanation:
Given that,
Mass, m = 16.6 g
Initial temperature, [tex]T_i=40.2^{\circ} C[/tex]
We need to find the heat needed to warm the water to 44.8 °C. The formula that is used to find the heat required is given by :
[tex]Q=mc\Delta T\\\\Q=mc(T_f-T_i)\\\\Q=16.6\ g\times 4.184\ J/g^{\circ} C\times (44.8-40.2)^{\circ} C\\\\Q=319.49\ J[/tex]
So, 319.49 J of heat is needed to warm water.
The reaction K(s) + 2H2O(l) → 2KOH(aq) + H2(g) is a decomposition reaction.
True
False
Answer:
Yes it is true reaction
Answer: yes it is true
Explanation: i took the test
Identify the following examples as either physical or chemical change.
(Ill give brainliest if right)
Answer:
19. Physical
20. Physical
21. Chemical
22. Physical
23. Chemical
24. Chemical
25. Physical
Explanation: