Answer:
D
Explanation:
Carbon has atomic number of 6 so it has 6 protons.
Concentrated nitric acid, HNO3, is 16.0 mol dm–3. What volume would you need to prepare 100 cm3 of 0.50 mol dm–3 HNO3?
The question requires us to calculate the volume of concentrated HNO3 solution (concentration = 16.0 mol/dm^3) to prepare 100 cm^3 of a 0.50 mol/dm^3 HNO3 solution.
We need to calculate the volume necessary from a concentrated solution to prepare a more dilluted solution. The number of moles of HNO3 in the solutions will not change, thus we can say:
[tex]n_1=n_2[/tex]where n is the number of moles of HNO3 and 1 and 2 refers to the initial solution and final solution, respectively.
The number of moles in a solution can be calculated as it follows:
[tex]C=\frac{n}{V}\to n=C\times V[/tex]where C is the concentration and V is the volume of the solution.
We can combine these two equations to have the following expression:
[tex]n_1=n_2\to C_1\times V_1=C_2\times V_2[/tex]With this expression, we can use the values given by the question to calculated the volume of the concentrated solution (V1) necessary to prepare a more dilluted solution:
[tex]\begin{gathered} C_1\times V_1=C_2\times V_2\to(16.0\frac{mol}{dm^3})\times V_1=(0.50\frac{mol}{dm^3})\times(100cm^3) \\ V_1=\frac{(0.50\text{ mol/dm}^3)\times(100cm^3)}{(16.0\text{ mol/dm}^3)}=3.12cm^3 \end{gathered}[/tex]Therefore, the volume necessary of concentrated HNO3 to prepare 100 cm^3 of 0.50 mol/dm^3 HNO3 solution is 3.12 cm^3.
Wine goes bad soon after opening because the ethanol CH3CH2OH in it reacts with oxygen gas O2 from the air to form water H2O and acetic acid CH3COOH, the main ingredient of vinegar.
What mass of water is produced by the reaction of 6.5g of ethanol?
Round your answer to 2 significant digits.
The mass of water produced in the oxidation reaction is 2.5 g.
What is oxidation reaction of ethanol?
Oxidation reaction of ethanol occurs when ethanol comes in contact with oxygen, producing water and acetic acid. This type of reaction can also produce carbon dioxide and water.
The oxidation reaction of ethanol and oxygen is given as;
CH₃CH₂OH + O₂ -----------> H₂O + CH₃COOH
Molecular mass of ethanol;
CH₃CH₂OH = (12) + (3 x 1) + (12) + (2 x 1) + (16) + (1) = 46 g/mol
Molecular mass of water;
H₂O = (2 x 1) + (16) = 18 g/mol
From the reaction above, we can infer the following;
46 g of ethanol ---------> 18 g of water
6.5 g of ethanol ---------?
= (6.5 x 18) / 46
= 2.54 g of water
Thus, the mass of water that is produced by the reaction of 6.5g of ethanol is 2.5 g.
Learn more about oxidation reaction here: https://brainly.com/question/27239694
#SPJ1
Classify each compound/molecule based on its ability to form a "Strong Electrolyte", "Weak Electrolyte", or "Nonelectrolyte" aqueous solution.
© (NH)2CO (Urea)
Urea is a nonelectrolyte.
What is a nonelectrolyte?A material that conducts electricity poorly and does not easily ionize when dissolved or melted.
Chemical substances that don't conduct electricity in any condition are called non-electrolytes. As a result, current does not flow through the solution since it does not add ions to it. Naphthalene, latex, and sugar solution are a few examples of covalent compounds that are not electrolytes. An object is an electrolyte if it is electrically conductive when it is liquid or dissolved. It is a nonelectrolyte if it does not conduct electricity while it is a liquid. In an aqueous solution, nonelectrolytes—such as sugar, alcohol, and many organic compounds—occur as uncharged molecules and do not conduct electrical current.
To know more about nonelectrolyte ,visit:
https://brainly.com/question/15079452
#SPJ9
A mineral is dropped into a weak acid and bubbles form.
What type of property does this demonstrate?
A pycnometer is a glass flask with a tight fitting glass stopper that can be used to determine the density of an insoluble solid by measuring the volume of water ejected out of the pycnometer when sample of the solid is placed in it. Determine the density in g/cm³ of an unknown metal alloy sample from the following measurements. Assume the density of water is 1.000 g/cm³.
Mass of clean pycnometer = 25.151 g
Mass of clean pycnometer plus water = 42.481 g
Mass of clean pycnometer plus metal sample = 39.605 g
Mass of clean pycnometer plus metal plus water = 54.265 g (after ejected water is dried from the outside surface)
The density in g/cm³ of an unknown metal alloy sample is 11.784g.
What does density mean?Mass per unit volume is the definition of density for a material. The ratio of mass to volume, or mass per unit volume, is what is meant by density. It gauges the amount of "stuff" contained within an object in relation to its volume (cubic meter or cubic centimeter). The degree to which matter is packed together firmly is fundamentally measured by density. The Greek scholar Archimedes is credited with discovering the principle of density. If you know the formula and are familiar with the relevant units, you can calculate the principle of density with ease. The formula for determining density is to take an object's mass (m) and divide it by its volume (v): = m / v. Density is typically denoted by the Greek symbol "."
The SI unit for density is the kilogram per cubic meter (kg/m3). centimeter (g/cm3).
Mass of clean pycnometer = 25.151 g
Mass of clean pycnometer plus water = 42.481 g
Mass of clean pycnometer plus metal sample = 39.605 g
Mass of clean pycnometer plus metal plus water = 54.265 g
54.265 g - 42.481 g
= 11.784 g
To know more about density ,visit:
https://brainly.com/question/12931951
#SPJ9
Which of the following statements concerning quantum mechanics is/are true?
1. The behavior of submicroscopic particles can sometimes be described as waves.
2. Quantum mechanics limits us to making statistical statements about the location of an electron in an atom.
3. The uncertainty principle is important only for particles of very small mass, such as the electron.
1. The behavior of submicroscopic particles can sometimes be described as waves - True
2. Quantum mechanics limits us to making statistical statements about the location of an electron in an atom - True
3. The uncertainty principle is important only for particles of very small mass, such as the electron - True
What is quantum mechanics?Quantum mechanics is the branch of science that deals with the particles that we have in the atom. The study of quantum mechanics led us to appreciate the position of the electrons that are found in the atom.
The spear head of the study of quantum approach to the atom was Erwin Schrodinger when he proposed the wave mechanical model of the atom.
Learn more about quantum mechanics;https://brainly.com/question/11855107
#SPJ1
How many moles of N are in 0.179 g of N₂O?
0.008134 moles of N are in 0.179 g of N₂O.
1mole = 6.022 ×1023 number of moles of atoms or molecules or ions
Number of moles = Mass /molar mass
Number of moles of N2O = 0.179g/44.014g/mol = 0.004067mol
one mole of N2O contains two moles of N
Number of moles of N = 2× 0.004067 = 0.008134 moles.
What is mole fraction ?
The mole fraction can be calculated by dividing the number of moles of one factor in the reaction by the total number of moles of all impurities in the solution. It should be noted that the sum of the mole fractions of all components of the solution must be equal to one.
A mole fraction is a unit of attention. the relative amount of solute and solvent in the reaction is measured as a mole fraction and reported. Mole fraction is the wide range of moles of a given substance in solution divided by the total range of moles.
To learn more about mole fraction, visit;
https://brainly.com/question/28196871
#SPJ13
86. Which electron configuration notation describes an
atom in an excited state?
A. [Ar]4s23d¹04p²
B. [Ne]3s23p5
C. [Kr]5s²4d¹
D. [Ar]4s²3d84p¹
Electron configuration notation describes an atom in an excited state as [Ar]4s²3d84p¹. Option D.
An electron is in an excited state when it temporarily occupies a higher energy state than its ground state. Electrons are excited when additional energy is supplied. When it absorbs a photon or packet of light or collides with a nearby atom or particle.
When an electron absorbs energy and shifts from a lower energy orbital to a higher energy atomic orbital the atom assumes an exciting electronic configuration. Usually an unstable electronic configuration. As a result, the electron returns to the ground state and releases a certain amount of energy. Ground state means the state with the lowest energy. When an electron absorbs energy and pops into an outer orbit, this state is called an excited state.
Learn more about An excited state here:-https://brainly.com/question/13752626
#SPJ1
Interpret the following equation for a chemical reaction using the coefficients given: N2(g) + 2 O2 (g) = 2 NO2 (g)
Interpretation of equation for a chemical reaction using the coefficients
On the particulate level: 1 molecule of N₂(g) reacts with 1 molecule of 2O₂(g) to form 2 molecules of NO₂(g).
On the molar level: 1 mole of N₂(g) reacts with 1 mole of 2O₂(g) to form 2 moles of NO₂(g).
What is a chemical reaction?chemical reaction: a process in which one or more substances—the reactants—are changed into one or more additional substances—the products. Chemical elements and compounds are both substances. To produce different substances as products, a chemical reaction rearranges the atoms that make up the reactants. Technology, culture, and life itself are all influenced by chemical reactions.
Numerous activities that involve chemical reactions have been known and used for thousands of years, including burning fuels, smelting iron, creating glass and pottery, brewing beer, and producing wine and cheese.
Numerous intricate processes that take place in all living systems, as well as the Earth's geology, atmosphere, and oceans, involve chemical reactions.
We have given the following chemical reactions
N₂(g) + 2O₂(g) → 2NO₂(g)
The changes in two levels, the particulate level and the molar level, can be interpret using the balanced equation.
On the particulate level, we always consider discrete molecules.
On the particulate level: 1 molecule of N₂(g) reacts with 1 molecule of 2O₂(g) to form 2 molecules of NO₂(g).
We think in terms of moles On the molar level, considering 1 mole of particles = 6.02 × 10²³ particles.
On the molar level: 1 mole of N₂(g) reacts with 1 mole of 2O₂(g) to form 2 moles of NO₂(g).
Learn more about Chemical reactions
https://brainly.com/question/14120101
#SPJ9
Copper metal has a density of 8.96 G/cm^3. What volume (in cm) does a 26.0 g piece of Cu occupy?
The volume (in cm) does a 26.0 g piece of Cu is 2.90 cm³.
Density is the substance's mass in keeping with a unit of volume. The image most often used for density is ρ, despite the fact that the Latin letter D also can be used. Mathematically, density is defined as mass divided by volume.
Mass, extent, and density are three of an object's maximum simple residences. Mass is how heavy something is, quantity tells you how big it is, and density is mass divided through volume. although mass and extent are houses you deal with each day, the concept of density is a little much less obvious and takes a cautious idea.
The components for density are the mass of an object divided by means of its volume. In equation shape, it is d = m/v, in which d is the density, m is the mass and v is the volume of the object. the standard devices are kg/m³.
Density = mass / volume
Volume = mass/density
= 26/8.96
= 2.90 cm³
Learn more about density here:-https://brainly.com/question/1354972
#SPJ1
Why do you think the temperature does not change much during a phase change? If possible, discuss your answer with your classmates and teacher
There's no increase in the kinetic energies of the particles, and hence no rise in temperature, because the energy required for phase shifts is employed to break bonds.
Briefing :If the pressure around a solid, liquid, or gas stays constant throughout a phase shift, the temperature will not change. In other words, once a liquid hits its boiling point, the temperature won't rise any further until the entire volume of the liquid has transformed into a gas.
How temperature and energy during a phase change are correlated?As a solid transforms into a liquid during a phase change, its temperature stays constant because the heat energy is converted to potential energy. Similarly, when heat is supplied to a liquid, the temperature rises as the molecules once more move more quickly.
To know more about potential energy :
https://brainly.com/question/24284560
#SPJ9
what us a bond between a positive and a negative ion called
Answer: ionic bond
Explanation:
Butane gas (C4H10) burns in oxygen gas to produce carbon dioxide gas and water vapor. Balance the equation for this reaction (in the lowest multiple integers).What are the formulas for the reactants and products?
The balanced chemical equation for the reaction between butane gas and oxygen gas is as follows: 2C₄H₁₀ + 13O₂ → 8CO₂ + 10H₂O
What is combustion reaction?Combustion reaction is a process wherein a fuel is combined with oxygen, usually at high temperature, releasing heat.
According to this question, a combustion reaction occurs between butane gas and oxygen gas to form carbon dioxide and water vapor.
2C₄H₁₀ + 13O₂ → 8CO₂ + 10H₂O
The formula of the reactants of this combustion reaction are as follows; C₄H₁₀ and O₂ while the formula of the products are as follows; CO₂ and H₂O.
Learn more about combustion reaction: https://brainly.com/question/12172040
#SPJ1
Bart and Homer are building a mini nuclear reactor to put in the backyard (don't try this at home). They need rectangles of metal for their reactor casing. Bart and Homer each measure the perfect sized sheet of metal, but with different tape measures. Homer records 2.6m X 4.4m X 3.0m. Bart records 2.65m X 4.38m X 3.05m.
After taking sig figs into account, what will be the difference in their volume measurements in m3?
(Hint: remember you need to do the correct type of sig fig/rounding every time you hit the equal sign)
The difference is ______ m3
The difference in volume measured by Bart and Homer is equal to 1.08 m³.
What is the volume of the rectangular prism?The volume of a rectangular prism is calculated by multiplying the length, breadth, and height of the rectangle. A prism consists of 2 parallel rectangular bases and four rectangular faces.
It contains six flat rectangular faces and all the angles between faces are right-angled.
The volume of a rectangular prism = l × b × h
Where “b” is the base length “l” is the base width and “h” is the height of the rectangular prism.
If the nuclear reactor is made from a rectangular sheet then we can consider the metal sheet as a rectangular prism.
The Homer's volume of metal sheet = 2.6m × 4.4m × 3.0m = 34.32 m³
The Bart's volume of metal sheet = 2.65m × 4.38m × 3.05m = 35.40 m³
The difference between Bart's volume and Homer's volume is :
= 35.40 m³ - 34.32 m³
= 1.08 m³
Therefore, the difference between the volume of the metal sheet measured by Bert and Homer is 1.08m³.
Learn more about the volume of rectangle, here:
https://brainly.com/question/12354478
#SPJ1
look at the picture
The different types of neon with varied numbers of neutrons are best referred to as isotopes.
What are isotopes?In chemistry, isotopes are atoms of the same elements. These atoms have the same number of protons in their nuclei. Thus, they have the same atomic number.
However, isotopes of the same elements do not have the same number of neutrons in their nuclei. Thus, isotopes have the same number of protons but different mass numbers because of the difference in the number of neutrons.
Now consider different neon atoms with 10, 11, and 12 neutrons. These atoms are best described as isotopes of neon.
More on isotopes can be found here: https://brainly.com/question/11680817
#SPJ1
) Describe five mechanisms that promote aggregation in soils.
Answer:
wetting and drying
cultivation
freezing and thawing
particle size
Earthworm
An unknown substance has a specific heat capacity of 2.22 J/g °C. If 92.3 grams are heated with 1,760.0 joules of energy, what will the change in temperature be?
An unknown substance has a specific heat capacity of 2.22 J/g °C. If 92.3 grams are heated with 1,760.0 joules of energy the change in temperature be will be 360°C
Specific heat is defined by the amount of heat needed to raise the temperature of 1 gram of a substance 1 degree celsius (°C)
Here given data is unknown substance
Specific heat capacity means Q = 2.22 J/g °C
Mass = 92.3 grams and
C = 1,760.0 joules and
We have to calculate change in temperature = ?
So the formula is Q = mc×ΔT
2.22 J/g °C = 92.3 ×1,760.0 joules×ΔT
ΔT = 360°C
So the change in temperature be360°C
Know more about specific heat capacity
https://brainly.com/question/3977170
#SPJ1
When the solid and liquid phases of a substance are present. simultaneously, which phase, the solid or the liquid, contains the greater amount of energy per particle? In which phase are the particles moving faster? Explain your answer
To learn more about states of matter refer to :
https://brainly.com/question/16982523
#SPJ13
how many molecules O2 has in 32 oxygen?
Answer:
One mole of oxygen gas, which has the formula O2, has a mass of 32 g and contains 6.02 X 1023 molecules of oxygen but 12.04 X 1023 (2 X 6.02 X 1023) atoms, because each molecule of oxygen contains two oxygen atoms.
In argon Fluoride laser used in some reflective eye surgeries of electro magnetic radiation at a wavelength of 193.3nm what is the frequency of the a A
RF lasers radiation what is the
energy of a single quantum of the radiation
In argon Fluoride laser used in some reflective eye surgeries of electro magnetic radiation at a wavelength of 193.3nm then the frequency is 1.72×10⁶Hz
Electromagnetic radiation is the is the form of energy that propagated both as electrical and magnetic waves traveling in packets of energy called photons
Here given data is
Wavelength = 193.3nm
Velocity = 3×10⁸m/sec
We have to find frequency = ?
Then the formula is V = λf
So rearrange this formula
f = V/ λ
f = 3×10⁸m/sec/193.3nm
f = 1.72×10⁶Hz
Know more about frequency
https://brainly.com/question/14610151
#SPJ1
Balance the equation KO2(s)+CO2(g)→K2CO3(s)+O2(g)
The balanced equation is
4 KO2(s) + 2 CO2(g) = 2 K2CO3(s) + 3 O2(g).
What is the are balanced equation?The law of conservation of mass states that the mass of the reactants and products of a chemical reaction should be equal. The amount of atoms for each element doesn't really increase as a consequence of the chemical reaction. Thus, the chemical equation illustrating the chemical process must be balanced. A chemical equation is said to be balanced when the number of atoms involved on the reactants and products sides are equal.
Here are the steps we need to do in order to balance an equation:
Each element's atoms in the reactants and products should be counted.Use coefficients and add them before the compounds as necessaryTo know more about balanced equation , visit:
https://brainly.com/question/28777563
#SPJ9
A titration procedure between H2SO4 and LiOH required a volume of 15.50 ml of 0.1000 M LIOH solution to reach the end point. If this titration utilized 20.00 ml. of H2SO4
what is the molarity of this H2SO4 solution?
Express your answer using four sig figs
The molarity of the 20 mL H₂SO₄ solution required for the titration is 0.0388 M
How do I determine the molarity of H₂SO₄We can obtain the molarity of the H₂SO₄ solution by doing the following:
H₂SO₄ + 2LiOH —> Li₂SO₄ + 2H₂O
The mole ratio of the acid and base obtained from the equation is:
The mole ratio of the acid, H₂SO₄ (nA) = 1The mole ratio of the base, LiOH (nB) = 2From the question given, we obtained the following:
Volume of base, LiOH (Vb) = 15.50 mLMolarity of base, LiOH (Mb) = 0.1000 MVolume of acid, H₂SO₄ (Va) = 20 mLMolarity of acid, H₂SO₄ (Ma) =?MaVa / MbVb = nA / nB
(Ma × 20) / (0.1 × 15.5) = 1 / 2
(Ma × 20) / 1.55 = 1 / 2
Cross multiply
Ma × 20 × 2 = 1.55
Ma × 40 = 1.55
Divide both side by 40
Ma = 1.55 / 40
Ma = 0.0388 M
Learn more about titration:
https://brainly.com/question/28041246
#SPJ1
A 8.54 g solid sample of sodium hydroxide is dissolved in 111.5 g of water in a coffee cup calorimeter. By how many degrees will the temperature of the solution rise? The heat of solution for solid sodium hydroxide is 44.5 kJ/mol.
Based on the heat of solution, the increase in temperature rise when an 8.54 g solid sample of sodium hydroxide is dissolved in 111.5 g of water in a coffee cup calorimeter is 95.48 K.
What is the temperature rise when an 8.54 g solid sample of sodium hydroxide is dissolved in 111.5 g of water in a coffee cup calorimeter?The increase in temperature rise when an 8.54 g solid sample of sodium hydroxide is dissolved in 111.5 g of water in a coffee cup calorimeter is determined using the formula below:
ΔH = m * c * ΔTmass of water = 111.5 g
c = 4.18 J/g.K
Heat of solution, ΔH = 44.5 kJ/mol
ΔT = ?
Mole of NaOH in 8.54 g NaOH = 8.54/40
Mole of NaOH in 8.54 g NaOH= 0.2135 mol of NaOH
Solving for ΔT;
44.5 kJ/mol = 111.5 * 4.18 * ΔT
44.5 kJ/mol = 466.07 * ΔT
ΔT = 44.5 / 466.07
ΔT = 95.48 K
Learn more about heat of solution at: https://brainly.com/question/28169738
#SPJ1
• When dissolved 1.93 g of HNO₂ acid (M.W = 47) and dilute
the volume to 500 ml the H concentration in the solution was
7.63X10³ M, calculate the dissociation constant of K
a?
The dissociation constant of Ka is 7.83 × 10³ .
What does molar mass mean?In chemistry, the molar mass of a chemical compound is determined by dividing its mass by the quantity of the material, or the number of moles in the sample, expressed in moles. A substance's molar mass is a bulk attribute, not a molecular one. Mass per mole is one way to define molar mass. Molar mass is, in other words, the total mass of all the atoms in a substance that makes up a mole. It is quantified in grams per mole.
Molar mass is shown for substances or molecules. The molar mass of a single element or atom would simply be that element's mass represented in atomic mass units.
Mass of HN[tex]O_{2}[/tex] = 1.93g
Volume of solution = 500 ml
[tex]H^{+}[/tex] equilibrium = 7.63 × [tex]10^{3}[/tex] m
Molarity of HN[tex]O_{2}[/tex] = mol [tex]HNO_{2}[/tex] /vol in2
mol [tex]HNO_{2}[/tex]
= mass(g) / molar mass
= 1.93/42.0129 g/mol
= 0.04105
Hence ,
molarity of HNO2
= 0.04105/0.5L
= 0.0821 M
Reaction
HNO2 ⇄ H+ NO2
x = [tex]H^{+[/tex] = 7.63 × [tex]10^{3}[/tex] M
= 0.0821 - 7.63 [tex]10^{3}[/tex]
= 0.0821 - 0.00763
= 0.0745 m
[tex]H^{+}[/tex] = 7.63 × [tex]10^{3}[/tex]
[tex]NO_{2}[/tex] = x = 7.63 × [tex]10^{}[/tex]³
Dissociation of constant ka
ka = [tex]H ^{+} NO_{2} ^{-}[/tex]/ HNO²
=[tex]10^{3}[/tex] × 7.83
To know more about molar mass , visit:
https://brainly.com/question/20552052
#SPJ9
Practice
5. The Republic of China presented one of the world's largest flags to the city of
Kaohsiung in 1989. The flag of the Republic of China measured 1.26 × 10^4 cm
by 8.40 x 10³ cm. What is the area of this flag in square centimeters?
The area of this flag in square centimeters is 10.58 × [tex]10^{7} cm^{2}[/tex].
What is the area of a rectangle?The quantity of unit squares that fit inside a shape determines its area. A unit square is a square having a side of one unit, as "unit" here denotes one (1). The total number of unit squares that are contained within a rectangle's perimeter is hence its area. Or, you can refer to the area of the rectangle as the region included within the rectangle's envelope. The rectangular tiles that make up your home are a fantastic illustration of form. The number of tiles on the floor makes it simple to calculate how much area it takes up. You may calculate the rectangle's area using this as well. A number of unit squares equal the area of a rectangle.
Area of flag = area of a rectangle
= l × b
= 1.26 × [tex]10^{4}[/tex] × 8.40 ×[tex]10^{3}[/tex]
= 10.58 × [tex]10^{7}[/tex] [tex]cm^{2}[/tex]
To know more about the area of a rectangle, visit:
https://brainly.com/question/2607596
#SPJ9
I need help with this!
Answer:
1. Fe: 26, 26, 30
2. Rh: 45, 45, 58
3. Sr: 38, 38, 50
4. Li: 3, 3, 4
5. Bi: 83, 83, 126
Explanation:
Protons = electrons = atomic number
Atomic mass - atomic number = neutron
A weather balloon filled with helium has a volume of 125 ft³ at launch, where the temperature is 27 C. When the
balloon reaches an altitude of 45,000 meters where the temperature is -73C, its volume has increased to 94,000 ft³.
Assuming the atmospheric pressure was 755 mmHg at launch, what is the pressure (in mmHg) at 45,000 m?
The pressure (in mmHg) at 45,000 m, given it was 755 mmHg at launch is 0.669 mmHg
How to determine the pressure (in mmHg) at 45,000 mThe folloeing data were obtained from the question:
Initial volume (V₁) = 125 ft³Initial temperature (T₁) = 27 °C = 27 + 273 = 300 K Initial pressure (P₁) = 755 mmHgNew temperature (T₂) = -73 °C = -73 + 273 = 200 KNew volume (V₂) = 94000 ft³New pressure (P₂) = ?The new pressure of the gas at 45000 m can be obtained by using the combined gas equation as illustrated below:
P₁V₁ / T₁ = P₂V₂ / T₂
(755 × 125) / 300 = (P₂ × 94000) / 200
Cross multiply
P₂ × 94000 × 300 = 755 × 125 × 200
P₂ × 28200000 = 18875000
Divide both sides by 28200000
P₂ = 18875000 / 28200000
P₂ = 0.669 mmHg
From the calculation made above, we can conclude that the pressure at 45000 m is 0.669 mmHg
Learn more about gas laws:
https://brainly.com/question/15343985
#SPJ1
Compare the behavior of the mixture of gases with each solitary gas in the presence of flame.
The heat made by a mixture of gases is less than that produced by solitary gases of hydrogen or oxygen.
How are the gases behave in the mixture?The property becomes a solution of a homogeneous mixture. Some of the effects of gas mixtures are easy to control. if we know the composition of the gases in the mix. In gas mixtures, all components in the gas phase can be used separately. The atmosphere is a mixture of different gases. The part, usually present in solution, first has to be atomized in a flame. Premixed combustion flame, a mixture of fuel and oxidant gas, and diffusion. compared to liquid streams, is relatively simple because the bulk characterization of a single phase is implicit. However, when gas. The heat produced by a mixture of gases is less than that produced by solitary gases. of hydrogen or oxygen.
so we can conclude that the flame appears yellow if there are impurities in the air whereas a pure hydrogen gas flame will not produce any smoke.
Learn more about gases here: https://brainly.com/question/25736513
#SPJ1
Calculate how many grams of Fe2O3 (molar mass 159.70 g/mol) are formed when 16.7 g of Fr react completely with O2.4 Fe + 3 O2—> 2 Fe2O3
The first step to solve this question is to convert the given amount of grams of Fe to moles using its molecular weight.
[tex]16.7gFe\cdot\frac{mol}{55.845gFe}=0.3molFe[/tex]According to the given reaction, 4 moles of Fe produce 2 moles of Fe2O3. Use this ratio to find how many moles of Fe2O3 are formed:
[tex]0.3molFe\cdot\frac{2molFe_2O_3}{4molFe}=0.15molFe_2O_3[/tex]Convert this amount of moles to grams using Fe2O3 molar mass:
[tex]0.15molFe_2O_3\cdot\frac{159.70g}{molFe_2O_3}=23.9g[/tex]It means that 23.9 grams of Fe2O3 are formed.
5. What is the volume of 10 moles of a gas at 300 K held at a pressure of 3.5 atm?
70.33 L is the volume of 10 moles of a gas at 300 K held at a pressure of 3.5 atm.
What is volume?Volume is the percentage of a liquid, solid, or gas's three-dimensional space that it occupies.
Liters, cubic metres, gallons, millilitres, teaspoons, and ounces are some of the more popular units used to express volume, though there are many others.
We will use ideal gas law to find the volume
PV = nRT
Can also be written as
V = (nRT)/P
Where,
P = pressure
V = volume
n = amount of substance
R = ideal gas constant
T = temperature
Here, we have given
P = 3.5 atm
V = to find
n = 10 moles
R = 0.08206 L⋅atm/K⋅mol
T = 300k
Lets substitute the values
V = (10 × 0.08206 × 300)/3.5
V = 70.33 L
Learn more about volume
https://brainly.com/question/463363
#SPJ10