Which of the following identifies three advantages of PLM software?

reduced cost, faster marketing, and process transparency

faster marketing, process transparency, and outsourcing

process transparency, outsourcing, and reduced cost

outsourcing, reduced cost, and faster marketing

The requirements schedule is a vital tool in production management that aids the allocation of production resources. The requirement schedule shows the quantity and timing of raw materials, finished products, labour force, and machinery required to produce goods and services.

To meet the capacity constraints of the above problem, a modified requirement schedule will be drawn.

The modified requirement schedule will comprise the two constraint variables that are available.

Capacity r = (20, 40, 100, 35, 80, 75, 25), C= (60, 60, 60, 60, 60, 60, 60).

From the above constraint variables, we can calculate the available capacity.

Using the formula: Available capacity (AC) = Capacity – Requirement.

We have AC = C – R. The requirement schedule is given in the table below:

Items  | Period 1  | Period 2  | Period 3  | Period 4  | Period 5  | Period 6  | Period 7A        |   10        |  10          |  20          |   10        |  10          |  10          |   10B        |   20        |  10          |  20          |   10        |  10          |  20          |   20C        |   20        |  30          |  20          |   20        |  20          |  20          |   20D        |   10        |  20          |  10          |   20        |  10          |  10          |   10E        |   30        |  30          |  20          |   20        |  20          |  30          |   30F        |   20        |  20          |  20          |   20        |  20          |  20          |   20G       |    30        |  20          |  10          |   20        |  30          |  20          |   10

The available capacity (AC) will be:AC = C – RItems  | Period 1  | Period 2  | Period 3  | Period 4  | Period 5  | Period 6  | Period 7A        |   50        |  50          |  80          |   50        |  50          |  50          |   50B        |   40        |  50          |  40          |   50        |  50          |  40          |   40C        |   40        |  30          |  40          |   40        |  40          |  40          |   40D        |   50        |  40          |  50          |   40        |  50          |  50          |   50E        |   30        |  30          |  40          |   40        |  40          |  30          |   30F        |   40        |  40          |  40          |   40        |  40          |  40          |   40G       |    30        |  40          |  50          |   40        |  30          |  40          |   50

The available capacity (AC) will be used to generate the modified requirement schedule, which is given in the table below:Items  | Period 1  | Period 2  | Period 3  | Period 4  | Period 5  | Period 6  | Period 7A        |   20        |  20          |  30          |   20        |  20          |  20          |   20B        |   20        |  10          |  20          |   10        |  10          |  20          |   20C        |   20        |  30          |  20          |   20        |  20          |  20          |   20D        |   10        |  20          |  10          |   20        |  10          |  10          |   10E        |   10        |  10          |  10          |   10        |  10          |  10          |   10F        |   20        |  20          |  20          |   20        |  20          |  20          |   20G       |    25        |  20          |  10          |   20        |  25          |  20          |   10

Note that the values in the modified requirement schedule are equal to the lower of the original requirement and the corresponding available capacity. Hence, the capacity constraints are met. The modified requirement schedule represents the modified requirement that satisfies the available capacity.

know more about requirement schedule

https://brainly.com/question/28288813

#SPJ11

**Regarding software, the following statements are true:** Software refers to a collection of instructions and data that tell a computer how to perform specific tasks.

It is intangible and exists in the form of programs, applications, or operating systems. **Software can be customized to meet specific user requirements** and is often updated or upgraded to improve functionality or fix bugs.

Software can be classified into two main categories: system software and application software. **System software** includes the operating system, device drivers, and utilities that manage computer hardware and provide a platform for running applications. **Application software** encompasses programs designed for specific tasks, such as word processing, graphic design, or video editing.

Software development involves several stages, including design, coding, testing, and maintenance. It can be developed using different programming languages and frameworks, depending on the intended purpose and platform. Software development methodologies, such as agile or waterfall, help streamline the process and ensure efficient project management.

In conclusion, software plays a crucial role in enabling computers to perform various tasks, and it can be tailored to meet specific needs. It is classified into system and application software categories, and its development follows a structured process.

Learn more about Software here:

https://brainly.com/question/32393976

#SPJ11

the inverse z-transforms are :-

a) (1/2) * (n + 1)

b) (1/2)^n

c) (3/2) * (-1)^n + (1/2) * (-1)^n * (n + 1)

d) (1/2)^n * (n + 1)

e) (-1)^n + (1/2)^n * cos(nπ/2)

The inverse z-transform is used to convert a function in the z-domain (represented by a rational function in z) back to the time-domain (represented by a discrete-time sequence). To compute the inverse z-transform, we need to identify the form of the function and apply the appropriate formula or technique. In this case, the given functions are in rational form, so we use partial fraction decomposition and known z-transform properties to determine the inverse z-transforms. The resulting inverse z-transform expressions provide the discrete-time sequences corresponding to the given z-domain functions.

Learn more about z-transforms here :-

https://brainly.com/question/14979001

#SPJ11

Answer:

57.14 N/mm2

Explanation:

Answer: Both technicians A and B

Explanation:

I took the pf test

we have demonstrated that the total flux under each pole face is ϕ = 2rlBM.

To demonstrate that the total flux under each pole face is given by ϕ = 2rlBM, we can calculate the flux using the given flux density distribution equation and integrate it over the surface area of the pole face.

The flux density distribution equation is given as:

B = BM * cos(ωmt - α)

Let's consider one pole face of the stator, which has a circular shape with a radius r and length l.

To find the total flux under the pole face, we need to integrate the flux density over the area of the pole face.

The area of the pole face can be calculated as:

A = π * r^2

Now, we can calculate the total flux by integrating the flux density over the area:

ϕ = ∫∫B * dA

Substituting the value of B from the given equation, we have:

ϕ = ∫∫(BM * cos(ωmt - α)) * dA

Since the flux density is constant over the entire pole face, we can take it out of the integral:

ϕ = BM * ∫∫cos(ωmt - α) * dA

Now, we can evaluate the integral over the area of the pole face:

ϕ = BM * ∫∫cos(ωmt - α) * dA

= BM * ∫∫cos(ωmt - α) * r * dr * dl

= BM * r * l * ∫∫cos(ωmt - α) * dr * dl

Integrating with respect to r and l, we get:

ϕ = BM * r * l * ∫∫cos(ωmt - α) * dr * dl

= BM * r * l * [sin(ωmt - α)] * ∫∫dr * dl

= BM * r * l * [sin(ωmt - α)] * A

Since the integral of dr * dl over the area A gives the total area, we have:

∫∫dr * dl = A

Therefore, the total flux under each pole face is given by:

ϕ = BM * r * l * [sin(ωmt - α)] * A

= BM * r * l * [sin(ωmt - α)] * π * r^2

= 2rlBM

Know more about total flux here:

https://brainly.com/question/30565198

#SPJ11

the picture is blank for me what does it say i can comment the answer plz mark brainlyist

Answer:

Attached below

Explanation:

Attached below is the schematic diagram of a small cube representing volume of material and all the six independent components of strains that will determine the state of strain  

Note : Attached below is a free hand diagram of the cube indicating the six independent components of strains  and a screen shot of the change in shape produced by each of the normal strain and shear strain components

( drawn with online tools )

Sure! Here's an example MATLAB program that solves a system of linear equations using Cramer's Rule for a 3x4 matrix:

```matlab

% Input the coefficient matrix

A = input('Enter the coefficient matrix A (3x3): ');

% Input the constant matrix

B = input('Enter the constant matrix B (3x1): ');

% Calculate the determinant of the coefficient matrix

det_A = det(A);

% Initialize the solution vector

X = zeros(3, 1);

% Apply Cramer's Rule

for i = 1:3

   % Create a temporary matrix by replacing the i-th column with the constant matrix

   temp_A = A;

   temp_A(:, i) = B;

   % Calculate the determinant of the temporary matrix

   det_temp_A = det(temp_A);

   % Calculate the solution for the i-th variable

   X(i) = det_temp_A / det_A;

end

% Display the solution

disp('The solution for the system of linear equations:');

disp(X);

```

In this program, the user is prompted to enter the coefficient matrix `A` (3x3) and the constant matrix `B` (3x1). The determinant of matrix `A` is calculated using the `det` function in MATLAB. The program then uses a loop to apply Cramer's Rule by replacing each column of `A` with `B` and calculating the determinants of the resulting matrices. Finally, the solution vector `X` is displayed, representing the values of the variables in the system of linear equations.

Learn more about  MATLAB program here:

https://brainly.com/question/32416063

#SPJ11

An effective system proposal report should provide detailed and specific, covering every aspect of the answer.

Let's discuss the characteristics of an effective system proposal report. An effective system proposal report should be a clear and concise document that conveys the key points. It is the document that outlines the plan for a new or updated system. The proposal should address a specific problem, need, or issue within an organization or community and offer a solution to address that issue. A proposal should be written for any potential reader, such as stakeholders, funders, decision-makers, and community members.

The proposal should contain the following essential components:

know more about effective system proposal

https://brainly.com/question/30161137

#SPJ11

Answer:

Vgr = 0.122 = 12.2 vol %

Explanation:

Density of ferrite = 7.9 g/cm^3

Density of graphite = 2.3 g/cm^3

compute the volume percent of graphite

for a 3.9 wt% cast Iron

W∝ =  (100 - 3.9) / ( 100 -0 ) = 0.961

Wgr = ( 3.9 - 0 ) / ( 100 - 0 ) = 0.039

Next convert the weight fraction to volume fraction using the equation attached below

Vgr = 0.122 = 12.2 vol %

A practice to ensure threads finish a required method before another thread starts is to use the synchronized keyword in the method header.

A thread in Java is a lightweight process that executes independently. It is a different execution path from the main thread. Threads are often referred to as lightweight because they share the same memory space as the primary thread.The use of threads enhances program performance because it enables the application to use multiple threads simultaneously to accomplish a task. It is because of the concurrent execution of two or more parts of a program that use threads.The synchronized keyword in

the method header is used to ensure that threads complete a required method before another thread starts. The synchronized keyword is used to mark a method as synchronized, which implies that only one thread can execute the method at a time.The synchronized keyword is used with the aim of avoiding data inconsistencies and conflicts that may arise when two or more threads try to access the same memory concurrently. So, the answer is option B) synchronized.Explanation:

Learn more about synchronized keyword here,

https://brainly.com/question/24279262

#SPJ11

This question is incomplete, the missing image in uploaded along this answer below.

Answer:

The required stress is 200 Mpa

Explanation:

Given the data in the question;

diameter D = 12 mm = 12 × 10⁻³ m

Length L = 188 mm = 188 × 10⁻³ m

Poisson's ratio v = 0.34

Reduction in diameter Δd = 0.0105 mm = 0.0105 × 10⁻³ m

The transverse strain will;

εˣ = Δd / D

εˣ = -0.0105 × 10⁻³ /  12 × 10⁻³ m

εˣ = -0.00088

The longitudinal strain will be;

[tex]E^z[/tex] = - ( εˣ  / v )

[tex]E^z[/tex] = - ( -0.00088  / 0.34 )

[tex]E^z[/tex] = - ( - 0.002588 )

[tex]E^z[/tex] = 0.0026

Now, Using the values for strain, we get the value of stress from the graph provided in the question, ( first image uploaded below.

From the graph, in the Second image;

The stress is 200 Mpa

Therefore, The required stress is 200 Mpa

The counter will begin counting at 5 (101) and will count down to 1 (001), which is the largest odd number that can be represented in three bits.

A counter is a digital device that records (or counts) the number of times a particular event occurs. Synchronous counters are counters that use a common clock signal to drive all flip-flops. The output of one flip-flop is linked to the input of the following flip-flop. The last flip-flop in a counter is referred to as the modulus of the counter. Here, we'll design a 3-bit synchronous counter that counts the odd numbers in decreasing order. We will use a T-flip-flop in this case.A T-flip-flop is a flip-flop that toggles its output (Q) at each rising edge of a clock signal when its T input is high (1).A 3-bit counter can count from 0 to 7, and since we want the counter to count down odd numbers, it must begin at 5 (101 in binary).To create a synchronous counter, the output of one flip-flop is connected to the input of the next flip-flop. The flip-flops must all operate on the same clock signal. The output of the last flip-flop (the modulus) is connected to the input of the first flip-flop, creating a circular arrangement. The following is the logic table for the 3-bit synchronous counter that counts odd numbers in decreasing order:So, the counter will begin counting at 5 (101) and will count down to 1 (001), which is the largest odd number that can be represented in three bits.  

Learn more about 3-bit synchronous counter here,

https://brainly.com/question/15564715

#SPJ11

The values of H and T for 100% saturation are H2 = 0.061 kg H2O/kg dry air and TC = 2.2°C.

(a) The final values of H and TC:
The values of H and TC can be calculated using the following formula:  Humidity ratio, w = mass of water vapour/mass of dry air. TC = Dry bulb temperature - Wet bulb temperature. So, it can be calculated as follows:
The initial condition is as follows:
The temperature of air, Ta = 82.2°C
Humidity of air, Ha = 0.0655 kg H2O/kg dry air

It is known that the air is contacted in an adiabatic saturator with water and leaves at 80% saturation.

Relative humidity of the air, Rh = 80%
The temperature of air, Ta = 80°C
Using the given values, the final values of H and TC can be calculated.

From the steam table, the vapour pressure at Ta = 82.2°C and Ha = 0.0655 kg H2O/kg dry air is P1 = 1.1894 kPa.

At 80% saturation, the vapour pressure is Pv = 0.8P2.
The temperature of saturated air, Ts = 80°C
The difference between the dry bulb temperature and wet bulb temperature, TC can be calculated using the formula:
TC = Ta - Ts
TC = 2.2°C

The saturation vapor pressure at 80°C is 4.2435 kPa. Therefore, P2 = 0.8(4.2435) = 3.3948 kPa.
The final humidity can be calculated as:
H2 = 0.622P2/(Pa - P2)
H2 = (0.622 × 3.3948)/(101.325 - 3.3948)
H2 = 0.046 kg H2O/kg dry air

(b) The values of H and T for 100% saturation:
When the relative humidity of the air is 100%, it becomes saturated air. The values of H and T can be calculated as follows:
The vapor pressure of saturated air at T = 80°C is 4.2435 kPa. Therefore, the final humidity can be calculated as:
H2 = 0.622Pv/(Pa - Pv)
H2 = (0.622 × 4.2435)/(101.325 - 4.2435)
H2 = 0.061 kg H2O/kg dry air
The final temperature can be calculated as:
TC = Ta - Ts
TC = 2.2°C

Therefore, the values of H and T for 100% saturation are H2 = 0.061 kg H2O/kg dry air and TC = 2.2°C.

know more about relative humidity

https://brainly.com/question/30415486

#SPJ11

Answer:

The empire builder

Explanation:

(1)Ceramic materials are in general, harder yet more brittle than metals because of their atomic bonding and crystal structure. Ceramics often have ionic or covalent bonding, which leads to strong bonds between atoms.(2)Nickel is far more ductile than cobalt because of its crystal structure. Nickel has a face-centered cubic (FCC) crystal structure, which allows for the easy movement of dislocations

To learn more about face-centered cubic (FCC) visit: https://brainly.com/question/17111818

#SPJ11

The three components of the cause of delay in the context of architecture and construction projects are as follows:

1. **Design-related delays**: These delays occur due to issues or challenges in the design phase of the project. They can be caused by factors such as incomplete or inaccurate design documentation, design changes or revisions, coordination issues between different design disciplines, or complexities in the design process.

2. **Material-related delays**: Delays can arise from factors associated with materials and supplies required for the project. This can include delays in material procurement, shortages or unavailability of specific materials, quality issues with delivered materials, or logistical challenges in transporting materials to the construction site.

3. **Construction-related delays**: These delays are related to activities during the construction phase. They can stem from factors such as poor project management, insufficient labor or skilled workers, equipment breakdowns, inclement weather conditions, conflicts or disputes on the construction site, or unexpected site conditions that require additional time to address.

These three components collectively contribute to delays in architectural projects. Identifying and mitigating these causes of delay is crucial for successful project management and timely completion.

Learn more about design  documentation here:

https://brainly.com/question/31261963

#SPJ11

Answer:

i) 796.18 N/mm^2

ii) 1111.11 N/mm^2

Explanation:

Initial diameter ( D ) = 12 mm

Gage Length = 50 mm

maximum load ( P ) = 90 KN

Fractures at =  70 KN

minimum diameter at fracture = 10mm

Calculate the engineering stress at Maximum load and the True fracture stress

i) Engineering stress at maximum load = P/ A

= P / [tex]\pi \frac{D^2}{4}[/tex]  = 90 * 10^3 / ( 3.14 * 12^2 ) / 4

= 90,000 / 113.04 = 796.18 N/mm^2

ii) True Fracture stress =  P/A

= 90 * 10^3 / ( 3.24 * 10^2) / 4

= 90000 / 81  =  1111.11 N/mm^2

Opening multiple ports simultaneously can potentially speed up networking operations by allowing multiple streams of data to be transmitted or received in parallel.

When a network connection is established between two devices, a single socket or port is typically used for the communication. This means that all data being transmitted or received must pass through that single socket, which can create a bottleneck if the amount of data is large or if the connection speed is slow.

However, if multiple sockets or ports are used simultaneously, then data can be transmitted or received in parallel, which can increase the overall throughput and speed up the operation.

For example, if a file is being downloaded and multiple ports are used simultaneously, different parts of the file can be downloaded in parallel, rather than waiting for each part to complete before downloading the next.

Learn more about multiple ports here:

brainly.com/question/30456210

#SPJ4

A threat is a person or organization that seeks to obtain or alter data or other IS assets illegally, without the owners' permission.The correct option is A. threat.

A threat is an indication of impending danger or harm that may happen to an information system or organization. In cybersecurity, a threat is any potential danger that may exploit a vulnerability to breach security and do harm to an information system or organization.Examples of cybersecurity threats include ransomware, phishing, distributed denial-of-service (DDoS) attacks, and malware. Hackers and cybercriminals are the most common types of threats, and they usually target financial institutions, healthcare organizations, and government agencies.

Learn more about assets here:

https://brainly.com/question/14826727

#SPJ11

The answer to the question is C. 0°. A source follower amplifier has a phase shift of 0 degrees between the input and output.

In a source follower amplifier, the input is applied to the gate of the FET and the output is taken from the source. A source follower amplifier is often used to match the impedance between two circuits in order to reduce the signal loss that occurs when the output impedance of one circuit is higher than the input impedance of the next circuit. It is a voltage amplifier that has a voltage gain of approximately 1 (unity gain) and is commonly used in applications where high input impedance, low output impedance, and low noise are required.

When it comes to the phase shift between the input and the output, a source follower amplifier has a phase shift of 0 degrees. This is because the input signal is directly applied to the gate of the FET, which acts as a voltage-controlled resistor and provides a low-impedance path to the ground. As a result, the output signal is in phase with the input signal, and there is no phase shift between the input and output. In contrast, a common-source amplifier has a phase shift of 180 degrees between the input and output. This is because the input signal is applied to the gate of the FET, which is a high-impedance node. The output signal is taken from the drain, which is a low-impedance node, and is 180 degrees out of phase with the input signal.

In conclusion, the answer to the question is C. 0°. A source follower amplifier has a phase shift of 0 degrees between the input and output.

know more about source follower amplifier,

https://brainly.com/question/31954365

#SPJ11

Recovery and recrystallization can occur due to factors such as dislocation density reduction, grain growth, phase transformation, and nucleation.

Recovery and recrystallization can occur due to multiple factors, including:

Regarding the effects of annealing temperature on material properties:

Recovery and recrystallization can occur due to factors such as dislocation density reduction, grain growth, phase transformation, and nucleation. Higher annealing temperatures generally lead to increased ductility and decreased strength in materials undergoing recovery and recrystallization processes. However, the elastic modulus and Poisson's ratio are typically not significantly affected by annealing temperatures within the appropriate range.

Learn more about recrystallization visit:

https://brainly.com/question/29215760

#SPJ11

The required correct answer is mViewPager.setCurrentItem(2)

Explanation:ViewPager is an android widget that allows the user to swipe left and right to view pages of content. It is frequently used in apps that have a large number of pages or require frequent navigation. ViewPager can be used in a number of ways, and its use is not limited to displaying images. It can also be used to display text, HTML, or a variety of other content types.There are several ways to set the current item in ViewPager, but the correct way to set the current item for a ViewPager to the third item is to call the method setCurrentItem(2).For example, if mViewPager is the ViewPager instance, mViewPager.setCurrentItem(2) will set the current item of the ViewPager to the third item. The third item corresponds to the index of 2 since ViewPager indexes start at 0.

Learn more about ViewPager here https://brainly.in/question/56172067

#SPJ11

The "lever rule" states that the ratio of the difference between the vapor and total composition (AB) to the difference between the total and liquid compositions (AC) is equal to the ratio of the liquid phase (L) to the vapor phase (V): AB / AC = L / V.

In addition to providing the compositions of the liquid and vapor phases, T-x-y (and H-x-y) diagrams allow us to determine the relative amounts of vapor V and liquid L that compose the total sample at equilibrium. If a binary mixture with total mole fraction z separates into two phases in equilibrium, then the "lever rule" states that the ratio of the difference between the vapor and total composition (the length of AB in the diagram) to the difference between the total and liquid compositions (length AC in the diagram) is equal to the ratio of L to V: AB / AC = L.V, Use a material balance to derive this rule. A material balance is an application of the law of conservation of mass, which states that mass can neither be created nor destroyed.

As a result, the total mass in the reactor should be equal before and after the reaction.The total amount of a mixture in the reactor may be given by Z.The quantity of the component that is present in the liquid phase is L. As a result, V equals the quantity of the component present in the vapor phase. As a result, L+V=Z.Now let's examine the AB in the diagram. The total quantity of the mixture is represented by the distance AC. AB is the length of the vapor segment of AC, and AV is the length of the liquid section of AC. Because the quantity of vapor is V, the quantity of liquid must be L. Therefore, AB/AC = V/Z.Substituting V=Z-L into the previous equation gives AB/AC = (Z-L)/Z.Rewriting it gives AB/AC = 1-L/Z.Dividing both sides by (1-L/Z) gives AB/AC = V/L.Now, we know that AB/AC = V/L, and we may utilize this equation to solve problems involving ternary phase diagrams. As a result, this rule is derived from a material balance.

Learn more about lever rule:

https://brainly.com/question/30195471

#SPJ11

The hash table is attached below. Double hashing can be done using : (hash1(key) + i × hash2(key)) % 7

Here hash1() and hash2() are hash functions  (We repeat by increasing i when a collision occurs)

Algorithm:

check if full

return

check if collision found

use index with the help of Double hashing

else

use index = k % 7

repeat step 1 to 3

A hash function is a mathematical function that takes an input (or "key") and produces a fixed-size string of characters, which is typically a hash value or hash code.

The main purpose of a hash function is to convert the input data into a numerical representation that can be used for various purposes, such as indexing, data retrieval, or security.

Learn more about hash tables, here:

https://brainly.com/question/31596628

#SPJ4

A pump draws water from a reservoir through a 150 mm diameter suction pipe and delivers it to a 75 mm diameter discharging pipe.The end of the suction pipe is 2 m below the free surface of the reservoir.The gauge pressure on the discharge pipe (2 m above the reservoir surface) reads 170 kPa.The average speed in the discharge pipe is 3 m/s.If the pump efficiency is 75 %,the power required to drive the pump is: P = 1495 W

The power required to drive the pump is given by the following equation:

P = ρgQh/η

where:

The volumetric flow rate is given by the following equation:

Q = vA

where:

Therefore, the volumetric flow rate is:

Q = 3 * 0.00442 = 0.01326 m3/s

The total head is given by the following equation:

h = z1 + P1/ρg + v12/2g - z2 - P2/ρg - v22/2g

where:

Therefore, the total head is:

h = 2 + 101.325/(1000 * 9.81) + 02/2 * 9.81 - 2 - 170/(1000 * 9.81) - 32/2 * 9.81 = 10.49 m

Therefore, the power required to drive the pump is:

P = 1000 * 9.81 * 0.01326 * 10.49/0.75 = 1495 W

To learn more about  gauge pressure visit: https://brainly.com/question/30761145

#SPJ11

1. Vc = 87.1 m/min

2. T = (100 / (87.1 x 0.150)) x 1/k

3. Cost per unit = ($30.00 + $4.00 + $15.44) / 200 = $0.24 per unit

4. Vc = 87.1 m/min is the cutting speed for the minimum unit cost.

5. T = (100 / (24.6 x 0.150)) x 1/k

6. Cycle time = 2.29 min

1. The cutting speed for maximum production rate:

In order to find the cutting speed for maximum production rate, we have to use the Taylor equation, which can be represented as:

Vc = C x f^n, where Vc = cutting speed, f = feed, n and C are constants.

The value of n is 0.15 and C is 100 m/min, and the feed is 0.4 mm/rev.

Vc = C x f^n

Vc = 100 x (0.4^0.15)

Vc = 100 x 0.871

Vc = 87.1 m/min

2. The tool life in min of cutting, when using the maximum cutting speed found in (1):

The tool life equation is given as:

T = (C / Vcn) x 1/k, where k = constant. The value of C, Vc, and n are known.

T = (C / Vcn) x 1/k

T = (100 / (87.1 x 0.150)) x 1/k. The value of k is not given. So we cannot calculate the tool life.

3. The cost per unit of product, when using the maximum cutting speed found in (1):

The formula for cost per unit of production is:

Cost per unit = (cost of tooling + labor cost + machine cost) / number of units produced

The cost of tooling includes the cost of each insert, the labor cost includes the burden rate and the labor rate, and the machine cost includes the cycle time, loading time, and indexing time.

Cost of tooling = $30.00

Labor cost = ($22.00/hr + $10.00/hr) x (3 + 8 + 2) / 60 = $4.00

Machine cost = ($22.00/hr + $10.00/hr) x (3 + 8 + 2 + (200 / 24.6)) / 60 = $15.44

Cost per unit = ($30.00 + $4.00 + $15.44) / 200 = $0.24 per unit

4. The cutting speed for minimum unit cost:

The formula for unit cost can be represented as:

Unit cost = (cost of tooling + labor cost + machine cost) / number of units produced

Vc = 87.1 m/min is the cutting speed for the minimum unit cost.

5. The tool life in min of cutting, when using the maximum cutting speed found in (4):

The tool life equation is given as:

T = (C / Vcn) x 1/k, where k = constant. The value of C, Vc, and n are known.

T = (C / Vcn) x 1/k

T = (100 / (24.6 x 0.150)) x 1/k

The value of k is not given. So we cannot calculate the tool life.

6. The cycle time when using the maximum cutting speed found in (4):

The cycle time can be calculated as:

Cycle time = (length of workpiece) / Vc

Cycle time = 200 / 87.1 min

Cycle time = 2.29 min

Therefore, the cutting speed for maximum production rate is 87.1 m/min, the cost per unit of product when using this speed is $0.24 per unit, and the cycle time when using this speed is 2.29 min.

To know more about cycle time, visit the link : https://brainly.com/question/15356513

#SPJ11

The most important lean principle to understand and maximize is **flow**. Flow focuses on optimizing the smooth and continuous movement of work through a system, eliminating waste, bottlenecks, and delays. By prioritizing flow, organizations can achieve faster delivery, reduced lead times, increased productivity, and improved customer satisfaction.

Flow entails visualizing and analyzing the value stream, identifying and addressing constraints, implementing pull-based systems, and fostering collaboration and communication within teams. It emphasizes the steady and efficient progression of work, enabling a steady flow of value from start to finish. While requirements, Gantt charts, and plan-driven approaches have their own significance, flow is fundamental to lean thinking and forms the basis for other lean principles such as pull systems, one-piece flow, and continuous improvement. By optimizing flow, organizations can enhance overall performance and responsiveness while minimizing waste and inefficiencies.

Learn more about Gantt charts here:

https://brainly.com/question/31600275

#SPJ11

(a) The program will run 54 times before the final misprediction of the conditional jump. Thus, the total misprediction penalty will be (54-1)*3 = 159

(b) The program will run 1 time before the first misprediction of the conditional jump. Thus, the total misprediction penalty will be 53*3 = 159

(c) The program will run 1 time before the first misprediction of the conditional jump. Thus, the total misprediction penalty will be 53*3 = 159.

Consider the following E20 assembly language program which will find the largest number in an array. We need to determine the total misprediction penalty accrued in the above program, if it is run on a processor that always predicts branch taken, if it is run on a processor that always predicts branch not taken, and if it is run on a processor that uses dynamic prediction based on the previous resolution.

(a) If the above program is run on a processor that always predicts branch taken, then the program will face a misprediction penalty for every conditional jump instruction. The program consists of one conditional jump instruction i.e. jeq $2, $0, done and the branch will not be taken when the value of $2 is not equal to 0. The program will run 54 times before the final misprediction of the conditional jump. Thus, the total misprediction penalty will be (54-1)*3 = 159.

(b) If the above program is run on a processor that always predicts branch not taken, then the program will face a misprediction penalty every time the conditional jump is executed and the branch is taken. The program consists of one conditional jump instruction i.e. jeq $2, $0, done. If the value of $2 is equal to 0, the branch will be taken. The program will run 1 time before the first misprediction of the conditional jump. Thus, the total misprediction penalty will be 53*3 = 159.

(c) If the above program is run on a processor that uses dynamic prediction based on the previous resolution, then the program will face misprediction penalty when the processor incorrectly predicts the outcome of a conditional branch. If there was no previous execution of the conditional jump, predict that the branch will not be taken. The program consists of one conditional jump instruction i.e. jeq $2, $0, done. If the value of $2 is equal to 0, the branch will be taken. The program will run 1 time before the first misprediction of the conditional jump. Thus, the total misprediction penalty will be 53*3 = 159.

To know more about assembly language, visit the link : https://brainly.com/question/30299633

#SPJ11