The ogg audio format cannot be played in Safari. Ogg audio is supported by Microsoft Edge, Opera, and Chrome.
Does every browser support Ogg?Chrome versions 4-106, None, and below 4 do not support Ogg Vorbis audio format, while Chrome versions 4-106 and None partially support it. None of the versions, 14.1–16, and 3.2–14 of Safari completely support Ogg Vorbis audio format, while the latter is not supported at all.
Support for Ogg is EDGE?Microsoft Edge 91 offers complete support for the Ogg Vorbis audio format. Simply told, a user browsing your page with the Microsoft Edge 91 browser would enjoy a flawless viewing experience if your website or web page uses the Ogg Vorbis audio format.
To know more about ogg audio format visit :-
https://brainly.com/question/14197402
#SPJ1
queston:-
Which of the following browsers does not support the Ogg audio format? Group of answer choices
a. Chrome
b. Microsoft Edge
c. Opera
d. Safari.
Computer using fully associative cache has 2^16 bytes of byte-addressable main memory and a cache of 64 blocks, where each cache block contains 32 bytes.
a) How many blocks of main memory are there?
b) What is the format of a memory address as seen by the cache, that is, what are the sizes of the tag and offset fields?
c) To which cache block will the memory address F8C9 (subscript) 16 map?
a) Main memory has 2^11 blocks. b) the sizes of the tag and offset fields are 19. c) It can map everywhere because it is an associative cache.
A computer's primary memory is another name for its main memory. The RAM is sometimes referred to as random access memory. All of the data in RAM is deleted when the machine is turned off. Primary memory is computer storage that the CPU can access directly. Primary memory is often referred to as internal memory or main memory. Additional names for secondary memory are external memory and auxiliary memory. Examples include registers, RAM, ROM, cache memory, PROM, and EPROM. Examples include magnetic tapes, hard drives, and floppy discs. Auxiliary memory is used for long-term storage whereas main memory is used to keep data and instructions when a program is being executed.
Learn more about Main memory here
https://brainly.com/question/22099150
#SPJ4
question 8 fill in the blank: you should distinguish elements of your data visualization by the foreground and background and using contrasting colors and shapes. this makes the content more accessible.
You should distinguish elements of your data visualization by separating the foreground and background and using contrasting colors and shapes.
What is meant by data visualization?
The graphic depiction of data and information is known as data visualization. Data visualization tools offer an easy approach to observing and comprehending trends, outliers, and patterns in data by employing visual elements like charts, graphs, and maps. Exploration, monitoring, and explanation are the three basic purposes of data visualization. Although some visualizations may cover more than one of these, the majority concentrate on a single objective. In order to make data easier for the human brain to grasp and draw conclusions from, data visualization is the process of putting information into a visual context, like a map or graph. The basic objective of data visualization is to make it simpler to spot trends, patterns, and outliers in big data sets.The complete question is;
Fill in the blank: You should distinguish elements of your data visualization by _____ the foreground and background and using contrasting colors and shapes. This makes the content more accessible.
To learn more about data visualization refer to:
https://brainly.com/question/29662582
#SPJ4
Both wired and wireless analog signals are particularly susceptible to noise and attenuation and other forms of distortion in a channel because the distortion created cannot bedetected and reversed.
The statement is true : Both wired and wireless analog signals are particularly susceptible to noise and attenuation and other forms of distortion in a channel because the distortion created cannot be detected and reversed.
An analog signal has a restricted number of possible values within a continuous range that is time-varying and typically limited to a certain range (for example, +12V to -12V). An analog signal, such as electricity flowing over a wire, exploits a specific property of the medium to transmit the signal's information. To represent the information in an electrical signal, the signal's voltage, current, or frequency may be changed. In reaction to changes in light, sound, temperature, position, pressure, or other physical phenomena, analog signals are frequently calculated responses.
Communication systems that employ a continuous signal to transmit voice, data, image, signal, or video information frequently use analog signals. Analog transmission can be divided into two categories that are both based on how data is adjusted to combine an input signal with a carrier signal. Amplitude modulation and frequency modulation are the two methods. Amplitude modulation (AM) modifies the carrier signal's amplitude. FM (frequency modulation) modifies the carrier signal's frequency. There are several ways to produce analog transmission:
through a coaxial or twisted pair cablethrough a fiber optic wireusing radioacross waterTo know more about analog signals:
https://brainly.com/question/28970758
#SPJ4
What does the Overview tab provide a quick view of in Resource Monitor? Select all that apply. A. CPU B. Memory C. Network D. Disk.
Quick access to Resource Monitor's memory is provided by the Overview tab. Any type of user will find Resource Monitor to be a useful tool. No matter if you work in system administration.
You can easily comprehend how this resource monitoring tool functions, whether you are a seasoned user or a novice. It provides more details than the Windows Task Manager and even equips you with capabilities to go more deeply into your device's operations. As seen in Figure A, choose the Memory tab from the Resource Monitor user interface. The Memory tab provides in-depth details about how much memory Windows 10 is using. Three graphs—Used Physical Memory, Commit Charge, and Hard Faults/Sec—can be found on the right side of Resource Monitor's Memory tab.
Learn more about Resource Monitor here
https://brainly.com/question/13087639
#SPJ4
A pair of number cubes is used in a game of chance. Each number cube has six sides, numbered from 1 to 6, inclusive, and there is an equal probability for each of the numbers to appear on the top side (indicating the cube's value) when the number cube is rolled. The following incomplete statement appears in a program that computes the sum of the values produced by rolling two number cubes.int sum = / missing code / ;Which of the following replacements for / missing code / would best simulate the value produced as a result of rolling two number cubes?A 2 (int) (Math.random() 6)B 2 (int) (Math.random() 7)C (int) (Math.random() 6) + (int) (Math.random() 6)D (int) (Math.random() * 13)E 2 + (int) (Math.random() 6) + (int) (Math.random() 6)
It would be better to simulate the value obtained by rolling two number cubes using E 2 + (int) (Math.random() 6) + (int) (Math.random() 6).
Which of the following best sums up the actions taken by the method arrayMethod () on the array Nums?Because it tries to access a character at index 7 in a string whose last element is at index 6, the method call, which was effective prior to the change, will now result in a run-time error.
What results will be produced by the C compiler?It produces assembler source code using the source code and the output of the preprocessor. Third in the compilation process is assembly. An assembly listing with offsets is generated using the assembly source code. An object file contains the output from the assembler.
To know more about Math random visit :-
https://brainly.com/question/17586272
#SPJ4
an information system is a collection of people, procedures, software, hardware, data, and connectivity. t/f
True. An information system is a combination of hardware, software, data, and people that work together to collect, store, process, and communicate information.
The hardware component includes the physical components of the system such as computers, networking equipment, and other technology. The software component includes the software applications used to store, process, and communicate information.
The people component includes the users of the system, such as administrators, users, and developers. The data component includes the information stored in the system, such as databases, documents, and other files. Finally, the connectivity component includes the physical connections between the components of the system, such as the internet, cables, and routers.
For more questions like Information system click the link below:
https://brainly.com/question/14520413
#SPJ4
The Monte Carlo method was first developed during____to test _____.
Answer:
World War II
decision making
Consider the following network. ISP B provides national backbone service to regional ISP A. ISP C provides national backbone service to regional ISP D. Each ISP consists of one AS. B and C peer with each other in two places using BGP. Consider traffic going from A to D. B would prefer to hand that traffic over to C on the West Coast (so that C would have to absorb the cost of carrying the traffic cross-country), while C would prefer to get the traffic via its East Coast peering point with B (so that B would have carried the traffic across the country). What BGP mechanism might C use, so that B would hand over A-to-D traffic at its East Coast peering point? To answer this question, you will need to dig into the BGP specification.
The BGP mechanism that ISP C used so that B would hand over A-to-D traffic at its East Coast peering point.
Broder Gateway Protocol:
Boder Gateway Protocol is a gateway protocol used to exchange routing and reach ability information among various autonomous systems (AS) on the internet
The most crucial component of BGP is the flow specification, which instructs the AS'S where to send traffic from one AS to another on the network.
BGP mechanism used by C:
B is compelled to pass over all traffic to D at its East Coast peeling point by ISP C's BGP mechanism, which ISP C employs to force B to send over A-to0 traffic to C.
By using its east coast peeking point with C, C should use the east coast to announce its route to D.
ISP B believes that it is the only flow specification that needs to be followed in order to reach ISP D once ISP C broadcast its east coast peering point to B.
Learn more about BGP mechanism here:
https://brainly.com/question/29455314
#SPJ4
in this chapter, the class datetype was designed to implement the date in a program, but the member function setdate and the constructor do not check whether the date is valid before storing the date in the member variables. rewrite the definitions of the function setdate and the constructor so that the values for the month, day, and year are checked before storing the date into the member variables. add a member function, isleapyear, to check whether a year is a leap year. moreover, write a test program to test your class.
To rewrite the definitions of the function setDate and the constructor so that the values for the month, day, and year are checked before storing the date into the member variables.
What is a constructor?Constructors are not explicitly called and are only used once during their lifetime. When there is a hierarchy of classes and a derived class inherits from a parent class, the execution sequence of the constructor is a call to the constructor of the parent class first, followed by the constructor of the derived class. Constructors cannot be inherited.
Users are not required to create constructors for every class. Any of the access modifiers can be used to declare a constructor. A constructor with the appropriate access modifier is required.
#include <iostream>
#include "dateType.h"
using namespace std;
//fixed some syntax issues related to brackets
void dateType::setDate(int month, int day, int year)
{
int noDays;
if(year<=2008)
{
dYear=year;
if(month<=12)
{
dMonth=month;
switch(month)
{
case 1:
case 3:
case 5:
case 7:
case 8:
case 10:
case 12: noDays=31;
break;
case 4:
case 6:
case 9:
case 11: noDays=30; //changed this to 30
break;
case 2: if(isLeapYear(year))
noDays=29;
else
noDays=28;
}
if(day<=noDays)
{
dDay=day;
}
else
{
cout<<"Invalid Day"<<endl;
dDay=0;
}
}
else
{
cout<<"Invalid Month"<<endl;
dMonth=0;
}
}
else
{
cout<<"Invalid Year"<<endl;
dYear=0;
}
}
//added logic for leap year
bool dateType::isLeapYear(int year)
{
if((year % 400) == 0 || year%4==0)
return true;
else
return false;
}
void dateType::printDate()const
{
cout<<"Date #: "<<dMonth<<"-"<<dDay<<"-"<<dYear;
}
int dateType::getMonth()const
{
return dMonth;
}
int dateType::getDay()const
{
return dDay;
}
int dateType::getYear()const
{
return dYear;
}
//calling setdate method here to accomplish validations
dateType::dateType(int month, int day, int year)
{
setDate(month, day, year);
}
int main()
{
int m,d,y;
dateType date(0,0,0);
cout<<"Enter Month: ";
cin>>m;
cout<<"Enter day: ";
cin>>d;
cout<<"Enter Year: ";
cin>>y;
date.setDate(m,d,y);
bool check =date.isLeapYear(y);
date.printDate();
if(check)
cout<<" which is a leap Year";
else
cout<<" which is not a leap year";
}
Learn more about constructor
https://brainly.com/question/13267121
#SPJ4
an access object that provides you with a way to enter, edit, and display data from underlying tables.
an access object that provides you with a way to enter, edit, and display data from underlying table is form.
An Access database can be updated in a number of different ways. When you have a new item to track, like a new contact in the Contacts table, you add a record to your database. At the point when you add another record, Access affixss the record to the furthest limit of the table. In order to remain current, you also update fields, such as adding a new address or last name. To keep up with information trustworthiness, the fields in an Entrance data set will be set to acknowledge a particular kind of information, like text or numbers. Access will display an error message if you do not enter the correct data type. Finally, you can delete a record to free up space and when it no longer serves a purpose. You manually update the data by using a form. Forms for data entry can make entering data faster, easier, and more accurate. Lists, text boxes, and buttons are examples of controls that can be included in a form. Thusly, every one of the controls on the structure either peruses information from or composes information to a hidden table field. Datasheets are data grids that look like worksheets in Excel. By working directly in Datasheet view, you can modify the data. Assuming you are know about Succeed, datasheets ought to be generally straightforward. You can change information in tables, question result sets, and structures that show datasheets. Datasheets are typically used when multiple records need to be viewed simultaneously.
To know more about database visit https://brainly.com/question/29412324?referrer=searchResults
#SPJ4
as long as two transactions, t1 and t2, access data, there is no conflict, and the order of execution is irrelevant to the final outcome.
There is no conflict as long as two transactions, T1 and T2, access unrelated data, and the order of execution is unimportant.
What is a Transaction?
Transactions are a set of operations used to perform a set of logical tasks. A transaction typically indicates that the data in the database has changed. One of the primary applications of DBMS is to protect user data from system failures.
ACID Properties:
A transaction is a very small program unit that may contain several low-level tasks. A transaction in a database system must maintain Atomicity, Consistency, Isolation, and Durability, also known as ACID properties, in order to ensure accuracy, completeness, and data integrity.
To learn more about ACID Properties, visit: https://brainly.com/question/29580043
#SPJ4
write two nested for loops to calculate the following double summation: ex: if s is 3 and t is 2, then summationresult is 18. (1 x 1) (1 x 2) (2 x 1) (2 x 2) (3 x 1) (3 x 2)
Double sum is just the sum of two sums. Use double sums if the items of the sum have two indices and you wish to add each index separately.
One sum can be created by combining two sums whose indices of summation and summands perfectly line up. We must then specify how each component of the summing expression changes as a result of that change in variables. beginning index. n = 0 is equivalent to k = 1.
summationResult=DoubleSum in the function (s,t)
summationResult=0;
first summation limit (i= 1 to s) for i=1:
Limit on summing for j=1:t%seconds (j= 1 to t)
summationResult = (i*j) + summationResult;
end
end
end
Learn more about index here-
https://brainly.com/question/13715769
#SPJ4
FindMaxNumber
Create a new program called FindMaxNumber.
Create an array of integers of size 10. Populate it with random numbers between 1-100. Pass array to your maximum method.
Create a method called maximum that passes an array of integers as a parameter and returns the maximum value in the array. For example, if the array passed stores {12, 7, -1, 25, 3, 9}, your method should return 25. Your method should not modify the elements of the array.
Print maximum number once returned to main method.
Also, use a for each enhanced loop to print all the array elements.
The python code to depict the program is:
import random
# Function which returns the maximum number
def FindMaxNumber(array):
mx=0
# iterate array and update element with the mx
for num in array:
mx=max(mx,num)
# return mx
return mx
# main method to gnerate 10 integers in between ranges
def main():
# array of size 10
array=[0]*10
# Iterate 10 times and generate number
for i in range(10):
# generate random integer
num=random.randint(1,100)
# append into array
array[i]=num
# print array
print("\nGenerate Array: "+str(array))
# get maximum nummber
maxNum=FindMaxNumber(array)
# print maximum number
print("Max Num: "+str(maxNum))
main()
What is a python?Python is a popular computer programming language used to create software and websites, automate processes, and analyze data. Since Python is a general-purpose language, it can be used to create a wide range of programs and isn't tailored for any particular issues.
In this case, we've created a program called FindMaxNumber and created an array of integers of size 10. .
Learn more about python on:
https://brainly.com/question/26497128
#SPJ1
during the runtime (rt) stage of the uefi boot process, system control passes to ntoskrnl.exe. which of the following tasks does ntoskrnl.exe perform? (select three.)
A, B, and C are the proper answers. System control is transferred to ntoskrnl.exe during the runtime (rt) phase of the uefi boot procedure. All platform restart events will be handled.
The boot procedure can also load a storage dump application for operating system fault diagnosis in addition to loading an operating system or standalone utility. When a computer is turned on, a start-up process called boot procedure launches the operating system. A control system is a device that modifies an output in order to produce the intended response. A control system's basic block diagram is depicted in the following figure. The control system is depicted in this case by a solitary block. The control system earned its name because the output is managed by changing input.
Learn more about boot procedure here
https://brainly.com/question/26978646
#SPJ4
The complete question is-
during the runtime (rt) stage of the uefi boot process, system control passes to ntoskrnl.exe. which of the following tasks does ntoskrnl.exe perform? (select three.)
a. Handling all platform restart events
b. Creating a temporary memory store
c. Passing handoff information to the PEI Foundation
d. Handling all platform power off the events
in this exercise, we will be looking at our example code for selection sort. however, while we are sorting we will also count the number of swaps taking place, then print them out once the array has been sorted. add a print statement at the end of the selectionsort method that prints out the number of swaps that took place during the sort. you should not modify the main() method. hint: where are items compared? try writing out the steps in the algorithm on paper to help.
In order for selection sort to function, the smallest element in an unsorted array must be moved to the front. From left to right, you'll travel through each object in search of the smallest one.
The array is now sorted for the first item, leaving the remaining items unsorted. Consider the array below as an illustration. The selection sort algorithm is a straightforward but efficient sorting method. An in-place comparison-based technique known as a selection-based sorting algorithm separates the list into two halves, the sorted part on the left and the unsorted part on the right. The unsorted portion initially contains the complete list, while the sorted section is initially empty. A tiny list can be sorted using selection sort.
The cost of switching is unimportant in the selection sort, and each element must be examined. As in flash memory, the cost of writing to memory is important in selection sort (the number of writes/swaps is O(n) as compared to O(n2) in bubble sort).
Know more about array here:
https://brainly.com/question/13107940
#SPJ4
As depicted a packet with the header 0111 arrives at the first router. What answers below describes what will transpire in the router:
a. The router will request a forwarding table from other routers on the network before processing the packet.
b. The router will forward the packet out interface 2.
c. The router will forward the packet out interface 1.
d. The router will route the packet out interface 2
The transpire in the router is the router will request a forwarding table from other routers on the network before processing the packet.
What is meant by routers on the network?An actual or virtual device known as a router is used to transmit data between two or more packet-switched computer networks. A router looks at the destination's Internet Protocol (IP) address and chooses the best route for the data packet to take in order to get there.
They include VPN routers, core routers, edge routers, wireless routers, and wired routers.
To distribute a single internet connection among numerous devices, a router is required. Most Internet service providers only assign the first device connected to their modem or ONT with one IP address. Without that address, you cannot transmit or receive data over the internet; think of it as your internet mailing address.
To learn more about router refer to :
https://brainly.com/question/24812743
#SPJ4
the procedure below is intended to display the index in a list of unique names (namelist) where a particular name (targetname) is found. if targetname is not found in namelist, the code should display 0. a 17-line code for a procedure reads as follows. line 1: procedure find name, open parenthesis, name list comma target name, close parenthesis. line 2: open brace. line 3: index, leftward arrow, 0. line 4: for each name in name list. line 5: open brace. line 6: index, leftward arrow, index plus 1. line 7: if, open parenthesis, name equals target name, close parenthesis. line 8: open brace. line 9: found index, leftward arrow, index. line 10: close brace. line 11: else. line 12: open brace. line 13: found index, leftward arrow, 0. line 14: close brace. line 15: close brace. line 16: display, open parenthesis, found index, end parenthesis. line 17: close brace. which of the following procedure calls can be used to demonstrate that the procedure does not work as intended?
The procedure does not work as intended is FindName (["Andrea", "Ben", "Chris"], "Ben")
What is a Procedure ?A procedure in computer programming is a standalone piece of code that does a specific purpose and is referred to inside a larger body of source code. This type of code component is also known as a function or sub-routine.
A set of coding instructions is referred to as a method. Depending on the programming language, they may also be referred to as methods or functions. Without having to recreate the same set of instructions into your code, you may reuse them repeatedly by using a process.
When a procedure is called in a program, the computer searches for the procedure by name, finds the statements therein, and executes those statements. Even though it appears to us that there is less code, the machine is still doing all the effort of executing those statements.
To learn more about Codeing Procedure refer to :
https://brainly.com/question/28031691
#SPJ4
you have recently purchased a toll pass for a bridge that you cross each day on your way to work.which of the following wireless technologies is most likely being used for this pass?
On some roadways, including highways, interstate expressways, turnpikes, tunnels, and bridges, a toll, often known as a toll-tax, is levied.
The highways on which this toll tax is imposed are referred to as toll roads, toll bridges/tunnels, or tollways. The toll tax is frequently referred to as the NH fee (National Highway fee). The toll tax is levied against users of certain particular toll highways in order to fund road infrastructure. To cover the costs of building and maintaining roads, there are both toll fees and road taxes. The type of roadways that the federal/state governments manage and spend these taxes on makes a difference. Unlike toll charges, road taxes are imposed by the state.
Learn more about users here-
https://brainly.com/question/24297734
#SPJ4
Write a function called morseCode that encodes an English phrase into Morse code. The function should also convert a Morse code phrase into English. Use one blank between each Morse-coded letter and three blanks between each Morse-coded word. Pass the function the input string that needs to be encoded or decoded, and a flag that is set to to encode into Morse-code and is set to 1 to decode into English. Use pointers for all strings.
Morse code is a way of communicating text data that may be directly comprehended by an experienced listener or observer without the need for additional tools. It consists of a series of on-off tones, lights, or clicks.
It bears the name Samuel F. B. Morse, who created the telegraph. The algorithm is quite basic. Every letter of the English alphabet is replaced by a succession of dots and dashes, or occasionally just a single dot or dash, and vice versa. Each string of text is transformed into a series of dots and dashes. Each character is transformed to its corresponding Morse code for this and added to the encoded message. The space is exactly reproduced in this place. We have thought about both alphabets and numbers.
Learn more about string here-
https://brainly.com/question/27832355
#SPJ4
a method named fillup that accepts no parameters. fillup increases amount to capacity and reurns the idfference between teh value of capacity and the original value of amount]
GasTank public class, / Initialization of instance variables, private double sum equals zero; defining the variable capacitance instance, private, two-person capacity; /constructor with a double-type parameter.
{potential = I} / The addGas method increases the gas supply.
void public addGas (double i)
The additional gas is added to the existing gas supply. Amount is set to capacity if it exceeds the maximum amount.
if(amount > capacity); amount += I capacity = amount; or is it amount + capacity? capacity+i: amount;/
/useGas method with double-typed parameters
invalid public useGas (double i)
/If the result is less than 0, the parameter is subtracted from 0 and left at 0.
amount = amount - I amount = amount = 0;
isEmpty is a technique.
isEmpty public boolean ()
/Returns true if volume is less than 0.1, otherwise it returns false.
0.1 as a return amount false: true;
method isFull in /
isFull public boolean ()
/returns true if the amount value is more than 0.1 and returns false otherwise.
(Capacity-0.1) return amount >? false: true;
/method getGasLeve
double public get GasLevel()
/Returns the amount instance variable's value.
a refund amount;
method fillUp in /
double public fillUp ()
/gives back the difference between the quantity and the capacity
Double blah is equal to capacity - amount, and amount is equal to capacity.}
Know more about parameter here:
https://brainly.com/question/28258470
#SPJ4
You are working with the penguins dataset. You want to use the summarize() and mean() functions to find the mean value for the variable body_mass_g. You write the following code: penguins > drop_na () 8> group_by (species) %>8 Add the code chunk that lets you find the mean value for the variable body_mass_g. 1 1 Run Reset What is the mean body mass in g for the Adelie species? 5092.437 3706.164 4207.433 3733.088
group by(island, year) penguins
body mass g, na.rm = TRUE, mean(mean body mass g = mean(body mass g, TRUE))
library(palmerpenguins)
data.frame df (penguins)
Complete.cases(df), df - # Remove NA rows
mean(df[df$species=="Adelie",6])\smean(df[df$species=="Chinstrap",6])\smean(df[df$species=="Gentoo",6])\smean(df[,6])
Penguin dataset: What is it?It is a dataset made up of measurements taken from three different species of penguins: Adelie, Gentoo, and Chinstrap. similar to Iris data, which included measurements for three distinct Iris flower species. For what they are constructed of, both are excellent.
What classification method will be applied to the penguin dataset?Using the well-known Palmer Penguins dataset, this research examines the supervised learning classification techniques LDA (Linear Discriminant Analysis), QDA (Quadratic Discriminant Analysis), NB (Naive Bayes), and KNN (K-Nearest Neighbors).
To know more about penguins visit:-
https://brainly.com/question/9056279
#SPJ1
Wendy had been searching the internet for a great deal on jewelry. While looking at one site, a pop-up was displayed that told her she had just been chosen as the winner of a nice prize. Being excited to win, Wendy clicked on the link provided to claim her prize. The next day, when Wendy tried to turn on her computer, her computer displayed the Blue Screen of Death (BSOD).
After interviewing Wendy, you suspect that the pop-up she clicked on installed some malicious software that has caused her computer to lock up.
Which of the following is the BEST place to begin repairing Wendy's computer?
Boot the computer from the Windows installation disc and run Startup Repair.
Although BSOD can be caused by many things, given the circumstances and your suspicion that malware may be the cause, you should first isolate Wendy's computer and then try to make her computer bootable by running Startup Repair. Startup Repair attempts to fix problems that keep Windows from loading. If this process fixes her computer, you would then take the proper steps to find and remove the malicious software that caused the issue in the first place.
If the computer does not boot after completing the above, you can try to run a System Restore. This would recover your computer to a previous point, but all of the changes made after the restore point was created would be lost.
If the restore process fails, you could then try to Reset the PC. Keep in mind that this step may get the computer running again, but it will remove all of the applications and settings. If this step does work, you must still check for malicious software that may be disguised as a personal file.
If all else fails, a clean installation of Windows can be performed. And if a backup of Wendy's files are available, they can be restored.
For Wendy to repair the computer, she should continuously hold down the shift key for the Advanced Recovery Options menu to appear. For troubleshooting, she will then click reset the PC. Then select if she can perform a clean install and remove all things or keep the files. Therefore, the correct option is "Boot the computer from the Windows installation disc and run Startup."
Windows Installation and the Run Startup
Select Settings>Update and Security>Recovery from the PC's menu. The page title will be "Reset this PC." Next, click the Get Started option and select keeping files or removing everything.
When using Windows 10, the setting window will be launched by clicking the Start menu, then selecting a gear icon in the low left corner. The other choice from the apps list is the Settings app. Then later, click Update and Security> Recovery in Settings, and decide to Get started under rebooting the PC.
Therefore, booting the computer from the installation disc of the window and running the option of resetting the PC is the best answer.
To learn more about windows installation, follow the link below: brainly.com/question/24282472
#SPJ4
You have decided to conduct a business meeting at a local coffee shop. The coffee shop you chose has a wireless hotspot for customers who want internet access.
You decide to check your email before the meeting begins. When you open the browser, you cannot gain internet access. Other customers are using the internet without problems. You are sure your laptops wireless adapter works because you use a wireless connection at work.
What is the likely cause of the problem?
- PPP is not configured correctly.
- A mismatched SSID.
- Different LAN protocols are being used.
- Antenna strength on the WAP is too low.
- WAP is out of range.
The cause of the problem of unable to get internet access on the wireless hotspot is a mismatched SSID.
What is SSID?SSID or service set identifier is the unique name that contains sequence of characters in wireless LAN, it also be called as network name. The SSID it to determine the device to be connected to which network when in the same area there are several available network.
In the case, we know the problem is neither on network or on the device. So, the problem in when connecting the device to the LAN, and this can happen if the SSID is mismatched.
Learn more about SSID here:
brainly.com/question/27975067
#SPJ4
if you delete a photo that's also in a shared album, will it remove it from shared album photos iphone
The photos and videos that subscribers to a shared album add can only be deleted. A photo or video that you delete from a shared album that you own also disappears from the shared album on all of your devices and the devices of all subscribers.
They can be saved in a shared album and removed from the phone, yes. To reduce the amount of space my phone holds for photos, I always do this. iCloud houses shared albums. Before deleting the photos from your phone, just make sure that when you add them to a shared album, you check the album to see if they are still there. I assume you are aware of the distinction between shared albums and albums. Albums actually exist on your phone and are merely logical collections of your videos and photos. They actually do not occupy additional space. So in the event that you erase a photograph from a collection, that erases it from the telephone. Fortunately, you won't have to worry about losing them if you accidentally delete them from the Recently Deleted album.
To know more about iCloud visit https://brainly.com/question/20347108?referrer=searchResults
#SPJ4
Which of the following correctly declare an array that can hold up to 3 rows of 5 columns of doubles?
a. float array[3][5];
b. int array[3],[5];
c. float array[3,5];
d. int array[3][5]
Answer:
B
Explanation:
cause int is an integer
You connect your computer to a wireless network available at the cola library. You find that you can't access several websites you need to on the internet.
Which of the following is the MOST likely cause of this problem?
A proxy server is filtering access to websites
The MOST likely source of this issue is a proxy server that filters website access.
A device or router known as a proxy server acts as a conduit between users and the internet. Thus, it aids in preventing online intruders from accessing a private network. It is a server that is referred to as a "intermediary" since it stands between end users and the websites they visit online.
An IP address is used by computers to connect to the internet. Similar to your home's street address, this instructs incoming data where to go and marks outgoing data with a return address so that other devices can authenticate it. A proxy server is just a machine connected to the internet with its own IP address.
Learn more about Proxy server here:
https://brainly.com/question/14403686
#SPJ4
which of the following is not a recognized theory of copyright infringement? group of answer choices equivalence vicarious infringement direct infringement indirect infringement
Equivalence is not a recognized theory of copyright infringement.
What is copyright infringement?In general, copyright infringement happens when a work protected by a copyright is reproduced, distributed, performed, publicly exhibited, or transformed into a derivative work without the owner's consent.Copyright protection must meet three fundamental criteria: it must be an original work of authorship, fixed in a physical medium of expression, and be a work of authorship.The two most prevalent forms of copyright infringement plagiarism are image and text. No matter if they are used in academic papers, song lyrics, or stock pictures, utilising them without the owner's consent typically constitutes copyright infringement.Unauthorized downloading or uploading of a work protected by copyright is illegal. Criminal sanctions for willful copyright infringement include up to a five-year jail sentence and fines of up to $250,000. Civil judgements may also be obtained for violations of copyright.Learn more about copyright infringement refer to :
https://brainly.com/question/14855154
#SPJ1
Please use the accompanying Excel data set or accompanying Text file data set when completing the following exercise.
The depth of a keyway is an important part quality characteristic. Samples of size n = 5 are taken every four hours from the process and 20 samples are summarized as follows:
A keyway is used in driven systems to increase torque capacity and stop parts from slipping on a shaft. The holding power of the screws is what determines torque when stiff couplings without a keyway are employed.
A keyway is a grove or slot into which a key can be inserted. A keyway is a lengthy slot carved out of a component to receive a key that interacts with a corresponding slot on a mating component to prevent movement of the two components. Stainless steel or medium carbon steel are typically used to make shaft keys. To fit various application settings, they may be constructed from a wide variety of materials, including bronze, copper, brass, and aluminum alloy. By machining grooves into the key blade to produce a final shape, keyways are created. (Watch: Key Milling Tool Video).
To learn more about keyway click the link below:
brainly.com/question/26874242
#SPJ4
what is the console output of the following python script? assume the user inputs the following string: 0 1 3 57 9. user input = input('enter numbers:') tokens = user input.split() # split into separate strings nums = [] for token in tokens: nums.append(int(token)) max num = none for num in nums: if (max num == none) and (num % 2 == 0): max num = num elif (max num != none) and (num > max num ) and (num % 2 == 0): max num = num print('max #:', max num) group of answer choices 1
The built-in print() function in Python displays any string that is sent to it. Use the console.log() method in JavaScript to print to the console.
The JavaScript console log function is mostly used for debugging code and writes the output to the console. To open the browser console, right-click the page, select Inspect, and then click Console.
Python application demonstrating how to separate several inputs
# taking two inputs at a time
x, y = input("Enter two values: ").split()
print("Number of boys: ", x)
print("Number of girls: ", y)
print()
# taking three inputs at a time
x, y, z = input("Enter three values: ").split()
print("Total number of students: ", x)
print("Number of boys is : ", y)
print("Number of girls is : ", z)
print()
# taking two inputs at a time
a, b = input("Enter two values: ").split()
print("First number is {} and second number is {}".format(a, b))
print()
# taking multiple inputs at a time
# and type casting using list() function
x = list(map(int, input("Enter multiple values: ").split()))
print("List of students: ", x)
Learn more about program here-
https://brainly.com/question/23777683
#SPJ4
FILL IN THE BLANK. After determining the overall direction of the systems development, ________ is one tool that helps evaluate alternative system projects.
A. business rationalization
B. score modeling
C. portfolio analysis
D. cloud resources procurement
E. change forecasting
After determining the overall direction of the systems development, portfolio analysis is one tool that helps evaluate alternative system.
Analyzing a portfolio involves looking at the elements that make up a variety of goods with the aim of selecting choices that should increase total return. The phrase refers to the procedure that enables a management to identify better methods to distribute resources in order to boost earnings. It could also apply to a portfolio of investments made up of securities.
To know more about system development click on the below link:
https://brainly.com/question/15696694
#SPJ4