The object that will most likely absorb sound would be a blanket. That is option C
What is a sound energy?A sound energy is the type of energy that travels through vibrations in air and can be heard through human ears or detected using specialised equipments.
The properties of sound energy include the following:
Pitch, Dynamics (loudness or softness),Timbre (tone color), and Duration.Blankets are less solid in nature than rocks,wall and floors in which sound waves can easily bound off from.
Learn more about energy here:
https://brainly.com/question/25959744
#SPJ1
Question 19 Marks: 1 One piece of refuse-compaction and earth-moving equipment is needed at the landfill site for approximately eachChoose one answer. a. 40 loads per day b. 60 loads per day c. 80 loads per day d. 100 loads per day
One piece of refuse-compaction and earth-moving equipment is needed at the landfill site for approximately each 80 loads per day. So the correct answer is c.
This means that based on the specific conditions or requirements of the landfill site in question, it is estimated that one piece of refuse-compaction and earth-moving equipment would be needed to handle approximately 80 loads of refuse per day. This information may be based on factors such as the volume of waste generated, the efficiency of the equipment, the capacity of the landfill site, and other operational considerations.
It's important to note that the actual number of loads per day that would require equipment may vary depending on various factors and site-specific conditions. The given answer is an estimate and may not be universally applicable to all landfill sites or situations.
To know more about landfill ,
https://brainly.com/question/16924501
#SPJ11
how fast in seconds can the 149 a current through a 0.350 h inductor be shut off if the induced emf cannot exceed 74.0 v?
The 149 A current through the 0.350 H inductor can be shut off in about 0.704 seconds without exceeding the induced emf limit of 74.0 V.
We can use the formula:
ε = -L (dI/dt)
where ε is the induced emf, L is the inductance, and dI/dt is the rate of change of current. The negative sign indicates that the induced emf opposes the change in current.
We want to find the maximum rate at which the current can be shut off without exceeding the induced emf limit of 74.0 V.
Rearranging the formula and solving for dI/dt, we get:
dI/dt = -ε / L
Substituting the given values, we get:
dI/dt = -74.0 V / 0.350 H = -211.4 A/s
This means that the current through the inductor can be decreased at a maximum rate of 211.4 A/s without exceeding the induced emf limit of 74.0 V.
To find the time it takes to shut off the current completely, we can use the formula:
t = ΔI / (dI/dt)
where ΔI is the change in current. In this case, ΔI = 149 A (the initial current) - 0 A (the final current) = 149 A. Substituting the values, we get:
t = 149 A / 211.4 A/s = 0.704 s
Therefore, the 149 A current through the 0.350 H inductor can be shut off in about 0.704 seconds without exceeding the induced emf limit of 74.0 V.
To know more about inductance visit :
https://brainly.com/question/25484149
#SPJ11
An element becomes a positively charged ion when itloses protons.loses electrons.gains electrons.gains neutrons.
Answer:
An element becomes a positively charged ion when it losses electron.
Explanation:
Charged material experiences a force when it is exposed to an electromagnetic field due to the physical property of electric charge. You can have a positive or negative electric charge (commonly carried by protons and electrons respectively). Unlike charges attract one another while like charges repel one another. Neutral refers to an object that carries no net charge.
Electric charge is a conserved attribute, meaning that the net charge—that is, the sum of the positive and negative charges in an isolated system—cannot change. Subatomic particles carry an electric charge. In the nuclei of atoms, protons have positive charge and electrons carry negative charge in normal matter.
So, an element becomes a positively charged ion when it loses negative charge, that is, electron.
order for our moon
When the moon first formed, it was only 14,000 above the Earth's surface outside f
Roche limit. It took only to 100
to form.
When the moon first formed, it was only 14,000 miles above the Earth's surface outside the Roche limit.
The distance between two celestial bodies which are held together with the force of gravity between them, is called the Roche limit or Roche radius.
The order for our moon is that,
When the moon first formed, it was only 14,000 miles above the Earth's surface outside the Roche limit.
It took only to 100 years to form.
To learn more about Roche limit, click:
https://brainly.com/question/30788789
#SPJ1
Air flows at along a flat surface when it encounters a jet of air issuing from the horizontal wall at point as in Fig. The jet volume flow is per unit depth into the paper. If the jet is approximated as an inviscid line source, ( ) locate the stagnation point on the wall. ( ) How far vertically will the jet flow extend into the stream?
(a) If the jet is approximated as an inviscid line source, locate at 0.05308m stagnation point on the wall.(b) 0.1067m vertically will the jet flow extend into the stream.
The sink strength is related the volume flow to the depth into the flat surface,
m= θ/2πb
θ = jet volume flow
b = depth into paper
m= 0.4/2×3.14×1
m= 0.0637m²/s
(a) The stagnation point from the wall,
v₀ = velocity of water along the axis.
a = m/v₀
a= 0.0637/1.7
a = 0.05308m
(b)The jet flow vertically exert into the stream
L= 2a
L = 2 ×0.05308
L = 0.1067m
Therefore, If the jet would be approximated as an inviscid line source, locate at 0.05308m stagnation point on the wall. 0.1067m vertically would be the jet flow extend into the stream.
The complete question is,
air flows at 1.2 m/s along a flat surface when it encounters a jet of air issuing from the horizontal wall at point a, as in fio p8.16. the jet volume flow is 0.4 m/s per unit depth into the paper. if the jet is approximated as an inviscid line source, (a) locate the stagnation point s on the wall. (b) how far vertically will the jet flow extend into the stream?
To know more about Jet
https://brainly.com/question/29343430
#SPJ4
21.15 the 20-lb disk rolls on the horizontal surface. its radius is the spring constant is at the spring is unstretched and the disk has a clockwise angular velocity of 2 rad/s. what is the amplitude of the resulting vibrations of the center of the disk?
The angular velocity of the disk remains constant as it rolls on the horizontal surface. However, the spring will introduce vibrations to the system.
The amplitude of these vibrations will depend on the spring constant and the radius of the disk. Without knowing these values, it is impossible to determine the amplitude of the resulting vibrations of the center of the disk.
To find the amplitude of the resulting vibrations of the center of the disk, we need to consider the system's properties: constant, velocity, and vibrations. Given the disk has a constant clockwise angular velocity of 2 rad/s,
we can calculate the linear velocity (v) of the disk using the formula v = rω, where r is the radius of the disk, and ω is the angular velocity. However, the radius is not provided in the question. Once we have the linear velocity, we can examine the spring and its spring constant (k).
Unfortunately, the spring constant value is also missing in the question. With both the linear velocity and the spring constant, we can then use the equations of motion for a simple harmonic oscillator to determine the amplitude (A) of the resulting vibrations.
To know more about velocity click here
brainly.com/question/17127206
#SPJ11
A ray of light is travels through air (n = 1.00) and into a Lucite block. Its velocity slows to 2.14 x 10^8 m/s. What is the index of refraction for Lucite?
A ray of light is travels through air (n = 1.00) and into a Lucite block. Its velocity slows to 2.14 x 10⁸ m/s. The index of refraction for Lucite is 1.40.
What is index of refraction?An optical media's refractive index, also known as refraction index, is a dimensionless number that indicates how well the medium bends light.With wavelength, the refractive index may change. When refracted, this allows white light to separate into its component hues. It's known as dispersion. In prisms, rainbows, and as chromatic aberration in lenses, this phenomenon can be seen. A refractive index with a complex value can be used to describe how light moves through absorbent materials. The attenuation is then taken care of by the imaginary part, while refraction is handled by the real part. For the majority of materials, the refractive index varies by several percent with wavelength over the visible spectrum.
The index of refraction for Lucite can be calculated by using the equation,
n = [tex]\frac{c}{v}[/tex], where c is the speed of light in a vacuum and v is the speed of light though Lucite.
So, in this case,
n =[tex]\frac{3 * 10^8}{2.14*10^8}[/tex] = 1.40
To know more about chromatic aberration, visit:
https://brainly.com/question/7550245
#SPJ1
20. A 0.254-m diameter circular saw blade rotates at a constant angular speed of 117 rad/s. What is the tangential speed of the tip of a saw tooth at the edge of the blade?
A) 29.7 m/s
B) 14.9 m/s
C) 9.46 m/s
D) 7.45 m/s
E) 2.17 m/s
The tangential speed of the tip of a saw tooth at the edge of the blade is 14.9 m/s.
To find the tangential speed of the tip of a saw tooth at the edge of the blade, we can use the following formula:
tangential speed = radius x angular speed
The radius of the circular saw blade is half of its diameter, which is 0.254/2 = 0.127 m. The angular speed is given as 117 rad/s. Thus, we can calculate the tangential speed as:
tangential speed = 0.127 m x 117 rad/s = 14.859 m/s
Rounding to two significant figures, we get the answer as 14.9 m/s, which is option B. Therefore, the tangential speed of the tip of a saw tooth at the edge of the blade is 14.9 m/s.
learn more about tangential speed Refer: https://brainly.com/question/17446849
#SPJ11
Question 12
The greatest exposure to human made ionizing radiation for most individuals is through:
a. Eating plants that contain radioactive elements
b. Medical x-rays
c. Nuclear power plant emissions
d. Building made of stone
The greatest exposure to human-made ionizing radiation for most individuals is through medical X-rays.
Therefore the answer is b. Medical x-rays.
Medical X-rays are a common source of ionizing radiation exposure for many people. X-rays use electromagnetic radiation to produce images of the inside of the body, and the radiation can potentially damage living tissue at high doses. While the dose from a single X-ray is usually small, frequent or unnecessary medical imaging can increase an individual's cumulative exposure. Eating plants that contain radioactive elements, living in a building made of stone, and exposure to nuclear power plant emissions can also result in ionizing radiation exposure, but these sources are generally less significant than medical X-rays for most individuals.
Therefore, the greatest exposure to human made ionizing radiation for most individuals is through medical X-rays. Hence the correct answer is option b.
The level of radiation exposure also depends on a variety of factors, such as the type of radiation, the duration of exposure, and the distance from the source. To minimize the risk of radiation exposure, it is important to use medical imaging only when necessary, follow appropriate safety procedures in radiation-related occupations, and limit exposure to other sources of ionizing radiation when possible.
To know more on electromagnetic radiation
https://brainly.com/question/10759891
#SPJ4
A 110 kg football player runs at 8 m/s and plows into an 80 kg referee that is standing still on the football field. The referee moves forward at 5 m/s.
a. What is the momentum of the football player before the collision?
b. What is the momentum of the referee before the collision?
c. What is the total momentum before the collision? (Hint: add a and b)
d. What is the momentum of the referee after the collision?
e. What must be the momentum of the football player after the collision?
f. Find the football players speed after the collision.
Answer:
See below
Explanation:
(a) Momentum can be solved with the formula: p = mv, where m and v are mass and velocity, respectively. So, p = (110kg) * (8m/s) = 880 kg* m/s
(b) Since v = 0 m/s, p = 0 kg * m/s
(c) The total momentum is 880 + 0 = 880 kg * m/s
(d) pi = pf
880 = 190 *vf -----> vf = 4.631 m/s
p = mv = (80kg) * (4.631 m/s) = 370.53 kg * m/s
(e) p = mv = (110kg) * (4.631 m/s) = 509.47 kg * m/a
(e) 4.631 m/s (as solved in part (d) )
A 50 kg sprinter, starting from rest, runs 50m in 7.0s at constant acceleration.a. What is the magnitude of the horizontal force acting on the sprinter?b. What is the sprinter’s power output at 2.0 s, 4.0 s, and 6.0s?
The magnitude of the horizontal force acting on the sprinter is 56 N, the sprinter's power output at 2.0 s is 125.44 W, at 4.0 s is 251.68 W, and at 6.0 s is 376.32 W.
a. To find the magnitude of the horizontal force acting on the sprinter, we can use the following kinematic equation:
[tex]d = 0.5 * a * t^2[/tex]
where d is the distance traveled (50m), t is the time taken (7.0s), and a is the acceleration of the sprinter.
Solving for a, we get:
[tex]a = 2 * d / t^2[/tex]
[tex]= 2 * 50m / (7.0s)^2[/tex]
[tex]= 1.12 m/s^2[/tex]
Next, we can use Newton's second law of motion, which states that the net force acting on an object is equal to its mass times its acceleration:
F_net = m * a
Substituting the values, we get:
[tex]F_net =[/tex][tex]50kg * 1.12 m/s^2[/tex]
= 56 N
Therefore, the magnitude of the horizontal force acting on the sprinter is 56 N.
b. The power output of the sprinter can be calculated using the following formula:
P = F * v
where P is the power, F is the force, and v is the velocity.
At 2.0 s:
The sprinter's velocity can be found using the following kinematic equation:
v = a * t
where a is the acceleration found earlier [tex](1.12 m/s^2)[/tex], and t is the time taken (2.0 s).
Substituting the values, we get:
[tex]v = 1.12 m/s^2 * 2.0 s= 2.24 m/s[/tex]
Using the formula for power, we get:
[tex]P = 56 N * 2.24 m/s= 125.44 W[/tex]
Therefore, the sprinter's power output at 2.0 s is 125.44 W.
At 4.0 s:
The sprinter's velocity can be found using the same kinematic equation as before:
v = a * t
Substituting the values, we get:
[tex]v = 1.12 m/s^2 * 4.0 s= 4.48 m/s[/tex]
Using the formula for power, we get:
[tex]P = 56 N * 4.48 m/s= 251.68 W[/tex]
Therefore, the sprinter's power output at 4.0 s is 251.68 W.
At 6.0 s:
The sprinter's velocity can be found using the same kinematic equation as before:
v = a * t
Substituting the values, we get:
[tex]v = 1.12 m/s^2 * 6.0 s= 6.72 m/s[/tex]
Using the formula for power, we get:
[tex]P = 56 N * 6.72 m/s= 376.32 W[/tex]
Therefore, the sprinter's power output at 6.0 s is 376.32 W.
to know more about power refer here:
https://brainly.com/question/13937812#
#SPJ11
Question 100
Leaching from a garbage dump has been found to pollute wells
a. 2000 feet away
b. 1400 feet away
c. 100 feet away
d. 50 feet away
Leaching from a garbage dump can cause groundwater pollution, which can contaminate wells and threaten human health. In this case, the answer is (c) 100 feet away,
The distance at which wells can be affected by pollution depends on various factors, such as the type and amount of waste, the permeability of soil and the depth of the groundwater table. In this case, the answer is (c) 100 feet away, which means that the contamination has spread relatively close to the dump site. This highlights the importance of proper waste management practices to prevent groundwater pollution and protect public health.
Learn more about Leaching
https://brainly.com/question/2373295
#SPJ4
Question 42 Marks: 1 Beta particles can be stopped by a few millimeters of aluminum.Choose one answer. a. True b. False
a. True. Beta particles are high-energy electrons or positrons that can be stopped by thin layers of materials such as aluminum, which can block them after a few millimeters.
Beta particles, which are high-energy electrons emitted from some radioactive elements, can be blocked by a few millimeters of aluminum. Aluminum is an effective shield because of its high atomic number and because it is a good conductor of electricity. The aluminum absorbs the beta particle, preventing it from traveling any further. In addition, because aluminum is a good conductor of electricity, it helps to dissipate the energy of the beta particle, diminishing its power.
To learn more about beta particles click here https://brainly.com/question/3580345
#SPJ11
The magnetic field at the center of a circular coil of wire with N0 turns and radius R0 and carrying current I0 can be doubled by:
The magnetic field at the center of a circular coil can be doubled by either doubling the number of turns (No) to 2No or doubling the current ([tex]I_{0}[/tex]) to 2[tex]I_{0}[/tex].
The magnetic field at the center of a circular coil is given by the formula B = (μ0 * No * [tex]I_{0}[/tex]) / (2 * [tex]R_{0}[/tex]), where μ0 is the permeability of free space. To double the magnetic field, we need to increase the numerator of the formula by a factor of 2. This can be achieved by either increasing the number of turns No or the current [tex]I_{0}[/tex]. Alternatively, we can decrease the radius [tex]R_{0}[/tex] by a factor of √2, since the magnetic field is inversely proportional to the radius. Therefore, the magnetic field at the center of a circular coil can be doubled by increasing the number of turns or the current, or by decreasing the radius by a factor of √2.
Learn more about permeability here: https://brainly.com/question/1023696
#SPJ11
the speed of sound increases by about 0.4 m/s for each degree celsius when the air temperature rises. for a given sound, as the temperature increases, what happens to the wavelength?
As the temperature of the air increases, the speed of sound also increases.
This is because warmer air molecules move faster and collide with each other more frequently, which makes sound waves travel faster through the medium.
According to the given information, the speed of sound increases by about 0.4 m/s for each degree Celsius of temperature rise.
The wavelength of a sound wave is directly proportional to the speed of sound in the medium. This means that as the speed of sound increases, the wavelength of the sound wave also increases.
The relationship between the two is described by the formula:
wavelength = speed of sound / frequency
Since the frequency of the sound wave remains constant, an increase in the speed of sound due to a rise in temperature will result in an increase in the wavelength of the sound wave.
Therefore, as the air temperature increases, the wavelength of the sound wave also increases.
It is worth noting that the effect of temperature on sound waves is more significant for high-frequency sounds, such as those produced by musical instruments or human speech.
This is because high-frequency sounds have shorter wavelengths and are more strongly influenced by changes in the speed of sound. In summary, as the air temperature rises, the speed of sound increases, resulting in an increase in the wavelength of the sound wave.
To know more about temperature of the air here
https://brainly.com/question/26706491
#SPJ11
The wavelength of a particular sound decreases as air temperature increases.
This is due to the fact that while the frequency of sound fluctuates with temperature, the speed does not. Since speed equals frequency times wavelength, the equation must hold if speed increases while the frequency remains constant. In other words, since the speed has increased, the same number of waves will pass a location in less time, hence the wavelength must be smaller to make up for it. In disciplines like acoustics and meteorology, this phenomenon—known as the dependence of the speed of sound on temperature—must be taken into account.
learn more about wavelength here:
https://brainly.com/question/13533093
#SPJ11
What do you think could happen if your epiglottis malfunctions?
The epiglottis acts as a small, moveable "lid" that lies close to the throat & stops liquids and food against entering the windpipe. Epiglottis edoema might totally restrict the airway. This can result in difficulty breathing or failure of respiration.
What leads to the covering of the throat to fail?Epiglottitis usually occurs by a bacterial infection of H. influenzae type b (Hib). Hib can induce a variety of dangerous diseases, including pneumonia and meningitis, in addition to epiglottitis.
Is it possible to injure the epiglottis?Any epiglottis injury can impair an individual's capacity to eat, communicate, and possibly breath effectively. The epiglottis can be damaged for a variety of reasons, including malignancy, injury, and infection. In such circumstances, surgical reconstruction can be used to repair the epiglottis.
To know more about liquids visit:
https://brainly.com/question/9716973
#SPJ1
2) What is the thickness of the disk of the Milky Way? A) 100 light-years B) 1,000 light-years C) 10,000 light-years D) 100,000 light-years E) 1,000,000 light-years
The thickness of the disk of the Milky Way is approximately 1,000 light-years. This thickness varies somewhat depending on the method used to measure it, as the disk is not perfectly flat and uniform.
The disk is a flat, pancake-shaped structure that contains most of the stars, gas, and dust in the galaxy. The thickness of the disk varies somewhat across its diameter, but it is generally around 1,000 light-years thick. This means that the distance from the top of the disk to the bottom is about 1,000 light-years. The thickness of the disk is important because it affects the way stars and other objects move within the galaxy. The thickness of the disk is also related to the rate at which new stars are formed, as gas and dust in the disk collapse and coalesce to form new stars. Understanding the structure and thickness of the Milky Way's disk is an important part of understanding the galaxy as a whole.
To learn more about Milky Way, refer:-
https://brainly.com/question/30714548
#SPJ11
Which stars are the most common?
A) Stars with a larger mass and a larger radius than the Sun's are the most common.
B) Stars with a smaller mass and a smaller radius than the Sun's are the most common.
C) Stars with a larger mass and a smaller radius than the Sun's are the most common.
D) Stars with a smaller mass and a larger radius than the Sun's are the most common.
E) All of the above are equally common.
Stars are born within the clouds of dust and scattered throughout most galaxies. A familiar example of such as a dust cloud is the Orion Nebula. The correct answer about stars is B
Stars are the most widely recognized astronomical objects, and represent the most fundamental building blocks of galaxies. The age, distribution, and composition of the stars in a galaxy trace the history, dynamics, and evolution of that galaxy. Moreover, stars are responsible for the manufacture and distribution of heavy elements such as carbon, nitrogen, and oxygen, and their characteristics are intimately tied to the characteristics of the planetary systems that may coalesce about them. Consequently, the study of the birth, life, and death of stars is central to the field of astronomy. The most common stars in the universe are those with a smaller mass and a smaller radius than the Sun's. Therefore, the correct answer is B) Stars with a smaller mass and a smaller radius than the Sun's are the most common. These stars are known as red dwarfs and they make up about 70-80% of all stars in the universe. Stars with a larger mass and radius than the Sun's, such as blue giants or super giants, are much less common.
learn about stars,
https://brainly.com/question/5284480
#SPJ11
1) If we could see our own galaxy from 2 million light-years away, it would appear
A) as a flattened disk with a central bulge and spiral arms.
B) as a faintly glowing band of light stretching all the way around the sky.
C) to fill the sky with widely spaced stars.
D) like a single, dim star.
A) If we could see our own galaxy from 2 million light-years away, it would appear as a flattened disk with a central bulge and spiral arms.
This is because our galaxy, the Milky Way, has a spiral structure with a central bulge surrounded by a disk containing the spiral arms. The stars, gas, and dust within these arms emit light, making the galaxy visible as a flattened disk with a central bulge and spiral arms from a distance.From a distance of 2 million light years, it would appear as a flattened disk with a central bulge and spiral arms. This structure is visible from Earth, but from a distant perspective it would be difficult to see any individual stars.
learn more about galaxy Refer: https://brainly.com/question/31361315
#SPJ11
If the air temperature remains constant, evaporating water into the air will ________ the dew point and ________ the relative humidity.
-increase, decrease
-decrease, increase
-decrease, decrease
-not change, increase
-increase, increase
If the air temperature remains constant, evaporating water into the air will increase the dew point and decrease the relative humidity. The dew point is the temperature at which the air becomes saturated with water vapor and condensation begins to form.
Relative humidity is the ratio of the amount of water vapor in the air to the maximum amount of water vapor the air can hold at a given temperature and pressure.
When water evaporates into the air, it increases the amount of water vapor in the air. This increase in water vapor content causes the dew point to increase since more water vapor is required to saturate the air. In other words, the air can hold more water vapor before reaching saturation.
At the same time, the increase in water vapor content from evaporation can cause the relative humidity to decrease, since the amount of water vapor in the air is increasing without an increase in the maximum capacity for water vapor at that temperature. This means that the air is becoming less saturated since the ratio of water vapor in the air to the maximum amount it can hold is decreasing.
Overall, the increase in dew point and decrease in relative humidity from evaporating water into the air can have important effects on weather patterns and human comfort and are important factors to consider in a variety of fields, from meteorology to agriculture to building design.
Find out more about air temperature
brainly.com/question/31480624
#SPJ11
a coil is placed next to a straight wire. the current in the wire is as shown in the diagram below. the coil and wire lie in the same plane with the z axis perpendicular to the plane of the coil. (a) as the current in the wire increases, find the direction of the induced current in the coil by answering the following questions. (i) what is the direction of the magnetic field due to the current carrying wire in the center of the coil? ---select--- (ii) as the current in the wire increases, how will the magnetic flux in the coil change? ---select--- (iii) what is the direction of the induced magnetic flux in the coil? ---select--- (iv) what is the direction of the induced current in the coil? ---select---
The magnetic field produced by the current-carrying wire at the coil's centre is directed into or away from the coil and perpendicular to its plane.
The magnetic flux through the coil grows as the wire's current increases. The magnetic field produced by the coil's induced magnetic flux opposes the change that caused it, counteracting the wire's growing magnetic field.
Thus, in accordance with Lenz's law, the induced current in the coil moves in a direction that opposes the rise in the magnetic field of the wire in an effort to keep the system in balance.
For more details regarding magnetic field visit:
https://brainly.com/question/14848188
#SPJ12
Question 50 Marks: 1 The amount of heat required to lower one pound of a product one degree Fahrenheit isChoose one answer. a. exothermal extraction b. the specific heat c. the coolant factor d. important to know
The correct answer is Specific heat.
The amount of energy required to raise the temperature of one pound of water by one degree Fahrenheit at standard atmospheric pressure is called specific heat in BTU (British Thermal Unit) which is a unit of measurement for energy used as per the British system.
BTU is used for measuring the heating or cooling capacity of an appliance as per the FPS system. For example, the BTU rating of a furnace or air conditioner indicates how much heat or cooling it can produce in a given period of time.
For more info on specific heat refer,
https://brainly.com/question/11297584
#SPJ4
For the Rockwell Hardness tester, what is the minor load that is usually applied to the indenter?
The minor load that is usually applied to the indenter in the Rockwell Hardness test is 10 kgf (kilogram-force).
The Rockwell Hardness test is a popular method used to measure the hardness of metals and other materials. It measures the depth of indentation made by an indenter under a specific load, and is expressed as a hardness number.
The Rockwell test uses two loads: a minor load and a major load. The minor load is applied first to set the position of the indenter, and is usually 10 kgf. The major load is then applied to make the indentation, and can vary depending on the hardness of the material being tested.
After the major load is removed, the depth of the indentation is measured using a dial gauge or other instrument, and the Rockwell hardness number is determined based on the difference between the depth of the indentation with the major load and the depth of the indentation with the minor load.
For more question on indenter click on
https://brainly.com/question/30465430
#SPJ11
(330-116) The metallic sheath of metal-clad cable shall be continuous and _____.
(330-116) The metallic sheath of metal-clad cable shall be continuous and bonded or grounded.
In interlocking or corrugated sheath Type MC cable, the requirement for a minimum bend radius of 10 times the external diameter of the metallic sheath is a crucial safety feature that works to avoid damage to the cable's insulation and lower the possibility of electrical failure. Electricians and electrical contractors can make sure that their electrical systems are secure and operate at their best by adhering to this criterion.
The National Electric Code (NEC) mandates that bends in interlocking or corrugated sheath Type MC cable have radii that are at least ten times larger than the metallic sheath's exterior diameter. This condition was put in place to prevent the cable's insulation from being damaged, which could result in a reduction in electrical performance or perhaps a dangerous situation.
To know more about metallic sheath
https://brainly.com/question/30580756
#SPJ4
As a roller coaster travels down a hill, it accelerates at a rate of 7 m/s. If its speed at the top of the hill is 3 m/s what is its speed after 4 seconds
The speed of the roller coaster after 4 seconds will be 31[tex]\sf{ms^{-1}}[/tex]
We know that,
[tex]\larger{\bf{\boxed{\boxed{v = u + at}}}}[/tex]
where,
v = final velocity u = initial velocity = 3 [tex]\sf{ms^{-1}}[/tex]a = acceleration = 7 [tex]\sf{ms^{-2}}[/tex]t = time = 4 seconsAfter putting all values
[tex]\implies{\sf{v = 3 + (7 \times 4)}} \\ \implies{\sf{v = 3 + 28}} \\ \bf{\implies{v = 31 \ ms^{-1}}}[/tex]
Learn more on :
https://brainly.com/question/14344386https://brainly.com/question/24905073Question 49
The major target for damage associated with ultraviolet radiation is:
a. Cellular DNA
b. The skin
c. The eyes
d. The liver
Cellular DNA is the main component of UV radiation damage.
The sun emits ultraviolet (UV) radiation, a form of electromagnetic radiation that can harm living tissues. Cellular DNA, which is particularly susceptible to the effects of UV radiation, is the main target for this damage. The creation of thymine dimers, which can obstruct DNA replication and transcription, is one type of damage that can result from UV light absorption by DNA. This might result in mutations that eventually cause cancer or other disorders. In addition, UV radiation can harm the skin and eyes, but cellular DNA is the area where it has the greatest long-term effect.
learn more about UV radiation here:
https://brainly.com/question/13849635
#SPJ11
the greater the temperature difference between two heat reservoirs group of answer choices the greater their heights. the less work can be done. the more work can be done. the more water can flow.
The greater the temperature difference between two heat reservoirs, the more work can be done.
This is because heat naturally flows from hotter to cooler objects, so a larger temperature difference means there is more heat available to be converted into work. The height of the reservoirs is not directly related to the amount of work that can be done. The term "reservoirs" refers to the sources of heat, which can be anything from a power plant to the sun. This is due to the fact that heat naturally flows from a high-temperature region to a low-temperature region. With a larger temperature difference, this flow of heat is more significant, enabling more work to be done by the system.
learn more about temperature Refer: https://brainly.com/question/4160783
#SPJ11
7. During the spin-dry cycle of a washing machine, the motor slows from 90 rad/s to 30 rad/s while the turning the drum through an angle of 180 radians. What is the magnitude of the angular acceleration of the motor?
A) 64 rad/s2
B) 32 rad/s2
C) 10 rad/s2
D) 20 rad/s2
E) 1.0 rad/s2
20 rad/s^2 is the magnitude of the angular acceleration of the motor.
To find the angular acceleration of the motor, we need to use the formula:
angular acceleration = (final angular velocity - initial angular velocity) / time
In this case, we are given the initial and final angular velocities, but we don't know the time it takes for the motor to slow down. However, we do know the angle through which the drum turns during this time.
We can use the formula:
angle = (1/2) * angular acceleration * time^2
Rearranging this formula to solve for time, we get:
time = sqrt(2 * angle / angular acceleration)
Substituting the given values, we get:
180 = (1/2) * angular acceleration * (sqrt(2 * 180 / angular acceleration))^2
Simplifying:
180 = angular acceleration * 2 * 180 / angular acceleration
180 = 360
This is not possible, so we made a mistake somewhere. Let's try another approach.
We can use the formula:
final angular velocity^2 = initial angular velocity^2 + 2 * angular acceleration * angle
Substituting the given values, we get:
30^2 = 90^2 + 2 * angular acceleration * 180
Simplifying:
900 - 8100 = 360 * angular acceleration
-7200 = 360 * angular acceleration
angular acceleration = -20 rad/s^2
This answer is negative, which means that the motor is decelerating. To get the magnitude of the angular acceleration, we need to take the absolute value:
magnitude of angular acceleration = |-20| = 20 rad/s^2
Therefore, the correct answer is D) 20 rad/s^2.
learn more about magnitude here
https://brainly.com/question/3371255
#SPJ11
Which describes how the spring constant affects the potential energy of an object for a given displacement from an
equilibrium position?
O The higher the spring constant, the greater the gravitational potential energy.
O The lower the spring constant, the greater the gravitational potential energy.
O The higher the spring constant, the greater the elastic potential energy.
O The lower the spring constant, the greater the elastic potential energy.
Answer: C.
Explanation:
The higher the spring constant, the greater the elastic potential energy.
Friction is a force that resists the relative motion of two objects in contact.
Why is the speciality of putting the word relative motion without putting motion
Answer:
Explanation:
Friction is a force that opposes the motion or potential motion of two items that come into contact. The word "relative motion" emphasizes that friction resists the motion of the objects with respect to one other, and it emphasizes that friction specifically operates against the motion or potential motion between two objects in contact.