Which is the correct statement regarding the relative Rf values of the starting methyl benzoate vs the product, methyl m-nitrobenzoate on a silica gel TLC plate? a. The product has a lower Rf value on a silica gel TLC plate because it is more polar than the starting methyl benzoate. b. The product has a lower Rf value on a silica gel TLC plate because it is less polar than the starting methyl benzoate. c. The product has a higher Rf value on a silica gel TLC plate because it is less polar than the starting methyl benzoate. d. The product has a higher Rf value on a silica gel TLC plate because it is more polar than the starting methyl benzoate.

Answers

Answer 1

The correct statement regarding the relative Rf values of the starting methyl benzoate vs the product, methyl m-nitrobenzoate on a silica gel TLC plate is (a) the product has a lower Rf value on silica gel TLC plate because it is more polar than starting material methyl benzoate.

There are many pores in silica gel, each of which can hold water; as is well known, water carries a polar charge. So we may say that the silica gel that serves as our stationary phase is polar. Because "like dissolves like" in chemistry, polar compounds interact with other polar substances. If there is a greater interaction, the Rf value will also be lower. Rf value is the molecular distance on TLC plate. Since the nitro group in this example is polar, it will interact with the water in the silica gel and as a result, will travel less distance, resulting in a lower Rf value than the methyl benzoate, which does not connect with the water in the silica gel because it lacks polar groups and therefore runs more quickly and covers a greater distance, leading to a higher Rf. So option (a) is the right option.

You can also learn about Rf value from the following question:

https://brainly.com/question/17132198

#SPJ4


Related Questions

not all of the orbitals in the n = 4 shell are shown in this figure.which subshells are missing?

Answers

The 4d and 4f subshells of the orbitals are not shown in the figure when n=4.

Subshell energies are determined by examining orbital diagrams showing how the subshells are arranged. The 1s orbital has the lowest energy, the 2s orbital has slightly higher energy than her 1s orbital, and so on. Electrons in orbits farther from the nucleus have higher energies.

The closer the orbitals, the greater the nuclear charge experienced by the electrons in them. 4d experiences a larger nuclear charge than 4f because 4d is closer to the nucleus.

Inside the subshell are orbitals. The s subshell contains 1 orbital, the p subshell contains 3 orbitals, the d subshell has 5 orbitals, and the f subshell has 7 orbitals. Every orbital can hold up to 2 electrons.

For more information on orbitals , visit :

https://brainly.com/question/2263604

#SPJ4

hydrogen is in group 1 of the periodic table. which kind of bond would form between two hydrogens?(1 point)

Answers

A covalent bond would form because the electron would be shared, so both hydrogen's have a full and stable shell.

What is covalent bond?

The exchange of one or more pairs of electrons between two atoms forms a covalent connection. The two atomic nuclei are concurrently drawing these electrons to them. When the difference between the electronegativities of two atoms is too tiny for an electron transfer to take place to create ions, a covalent bond is formed.

Covalent bonds were first described in 1939. The word "covalent bond" is derived from the prefix co-, which means jointly, associated in action, partnered to a lesser extent, etc. The hydrogen atoms share the two electrons through covalent bonding since the prefix co- implies jointly, associated in action, etc.

Given element is hydrogen.  

Although the element hydrogen is placed along with the alkali metals in group 1, the hydrogen atom act as a non-metal.

Hence to complete its valence shell, it shares 1 electron with another hydrogen atom and forms a covalent bond.

To know more about covalent bond refer to:

https://brainly.com/question/3447218

#SPJ1

what is the leaving group when acetic anhydride is reacted with ethanol in a nucleophilic acyl substitution reaction?

Answers

BH3/THF with H2O2/NaOH is the leaving group when acetic anhydride is reacted with ethanol in a nucleophilic acyl substitution reaction

Corn and other plant resources are used to make ethanol, a sustainable fuel. In the United States, ethanol is widely used and is present in more than 98% of gasoline. E10 (10% ethanol, 90% gasoline) is the most widely used ethanol mix. The production of medicines, polymers, lacquers, polishes, plasticizers, and cosmetics all need ethanol. In medicine, ethanol is employed as a topical anti-infective and as an antidote for methanol or ethylene glycol overdose. More than two billion people consume ethanol (also known as ethyl alcohol) daily.

Learn more about ethanol here:

https://brainly.com/question/25002448

#SPJ4

If the temperature of a fixed amount of an ideal gas is increased, it NECESSARILY follows that?
a. the pressure of the gas will increase.
b. the volume of the gas will increase.
c. the average kinetic energy will increase
d. All of the above statements are correct.

Answers

The volume of an ideal gas must obviously rise if the temperatures of a fixed sum of the gas is raised.

Explain what an ideal gas is.

The phrase "ideal gas" describes a fictitious gas made up of molecules that adhere to the following principles: No attraction or repellence exists between the molecules of ideal gases. Only an unbalanced force upon impact would occur between molecules of a perfect gas.

What is the ideal gas worth?

Because when pressure is expressed in kPa, the real gases characteristic is found to be 8.314J/Kmol. The pressure, area, temperature, & number of moles of an ideal gas are all related by a single equation known as the ideal gas law. Pressure, density, & temperature of a gas are related by the combined gas law.

To know more about ideal gas visit:

https://brainly.com/question/28257995

#SPJ4

Which choice is not true of a liquid in a glass capillary with a convex meniscus?
The liquid has strong cohesive forces.
The liquid level will be lower inside the capillary when a capillary is inserted into a bowl of the liquid.
The liquid will have a convex meniscus as it moves in the capillary.
The behavior of the liquid is driven by strong interactions with the capillary glass.

Answers

If the liquid's behavior in a glass capillary with a convex meniscus is determined by strong interactions with the capillary glass, then the alternative is false. Thus, option D is the best choice.

Capillaries made of glass come in a variety of outer diameters, from 0.1 mm to 2.0 mm. They are made for x-ray data collecting and can mount, hold, and store crystals of tiny molecules and biological macromolecular specimens. Additionally, crystal density measurements and crystal development investigations can be conducted with the use of capillaries.

Healthcare establishments like hospitals, clinics, doctors' offices, blood banks, and labs all employ glass capillary tubes to collect blood samples for analysis.

To know more about this question:

https://brainly.com/question/2527934

#SPJ4

The right question is:

Which choice is not true of a liquid in a glass capillary with a convex meniscus?

The liquid has strong cohesive forces.The liquid level will be lower inside the capillary when a capillary is inserted into a bowl of liquid.The liquid will have a convex meniscus as it moves in the capillary.The behavior of the liquid is driven by strong interactions with the capillary glass.

pressure has little effect on the solubility of liquids and solids because they are almost incompressible. This state of True Or False
- True
- False

Answers

Pressure has little effect on the solubility of liquids and solids because they are almost incompressible. This statement is True. Solid solubility hardly gets affected by changes in pressure.

A substance's physical and chemical characteristics affect how soluble it is. A few other factors and circumstances can also influence it. A few of them are: temperature, pressure, type of binding, and forces between the particles.

Pressure has a significantly greater impact on gases than it does on solids and liquids. The likelihood of a gas's solubility also increases as its partial pressure rises. One instance of how CO2 is stored under high pressure is in a soda bottle.

In like, like dissolves.

Each molecule has a unique set of intermolecular forces and connections. The likelihood of solubility between two dissimilar compounds is less likely than that between like substances. For instance, ethanol is highly soluble in water, a polar solvent, whereas water is not.

To learn more about  solubility Please click on the given link:

https://brainly.com/question/23946616

#SPJ4

if 0.300 moles of nitrogen gas occupies 0.600 l under certain conditions, what number of moles occupies 1.500 l under the same conditions? 0.300 moles 1.50 moles 0.750 moles 0.950 moles

Answers

0.750 moles of nitrogen will occupy 1.500 I under certain conditions in which 0.300 moles of nitrogen gas occupies 0.600.

The amount of moles of a gas is proportional to the volume it occupies under certain conditions. Therefore, the number of moles of a gas that occupies 1.500 liters under the same conditions can be determined by using the following equation:

Moles = (Volume of original sample × Moles of the original sample) / Volume of new sample

Moles = (0.600 liters × 0.300 moles) / 1.500 liters

Moles = 0.750 moles

Therefore the correct answer to this question is option number 3 which is   0.750 moles.

For more questions like Volume occupied click the link below:

https://brainly.com/question/22622383

#SPJ4

the empirical formula for a compound containing 26.0 % n and 74.0 % o by mass is selected answer: a. n2o5 correct answer: a. n2o5

Answers

The empirical formula for a compound is N2O5, that can be calculated by considering the masses of elements.

The simplest whole number ratio of atoms present in a compound. The mass composition for both the elements is given which is as follows:

N = 26g and O = 74g

Now we will divide the above masses with respect to the Molecular mass of each element;

N = 26/14 = 1.857 moles  and for O = 74/16 = 4.625 moles

Now as we have molar ratio of each species;

We will divide the mole ratio by smallest number and round off to nearest decimal;

1.857/4.625 ~ 2/5                (say divide by 0.9 approx.)

Which will give a composition of N2O5.

To learn more about empirical formula check the link below:

https://brainly.com/question/1603500

#SPJ4

calculate the depth below the surface of water at which the pressure due to the weight of water equals 2 atm?

Answers

The depth below the surface of water at which the pressure due to the weight of water equals 2 atm is 10.2m.

Calculation:-

Entering the known values into the expression for h gives

h = 1.01 × 105N/m2(2.00×103kg/m3)(9.80m/s2) = 10.2m.

Force normal to the surface of an object per unit area over which that force is distributed. At a point in the gas, pressure acts in all directions. At the surface of a gas, compressive forces act perpendicular to the surface. If the gas is moving as a whole, the measured pressure will be different in the direction of movement.

Pressure is defined as the physical force exerted on an object. The force applied is normal to the surface of the object per unit area. The basic formula for pressure. The unit of pressure is Pascal. Pressure types include absolute, atmospheric, differential, and gauge. Pressure is a measure of the force exerted on a surface per unit area.

Learn more about Pressure here:- https://brainly.com/question/28012687

#SPJ4

you have 100 grams of rubidium bromide (rbbr). how many moles do you have? responses 0.61 mol 0.61 mol 1.00 mol 1.00 mol 1.22 mol 1.22 mol 2.00 mol

Answers

If you have 100 grams of rubidium bromide (rbbr) then no of moles you have is 0.61 mol.

What in chemistry is an A mole?

The International Unit System uses the mole (symbol: mol) as the unit of material quantity. How so many basic entities of a particular substance are present in an item or sample is determined by the quantity of that material. One molecule or atom possesses the same weight in grams as one mole of the substance does in units of atomic mass.

Briefing:

as we know that

165.3718 g Rubidium Bromide = 1 mol

according to the question-

100 g of Rubidium Bromide = (1/165.3718 ) x 100

= 0.61 mol

To learn more about moles visit:

https://brainly.com/question/13232071

#SPJ4

compute repeat unit molecular weights for the following: (a) poly(vinyl chloride), (b) poly(ethylene terephthalate), (c) polycarbonate, and (d) polydimethylsiloxane.

Answers

Repeat unit molecular weights for the poly(ethylene terephthalate, polyvinyl chloride, polycarbonate, and polydimethylsiloxane are 62.494 g/mol, 192.164 g/mol, and 74.158 g/mol, respectively.

The mass of a molecule is its molecular weight. Gram/mole is a fundamental unit. It is the result of adding the atomic weights and atom counts of all the molecules' constituent elements.

Basic formulas for calculating molecular weight include:

Some of the most well-known elements' atomic masses are as follows:

Atomic Weight (g/mole) = Element

C = 12.01 for carbon

H - Hydrogen = 1.008

O = 16.00 for oxygen.

CI = 35.45 for chlorine.

1.

Type the chemical formula for poly vinyl chloride in the following format: H Cl C C H

Polymer's monomer unit is

Calculate the poly vinyl chloride repeat unit molecular weight.

MW = 2 (C's atomic weight) + 3 (H's atomic weight) + 4 (Cl's atomic weight) = 2 (12.01) + 3 (1.008) + 35.45

=62.494 g/mol

For poly vinyl chloride, molecular weight is calculated as the sum of the atomic weight and the number of atoms. Monomer is the name for the polymer's repeating unit

2. Compose the polyethylene terephthalate chemical equation.

The polymer's monomer unit will 

Determine the polyethylene terephthalate repeat unit molecular weight.

MW = 10 (C's atomic weight) + 8 (H's atomic weight) + 4 (Atomic weight of O

=10(12.01)+8(1.008)+4(16.00)

=192.164 g/mole

For polyethylene terephthalate, the atomic weight and number of atoms are multiplied to get the molecular weight.

Write the polycarbonate chemical equation

Determine the polycarbonate repeat unit molecular weight.

MW = 16 (C's atomic weight) + 14 (H's atomic weight) + 3 (Atomic weight of O)

=16(12.01)+14(1.008)+3(16)

=254.272 g/mole

For polycarbonate, molecular weight is calculated as the sum of the atomic weight and the number of atoms.

4. Compose the polydimethylsiloxane chemical equation.

The polymer's monomer unit is

Calculate the polydimethylsiloxane repeat unit molecular weight

MW = 2 (C's atomic weight) + 6 (H's atomic weight) + (Si's atomic weight) + (Atomic weight of O)

=2(12.01)+6(1.008)+28.09+16

=74.158 g/mol

For polydimethylsiloxane, molecular weight is calculated as the sum of the atomic weight and the number of atoms.

Learn more about Molecular weight here:

https://brainly.com/question/27988184

#SPJ4

When does a metallic bond present

Answers

Answer:

Metallic bonds occur among metal atoms.

if the ea for the forward reaction is 25 kj/mol and the enthalpy of reaction is -95 kj/mol, what is ea for the reverse reaction?

Answers

The Ea of the reverse reaction is 120 kJ/mol, that is calculated by using the enthalpy of reaction.

The Activation energy of a reverse reaction is the difference between the energy of the Activated complex and the energy of the products. The activation energy is the minimum amount of energy that must be provided for compounds to result in a chemical reaction.

Ea of the forward reaction is 25 kJ/mol.

The enthalpy of reaction is -95 kJ/mol.

No, the activation energy for a forward reaction is not equal to the activation energy for the reverse of the same reaction.

Ea = 95 + 25 = 120 KJ/mol

Therefore, the Ea of the reverse reaction is 120 kJ/mol.

To learn more about activation energy check the link below:

https://brainly.com/question/26724488

#SPJ4

predict whether, to any significant extent, ag(s) will react with 1 m hcl(aq).

Answers

Under normal conditions, Ag does not react with hydrochloric acid. However, if the HCl is concentrated and heated, it can dissolve silver to form silver chloride.

To determine whether Ag(s) will react with 1 M HCl(aq), we can consult a table of standard reduction potentials to see if the reaction is thermodynamically favorable. If the standard reduction potential for the reaction Ag(s) + [tex]H^+[/tex] (aq) -> [tex]Ag^+[/tex] + H(aq) is positive, then the reaction is not thermodynamically favorable and will not occur to a significant extent. If the standard reduction potential for the reaction is negative, then the reaction is thermodynamically favorable and will likely occur to a significant extent.

Alternatively, you can also perform a simple experiment to see if the reaction occurs. Simply mix a sample of Ag(s) with 1 M HCl(aq) and observe if any reaction occurs. If the solution becomes cloudy or if the silver metal appears to dissolve or change color, then a reaction has occurred.

To know more about reduction potentials click on below link:

https://brainly.com/question/23881200#

#SPJ4

what is a semiconductor whose electrical properties are dictated by the impurity atoms in the semiconductor?

Answers

Whose electrical properties are dictated by the impurity atoms in the semiconductor is extrinsic semiconductor.

Any member of the family of crystalline solids known as a semiconductor falls into the range of conductors and insulators in terms of electrical conductivity. Diodes, transistors, and integrated circuits are just a few of the electrical devices that use semiconductors in their production. Due to their portability, dependability, energy efficiency, and affordability, these gadgets are widely used. They have been utilized as discrete components in solid-state lasers, optical sensors, and power devices. They are capable of tolerating a wide range of current and voltage, and more importantly, they are well suited for integration into intricate but easily fabricated microelectronic circuits. They are and will continue to be the primary components of the vast majority of electronic systems, supporting applications in communications, signal processing, computation, and control.

know more about  semiconductor visit : https://brainly.com/question/8862459

#SPJ4

Question 1 of 10
What information does a reaction rate give?
A. It indicates the concentrations of products formed.
B. It indicates the equilibrium position of the reaction.
O
C. It indicates if products or reactants are preferred.
D. It indicates how fast reactants become products.

Answers

The rate of reaction is the rate at which the reactants disappear or the rate at which the products appear. Option D.

What is the rate of reaction?

The rate of a chemical reaction can be defined in a variety of ways. Some of them are:

It is the rate of disappearance of reactantsIt is the rate of appearance of productsIt is an indication of how fast reactants become products.

Before the beginning of a reaction, only reactants are present in reaction vessels. Once the reaction starts, the reactants start reacting to form products. Thus, the rate of reaction is the rate at which the reactants are being converted into products.

This can be measured by either of or a combination of the rate of disappearance of the reactants or the rate of appearance of the products.

More on the rate of reactions can be found here: https://brainly.com/question/13440548

#SPJ1

A person runs 1 km. How does his speed affect the total energy needed to cover this distance?A. A faster speed requires less total energy.B. A faster speed requires more total energy.C. The total energy is about the same for a fast speed and a slow speed.

Answers

A person runs 1 km. Then his speed affects the total energy needed to cover this distance: A faster speed requires more total energy.

In everyday life, of course, you have seen vehicles running, fans spinning, and balls rolling. However, do you realize that we are actually witnessing a kinetic energy event firsthand.

What is kinetic energy

Understanding kinetic energy Kinetic energy is the energy possessed by an object caused by the force of motion. The term kinetic comes from the Greek, 'kinetikos', which means to move. Therefore, an object moving at a certain speed must have kinetic energy, while an object that is not moving does not have kinetic energy.

Kinetic energy is also called motion energy, where the movement of an object can produce other energy. For example, motion energy can be turned into electrical energy, eventually that electrical energy can be utilized by humans.

Types of kinetic energy

Kinetic energy is divided into two types which are classified based on the movement of an object, namely:

Translational kinetic energy

This type of translation is kinetic energy produced by objects moving in a straight line with the same direction and speed. For example, a car driving on a highway and a bullet moving in a straight line.

Rotational kinetic energy

This is a condition when an object rotates. When rotating, the amount of energy in it can change. For example, the rotation of the earth around the sun, a spinning top that rotates on its axis, and a Ferris wheel.

Learn more about kinetic energy at https://brainly.com/question/26472013.

#SPJ4

2. The illustration here shows rock layers in their original order, along with a fracture in some rock
layers caused by an earthquake. Based on the evidence in the illustration, an earthquake occurred -
Caused by earthquake
A before layer W was deposited.
B. before layer X was deposited.
C. after layer Y was deposited.
D. after layer Z was deposited.
Rock Layer Z
Rock Layer Y
Rock Layer X
Rock Layer W
Rock Layer V

Answers

after the limestone's placement. demonstrates the sequence of the rock layers as well as parts of the layers' fractured due to an earthquake. According to the evidence in the graphic, there was an earthquake.

Explain what an earthquake is:

An earthquake is a quick movement of geological materials beneath the earth's surface that causes the ground to shake violently or weakly. The tectonic plate border is where the earthquakes start.

How is earthquake caused?

Although the tectonic plates are constantly moving slowly, friction causes them to become impermeable at their borders. An earthquake occurs when the stress on the edge exceeds the friction, releasing energy in waves that flow through the earth's crust and produce the shaking we experience.

To know more about earthquake visit:

https://brainly.com/question/1296104

#SPJ1

imagine the reaction in model 1 starts with zero molecules of a and 100 molecules of b. will the concentration of substance b increase or decrease as the reaction proceeds? explain.

Answers

Imagine the reaction in model 1 starts with zero molecules of a and 100 molecules of b is the concentration of b decreases .

The model 1 starts with zero molecules of a and 100 molecules of b. if we start with the zero molecules of a the  concentration of b will decreases as it will turn to the reactant. The chemical reaction occurs when the two or substance reactant to form a new product. so the reaction is given as :

A  ⇄ B

so, if in the reaction it start with the molecules of a and the b is 100 molecules than the  concentration of b decreases as the b turns in to the reactant.

To learn more about molecules here

https://brainly.com/question/27460520

#SPJ4

Why might Pacific Ocean be more conducive to volcanic activity?

Answers

Answer:

The movement of tectonic plates in the area, causes more volcanoes.

They call it the Pacific Ring of Fire

Answer:

The Pacific Ocean is more likely to experience volcanic activity because the Ring of Fire, an area in which several volcanos and earthquakes occur, is located within it.

a copper, cu(s) , electrode is immersed in a solution that is 1.00 m in ammonia, nh3 , and 1.00 m in tetraamminecopper(ii), [cu(nh3)4]2 . if a standard hydrogen electrode is used as the cathode, the cell potential, ecell , is found to be 0.057 v at 298 k . part a based on the cell potential, what is the concentration of cu2 in this solution?

Answers

A copper electrode is immersed in the solution that is 1 M in the ammonia and 1.00 M  in tetrammine copper(ii).  the concentration of the Cu²⁺ in the solution is 3.3 × 10¹¹ M.

given that :

concentration of ammonia = 1 M

concentration of the tetramine copper = 1 M

cell potential = 0.057 V

temperature = 298 K

the reaction

at cathode :

Cu²⁺  +  2e⁻  ---->  Cu      E° cathode = 0.337 V

at anode :

2H⁺  +  2e⁻  --->  H₂          E° anode = 0.00 V

electrode potential =  E° cathode -    E° anode

                                 = 0.337 - 0.00

                                 = 0.0337 V

Nernst equation :

E cell =  E° cell - (0.0591 / n ) log Q

0.055 V = 0.337 V - ( o.0591 / 2 ) log Q

log Q = 0.282 / 0.029

Q = 2.95 × 10⁻¹⁰

concentration of Cu²⁺ =  1 / Q

                                     = 1 / 2.95 × 10⁻¹⁰

                                     = 3.3 × 10¹¹ M

To learn more about electrode here

https://brainly.com/question/24002834

#SPJ4

Where can Xenon tetroxide be found in the real world

Answers

Answers

Xenon tetroxide is present in the atmosphere

What is the difference between the collision theory and the transition state theory? How do they explain the factors that affect the rate of a chemical reaction?

Answers

The basic differences between the collision theory and the transition state theory are-

Collision theory assumes a collision between reactants needs to happen before a reaction can take place. But on the other hand, during a reaction, an increase in potential energy corresponds to an energy barrier over which the reactant molecules must pass if the reaction is to proceed.The majority of collisions do not lead to a reaction, but only those in which the colliding species have: kinetic energy greater than a certain minimum called the activation energy, Ea, and the correct special orientation with respect to each other. Whereas the transition state occurs at the maximum of this energy barrier.Collision theory states that chemical reactions (in the gas phase) occur due to collisions between reactants. But transition state theory states that chemical reactions occur via going through a transition state.According to collision theory, chemical reactions occur only due to successful collisions. Although according to transition state theory, a chemical reaction will happen if and only if the reactants can overcome the activation energy barrier.

The factors that affect the rate of a chemical reaction:

Temperature: With increasing temperature reaction rate will also increase.Concentration: In a solution, if the amount of reactants increases then the reaction rate increases.Pressure: Increasing pressure increases reaction rate.State of matter: Gases react more readily than liquids, whereas liquids react more readily than solids.Catalysts: A catalyst lowers the activation energy, then the reaction rate increases.Mixing: Mixing reactants improves reaction rate.

To learn more about this topic,

https://brainly.com/question/16979430

https://brainly.com/question/16416932

which of the following is true for the solubility of nacl(s) and ch4(g) in water?

Answers

Sodium chloride will be soluble in water because it is polar molecule.

A polar molecule was one who has a slight positive charge on one end and a slight negative charge on the other. A polar molecule would be a diatomic compound, such as HF, that contains a polar covalent link.

We refer to something as being polar when it differs at either end. Some molecules also contain positive as well as negative ends; these are known as polar molecules. If not, we refer to them as non-polar. Polar objects can both attract and repel one another.

Pyramidal and V-shaped molecules were typically considered to be polar. Linear molecules, on the other hand, are thought to be non-polar through nature. Because the oxygen and hydrogen atoms have different electronegativities, water would be considered to be a polar molecule.

To know more about polar molecule.

https://brainly.com/question/15173422

#SPJ4

What is the difference between theoretical yield and actual yield? How do you calculate the percent yield of a chemical reaction?

Answers

The difference between theoretical yield and actual yield is that theoretical yield is what is calculated while the actual yield is what you actually get in a chemical reaction.

What is actual and theoretical yield?

Actual yield is the quantity of a product that is obtained from a chemical reaction while the calculated or theoretical yield is the amount of product that could be obtained from a reaction if all of the reactant converts to product.

This depicts that theoretical yield is based on the limiting reactant. The relationship between actual yield and theoretical yield is used to calculate percent yield:

Percent yield = (actual yield ÷ theoretical yield) x 100%

The difference between actual yield and theoretical yield is illustrated above.

Learn more about actual and theoretical yield at: https://brainly.com/question/21925098

#SPJ1

an element compound has 82 protons, 82 electrons, and 123 neutrons. write its isotopic symbol including both the mass number and the atomic number.

Answers

With an atomic number of 82, the chemical element lead has 82 protons and 82 electrons in its atomic structure. Lead has the chemical symbol Pb.

Lead's neutron number and mass number Lead's usual isotopes have masses between 204 and 208. Lead's (pb) atomic number is 82. The quantity of protons in an element's nucleus is indicated by the element's atomic number. Only lead displays no Thomson effect in a metal. In other words, neither heat is emitted nor absorbed when an electrical current is transmitted through a sample of lead. Lead has a molecular weight of 207. Natural bluish-gray metal called lead may be found in trace levels in the earth's crust. Every area of our is filled with lead environment.

To know more about lead please click on the link brainly.com/question/27894549

#SPJ4

What is the total dose required for a 140 lb patient if the amount required is 28 mg/kg bodyweight? Given: 1.00 kg = 2.20 lb. Group of answer choices 1.8 mg 11 mg 28 mg 1.8 g 8.6 g 26)How many O atoms are in the formula unit GaO(NO2)2?

Answers

The many O atoms are in the formula unit GaO(NO2)2 as the total dose required are 63.5 kg.

You get lb and mg/k*g need to know mg

63.5 kg^ * 28 mg/k * g = 1778 mg1.8g is the next answerWhenNeed to convert lb to kg: 140 lb^ * 1kg / 2.205 * lb = 63.5kg.

The total dose required for a 140 lb patient if the amount required is 28 mg/kg bodyweight is 63.5kg.

Read more about atoms;

https://brainly.com/question/17545314

#SPJ4

consider the structure of the amino acid aspartic acid. indicate the hybridization about each interior atom.

Answers

They are known as the s p 3 hybrid orbitals because they are made up of ones atomic orbital and three p atomic orbitals. Aspartic acid's structural formula is C4H7NO4, as shown in the image below:

The concept of hypothetical orbitals mixing to produce new orbitals with the same energy is referred to as hybridization. The orbitals are shown with hybrid orbitals. Only sigma bonding makes use of hybrid orbitals. Hybridization is the process of combining atomic orbitals to create new hybridized orbitals. These recently hybridized orbitals are known as hybrid orbitals. The total number of atomic orbitals fused will always equal the total number of hybrid orbitals. For example, one s atomic orbital and three p atomic orbitals may combine.

To learn more about Amino acid Please click on the given link:

https://brainly.com/question/3535479

#SPJ4

Occaionally, you will ee a few white flower on a plant that normally ha purple flower. Explain what caue flower color and how ome white flower could appear on a purple-flowered plant

Answers

You will see a few white flowers on a plant that normally has purple flowers due to mutations.

Flower color is determined by pigments in the flower petals. The pigments responsible for the purple flower color are anthocyanins. A mutation in the genetic code responsible for producing anthocyanins could cause some of the petals to be white.

If this mutation is inheritable, then it could be passed down to future generations, resulting in some white flowers appearing on a plant that normally has purple flowers.

For more questions like Flower color  click the link below:

https://brainly.com/question/30007323

#SPJ4

the basic units of matter, the smallest units that maintain the chemical properties of an element, are called a. atoms. b. lipids. c. compounds. d. molecules.

Answers

The correct answer for the definition described is atoms. Please give brainliest I need five more.
Other Questions
MEASUREMENT Naming components of the scientific method In the table below you will find three descriptions of scientists engaging in activities that are part of the scientific method What are the missing words? description missing word? Dmitri discovers that the known chemica elements can be arranged in pattern of columns and rows_ with elements in the same column behaving similarly. But there is no element at certain place in the pattern and Dmitri proposes the that an unknown ement fits into that spot _ and that it will have properties similar to the elements above and below it in the pattern John sets up an in which he reacts measured amount of carbon with various measured amounts of oxygen_ and takes note of whether compound forms and weighs how much of each lement is consumed forming it Wolfgang develops about the arrangement of elements in the Periodic Table_ based on some ideas about how ectrons are arranged in the different atoms of different elements_ Using equations he develops, he is able to predict the exact arrangement of electrons in many atoms and from there predict why they are where they are in the Periodic Table. in addition to a base salary, the pay package for a manager sent to work in a foreign country would typically include . (select all that apply) a textbook publisher is in monopolistic competition. if the firm spends nothing on advertising, it can sell no books at $100 a book, but for each $10 cut in price, the quantity of books it can sell increases by 20 books a day. the firm's total fixed cost is $2,400 a day. its average variable cost and marginal cost is a constant $20 per book. if the firm spends $1,200 a day on advertising, it can increase the quantity of books sold at each price by 50 percent. compared to the situation if it does not advertise, if the firm advertises, the profit-maximizing price Extended warranties are service contracts that are not actually warranties b/c it is sold separately at an extra cost. The warranty is provided by the manufacturer. The extended warranty is provided by the? Please help!! And explain the work you did!! 60 points and brainliest!3x-12x+27= 0Distinguish the discriminant and number of solutions for the equation. Show your work and explain the steps youused to solve. Consider the broadcasting circuit for an AM radio station which broadcasts at a frequency of 1400 kHz. The free electrons in such a circuit are moving back and forth in simple harmonic motion. (a) How long does it take for the free electrons in this circuit to go back and forth once? Give your answer in microseconds. s (b) Assuming the average speed of the free electrons is 100 m/s, what is the range of motion of the electrons as they go back and forth in the wires of the circuit. (HINT: As a free electron goes back and forth, it travels its full range every half cycle.) Give your answer in nanometers. nm (c) What is the wavelength of the electromagnetic radio waves emitted by this broadcasting circuit? Give your answer in meters. m You buy the following from Amazon:25 flash drives for $10 eachWhat is the Subtotal: $Today only they are 25% off, how much do you save: $What is the new Subtotal: $Sales tax is 4%: $IWhat is the total: $ A _____________ lists information about the target market such as age, income level, ethnic background, occupation, attitudes, lifestyle and geographic residence.answer choicesO ProductO Target MarketO Mass MarketO Customer Profile in a triangle abc AB=12, AC=14 and angle BAC=68 find angles and side The Sherman Act, FTC Act, and the Food and Drug Act were all laws passed by Congress in an effort to regulate certain activities and practices in the economy. These laws were passed during the ___________ phase of government regulation.consumer protection What is the average speed of the dog if its goes 40 meter in 8 second Which of the following is attributed to the results of the above legal case?the federal government may amend state laws"separate but equal" services for African-Americans and Whitesimmigration to the United States may be restricted by state lawsO discrimination based on skin color is outlawed What does Jesus say about hope? How does Lulu connect to the Life as a Hunter Aqueous solutions of the following reactants are mixed. Calculate the concentration in mol/L) of calcium ions in solution after the reaction has gone to completion. 75.0 mL of 1.50 M AgNO, are mixed with 75.0 mL of 2.1 M Cacly DO NOT include units in your answer. If you round during your calculation, be sure to keep at least four (4) decimal places. Report your answer to two (2) decimal places. Answer: Calculate the mass of precipitate formed (in grams) when aqueous solutions of the following reactants are mixed. Assume that the reaction goes to completion. 79 mL of 1.50 M AgNO3 are mixed with 75.0 mL of 1.00 M CaCl, Do NOT include units in your answer. If you round during your calculation, be sure to keep at least four (4) decimal places. Report your answer to two (2) decimal places. Answer: What to do on Christmas morning? She abandons the house in which she is not treated according to her merits.Which conclusion is best supported by the information in the sentence?A Cats expect to be respected by their owners.B It can be difficult to find a cat after it runs away.C Many people are unable to care for cats properly.D Cats often have several owners throughout their lives. Type the correct answer in each box. Use numerals instead of words.If x>0, what values of c and d make the equations true? Equation A 448 x=8 x 7 x Equation B 576 x=4 x 9 xIn equation A, c isIn equation B, d is History question and I need it right now in the general formulation of fourier's law (applicable to any geometry), what are the vector and scalar quantities? why is there a minus sign on the right-hand side of the equation?