Answer:
Phosphorus, sulphur and chlorine have 5, 6 and 7 valence electrons respectively. They accept 3, 2 and 1 electrons respectively. It is easier to accept 1 electron than 2 or 2 electrons than 3. Hence, phosphorus is least reactive followed by sulphur and chlorine which is most reactive.
Explanation:
how many bonded atoms in borane (BH3)?
Answer: In this case, there are a total of 4 atoms (1 boron atom and 3 hydrogen atoms) bonded together in the molecule.
Explanation: Borane is a chemical compound that contains one boron atom bonded to three hydrogen atoms. The chemical formula for borane is BH3, indicating that it contains one boron atom bonded to three hydrogen atoms. Borane is a molecule, which means it is composed of two or more atoms bonded together chemically. In this case, there are a total of 4 atoms (1 boron atom and 3 hydrogen atoms) bonded together in the molecule.
n a molecule of nitrogen, the two nitrogen atoms are joined by a triple covalent bond. how many dots represent this bond in the electron dot formula for the molecule?
In a nitrogen molecule, a triple covalent bond connects the two nitrogen atoms. The formation of 3 bonds and 6 electron dots follows.
A non-metal, nitrogen is.The outer shell of an atom of nitrogen contains five electrons.The periodic table's group 5 includes nitrogen.A nitrogen molecule is created when two nitrogen atoms share three electrons and establish three covalent connections (N2).The electrons in the nitrogen molecule are pooled to create covalent bonds. Since there are 3 covalent links between the nitrogen atoms, there will be 6 shared electrons. Each covalent bond is made up of 2 shared electrons.
To know more about covalent bond please click on the link brainly.com/question/19382448
#SPJ4
- Which of the following substances exist in aqueous solutions in the form of molecules? .... A. C6H12O6 and C₂H5OH B. C₂H5OH and K3PO4 C. CH3COONA, C6H12O6 and K3PO4 D. CH3COONA, C6H12O6 and C₂H5OH
Answer:
Therefore, the correct answer is D: CH3COONA, C6H12O6, and C₂H5OH all exist in aqueous solutions in the form of molecules.
Explanation:
All of the substances listed exist in aqueous solutions in the form of molecules.
Aqueous solutions are solutions in which the solvent is water. Substances in aqueous solutions can exist as molecules, ions, or a combination of both.
C6H12O6, also known as glucose, exists as a molecule in an aqueous solution.
C₂H5OH, also known as ethanol, exists as a molecule in an aqueous solution.
K3PO4, also known as potassium phosphate, exists as ions in an aqueous solution. The potassium cation (K+) and phosphate anion (PO4^3-) are separate ions in solution.
CH3COONa, also known as sodium acetate, exists as ions in an aqueous solution. The sodium cation (Na+) and acetate anion (CH3COO^-) are separate ions in solution.
what is the identity of the unknown white solid? what is the identity of the unknown white solid? barium chloride calcium carbonate magnesium chloride
According to the claim, the substance in question is barium chloride, also known as BaCl₂.
Why is solid so crucial?For the purpose of overcoming these unfavorable design patterns, the SOLID tenets were created. Reducing dependencies allows engineers to alter one component of software without affecting others, which is the main objective of the SOLID principles. They are also meant to make designs simpler to comprehend, update, and expand.
A solid thing is what?A solid is distinguished by its rigidity and tolerance to external forces. A solid substance, unlike a liquid, doesn't quite flow to conform to the form of its containers or, like a gas, expand to cover the entire space.
To know more about Solid visit:
https://brainly.com/question/225975
#SPJ4
The complete question is-
You are presented with a white solid and told that due to carless labeling it is not clear if the substance is barium chloride, lead chloride or zinc chloride. When you transfer the solid to a beaker and add water the solid dissolves to give a clear solution. Next a Na2SO4 (aq) solution is added and a white precipitate forms. What is the identity of the unknown white solid?
a). BaCl₂
b). CaCO₃
c). MgCl₂
if 5.3 g of gallium reactions with 5.3 g of oxygen according to the following reaction, how many grams of gallium oxide can be produced?
If 5.3 g of gallium reactions with 5.3 g of oxygen there's 7.5g gallium oxide can be produced.
The grams of gallium oxide can be calculate as follows:
The balance aquation of reaction gallium and oxygen is
4Ga + 3O₂ → 2Ga₂O₃
First we should calculate the moles of each compound
Number of moles of Ga = 5.3 g / 69.7 g/mol = 0.08 mole
Number of moles of O₂ = 5.3 g / 16 g/mol = 0.33 mole
According to the balanced reaction:
4 moles of Ga reacted with 3 moles of O₂
then we used unitary method, so
0.08 moles of Ga will require 0.08 * 3 / 4 = 0.06 moles of O₂
But we knew that there's 0.33 moles of oxygen. This implies that oxygen gas is in excess, and that gallium completely reacted so,
4 moles of Ga produce 2 moles of Ga₂O₃
0.08 moles of Ga will produce 0.08 * 2 / 4 = 0.04 moles of Ga₂O₃
Mass of Ga₂O₃ = number of moles * molar mass
Molar mass of Ga₂O₃ = 2(69.7) + 3(16) = 187.4g/mol
Mass of Ga₂O₃ = 0.04 x 187.4 = 7.5g
Learn more about Number of moles here:
brainly.com/question/13314627
#SPJ4
What element has 7 valence and 3 energy levels and would use neon in the noble gas configuration?
Which is the correct statement regarding the relative Rf values of the starting methyl benzoate vs the product, methyl m-nitrobenzoate on a silica gel TLC plate? a. The product has a lower Rf value on a silica gel TLC plate because it is more polar than the starting methyl benzoate. b. The product has a lower Rf value on a silica gel TLC plate because it is less polar than the starting methyl benzoate. c. The product has a higher Rf value on a silica gel TLC plate because it is less polar than the starting methyl benzoate. d. The product has a higher Rf value on a silica gel TLC plate because it is more polar than the starting methyl benzoate.
The correct statement regarding the relative Rf values of the starting methyl benzoate vs the product, methyl m-nitrobenzoate on a silica gel TLC plate is (a) the product has a lower Rf value on silica gel TLC plate because it is more polar than starting material methyl benzoate.
There are many pores in silica gel, each of which can hold water; as is well known, water carries a polar charge. So we may say that the silica gel that serves as our stationary phase is polar. Because "like dissolves like" in chemistry, polar compounds interact with other polar substances. If there is a greater interaction, the Rf value will also be lower. Rf value is the molecular distance on TLC plate. Since the nitro group in this example is polar, it will interact with the water in the silica gel and as a result, will travel less distance, resulting in a lower Rf value than the methyl benzoate, which does not connect with the water in the silica gel because it lacks polar groups and therefore runs more quickly and covers a greater distance, leading to a higher Rf. So option (a) is the right option.
You can also learn about Rf value from the following question:
https://brainly.com/question/17132198
#SPJ4
indicate which aqueous solution has the highest boiling point. question 6 options: 0.1 m libr 0.1 m nh4no3 0.2 m koh 0.2 m c6h12o6 0.2 m na2co3
carbon tetrachloride has the highest boiling point.
Carbon tetrachloride is also known by many other names (such as tetrachloromethane) by IUPAC name.
The boiling point elevation of a liquid or a compound is defined as the boiling point of a liquid that is that will be higher when some other compound is added. It means that the solution has a higher boiling point than the solvent.
When a nonvolatile solute is added to a pure solvent like water, it results in the highest boiling point elevation.
Carbon tetrachloride, Kb = 5.03°C/m shows the highest boiling point elevation when it is used to make a 0.10 m non - electrolyte solution.
To know more about boiling point:
https://brainly.com/question/28203474
#SPJ4
What is the electrical charge of a proton in coulombs (C)?
The electrical charge of a proton is equal to 1.602 x 10^-19 coulombs (C).
The International System of Units uses this as the reference unit for electric charge (SI). The proton is a subatomic particle with a positive charge that is located in the nucleus of an atom. When compared to the electron, which is a negatively charged particle, its charge is the opposite in sign. Any subatomic particle's charge, whether it be that of a proton or another one, is a fundamental characteristic that cannot be altered.
The magnitude of the charge of the proton, and other subatomic particles, is defined by the electric charge of the electron, which is the elementary charge unit. The magnitude of the charge of the electron is 1.602 x 10^-19 C, and this value is used as the reference for the charge of other particles.
Read more about proton on:
https://brainly.com/question/4894505
#SPJ4
in the laboratory a student combines 35.8 ml of a 0.254 m calcium bromide solution with 12.4 ml of a 0.536 m iron(ii) bromide solution. what is the final concentration of bromide anion ?
The final concentration of bromide anion should be 0.6530 M.
Concentration of mixture (C) = ( n₁ × C₁ × V₁ + n₂ × C₂ × V₂ ) / (V₁+V₂)
where C₁ = Concentration of 1 component = 0.254 M
V₁ = volume of 1 component = 35.8 ml
C₂ = Concentration of other component = 0.536 M
V₂ = volume of other component = 12.4 ml
n₁ = number of particle from 1 molecule of 1st component
= 2 as 1 molecule of CaBr₂ has 2 atom of Br = 2
n₂ = number of particle from 1 molecule of 2nd component
= 2 as 1 molecule of FeBr₂ has 2 atom of Br = 2
Now, put the values in above equation;
C = ( n1 × C1 × V1 + n2 × C2 × V2 ) / (V1+V2)
C = ( 2 × 0.254 × 35.8 + 2 × 0.536 × 12.4 ) / ( 35.8 + 12.4 )
C = ( 18.1864 + 13.2928 ) / ( 48.2 )
C = ( 31.4792 ) / ( 48.2 )
C = 0.6530 M
So, The final concentration of Bromide anion is 0.6530 M.
To learn about Concentration, Here :
https://brainly.com/question/17170798?referrer=searchResults
#SPJ4
which part of this isotope symbol would change if you wrote the symbol for a different isotope of element x?
Place the atomic number subscript and mass number superscript to the left of the atomic symbol.
The chemical properties of an atom are determined by its atomic number and are represented by the symbol Z. The total number of nucleons in an atom is the atomic mass number. This value is represented by the symbol A.
Isotopes are members of a family of elements that have the same number of protons and a different number of neutrons. The number of protons in the nucleus determines the atomic number of an element on the periodic table. Isotopes are atoms of the same element that contain the same number of protons but different numbers of neutrons.
Learn more about Isotopes here:- https://brainly.com/question/14220416
#SPJ4
Based on the Lewis/electron dot representation
of the two atoms, predict the ratio of metal
cationic (+) atom to nonmetal anionic (-) atom in
Na
the compound.
A. 2:3
B. 1:3
C. 1:1
D. 1:2
The ratio of metal between cationic [+] atom and nonmetal anionic [-] atom in Na is 1:2 ,The correct option is D
What is lewis electron ?Lewis electron is a very simplified representation of the valence shell electrons in a molecule. It is used to show how the electrons are arranged around individual atoms in a molecule. Electrons are shown as dots or for bonding electrons as a line between the two atoms.
Therefore Lewis dot symbols allow us to predict the number of bonds atoms will form and therefore the stoichiometry of a compound. The Lewis structure of a compound also indicates the presence or absence of lone pairs of electrons.
Learn more about lewis electron here: brainly.com/question/30010470
#SPJ1
Why would the infant mortality rate influence a country’ claification a developed or developing?
According to our analysis, maternal mortality is the most important risk factor for infant mortality, followed by access to water and sanitation facilities.
What connection exists between infant mortality rates and a nation's level of development?One of the primary factors for the socioeconomic disparities that exist throughout these countries is the relationship between infant mortality and life expectancy, which results in higher newborn mortality rates and lower life expectancies at birth.
Why are developing nations' infant mortality rates so high?The absence of clean water, poor sanitation, malnutrition, endemic illnesses, inadequate or nonexistent primary health care facilities, and low health care spending are all conditions that are brought on by poverty, which is why infant mortality is clearly a function of poverty.
To know more about infant mortality rate visit :-
https://brainly.com/question/10211100
#SPJ4
Which of the following refers to the total kinetic and potential energy of all its particles?
Thermal energy is the sum of all the kinetic and potential energy of the particles in an object. The amount of thermal energy in an object increases with its temperature.
Because the constituent parts of a thing are always in motion, they possess kinetic energy. They also have potential energy because they are grouped in particular ways in various objects. Thermal energy refers to the combined kinetic and potential energy of all the particles in an object.
An thing has greater thermal energy when its temperature is higher.
The sum of the kinetic energies of all the atoms and molecules in an object makes up its thermal energy. It is a type of energy that is associated with heat and temperature.
Chemical, nuclear, and electrical reactions inside the body can provide thermal energy. It can also be produced or amplified by outside forces including thermal conduction, radiation, and mechanical motion.
To learn more about kinetic and potential energy Please click on the given link:
https://brainly.com/question/18963960
#SPJ4
Which is a saturated fatty acid?
Answer:
The saturated fatty acids are derived from both animal fats and plant oils. Rich sources of dietary saturated fatty acids include butter fat, meat fat, and tropical oils (palm oil, coconut oil, and palm kernel oil). Saturated fatty acids are straight-chain organic acids with an even number of carbon atoms (Table 2)
How do you think that metallic salts are used in fireworks?
in a first order decomposition, the constant is 0.00169 sec-1.what percentage of the compound has decomposed after 3.45 minutes?
The 32.9 % of the compound has decomposed after 3.45 minutes in the first order decomposition reaction.
In the first order, For decomposition we use the formula
A(t) = A0e-kt
where,
A0 is the initial amount of decomposed substance at t = 0,
k is the constant of decay
t is the time elapsed
A(t) is the amount after time t.
First order reaction is one in which the rate of reaction is proportional to the concentration of the reactant. It doubling the concentration doubles the reaction rate. A first-order reaction can have one or two reactants as in the case of the decomposition reaction. The percentage of decomposed compound left after a time t is, [A(t)], divided the the initial amount, [A0], time 100, or
[A(t)] = A/A0*100
A = A0e-kt
A/A0 = e-0.00299t, [k = 0.00299, divide both sides by A0]
A/A0 = e-0.00299*372, [t = 6.2 min*(60 sec/ 1 min) = 372 sec]
A/A0 = 32.9%
To learn more about First Order Decomposition Reaction please visit:
https://brainly.com/question/18802932
#SPJ4
a sample of gas has an initial volume of 12.7 l at a pressure of 1.03 atm .if the sample is compressed to a volume of 11.4 l , what is its pressure?
If the sample is compressed to a volume of 11.4L, the pressure is 1.147 atm.
What is pressure?"Pressure" is defined as the thrust (force) applied to a surface per area. The ratio of force to area is another way to describe it (over which the force is acting).
Formula and Pressure's Unit:
Thrust/Area = Pressure (P)
Pascals (Pa) is the SI unit. 1 Pa = 1N/m2
For instance, it is simpler to hammer a sharp pin than dull pin. This is due to the fact that sharp pin's end has a lower surface area than blunt pin. This causes the pressure to rise.
Types of Pressure:
Atmospheric PressureAbsolute PressureDifferential PressureGauge PressureCalculation:
We can find [tex]P_{2}[/tex] by using the formula for Boyle's law:
[tex]P_{1} V_{1} = P_{2} V_{2}[/tex]
Since we are finding another pressure:
[tex]P_{2} = \frac{P_{1}V_{1}}{V_{2}}[/tex]
From the question we get:
[tex]P_{2} = \frac{(1.03)(12.7 ) }{11.4 }[/tex]
[tex]P_{2} = 1.147[/tex]
Therefore the pressure is 1.147 atm.
To learn ore about pressure visit:
https://brainly.com/question/18915714
#SPJ4
How did the suspects make the silver coins look gold?
Silver coins have a small proportion of zinc which on heating come to the surface in the form of brass having yellow color resembling element of gold.
What is an element?An element is defined as a substance which cannot be broken down further into any other substance. Each element is made up of its own type of atom. Due to this reason all elements are different from one another.
The number of protons in the nucleus is the defining property of an element and is related to the atomic number.All atoms with same atomic number are atoms of same element.
Learn more about element,here:
https://brainly.com/question/13516179
#SPJ1
why do high pressures favor the formation of diamond from graphite? drag the terms on the left to the appropriate blanks on the right to complete the sentences.
At the high pressures favor the formation of diamond from graphite because according to the le chatelier principle if we increase the pressure the equilibrium will shifts to the higher density.
The synthetic diamond is formed the graphite at a very high temperature.
graphite ⇄ diamond
the density of the graphite = 2.2 g/cm³
the density of the diamond = 3.9 g/cm³
if we increase the pressure then the equilibrium will shifts to the low volume or the high density. here the density of the diamond is high than the graphite. so, equilibrium shifts towards the diamond. therefore is the condition for the graphite to convert in diamond.
To learn more diamond here
https://brainly.com/question/17185259
#SPJ4
Concentrated nitric acid has a molarity of 15.8 M. Determine the volume of nitric acid required to completely react with 1.00 g of copper.
The volume of 15.8 M concentrated nitric acid required to completely react with 1.00 g of copper would be 0.004 L or 4 mL.
Stoichiometric problemConcentrated nitric acid and copper react to produce hydrogen gas, nitrogen dioxide gas, and copper (II) nitrate according to the following equation:
[tex]Cu + 4HNO_3 --- > Cu(NO_3)_2 + 2H_2 +2NO_2[/tex]
The mole ratio of copper the nitric acid is 1:4.
I g of copper is equivalent to:
mole = mass/molar mass
= 1/64
= 0.016 mol
The equivalent mol of the nitric acid would be: 0.016 x 4 = 0.064 mol
Recall that molarity is the ratio of the number of moles of solutes and the volume of the solution in liters.
Thus, volume = mole/molarity.
Volume of 0.064 mol nitric acid = 0.064/15.8
= 0.004 liters
0.004 liters = 4 mL
Thus, the volume of the concentrated nitric acid that will be required to completely react with 1.00 grams of copper would be 0.004 liters or 4 mL.
More on stoichiometric problems can be found here: https://brainly.com/question/14465605
#SPJ1
14. B = Black fur, b = white fur, Show a punnett square for this cross: Bb x Bb, Give the genotypes and
phenotypes as probabilities.
Answer: the image below is the answer
Explanation:
Describe three steps that can be used to identify a material
Answer:
Decide what properties you want to check, test those properties, and compare the results to the materials
Explanation:
which type of process does a nuclear power plant use to produce electricity?
A. Nuclear Fusion
B. Nuclear Decay
C. Nuclear Fission
D. Combustion
Answer:
nuclear fission
Explanation:
nuclear fission creates the most energy, so its obvious a power plant would use the best option to create said energy.
Explain how magic numbers are related to nuclear stability.
In nuclear stability, there are seven magic numbers which are 2, 8, 20, 28, 50, 82, and 126.
What are magic numbers?A magic number can be described as a number of nucleons such that they are arranged into shells within the atomic nucleus. Atomic nuclei with a 'magic' number of protons or neutrons are much more stable than other simple nuclei.
The seven most recognized magic numbers are 2, 8, 20, 28, 50, 82, and 126. For protons. the elements helium, oxygen, calcium, tin, nickel, lead, and unbihexium, although 126 is known to be a magic number for neutrons.
Atomic nuclei containing such a magic number of nucleons exhibit a higher binding energy per nucleon.
The magic number shows the number of filled nuclear shells. They tend to recognize the isotopes that are much more stable as compared to other elements and show the energies of each nucleon.
Learn more about magic numbers, here:
https://brainly.com/question/17219425
#SPJ1
the most common type of regenerated fiber, which is derived from cellulose and is mostly plant in origin, is rayon.
The most common type of regenerated fiber, which is derived from cellulose and is mostly plant in origin, is rayon is True.
What is Rayon?A natural source of regenerated cellulose, such as wood and other associated agricultural products, is used to create rayon, a semi-synthetic material. Its molecules resemble those of cellulose. Viscose is another name for it. Viscose fibres and films come in a wide variety of types and grades. Some mimic the appearance and feel of organic materials including silk, wool, cotton, and linen. Artificial silk is a common name for the materials that resemble silk.
To know more about Rayon refer here
https://brainly.com/question/13923474#
#SPJ4
Complete Question
The most common type of regenerated fiber, which is derived from cellulose and is mostly plant in origin, is rayon.
True
False
Which two elements are most likely to form a covalent bond?
answer choices
C and Ca
P and F
Sr an S
Li and Cl
Al and I
propanol has a normal boiling point of 97.8°c. at 400 torr, it has a boiling point of 82.0°c. what is the heat of vaporization?
44.5 kJ/mol Propanol has a boiling point of 82.0°C when its typical boiling point is 97.8°C at 400 Torr.
What is the hexane vapour pressure at its typical boiling point?Hexane's typical boiling point is 342 K. Hexane has a 30.1 kJ/mol molar heat of vaporization. 1.23 atm is the atmospheric pressure.
Propanol typically boils at T1 = 97.8°C = 371.0 K. A pressure of P1 = 1 atm = 760 torr is referred to as "normal." Its boiling point at 400 torr (P2) is T2 = 82.0 °C / 355.2 K. Using the two point form of the Clausius-Clapeyron equation, we can determine the heat of vaporization (Hvap), which results in the heat of vaporization being 44.5 kJ/mol.
To know more about boiling point visit:-
https://brainly.com/question/2153588
#SPJ4
Match each Earth and space science discipline to its description.
geology
environmental science
astronomy
the study of the space around
Earth and within the universe,
including meteoroids and
galaxies that are trillions of
miles away
the study of Earth's rocky surface
to determine when and how
Earth was formed and how
its surface is changing
the study of the complex interactions
taking place between living organisms
and Earth's nonliving systems
What is the difference between stoichiometry and limiting reactant? How do you use the mole ratio and the balanced equation to calculate the amount of reactants or products in a chemical reaction?
The reaction stoichiometry can be used to calculate the exact amount of reactant required to react with another element. The limiting reagent is determined by the mole ratio rather than the masses of the reactants.
What is stoichiometry?Stoichiometry is the calculation of products and reactants in a chemical reaction. It is primarily concerned with numbers.
Stoichiometry is a fundamental concept in chemistry that allows us to use balanced chemical equations to calculate the amounts of reactants and products. We use ratios from the balanced equation here. In general, all reactions are determined by one factor: the amount of substance present.
The stoichiometric coefficient or stoichiometric number is the number of molecules involved in the reaction. When you look at any balanced reaction, you will notice that there are an equal number of elements on both sides of the equation. The stoichiometric coefficient is essentially the number that appears in front of atoms, molecules, or ions.
Learn more about Stoichiometry
https://brainly.com/question/14935523
#SPJ4