Answer:
i think the answer is b
Explanation:
The volume of a gas with an initial pressure of 380 mmHg atm increases from 5.0 L to 8.0 L. What is the final pressure of the gas, in atm, assuming no change in moles or temperature?
A) 238 atm
B) 2.4 atm
C) 0.31 atm
D) 0.80 atm
E) 8.0 atm
Answer:
0.31 atmExplanation:
The new pressure can be found by using the formula for Boyle's law which is
[tex]P_1V_1 = P_2V_2[/tex]
Since we are finding the new pressure
[tex]P_2 = \frac{P_1V_1}{V_2} \\[/tex]
From the question
760 mmHg = 1 atm
380 mmHg = 0.5 atm
We have
[tex]P_2 = \frac{0.5 \times 5}{8} \\ = 0.3125[/tex]
We have the final answer as
0.31 atmHope this helps you
what does the changing the Aperture do when taking a photo? *
4.What effect can you get from using a slow shutter speed? *
5.What effect can you create by using a quick shutter speed
Answer:
Slower shutter speeds like 1/60 second and slower cause a blurring effect. If you want to take a picture using a slow shutter speed, it is best to mount the camera on a tripod and use image stabilization (such as SteadyShot® technology) to reduce the chance of any unwanted camera movement.
The first big effect of it is motion blur. If your shutter speed is long, moving subjects in your photo will appear blurred along the direction of motion. ... If you use an especially fast shutter speed, you can eliminate motion even from fast-moving objects, like birds in flight, or cars driving past.
Explanation:
What is the mass of 8.8 x 10^22 of magnesium
Answer:
0.05
moles
Explanation:
In a mole of any substance, there exist
6.02⋅1023
units of that substance.
So here, we got:
3.01⋅1022Mg atoms⋅1mol6.02⋅1023M gatoms=0.05mol
If repeated measurements agree closely but differ widely from the
accepted value,
these measurements are
neither precise nor accurate.
accurate, but not precise.
both precise and accurate.
precise, but not accurate.
Answer:
precise but not accurate
Explanation:
precision is getting the same answer over and over, but not necessarily correct.
accuracy is getting the exact, or VERY close to exact, value
since the question states the repeated measurements agree closely it is saying it is precise, but when it says differ widely from accepted value it is saying NOT accurate.
Write the charge balance for an aqueous solution of arsenic acid, H3AsO4, in which the acid can dissociate to H2AsO24 , HAsO24 2, and AsO34 2. Look up the structure of arsenic acid in Appendix G and write the structure of HAsO24 2.
Answer:
Kindly check the explanation section.
Explanation:
When the Arsenic acid,H3AsO4 is put in water it dissociates to form or give out 1 proton, 2 protons or 3 protons that is 1H^+, 2H^+ and 3H^+. Check the equation showing the dissociation reactions as given below;
H3AsO4 ===========> H^+ + AsO4^-
H3AsO4 ===========> 2H^+ + AsO4^2-
H3AsO4 ===========> 3H^+ + AsO4^3-
Therefore, the total charge balance is given as:
[H^+] =[OH^-] + [ AsO4^-] + 2[ AsO4^2-] + 3[ AsO4^3-].
Kindly note that the [OH^-] is from water.
A radioactive element having and atomic number 82 and atomic mass 214 emits a beta particle. The resulting element is:______.
Answer:
[tex]\frac{214}{83} Bi[/tex]
Explanation:
In beta emission, a neutron is converted into a proton thereby reducing the neutron:proton (N/P) ratio.
When a beta emission occurs, the mass number remains the same while the nuclear charge increases by one unit. The daughter nucleus is found one place to the right of its parent in the periodic table.
The percent by mass of Ca in CaCl2 is equal to
1. (40/111) x 100
2. (111/40) x 100
3. (3/1) x 100
4. (1/3) x 100
Answer:
(40/111)×100Here is a bonus Answer✍️✍️Percent composition by elementElement Symbol Mass PercentChlorine Cl 63.888%Calcium Ca 36.112Mass percentage does not have any unit as numerator and denominator contains the same unit. The percent by mass of Ca in CaCl[tex]_2[/tex] is equal to (40/111) x 100. The correct option is option A.
What is percentage by mass?Mass percentage represents the the percentage of each element that is making a particular compound.
Mathematically,
Percentage of mass = (component’s mass ÷ total mass) x 100%
Atomic weight of different element of calcium chloride{ CaCl[tex]_2[/tex]} are
Ca = 40 ; Cl = 35
Total mass of Calcium element in calcium chloride = 40g/mol
Total mass of Chlorine atom in calcium chloride = 35× 2= 71g/mol
Total molar mass of calcium phosphate = 40 +71= 111g/mole
Percentage of calcium in calcium chloride =40÷111 = 36%
Therefore, the percent by mass of Ca in CaCl2 is equal to (40/111) x 100. The correct option is option A.
To learn more about mass percentage, here:
https://brainly.com/question/27429978
#SPJ2
How many molecules of glucose (C6H12O6,M=180.18g/mol) are contained in 144mL of 0.280 M glucose solution?
Volume of Glucose solution = 144 mL OR 0.144 L
Molarity of Glucose solution = 0.280 M
Number of moles of Glucose in the solution:From the definition of Molarity, we know that:
Molarity = number of moles / volume(in L)
in this equation, multiplying both sides by Volume, we get:
number of moles = Molarity*Volume(in L)
replacing the variables
Number of moles = 0.280*(0.144L)
Number of moles = 0.04
Number of Molecules in the solution:
We know that:
Number of molecules = Number of Moles * Avogadro's number
Number of molecules = 0.04 * 6.022 * 10²³
Number of molecules = 0.24088 * 10²³
Number of molecules = 2.4088 * 10²²
Therefore, there are 2.4088 * 10²² molecules of Glucose in the given solution
Writing Chemical Equations
Write and balance the equation showing the reaction between lead (II) sulfide and carbon monoxide to form lead metal and carbon dioxide.
Answer:Gaseous C4H8 + oxygen gas ---> carbon dioxide + water
C4H8(g) + 6O2(g) ---> 4CO2(g) + 4H2O(g)
Not the one u want but its similar so u can get an idea of what the one u want is like
Why is it important to know which category of microorganism has caused an infection?
Select one:
a. Treatment depends on which kind of organism caused the infection.
b. Probiotic infections can actually worsen some conditions.
c. Some infections can indicate cancer.
d. Some types of infections are highly contagious.
PLEASE ANSWER QUICKLY
Answer:
A
Explanation:
Shifts in the rock layer locations cannot account for gaps in the rock record
true or false
Answer: That would be false because it is the contact between two layers representing a gap in the geologic record, usually from the erosion of the layers which would normally be expected to appear.
Explanation:
Have a good day
I hope this helps if not sorry :(
Stay motivated
Explain how kingdoms and domains are different.
Answer: A domain is a taxonomic category above the kingdom level. The three domains are: Bacteria, Archaea, and Eukarya, which are the major categories of life. Essentially, domains are superkingdoms. A kingdom is a taxonomic group that contains one or more phyla. The four traditional kingdoms of Eukarya include: Protista, Fungi, Plantae, and Animalia.
Explanation:
Answer:
A domain is a taxonomic category above the kingdom level. The three domains are: Bacteria, Archaea, and Eukarya, which are the major categories of life. ... A kingdom is a taxonomic group that contains one or more phyla. The four traditional kingdoms of Eukarya include: Protista, Fungi, Plantae, and Animalia.
Explanation:
hope you get a good grade lol I'm in FLVS and this was one of my questions :D
Answer please thanks
Answer:
7. A. ee
8. Genotypes in which the dominant gene must show: Both A & B
9. Genotypes in which the recessive genes must show: A. aa
CAN YOU PLZ HELP ME ITS TIMED BRAINLIEST!
ONLY ANSWER IF YOU KNOW THE ANSWER PLZ!
The diagram shows two chromosomes paired up.
Which process is being shown?
sexual reproduction
independent assortment
crossing over
chromosome separation
Answer:
the sexual reproduction
Explanation:
Please help !!!
The atomic number of sodium is 11. How many neutrons does an isotope with a mass number of 22 have ?
Answer:
11
Explanation:
You have 3.00 L of a 3.12 M solution of NaCl(aq) called solution A. You also have 2.00 L of a 2.00 M solution of AgNO3(aq) called solution B. You mix these solutions together, making solution C.
Calculate the concentration (in M) of Ag+ ions in solution C.
Answer:
[tex]M=0.8M[/tex]
Explanation:
Hello!
In this case, since the presence of silver ions is in AgNO3 only, we can compute their moles by using the volume and concentration of the corresponding salt:
[tex]n_{Ag^+}=2.00L*2.00\frac{mol}{L}=4molAg^+[/tex]
Next, since the total volume of solution C is 5.00 L, the required concentration of silver ions turn out:
[tex]M=\frac{4.00mol}{5L} =0.8M[/tex]
Best regards!
I need to know the weighted average please!
Answer:
63.5456 amu
Explanation:
[tex]0.6917*62.9296+0.3083*64.9278= 63.5456\ amu[/tex]
Help lol please lol thank you :)
Answer:
45
Explanation:
Answer:
45 lol
Explanation:
is na2o a element or compound
Answer:
Its a compound :PP
Explanation:
have a good day
Answer:
Compound
Explanation:
In metallic bonding, the electrons A. are unable to move. B. are shared between two single atoms. C. are given to one atom by another atom. D. are in a "sea" around the protons of all the metal atoms.
Answer: I think it’s A.
Explanation:
Tell me if it’s wrong sorry, I am only in middle school level science.
FeO+ PdF2 ---> FeF2+PdO balance please worth 50 points
Answer: FeO
Explanation:
Answer:
This is not worth 50 points liar
Explanation:
35. Which subatomic particle has almost no mass relative to the others: the proton, the neutron or the electron?
Answer:
electron
Explanation:
it has very little mass
What do you think is the common link between each of the phenomena shown?
Answer:
sounds wave
Explanation:
From alarm, microwave, laser, TV, water waves and a musical instrument, everything release sounds.
(Not the same)
If it convinced you please add this in the brainlist
What is the molar mass of h2
Answer:
The answer is one
Explanation:
I will just type any rubbish here bcuz my answer should be more than 20 words..... Just know the answer is 1
Use scientific notation to express the number 355000 to:
1) one significant figure
2) two significant figures
3) three significant figures
4) four significant figures
5) six significant figures
Answer:
1) 4*10^5
2) 3.6*10^5
3) 3.55*10^5
4) 3.550*10^5
5) 3.55000*10^5
Explanation:
1) 4 x [tex]10^5[/tex]
2) 3.6 x [tex]10^5[/tex]
3) 3.55 x [tex]10^5[/tex]
4) 3.550 x [tex]10^5[/tex]
5) 3.55000 x [tex]10^5[/tex]
What is scientific notation?A number is written in scientific notation when there is a number greater than or equal to 1 1 11 but less than 10 10 1010 multiplied by a power of 10 10.
Significant figures are the number of digits in a value, often a measurement, that contributes to the degree of accuracy of the value.
1) 4 x [tex]10^5[/tex]
2) 3.6 x [tex]10^5[/tex]
3) 3.55 x [tex]10^5[/tex]
4) 3.550 x [tex]10^5[/tex]
5) 3.55000 x [tex]10^5[/tex]
Learn more about scientific notation here:
https://brainly.com/question/18073768
#SPJ2
List three things, other than the name, symbol, atomic number, and average atomic mass, you can discover about an element using the periodic table in Figure 6.9.
Answer: State of matter, Subcategory in the metal-metalloid-nonmetal trend, and electrons per shell.
Explanation:
Atoms are the
piece of an
Answer:
Our current model of the atom can be broken down into three constituents parts – protons, neutron, and electrons. Each of these parts has an associated charge, with protons carrying a positive charge, electrons having a negative charge, and neutrons possessing no net charge.
Which one of the following
statements about the following
reaction is false?
CH4(g) + 202(g) → CO2(g) +
2H2O(g)
Answer:
5
Explanation:
Using the data below, calculate the enthalpy for the combustion of C to CO
C(s) + O2(g)--> CO2 (g) ΔH1 = -393.5 kJ
CO(g) + 1/2O2(g) -->CO2(g) ΔH2= -283.0kJ
Target: C(s) + 1/2O2(g) --> CO(g) ΔH3=??
Group of answer choices
Answer:
ΔH3 = -110.5 kJ.
Explanation:
Hello!
In this case, by using the Hess Law, we can manipulate the given equation to obtain the combustion of C to CO as shown below:
C(s) + 1/2O2(g) --> CO(g)
Thus, by letting the first reaction to be unchanged:
C(s) + O2(g)--> CO2 (g) ; ΔH1 = -393.5 kJ
And the second one inverted:
CO2(g) --> CO(g) + 1/2O2(g) ; ΔH2= 283.0kJ
If we add them, we obtain:
C(s) + O2(g) + CO2(g) --> CO(g) + CO2 (g) + 1/2O2(g)
Whereas CO2 can be cancelled out and O2 subtracted:
C(s) + 1/2O2(g) --> CO(g)
Therefore, the required enthalpy of reaction is:
ΔH3 = -393.5 kJ + 283.0kJ
ΔH3 = -110.5 kJ
Best regards!
How many significant figures
are in this number?
21.00
Answer:
4
Explanation:
the significant figures are 2 1 0 0