Answer:
If we compare 270 J and 2 380.5 J the higher is 2 380.5 J which is A 9 kg object traveling at 23 m/s
Explanation:
A 60 kg object traveling at 3 m/s
Given:
m = 60 kg
v = 3 m/s
Unknown:
KE or kinetic energy
Formula and solution:
KE = 1/2 mv²
KE = 1/2 (60kg) (3m/s)²
KE = (30kg) (9m²/s²)
Final Answer:
KE = 270 kg·m²/s² or simplify as 270 J
A 9 kg object traveling at 23 m/s
Given:
m = 9kg
v = 23m/s
Unknown:
KE or kinetic energy
Formula and solution:
KE = 1/2 mv²
KE = 1/2 (9kg) (23m/s)²
KE = (4.5kg) (529m²/s²)
Final Answer:
KE = 2 380.5 kg·m²/s² or simplify as 2 380.5 J
The two factors that determine velocity are
A: speed and direction
B: direction and speed
C: position and rate
D:distance and mass
PLEASE HELP ME
Answer:
A: speed and direction
What is the direction of the net force that acts on an object undergoing uniform circular motion?
A. The direction of the force is opposite to the object's motion.
B. The direction of the force is the same as the object's motion.
C. The direction of the force is away from the center ot the object's circular path.
D. The direction of the force is toward the center of the object's circular path.
Answer B. the direction of force is the same
1. Given a list of atomic model descriptions:
A: electron shells outside a central nucleus
B: hard, indivisible sphere
C: mostly empty space
Which list of atomic model descriptions represents
the order of historical development from the earliest
to most recent?
A) A, B, CBA, C, B
CB, C, A D) B, A, C
Answer: A: electron shells outside a central nucleus
B: hard, indivisible sphere
C: mostly empty space
Which list of atomic model descriptions represents
the order of historical development from the earliest
to most recent?
Explanation:
3
Atomic models have been proposed throughout history describing the possible arrangements of different particles inside the atoms.
The very first model for atom was given by Dalton known as the solid sphere model that was an indivisible hard sphere.The model given by Rutherford that was known as nuclear model mostly included empty space.The model given by Shrodinger showed electron shells as being outside the central nucleus.Thus, the correct order of atom model is B C A. Hence, the correct answer is option C.
https://brainly.com/question/1596638
a car moving on a road passes by kilometer 218 at 10:15 am and milestone 236 at 10:30 am. determine an average scalar speed in km / h over this stretch.
Answer:
v?
Explanation:
v = ∆s / ∆t
v =?
∆s = 236 - 218 = 18km
=t = 10: 30 - 10:15 = 15 minutes to hour 15/60 = 0.25h
v = 18 / 0.25
v = 72km / h
speed of 72km / h
A boy is going down a slide. As he reaches the bottom, friction causes him to slow down and stop. Which one of Newton's laws is this?
2nd law
3rd law
1st law
4th law
The given condition satisfies the Newton's First Law of motion. Hence, option (C) is correct.
Given data:
A boy slides down and friction causes him to slow down and stop.
In the given problem, when boy was sliding down, then he was in the state of motion, such that the when the he reaches at the bottom of hill, the friction plays the role of external agent to stop its motion.
This shows that the first law of motion is clearly followed which says that, "If an object is in motion, then it will be in motion until and unless any external force is applied on it". This is also known as law of inertia.
Thus, we can conclude that the given condition satisfies the Newton's First Law of motion. Hence, option (C) is correct.
Learn more about the Newton's first law of motion here:
https://brainly.com/question/974124
All students perceive poor grades as disappointing.
Please select the best answer from the choices provided
Т
F
Answer:
False
Explanation:
Which of the following is an example of a properly written testable hypothesis? *
A people should taste this new health food and see whether it makes them stronger
B When dog owners don't feed their puppies Brand A food, the puppies do not grow properly
C If Frederico had added the leaves to the compost pile last year, he wouldn't have to organic fertilizer
D if it is dark, then an owl will find a mouse by the sound the mouse makes
Answer:
D. if it is dark, then an owl will find a mouse by the sound the mouse makes
Which characteristics can be determined given only the information above? 1.) luster 2.) streak 3.) crystal size 4.) crystal structure PLEASE HELP ME!!!!!!
SCIENCE
What is a non-example of Newton's 3rd law of motion?
Answer:
Unbalanced forces are not examples of Newton's third law because not all opposite reactions are unbalanced forces.
Explanation:
Which process is involved in the formation of a galaxy
Answer:
SUN
Explanation:
EARTH
Which of the following individuals would be best classified as being in identity diffusion?
A.
Pauline isn’t interested in politics because she’d like to enjoy being a kid longer.
B.
Richard has decided to become a Democrat after much soul searching.
C.
Maria has adopted her parents’ identification as Protestant without considering other options.
D.
Pierce is trying many different identities but hasn’t decided on one yet.
Answer: C
Explanation: after reading it over and over shes the most reasonable. But I could be wrong so be cautious.
According to the question, Maria would be best classified as being in identity diffusion. So, option (C) is correct answer.
What is identity diffusion?
People who are experiencing identity diffusion haven't chosen an ideological or occupational route for the future and aren't making any effort to do so. Identity diffusion occurs during adolescence, a time when individuals are attempting to define their identities, but it can also last into adulthood.
When a person isn't actively forming an identity or committing to one, identity diffusion happens.Many people go through a phase of identity diffusion in their early years of adolescence or in childhood, which they eventually grow out of. Long-term identity diffusion is yet conceivable.James Marcia created four "identity statuses" in the 1960s, and identity diffusion is one of them. These identity statuses are a continuation of Erik Erikson's research on the formation of teenage identities.In the question, Maria has adopted her parents’ identification as Protestant without considering other options. She haven't chosen an ideological or occupational route for the future and aren't making any effort to do so. So, Maria would be best classified as being in identity diffusion.
To learn more about identity diffusion, refer the link:
https://brainly.com/question/4412284
#SPJ6
1. If all other things remain equal, which of the following changes to a closed circuit would result in increased resistance to the flow of electric current?
Correct Answer: A) Reducing the thickness of the conductor
B) Replacing the conductor with a more conductive material
Incorrect Response: C) Reducing the length of the conductor
D) Reducing the temperature of the conductor
2. What term refers to producing magnetism by placing a body within a magnetic field?
A) Polarization
B) Natural magnetism
C) Incorrect Response: Artificial magnetism
D) Correct Answer: Induced magnetism
3. What two things must exist for an electric current to be produced?
A) A negatively charged electrode and a positively charged electrode
B) Incorrect Response: A pair of highly conductive materials and a conducting path between them
C) Correct Answer: An electric potential between two bodies and a conducting path joining the bodies
D) A source of voltage and an open circuit
4. If all other things remain equal, which of the following changes to a closed circuit would result in increased resistance to the flow of electric current?
A) Correct Answer: Reducing the thickness of the conductor
B) Replacing the conductor with a more conductive material
C) Incorrect Response: Reducing the length of the conductor
D) Reducing the temperature of the conductor
5. Three components in a parallel circuit have individual resistances of r1, r2, and r3. What formula can you use to determine the total resistance of the circuit?
A) 1/R= r1 + r2 + r3
B) Incorrect Response: R= 1/r1 + 1/r2 + 1/r3
C) Correct Answer: 1/R= 1/r1 + 1/r2 + 1/r3
D) R= r1 + r2 + r3
6. Which of the following materials commonly used in electronic devices is classified as a semiconductor?
A) Correct Answer: Silicon
B) Incorrect Response: Copper
C) Glass
D) Plastic
7. Which of the following explains why your hair stands on end when you rub it with a balloon?
A) The balloon creates friction, which sticks your hair to it.
B) Correct Answer: Electrons from your hair jump to the balloon, causing it to become negatively charged on one side.
C) Incorrect Response: Protons from your hair jump to the balloon, causing it to become negatively charged on one side.
D) Protons from the balloon jump to your hair, causing it to become negatively charged.
Answer:
1. A) Reducing the thickness of the conductor would result in increased resistance to the flow of electric current
2. D) Induced magnetism produces magnetism by placing a body within a magnetic field.
3. C) For an electric current to be produced, an electric potential between two bodies and a conducting path joining the bodies.
4. YOU REPEATED QUESTION 1&4.
5. C) 1/R= 1/r1 + 1/r2 + 1/r3
6. A) Silicon, commonly used in electronic devices, is classified as a semiconductor
7. B) Electrons from your hair jump to the balloon, causing it to become negatively charged on one side.
Explanation:
7. The balloon “steals” electrons from your hair, which causes one side of the balloon to become negatively charged. Since your hair lost electrons, it now has a partial positive charge. Opposite charges of static electric attract, causing them to stick together.
6. For a material to be considered a semiconductor, it must have a resistance to electric current that's too high to be considered a conductor but too low to be considered an insulator. Three common semiconductors used in electronic devices are silicon, germanium, and selenium.
5. If three components are arranged to form a parallel circuit, and the individual resistance of these components are r1, r2, and r3 respectively, the formula for finding the total resistance R is: 1/R= 1/r1 + 1/r2 + 1/r3.
4. YOU REPEATED QUESTIONS 1 & 4.
3. For an electric current to be produced, there must be an electric potential between two bodies and a conducting path joining the bodies. Two oppositely charged bodies won't produce a current unless there's a conduction path for the electrons to travel through.
2. Placing a piece of metal such as an iron bar into a magnetic field, thereby causing the bar to become magnetized, is known as induced magnetism. Typically, an object that has been magnetized in this manner will lose its magnetic properties quickly when removed from the magnetic field.
1. The resistance to electric current increases as the cross-section of the conductor is reduced, as the conductor is lengthened, and as the conductor is heated. Replacing the conductor with a less-conductive material increases the resistance as well.
1 & 4. A) Reducing the thickness of the conductor would result in increased resistance to the flow of electric current.
2. D) Induced magnetism produces magnetism by placing a body within a magnetic field.
3. C) The two things must exist for an electric current to be produced is an electric potential between two bodies and a conducting path joining the bodies.
5. C) The formula used to determine the total resistance of the circuit is 1/R= 1/r1 + 1/r2 + 1/r3
6. A) Silicon, commonly used in electronic devices, is classified as a semiconductor
7. B) Electrons from your hair jump to the balloon, causing it to become negatively charged on one side.
What is electric current?The stream of positive charges which flow from the positive terminal to the negative terminal of the battery attached in a circuit.
1 & 4. An electric potential between two bodies and a conducting path joining the bodies is required to produce current. If all other things remain equal, changes to a closed circuit that would result in increased resistance to the flow of electric current is reducing the thickness of the conductor.
The correct option is A.
2. If an iron bar placed into a magnetic field, it become magnetized, also known as induced magnetism. The term refers to producing magnetism by placing a body within a magnetic field is induced magnetism.
The correct option is D.
3. The two things must exist for an electric current to be produced is an electric potential between two bodies and a conducting path joining the bodies.
The correct option is C.
5. If three components are arranged to form a parallel circuit, and the individual resistance of these components are r1, r2, and r3 respectively, the formula for finding the equivalent resistance R is: 1/R= 1/r1 + 1/r2 + 1/r3.
The correct option is C.
6. A semiconductor must have a resistance to electric current . Three common semiconductors used in electronic devices are silicon, germanium, and selenium.
The correct option is A.
7. The balloon transfers electrons from your hair, which causes one side to become negatively charged. Hair lost electrons, it has a partial positive charge. Opposite charges of static electric attract, causing it to stick together. So, hair stands on end when you rub it with a balloon because electrons from your hair jump to the balloon, causing it to become negatively charged on one side.
The correct option is B.
Learn more about electric current.
https://brainly.com/question/2264542
#SPJ5
1.Which of the following are examples of projectile motion
a. a airplane taking off
b.a tennis ball lobbed over a net
c. a plastic disk sailing across a lawn
d.a hawk diving to catch a mouse
e. a parachutist drifting to Earth
f. a frog jumping from land into the water
Answer:
b and f
Explanation:
Following are examples of projectile motion: a. A tennis ball lobbed over a net c. A plastic disk sailing across a lawn d. A hawk diving to catch a mouse e. A parachutist drifting to Earth. The correct options are A, C, D and E.
Projectile motion refers to the motion of an object that is launched into the air and moves along a curved trajectory under the influence of gravity alone, with no other forces acting horizontally. In projectile motion, the object follows a path called a parabola.
In the given options, a tennis ball being lobbed over a net, a plastic disk sailing across a lawn, a hawk diving to catch a mouse, and a parachutist drifting to Earth all demonstrate projectile motion. In each case, the objects are initially launched or propelled into the air and subsequently follow a curved path influenced primarily by gravity. The trajectory of these objects can be described by a parabolic shape, which is a characteristic of projectile motion.
The correct options are A, C, D and E.
To know more about projectile motion, click here.
https://brainly.com/question/12860905
#SPJ2
A rock is kicked horizontally off a dock into the bay 3
times with a higher initial velocity each time as shown to the right. Which of the following statements is true regarding
these scenarios? AND WHY?
(a) The rock takes the longest time to hit the water in
case 3
(b) The rock takes about the same time to hit the water
in each case
(c) The rock hits the water below with the highest speed
in case 1
(d) The rock hits the water with the same speed in each|
case
Student Answer(s):
Student Reasoning:
Answer:
The true statement is;
(b) The rock takes about the same time to hit the water in each case
Explanation:
The given information are;
The direction in which the rock is kicked = Horizontally
The number of different initial horizontal with which the rock as kicked = different horizontal velocity
The time taken for the rock to hit the water is given by the following equation for projectile motion;
y = y₀ + v₀× sin(θ₀)×t - 1/2×g×t²
Where;
θ = The angle the rock makes with the horizontal when it was kicked = 0
y = The height through which the rock drops
y₀ = The initial height of the rock
t = The time taken for the ball to hit the water
g = The acceleration due to gravity ≈ 9.81 m/s²
For the different speeds, v₁, v₂, and v₃, we have;
y = y₀ + v₁× sin(0)×t - 1/2×g×t² = y₀ - 1/2×g×t²
y = y₀ + v₂× sin(0)×t - 1/2×g×t² = y₀ - 1/2×g×t²
y = y₀ + v₃× sin(0)×t - 1/2×g×t² = y₀ - 1/2×g×t²
Therefore, the time it takes for the ball to hit the water is given as follows;
[tex]t = \sqrt{\dfrac{(y_0 - y) \times 2}{g} }[/tex]
Which is the same for each case
However, the speed, v, with which the rock hits the water is given by the following equation;
[tex]v = \sqrt{v_x^2 + v_y^2}[/tex]
[tex]v_y[/tex] = The vertical velocity = v₀ × sin(θ₀) - g×t = v₀ × sin(0) - g×t = -g×t
[tex]v_y[/tex] = -g×t
Therefore, [tex]v_y[/tex], is the same for all three times
While vₓ = v₁, v₂, and v₃, for each of the three times.
Therefore, [tex]v = \sqrt{v_x^2 + v_y^2}[/tex] the speed with which the rock hits the water is different for all three times.
what is a blastocyst definition
Answer: Explanation:
Blastocyst, a distinctive stage of a mammalian embryo. It is a form of blastula that develops from a berrylike cluster of cells, the morula. A cavity appears in the morula between the cells of the inner cell mass and the enveloping layer.
parts of MECHANICAL WAVES
help please UwU
Answer:
waves
Explanation:
ocean
If a person is picking up a book with the force of 50 N and the gravity is pushing down with 15 N, what is the net force?
Answer:
[tex]the \: net \: force = \: 50 - 15 = 35.[/tex]
Answer:
Net force is going to be GREATER FORCE - LESS FORCE if they are working in opposite direction
so,
50N - 15N = 35N
force
(smaller)
large piston
small piston
distance
moved
distance
moved
A
force (greate
liquid that cannot
be compressed
The weight of the car is 5000N. The area of the piston (B) that lifts the car is 0.
(a) What is the pressure needed in the liquid to lift the car?
Answer:
Answer is a force liquid that cannot be compresed
on edgenuity
Explanation:
Ren runs a hamburger stand and needs to clean up a season’s worth of grease buildup on the range hood over his griddle. explain what he should look for in a cleaning product that can handle a layer of grease
Answer:
A cleaning product that contains a base.
Explanation:
Ren should use a cleaning product that contains a base. This is because bases readily react with lipids (fats), the kind of compound that makes up grease. A base would break down the grease, forming soap, which would then easily wash away.
if your having a bad day I LOVE YOU YOUR WORTH IT YOU MEAN THE WORD TO MEEYOU GET KISSES MWHAAAAA
THANK YOU FOR LIVING ILYYY
Answer:
O: girl- aww your so sweeet thanks for that!!!!! like fr ive
been feeling so sad):
You are riding a bicycle. If you apply a forward force of 172 N, and you and the bicycle have a combined mass of 51 kg, what will be the forward acceleration of the bicycle? (Assume there is no friction)
Answer:
The answer is 3.37 m/s²Explanation:
The acceleration of an object given it's mass and the force acting on it can be found by using the formula
[tex]acceleration = \frac{force}{mass} \\[/tex]
From the question
force = 172 N
mass = 51 kg
We have
[tex]acceleration = \frac{172}{51} \\ = 3.372549019...[/tex]
We have the final answer as
3.37 m/s²Hope this helps you
a standby generator is connected to fifteen 40w and a musical 600w amplifying system. how many energy is used up if the generator run 6hours
pls someone answer the question fast
Answer:
1200 watts
-hope this helps
5.Projectile motion is free fall with an initial horizontal velocity. True or false
Explanation:
One of the interesting things about projectile motion is that the horizontal motion is independent of the vertical motion. Recall that in freefall, an object continually experiences a downward acceleration of 9.80ms2 but has no horizontal acceleration.
How does changing the force affect the sound?
Answer:
From a sound standpoint, higher tracking force reduces all other things being equal which might reduce the top end a bit and increase bass.
Give two examples of energy being transformed from one type to another
Answer:
Explanation:
For example, an ice cube has heat energy and so does a glass of lemonade. If you put the ice in the lemonade, the lemonade (which is warmer) will transfer some of its heat energy to the ice.
I need help with this problem
When a chocolate bar is a solid does it have low thermal energy?
Answer:
Tiny particles in solids, liquids and gases are always in motion. It is the motion of particles that creates a form of energy called thermal (heat) energy that is present in all matter. The particles in solids are tightly packed and can only vibrate. Matter in its solid state has the lowest amount of thermal energy (for that type of matter). Because solids have less thermal energy than liquids or gasses, the atoms in their solid state move very little.
Explanation:
So yes, chocolate has VERY low thermal energy
Katrina’s recipe for orange muffins calls for 400 grams of flour. How many kilograms of flour are in the recipe?
Answer:
0.4 Kilograms of flour
Explanation:
If you convert 400 grams into kilograms (400 ÷ 1,000), you would get 0.4 kilograms.
is the universe infinite
Answer:
The observable universe is still huge, but it has limits. because it's most likely like an plane all round.
Explanation:
Answer:
Yes
Explanation:
the universe is constanlty expanding at a rate of 74.3 plus or minus 2.1 kilometers (46.2 plus or minus 1.3 miles) per second per megaparsec (a megaparsec being about 3 million light-years).
What type of energy do you seen In a windmill
Answer:
mechanical energy is in a windmill