Hydrogen (H₂), with its lower molecular weight, will diffuse and effuse the fastest compared to N₂, CO₂, and CH₄, which have higher molecular weights.
Hydrogen (H₂) will diffuse and effuse the fastest. Hydrogen molecules have the lowest molecular weight among the options, which means they have the highest average speed and kinetic energy at a given temperature. This allows them to move more rapidly and diffuse more quickly through a medium.
Diffusion refers to the movement of gas particles from an area of higher concentration to an area of lower concentration. Effusion, on the other hand, refers to the escape of gas molecules through a small opening into a vacuum. The lighter the gas molecules, the faster they will diffuse and effuse due to their higher average speed and smaller collision frequency with other molecules.
To know more about the Diffuse, here
https://brainly.com/question/31609425
#SPJ4
.Rank the following compounds in order of increasing viscosity at a given temperature. CH3OH, CH3CH3, H2C=O
A) H2C=O < CH3CH3 < CH3OH
B) CH3CH3 < H2C=O < CH3OH
C) CH3OH < CH3CH3 < H2C=O
D) H2C=O < CH3OH < CH3CH3
The correct answer is D) H2C=O < CH3OH < CH3CH3Explanation:Viscosity is the measure of the resistance of a liquid to flow.
It is the ratio of shear stress to shear rate, which is a measure of how fast the fluid is moving between the plates. It can be measured in different units such as poise or centipoise.The viscosity of a liquid is affected by the attractive forces between the molecules, which depend on the type of molecules and their intermolecular forces. The stronger the intermolecular forces, the more viscous the liquid.In this case, CH3OH (methanol), CH3CH3 (ethane), and H2C=O (acetone) are the compounds to be ranked. Methanol is a polar molecule with hydrogen bonding and has a higher viscosity than ethane, which is nonpolar and has weak van der Waals forces. Acetone is a polar molecule with dipole-dipole interactions that are intermediate between methanol and ethane. The order of increasing viscosity is therefore H2C=O < CH3OH < CH3CH3.
To know more about compounds visit:
https://brainly.com/question/32086879
#SPJ11
Just as all the organs in a system work together, the various body
systems work together in a healthy person. Can you think of an
example of two systems and how they work together? Explain
your ideas.
Answer:
the lungs and heart give oxygen to the cells and the sensory system gives messages to the brain
Explanation:
Use the drop-down menu to complete the statement. This is why they have similar Atoms of elements in the same group have the same number of chemical properties.
Answer:
valence electrons
Explanation:
i just took the test
A chemist wants to make a gas-liquid solution. However, the gas will not dissolve readily into the liquid solvent. Which step would MOST likely increase the solubility of the gas in the liquid solvent?
A) Expand the volume of the liquid.
B) Increase the temperature of the gas and liquid.
C) Lower the pressure of the gas above the liquid.
D) Increase the pressure of the gas above the liquid.
Answer:
B
Explanation:
Can't really explain it sorry buy heating the solvent tends to increase the solubility
The step that would increase the solubility of the gas in the liquid solvent is to increase the temperature of the gas and liquid.
What is solubility?Solubility is the mixing of any substance into another substance and the fully mixing of the ions of the substance to another substance's ions.
Solubility depends upon temperature, increasing temperature increase the solubility.
In the mixing of gas and liquid, the liquid is solvent and gas is solute, always.
Thus, the correct option is B.
Learn more about solubility
https://brainly.com/question/13620168
WILL RATE BRAINLIST
Your friend works in a bookstore where lab books for science are assembled. Each lab book uses 2 covers, 50 sheets of lined paper, 25 sheets of graph paper and 3 staples. Her inventory includes 150 covers, 7500 sheets of lined paper and 3000 sheets of graph paper and 250 staples. What is the “limiting reactant?” How many complete lab books can be made? How much of each of the other reactants remain in excess?
Answer:
The limiting reactant is the covers.
We are left with 3750 sheets of lined paper, 1125 sheets of graph paper and 25 staples.
Explanation:
the reaction is:
B - book
C - cover
Sl = sheet of lined paper
Sg - sheet of graph paper
St - staple
1B = 2C + 50Sl + 25Sg + 3St
We have covers for 150/2 = 75 books
We have lined paper for 7500/50 = 150 books
We have graph paper for 3000/25 = 120books
We have Staples for 250/3 = 83.(3) books, so for 83 books as we cannot make 1/3 of a book.
Because we only have covers for 75 books, covers are the limiting reactant.
After making 75 books we are left with:
0 covers
7500 - 75*50 = 3750 sheets of lined paper
3000 - 75*25 = 1125 sheets of graph paper
250 - 75*3 = 25 staples
The limiting reactant should be the covers.
We are left with 3750 sheets of lined paper, 1125 sheets of graph paper, and 25 staples.
Calculation of the limiting reaction:
The reaction should be like:
B - book
C - cover
Sl = sheet of lined paper
Sg - sheet of graph paper
St - staple
Now the equation should be
1B = 2C + 50Sl + 25Sg + 3St
We have covers for 150/2 = 75 books
We have lined paper for 7500/50 = 150 books
We have graph paper for 3000/25 = 120books
We have Staples for 250/3 = 83.(3) books, so for 83 books as we cannot make 1/3 of a book.
Now the left should be
7500 - 75*50 = 3750 sheets of lined paper
3000 - 75*25 = 1125 sheets of graph paper
250 - 75*3 = 25 staples
learn more about reaction here: https://brainly.com/question/9230368
Help me pleaseeeeeeeeeee
Answer:
I think A I hope it's A
Explanation:
hsjsjakkska
The structural layers of the sun are shown in the cross-sectional diagram. An image of six concentric circles is shown. The six layers thus formed are of varying thickness. The layers in order from inside out are labeled, A, B, C, D, E, F. Which layer represents the radiative zone? A B C D (21 points plus brainliest!)
A layer represents the radiative zone which is at the centre of the cross-sectional diagram.
What is a radio active zone?The layer of a star that lies just outside the core, to which radiant energy is transferred from the core in the form of photons.
In the Sun, the region between the solar core at 0.2 of the Sun's radius and the outer convection zone at 0.71 of the Sun's radius is referred to as the radiation zone, although the core is also a radiative region.
Learn more about radio active zone here:
https://brainly.com/question/16239768
#SPJ1
B
A is inner core B is outer core and there is a few other layers but from what I know looking at this the second layer has always been the radioactive zone.
If you get this right I would love brainiest
From which celestial body is a star born?
A. supernova
B. nebula
C. protostar
D. black dwarf
Answer: B. nebula
Explanation:
Answer:
B. nebula
Explanation:
Birth takes place inside hydrogen-based dust clouds called nebulae.
-TheUnknownScientist
If the temperature remains constant and pressure is INCREASED on gas, what will happen to the volume?
The volume will increase.
The volume will decrease.
The volume will not change.
The volume will randomly increase and decrease, and keep doing this.
Answer:
I believe the volume should increase.
30g of Aluminum at 80°c is added to 30g of water at 10°c . Predict
the final temperature of the water
Answer:
the explanation of this 20
Explanation:
20 c
How many grams are in 2.33 x 1023 molecules of Fe203?
61.9 grams
2.33x10^23 molecules (159.7 g Fe2O3/6.02x10^23 molecules) = 61.9 g
What is the final concentration of a solution prepared by using 75.0 mL of 18.0 M H2SO4 to prepare 500. mL of solution?
A) 2.35 M
B) 8.33×10-3 M
C) 15.7 M
D) 2.70 M
E) 1.20 M
The required correct answer is D) 2.70 M
The final concentration of a solution prepared by using 75.0 mL of 18.0 M H2SO4 to prepare 500. mL of solution is 2.70 M. Here's how to calculate it:We will use the formula:M1V1 = M2V2where:M1 = initial molarityV1 = initial volumeM2 = final molarityV2 = final volumeGiven that M1 = 18.0 M, V1 = 75.0 mL, and V2 = 500. mL. We can find M2 as follows:M1V1 = M2V218.0 M x 75.0 mL = M2 x 500. mLM2 = (18.0 M x 75.0 mL)/500. mL= 2.70 MTherefore, the final concentration of the solution is 2.70 M. The correct option is D.
Learn more about Final concentration of a solution Here https://brainly.in/question/19273308
#SPJ11
The coffee shop near the local college normally sells 10 ounces of roasted coffee beans for $10. But the shop sometimes puts the beans on sale. During some sales, it offers "33 percent more for free." Other weeks, it takes "33 percent off" the normal price. After reviewing the shop's sales data, the shop's manager finds that "33 percent more for free" sells a lot more coffee than "33 percent off." Are the store's customers making a systematic error? Which is actually the better deal? a. No, they are not making a systematic error because "33 percent more for free" is the better deal. b. Yes, they are making a systematic error because "33 percent off" is the better deal. c. This cannot be determined from the information given.
The “33 percent more for free” deal is better than the “33 percent off” deal. This is because the “33 percent more for free” deal gives you 13.3 ounces of coffee for $10, while the “33 percent off” deal gives you only 6.7 ounces of coffee for $6.67
For the “33 percent more for free” deal:
10 dollars for 10 ounces of coffee
13.3 ounces of coffee for 10 dollars (33% more)
Price per ounce = 10/13.3 = $0.75 per ounce
For the “33 percent off” deal:
10 dollars for 10 ounces of coffee
6.7 ounces of coffee for $6.67 (33% off)
Price per ounce = 6.67/6.7 = $0.99 per ounce
So, the “33 percent more for free” deal is better than the “33 percent off” deal because you get more coffee for your money.
To know more about coffee
https://brainly.com/question/29697224
#SPJ11
Which statement about elements is true?
All substances are made up of elements.
There are approximately 50 elements.
An element is made up of different types of atoms.
Most elements are nonmetal.

Answer:
first one is right.
there are 117 elements, so 2nd option is wrong.
elements are made up of one type of atoms, so 3rd is also wrong.
most elements are metal. so 3rd is wrong
Please Help
How many grams of carbon dioxide (CO2) are produced from 85.0 grams of carbon (C)?
Answer: If one mole of carbon monoxide has a mass of 28.01 g and one mole of carbon dioxide has a mass of 44.01 g , it follows that the reaction produces 44.01 g of carbon dioxide for every 28.01 g of carbon monoxide.
Explanation: (May Be Unrelated?)
Atomic Size: Determine which of the following element pairs is the larger one
1. Carbon or Fluorine
2. Iodine or Fluorine
3. Krypton or Argon
4. Hydrogen or Potassium
what hazard is most common from exposure to non-ionizing radiation?
The most common hazard from exposure to non-ionizing radiation is tissue heating.
What are the hazard common to exposure to non-ionizing radiation?The primary risk associated with exposure to non-ionizing radiation lies in the potential for tissue heating. Non-ionizing radiation lacks the necessary energy to dislodge electrons from atoms or molecules, yet it can still transfer energy to matter by inducing molecular vibration.
This vibration, in turn, can elevate the temperature of the exposed tissue, consequently giving rise to a spectrum of health concerns, including:
Skin burnsEye damageNerve damageCancerLearn about non-ionizing radiation here https://brainly.com/question/9621276
#SPJ4
How many moles are in 19.82 g Mg?
why is it necessary to make sure the stopcock is in the open position and then immediately replace the stopper and syringe assembly in the Erlenmeyer flask after adding the hydrochloric acid to the marble chips?
It is important to keep the stopcock open after adding hydrochloric acid to the marble chips in an Erlenmeyer flask for gas collection and accurate measurement of the carbon dioxide produced during the reaction.
Why is it necessary to make sure the stopcock is in the open position and then immediately replace the stopperBy allowing the gas to escape into the syringe or collection apparatus, the experiment can obtain precise gas volume measurements. Additionally, immediately replacing the stopper and syringe assembly helps prevent gas loss and maintains safety by avoiding the build-up of excessive pressure inside the flask.
These measures ensure the reliable and controlled execution of the experiment while obtaining accurate data.
Read mroe on stopcock here:https://brainly.com/question/29332945
#SPJ4
help me........................ please?
Answer:
2 NO2 -> 2 O2 + N2
is a decomposition reaction
Mg(s) + HCl (l) --> H2 (g) +MgCl2 (s) A student conducted an experiment with 2g of magnesium and 3 mL of 6M hydrochloric acid. Equal volumes (3mL) of hydrochloric acid and magnesium strips (2g) were put into each tube. What are the reactants in this reaction?
Answer: Do you have an image so I can solve it?
how is liming a lake similar to a doctor prescribing medicine for a patient?
Identify the element for this electron configuration: 1s^2 2s^22p^63s^23p^63d^104s^24p.
The element for the given electron configuration 1s²2s²2p⁶3s²3p⁶3d¹⁰4s²4p⁰ is Chromium (Cr).
An element's electron configuration is a numeric representation of how the electrons are distributed among the various energy levels and orbitals. It may provide valuable insights into an element's chemical properties and reactions. To comprehend this electron configuration, we'll go through each sublevel from the lowest to the highest energy level: 1s², 2s², 2p⁶, 3s², 3p⁶, 3d¹⁰, 4s², and 4p⁰.
The 1s sublevel contains two electrons (1s²). In the second energy level, the 2s sublevel contains two electrons (2s²), and the 2p sublevel contains six electrons (2p⁶). The 2p sublevel has three orbitals, each of which may accommodate two electrons. As a result, the 2p sublevel contains six electrons. The third energy level contains 3s² and 3p⁶ sub levels. The 3s sublevel contains two electrons, while the 3p sublevel contains six electrons.
Both sublevels' orbitals may accommodate two electrons. The 3d sublevel is also in the third energy level. It contains ten electrons (3d¹⁰). The 3d sublevel has five orbitals, each of which may hold two electrons. As a result, the 3d sublevel has ten electrons. The 4s sublevel is in the fourth energy level. It contains two electrons (4s²). Finally, the 4p sublevel contains zero electrons. As a result, the electronic configuration 1s²2s²2p⁶3s²3p⁶3d¹⁰4s²4p⁰ is that of Chromium (Cr).
know more about electron configuration,
https://brainly.com/question/14283892
#SPJ11
An organism that makes or creates their own food?
A. Consumer
B. Producer
C. Decomposer
I think producer
option is A
Answer:
B. Producer
Explanation:
A producer is normally a type of plant which is food for the animals. Decomposers are things that decompose dead living things into nutrients and etc. Consumers are the ones who normally feed on producers in the food web and are small animals.
Step 1: Consider 0.10 M solutions of acetic acid, ammonia, hydrochloric acid, and sodium hydroxide. Rank these solutions in order of increasing pH (starting from the lowest, and ending with the highest pH value). Please also make a statement, whether each solution is an acidic or a basic one, and provide an explanation why.
Step 2: How many carbon atoms are there in a molecule of each of the following:
a. ethane b. 1-butyne c. propene d. cyclooctane
Please provide molecular formula for each of the four above mentioned compounds.
Example: 2-pentene - contains 5 atoms of C, molecular formula is C5H10
The order of the increasing pH of the solution is Hydrochloric acid, Acetic acid, Ammonia, and Sodium hydroxide.
Molecular formula of compounds: Ethane: C2H6, 1-Butyne: C4H6, Propene: C3H6 and Cyclooctane: C8H16
Rank of solutions in order of increasing pH:
Hydrochloric acid (HCl) is a strong acid that dissociates completely in water. Its pH is very low (less than 1) and it is strongly acidic. It is an acidic solution. It's a 1.0 M solution of hydrochloric acid.
Ammonia (NH3) is a weak base that does not completely dissociate in water. It is a weak base with a pH greater than 7 but less than 10. It is a basic solution. It's a 1.0 M solution of ammonia.
Acetic acid (CH3COOH) is a weak acid that does not completely dissociate in water. It has a pH of around 3.5-4.0, making it a weakly acidic solution. It is an acidic solution. It's a 1.0 M solution of acetic acid.
Sodium hydroxide (NaOH) is a strong base that dissociates completely in water. It has a very high pH (greater than 14), making it a strongly basic solution. It is a basic solution. It's a 1.0 M solution of sodium hydroxide.
So, from the above explanation, the order of the increasing pH of the solution is
Hydrochloric acid, Acetic acid, Ammonia, and Sodium hydroxide.
Step 2: Molecular formula of compounds:
Ethane: C2H6, contains 2 carbon atoms
1-Butyne: C4H6, contains 4 carbon atoms
Propene: C3H6, contains 3 carbon atoms
Cyclooctane: C8H16, contains 8 carbon atoms
To know more about Molecular formula visit:
https://brainly.com/question/29435366
#SPJ11
C-14 is an isotope of the element carbon. How does it differ from the carbon atom seen here?
A) C-14 has two more protons.
B) C-14 has two more neutrons.
C) C-14 has a larger atomic radius.
D) C-14 has two additional valence electrons.
This column of the periodic table represents the halogen family. This is a family of reactive elements. How do the members of the family differ? How are they alike?
A) The mass numbers differ; they have the same number of protons and valence electrons.
B) They have different atomic numbers and mass numbers; they have the same number of electrons.
C) They have different atomic numbers and mass numbers; they have the same number of valence electrons.
D) They have different numbers of protons, neutrons, and valence electrons; they are all gases at room temperature.
Young stars, just beginning their life in the galaxy, would contain mostly
A) carbon.
B) helium.
C) iron and nickel.
D) hydrogen and helium
C-14 is an isotope of the element carbon and it differs from the carbon atom in the fact that it has two more neutrons. The correct option is B) C-14 has two more neutrons.An isotope is referred to as the element of the same atomic number, and isotopes possess a different number of neutrons in their nucleus.
The correct option is B
For example, the carbon-14 isotope of carbon has 6 protons and 8 neutrons, whereas the carbon-12 isotope of carbon has 6 protons and 6 neutrons .This column of the periodic table represents the halogen family. This is a family of reactive elements. Members of the halogen family differ in that they have different atomic numbers and mass numbers; they have the same number of valence electrons. Hence, the correct option is C) They have different atomic numbers and mass numbers; they have the same number of valence electrons.
The halogens are a family of highly reactive non-metallic elements from Group 17 (the seventh column) of the periodic table. The halogens are fluorine (F), chlorine (Cl), bromine (Br), iodine (I), and astatine (At).Young stars, just beginning their life in the galaxy, would contain mostly hydrogen and helium. Hence, the correct option is D) hydrogen and helium. During the star formation process, these two gases are pulled together by gravity to create nuclear fusion reactions. As a result of this reaction, the hydrogen is converted into helium.
To know more about isotope visit:-
https://brainly.com/question/28039996
#SPJ11
Predict whether the entropy change for this process is positive or negative and explain your answer. Then, predict whether the free energy change for the process is positive or negative and explain your answer.
The given question is incomplete. The complete question is:
Consider the spontaneous dissolution of NaCl in water: NaCl(s) → Na+(aq) + Cl −(aq) Predict whether the entropy change for this process is positive or negative and explain your answer. Then, predict whether the free energy change for the process is positive or negative and explain your answer.
Answer: The entropy change is positive. The free energy change for the process is negative and reaction is spontaneous.
Explanation:
Entropy is defined as the degree of randomness of a system. For a system in which randomness increses , the enetropy is said to increase and [tex]\Delta S[/tex] is positive.
As in the given reaction : [tex]NaCl(s)\rightarrow Na^+(aq)+Cl^-(aq)[/tex] , the solid is dissociating to give ions , randomness increases and thus entropy is positive.
Also the dissociation of a molecule requires energy , thus the enthalpy [tex]\Delta H[/tex] is also positive as heat is absorbed by the system.
[tex]\Delta G=\Delta H-T\Delta S[/tex]
[tex]\Delta G=(+ve)-T(+ve)[/tex]
[tex]\Delta G=-ve[/tex] when Temperature is high.
Consider the spontaneous dissolution of NaCl in water: NaCl(s) → Na+(aq) + Cl −(aq)
Predict whether the entropy change for this process is positive or negative and explain your answer. Then, predict whether the free energy change for the process is positive or negative and explain your answer.
The given question is incomplete. The complete question is:
Consider the spontaneous dissolution of NaCl in water: NaCl(s) → Na(aq) Cl −(aq) Predict whether the entropy change for this process is positive or negative and explain your answer. Then, predict whether the free energy change for the process is positive or negative and explain your answer.
Answer: The entropy change is positive. The free energy change for the process is negative and reaction is spontaneous.
Explanation:
Entropy is defined as the degree of randomness of a system. For a system in which randomness increses , the enetropy is said to increase and is positive.
As in the given reaction : , the solid is dissociating to give ions , randomness increases and thus entropy is positive.
Also the dissociation of a molecule requires energy , thus the enthalpy is also positive as heat is absorbed by the system.
when Temperature is high.
Which of these ideas did you include in your answer?
✔️ When a crystalline solid dissolves, it becomes more disordered.✔️ When disorder increases, ΔG is positive.✔️ This process probably has a positive ΔS .✔️ The process is spontaneous.✔️ Spontaneous processes have ΔG < 0; the process has a negative ΔG .
Have a Nice Day .
what is motion of a force in kinetic energy
Answer:
Kinetic energy, form of energy that an object or a particle has by reason of its motion. If work, which transfers energy, is done on an object by applying a net force, the object speeds up and thereby gains kinetic energy.
How many molecules are contained in 125 grams of oxygen
gas (O2)?
Answer:
i think its 62.50 :) hope this helped you out
What is the relationship between temperature and volume if pressure is held constant?
A. inverse
B. direct
Answer:
A. inverse
Explanation:
Boyle's Law is a relationship between pressure and volume. In this relationship, pressure and volume have an inverse relationship when temperature is held constant. If there is a decrease in the volume there is less space for molecules to move and therefore they collide more often, increasing the pressure.