which factors are related to surface mining? d. both a and b are correct e. all a, b and c are correct a. coal is removed using a loader. b. approx. 90% coal can be recovered c. best used for thick coal seams

In strip mining situations, miners remove a large volume of material, extract the resource, and return the unwanted waste material, also known as mining spoils or tailings.

To learn more about strip refer to:

https://brainly.com/question/29845779

#SPJ4

How a PAT-enabled router sends incoming packets to the correct inside hosts:

The PAT-enabled router uses a combination of the source TCP or UDP port number and the destination IP address on the incoming packet to send the packet to the correct inside host.

This method is beneficial because it allows the router to identify the right host by matching the source port number and the destination IP address, while also allowing multiple connections to the same IP address to be established. This allows the router to send data to the correct inside host, even if the hosts have the same IP address.

Learn more about Router: https://brainly.com/question/14364696

#SPJ4

The kind of thread that should be used in a machine part to a heavy cast iron housing is a national fine thread. The correct option is a.

The root and tips of NF and NF threads differ slightly from one another. It does imply that there are some limitations on thread interchangeability. The pitch of the fine thread is smaller.

There are three classes of unified threads: For applications where a liberal tolerance is necessary to allow for simple assembly even with slightly damaged threads, use 1A (external) and 1B (internal).

Therefore, the correct option is a, national fine.

To learn more about UNF fine thread, refer to the link:

https://brainly.com/question/29708465

#SPJ1

When a program needs to process one or more instructions repeatedly until a condition is met, at which point the loop stops, repetition structures, sometimes known as loops, are utilized. Numerous programming tasks are monotonous and rarely differ from one another.

When a program needs to process one or more instructions repeatedly until a condition is met, at which point the loop stops, repetition structures, sometimes known as loops, are utilized. Numerous programming tasks are monotonous and rarely differ from one another. Repetitive control structures, also known as iterative structures, are collections of code created to repeatedly execute a group of connected statements. This repetition (or iteration) can happen zero or more times before it stops due to a control value or other condition. As long as a condition (known as the loop-continuation condition) is true, programs can execute statements repeatedly using Java's three repetition statements, also known as iteration statements or looping statements. The while, do... while, for, and enhanced for statements are repetition statements.

Learn more about repetition structures here

https://brainly.com/question/13136131

#SPJ4

In machining, welding, and structural applications, aluminum bars, rods, and discs are utilized to create and build parts because they are strong, lightweight, and corrosion-resistant.

These days, engine manufacturers are attempting to maintain the excess mass at the bottom of the rod and remove more weight from the piston; for this reason, an aluminum rod is advantageous. They are nonetheless stronger for their weight than steel rods since there is a lot more substance at the bottom, according to Antony. The well-known properties of aluminum make the process of bending it quite simple. Aluminum is a soft, ductile, malleable, and light metal in its highest purity forms. These characteristics enable aluminum to be bent without running the risk of breaking or developing fractures. A useful metal that is lightweight, corrosion-resistant, and simple to produce is the aluminum alloy rod.

To learn more about aluminum rods click the link below:

brainly.com/question/13862183

#SPJ4

The correct answer is A dynamic analysis is necessary if the force P acting on the structure varies so quickly that the inertial and damping forces significantly alter the equation of equilibrium.

Dynamic analysis is the process of evaluating and testing a programme utilising real-time data execution. The objective is to find bugs in a software when it is being used, as opposed to continually analysing the code offline. Structural dynamics is a type of structural study that looks at how a structure reacts to dynamic (high-acceleration) loads. Traffic, earthquakes, explosions, wind, waves, and people are all examples of dynamic loads. Any structure may be subjected to dynamic loading. The tasks that make up dynamic testing methodologies in the STLC include requirements analysis for the tests, test planning, test case design and implementation, test environment setup, test case execution, issue reporting, and test closure.

To learn more about dynamic analysis click the link below:

brainly.com/question/28486515

#SPJ4

The ratio of the input voltage to the output voltage is known as the small signal voltage gain (Av): The tiny signal output current, io in the collector or drain, is equal to the input voltage V in (vbe for the BJT and vgs for the MOS) multiplied by the transconductance g m.

At each step of the VGS increase, record the drain current (ID). Divide the slight changes in the current ID by the small changes in VGS to obtain the transconductance (gm). A tiny signal is an AC signal that is overlaid on a bias signal (more precisely, a signal with zero average value) (or superimposed on a DC constant signal). This splitting of a signal into two halves enables the use of superposition to streamline subsequent analysis.This transconductance connects the output current to the transistor gain represented by the input voltage. Therefore, with a constant value of VDS, the formula for the slope of the transconductance curve is given as gm = ID/VGS.

To learn more about voltage click the link below:

brainly.com/question/29445057

#SPJ4

The power that the engine will deliver at 3500 rpm is; 87.61 kJ/s

We are given;

Compression Ratio; V₁/V₂ = 22

Cut off ratio; V₃/V₂ = 1.8

Speed; N = 3500 rpm

The temperature after the compression is given by the formula;

T₂ = T₁(V₁/V₂)^(λ - 1)

Where;

T₁ is the temperature before compression

V₁ is the volume before compression

V₂ is the volume after compression

λ is the adiabatic constant of air = 1.4

We are given;

T₁  = 70°C = 70 + 273 = 343 K

Thus;

T₂ = T₁(22)^(1.4 - 1)

T₂ = 1181.03 K

The temperature after the constant pressure expansion in diesel cycle is given by the formula;

T₃/T₂ = V₃/V₂

Plugging in the relevant values;

T₃ = 1181.03 * 1.8

T₃ = 2125.854 K

The temperature T₄ after the isentropic expansion of air is given by the formula;

T₄ = T₃(V₃/V₄)^(λ - 1)

Plugging in the relevant values gives;

T₄ = T₃(1.8V₂/V₄)^(λ - 1)

where V₂/V₄ = V₂/V₁

Thus;

T₄ = T₃(1.8V₂/V₁)^(λ - 1)

T₄ = 2125.854(1.8/22)^(1.4 - 1)

T₄ = 781 K

The mass of air in the system is given by;

m = P₁V₁/RT₁

Where P₁ = 97 KPa and R is gas constant =  0.287kPa⋅m³/kg⋅K

Plugging other relevant values and solving gives;

m = 0.00236 kg

The ideal the specific heat of air at constant pressure cp using ideal gas properties table and by interpolation here is cp = 1.0076 kJ/kg.K

The  heat added to the cycle is given by the formula;

Q_in = mcp(T₃ - T₂)

Plugging the relevant values and solving gives;

Q_in = 2.246 kJ

The heat rejected by the cycle is given by the formula;

Q_out = mcv(T₄ - T₁)

cv is the specific heat at constant volume and from ideal gas properties table and by interpolation gives cv = 0.7205 kJ/kg.K

Thus;

Q_out = 0.00236 * 0.7205(781 - 343)

Q_out = 0.744 KJ

Thus, power that the engine will deliver at 3500 rpm is;

W' = N(Q_in - Q_out)

Where N = 3500 rpm = 3500/60 rps

Thus;

W' = (3500/60)(2.246 - 0.744)

W' = 87.61 kJ/s

Read more about power delivered at; https://brainly.com/question/19213954

#SPJ1

The genetic algorithm, which is based on natural selection, the mechanism that propels biological evolution, is a technique for resolving both limited and unconstrained optimization issues. A population of unique solutions is repeatedly modified by the genetic algorithm.

A genetic algorithm (GA), which is a subclass of the larger class of evolutionary algorithms in computer science and operations research, is a metaheuristic that takes its cues from the process of natural selection (EA). Genetic algorithms frequently employ biologically inspired operators including mutation, crossover, and selection to produce high-quality solutions to optimization and search issues. Solving sudoku puzzles, hyperparameter optimization, and performance-enhancing decision trees are a few examples of GA applications. To solve complex issues with a greater number of variables and potential outcomes/solutions, a genetic algorithm is used. To select the best answers, combinations of several solutions are run through a Darwinian-based algorithm. The poorer solutions are then replaced with the offspring of good solutions.

Learn more about genetic algorithm here

https://brainly.com/question/28566003

#SPJ4

The size overcurrent protective device that should be selected in this case is 50A.

An overcurrent protective device may be characterized as a piece of electrical equipment that is used to protect service, feeder, and branch circuits and equipment. These devices include circuit breakers and fuses.

According to the context of this question, overcurrent protection devices are to be sized no less than 125% of the continuous load, plus 100% of the noncontinuous load. But in this question, only 50 A of OCPD is used for nonmotor loads feeds a continuous load rated at 20A and a noncontinuous load at 25A.

Therefore, the size overcurrent protective device that should be selected in this case is 50A.

To learn more about Overcurrent protective device, refer to the link:

https://brainly.com/question/28275759

#SPJ1

Answer:

True

Explanation:

True. It is useful to inquire about family perspectives on issues inherent in each of the layers when conducting an assessment because this can provide valuable insight into the individual's environment and support system. By understanding the perspectives of the individual's family members, the assessor can gain a more complete understanding of the individual's situation and develop more effective interventions.

A DC motor's direction of rotation can be changed by switching the connections between the supply and the armature or the field winding.

Learn more about DC motor's direction of rotation refer to :

https://brainly.com/question/17193560

#SPJ4

The operating range of a straightforward perfect Rankine cycle using water as the working fluid is between 3 MPa in the boiler and 30 kPa in the condenser. If the quality at the turbine's exit cannot be lower than 80%.

What is  Rankine cycle?

The efficiency of the Rankine cycle is reported to range from 35 to 45% when it is actually operating. 10. The Boiler is operated at 3 MPa with a 350°C outlet temperature under a straightforward Rankine cycle, while the Condenser is operated at 50 kPa.

The mechanism by which some heat engines, such as steam turbines or reciprocating steam engines, permit mechanical work to be extracted from a fluid as it flows between a heat source and a heat sink is described by the Rankine cycle, an idealized thermodynamic cycle for a particular operating pressure.

To learn more about Rankine cycle from given link

brainly.com/question/16836203

#SPJ4

Asymmetric Server, There are numerous pathways for both incoming and outgoing network traffic in an asymmetric network.

Asymmetric communications include things like Asymmetric Digital Subscriber Line (ADSL). On existing phone lines, ADSL technology sends digital data at a high bandwidth. Because asymmetric cryptography employs two different keys—a public key that is only ever used to encrypt messages, making it safe for anyone to possess, and a private key that is only ever used to decrypt messages and is never shared—it provides stronger security. Natural forms frequently exhibit asymmetry: you are likely right- or left-handed; fiddler crabs have variously sized claws; tree branches develop in various directions; clouds have a variety of shapes. Asymmetry tends to be more fascinating than symmetry because it fosters more intricate interactions between parts.

Learn more about primitive-type variables here

https://brainly.com/question/27900879

#SPJ4

There is an even better approximation algorithm, a so-called PTAS1.

we are given m machines, and 2m+ 1 jobs. There are three jobs with processing time m, and

2 jobs with processing times m + 1, m + 2, . . . , 2m − 1 each. In case of LPT, all but one of the machines

get two jobs with a total processing time of 3m − 1, and a single machine gets three jobs with a total

of 4m − 1 processing time. Thus, the makespan is 4m − 1. OPT schedules the three m jobs on a single

machine, and the remaining jobs on the remaining m−1 machines, such that each of those machines get

with the exception of one machine receiving three jobs with a total processing time of 4m 1.

the approximation ratio approaches 4/3.

There is an even better approximation algorithm, a so-called PTAS1

for this problem, but it is not

covered by this lecture.

To learn more about algorithm refer to:

https://brainly.com/question/24953880

#SPJ4

The cylinder, motor, or rotary actuator of a fluid power device is supplied with pressurized fluid by a pump.

The cylinder, motor, or rotary actuator of a fluid power device is supplied with pressurized fluid by a pump. Variable flow rates from the pump or through valves inside the fluid power circuit are used to control output speed and direction.

are utilized in a range of applications, including heavy machinery, robotics, and automotive braking systems. Using either hydraulic or pneumatic cylinders, these devices generate linear motion.

When compared to other conventional power-transmission methods, fluid power has the highest power density. Fluid power systems can be divided into two categories: pneumatic and hydraulic. Pneumatic systems employ neutral gases like air, whereas hydraulic systems use liquids like water and oil.

Therefore, the correct answer is option a) Control System.

To learn more about fluid power refer to:

https://brainly.com/question/22590501

#SPJ4

In areas where compaction is required, there must be at least 1' above the pipe before compaction with mechanical means.

Compaction refers to the mechanism which expels entrapped air from freshly placed concrete and packs together the aggregate particles so as to maximize the density of concrete. Compaction significantly increases the ultimate strength of concrete and enhances the bonding with reinforcement. In simple terms, compaction occurs when particles are pressed together in order to reduce the space between them. In areas where compaction is needed, it is kept into consideration that there must be at least 1' above the pipe before compaction is performed.

You can learn more about concrete at

https://brainly.com/question/25500184

#SPJ4

False. Ion channels are usually closed and only open when stimulated by a signal such as a change in voltage or a chemical messenger.

Ion channels play a critical role in controlling plasma membrane permeability.

Ion channels are transmembrane proteins that open and close to control the entry and exit of ions across the plasma membrane. These channels open when they receive an external signal, such as a change in voltage or a chemical messenger.

Ion channels allow selective passage of ions across the plasma membrane. This means that some types of ions can pass through the membrane while others cannot. This selectivity allows the cell to control the exchange of ions with the external environment. Ion channels are also responsible for the conduction of ions across the plasma membrane, which allows cells to transmit signals across the plasma membrane.

Learn more about Ion channels in the plasma membrane:

https://brainly.com/question/28543916

#SPJ4

A)The element is a capacitor with a capacitance of 10F.

Since the phase angle between the voltage and current is 90 degrees, the element is a capacitor with a capacitance of

C = V/Iω

= 200∠30∘V / (4∠120∘A)(500 rad/s)

= 10∠−90∘F

= 10 F.

B) )The element is an inductor with an inductance(L) of  20 H.

Since the phase angle between the voltage and current is −90 degrees, the element is an inductor with an inductance of

L = V/Iω

= 40∠−45∘V / (4∠−135∘A)(500 rad/s)

= 20∠135∘H

= 20 H.

C) The element is a resistor with a resistance(R) of  1.75 Ω.

Since the phase angle between the voltage and current is 0 degrees, the element is a resistor with a resistance of

R = V/I

= 7∠45∘V / (4∠45∘A)

= 1.75 Ω.

For more questions like Capacitance click the link below:

https://brainly.com/question/14893729

#SPJ4

Complete question:

A) A certain element has a phasor voltage of V=200∠30∘V and current of I=4∠120∘A. The angular frequency is 500 rad/s. Determine the nature of the element.

Determine the value of the capacitance (C) .

Express your answer to three significant figures and include the appropriate units.

B) Repeat Part A for V=40∠−45∘V and current of I=4∠−135∘A.

Determine the value of the element( L) Industance.

Express your answer to three significant figures and include the appropriate units.

C) Repeat Part A for V=7∠45∘V and current of I=4∠45∘A.

Determine the value of the resistance .

Express your answer to three significant figures and include the appropriate units.

The effect of the harmonic disturbance can be determined.

What is frequencies?

Frequencies refer to the number of occurrences of a repeating event per unit time. It is commonly used when discussing sound and electromagnetic radiation, such as radio and light waves. In these cases, frequency describes the number of wave cycles per second, measured in hertz (Hz). It is also used to describe the number of occurrences of a particular event within a given time frame. For example, a frequency chart may show the number of times a certain type of crime occurred in a given month or year.

The natural frequencies and mode shapes of the three-degree-of-freedom system with one mass corresponding to the right wing, one mass for the left wing, and one mass for the fuselage can be calculated by solving the eigenvalue equation for the system. The mode shapes are the eigenvectors of the system and represent the relative displacement of the three masses for each mode. The mode shapes can be plotted to show the deflection of the wings and fuselage in response to the applied force or displacement.
To calculate the resulting vibration of the cabin, the impulse response of the system needs to be calculated with modal damping of 0.1 in each mode. This can be done by solving the differential equation describing the system and applying the impulse force at the ends of the left and right wings. The resulting vibration of the cabin can be found by solving the resulting equation.
To calculate the effect of the harmonic disturbance on the cabin and wing tips, the response of the system needs to be calculated with 10% modal damping in each mode. This can be done by solving the differential equation describing the system and applying the harmonic force at the cabin mass. The resulting vibration of the cabin and wing tips can be found by solving the resulting equation. After subtracting out the translational or rigid motion, the effect of the harmonic disturbance can be determined.

To learn more about frequencies
https://brainly.com/question/21086961
#SPJ4

Data governance involves the staff, procedures, and technologies needed to supervise and protect the data and data properties of an entity.

The phrase "data governance" is used both at the macro and micro levels. The first is a political idea that plays a role in global politics and Internet governance, while the second is a data management idea that plays a role in corporate data governance. Setting internal guidelines—data policies—that control how data is gathered, processed, kept, and disposed of is referred to as data governance. It regulates who has access to what data types and which data types are governed. Data owners, data stewards, and data custodians are often represented on the steering committee of a strong data governance program. In particular, the reference data and master data elements, are governed by policies, processes, and procedures developed by the three positions.

Learn more about Data governance here

https://brainly.com/question/15000727

#SPJ4

Conduction is the transfer of heat through a solid material. Convection is the transfer of heat by moving air. Radiation is the transfer of heat in the form of electromagnetic waves.

Conduction is a process in which heat is transported between parts of a continuum, by direct physical contact. Convection is the principle by which heat is transferred by electric currents in a liquid, i.e. liquid or gas. Radiation is a heat transfer mechanism, where the conversion takes place through electromagnetic waves.

Electrical conduction usually occurs in solids by molecular collisions. Convection occurs in liquids due to mass motion of molecules in the same direction. In contrast, radiation occurs in the vacuum of space and does not heat the intermediate medium.

Learn more about conduction, convection, and radiation https://brainly.com/question/893656

#SPJ4

We are going to solve this question with the help of "Toll Bridge Puzzle" using strategies based on place value and properties of operations.

The image below depicts bridges connecting islands. You must pay a toll in coins to cross a bridge. How can you get to the island marked in red if you start on the island marked in blue with 100 coins?

Step-By-Step Explanation:

This task is designed to assess the addition of four numbers as specified in the standard while remaining in a problem-solving context.

This task is intended to be instructional; however, due to the random nature of when the correct route is discovered, it is not suitable for assessment.

This puzzle works well as a physical re-enactment, with paper plates representing the islands and strings with papers attached representing the tolls.

The single digit numbers will often lead students to believe that the route must pass that way. They may also miss the "crossover" by using the central island, finding the 23 + 25 + 29 + 24 route but not the 32 + 15 + 40 + 38 route or the 32 + 15 + 29 + 24 route.

Technically, paths that run from right to left along some bridges (for example, 32 + 5 + 41 + 40 + 29 + 24) could also be considered. In this case, however, such paths can be ignored because students will find a cheap enough path by only investigating paths that run from left to right. One might be tempted to modify the problem by having the student start with 99 coins and ask if reaching the red island is possible. Such a change, however, would be inappropriate because a mathematically valid solution would require the student to consider all paths, including those that cross some bridges from right to left.

Solution:

32 + 15 + 29 + 24 = 100

Other possible routes:

23 + 51 + 3 + 24 = 101

23 + 25 + 29 + 24 = 101

23 + 25 + 40 + 38 = 126

32 + 15 + 40 + 38 = 116

32 + 5 + 41 + 38 = 116

To know more about properties of operations, visit: https://brainly.com/question/15143062\

#SPJ4

The both technician is correct for their statement about fuse links.

Fuse links is safety device for mechanical or electrical uses. The mechanical fuse link will have safety mechanism to fire sprinkler, and for electrical fuse link will have safety mechanism to break a circuit if have electrical failure.

The fuse links usually made up of wire that attached to two terminal or in this case to larger diameter conductors.

The maxi fuse currently is commonly used than fusible links especially in vehicle circuits because it offers protection from high amperage.

Learn more about fuse links here:

brainly.com/question/15409880

#SPJ4

Transmitter- A device that senses a process variable using a sensor and produces an output whose steady-state value changes only in accordance with the process variable's preset function.

What is Transmitter?

A device whose steady-state value varies solely as a predetermined function and senses a process variable through the use of a sensor. a process variable that the control signal is perceived in response to. A transmitter's signal is received by an instrument, which then compares it to a predetermined value. An energy converter changes one kind of energy into another. Transducers often transform one form of energy, such mechanical or magnetic, into a measurable quantity on the other end, like an electrical signal. When it comes to process control.

To learn more about Transmitter from given link

brainly.com/question/2084370

#SPJ4

Option C is correct. Swage joints must be used to connect two pieces of copper tubing by soldering or brazing without the use of any fittings.

Swaging is the process of fitting the end of one copper tube over the other so that the junction may be brazed or soldered. It is used to unite two copper tubes of the same diameter.

In order to permanently unite fittings to pipes or cables (also known as wire ropes), swaging is most frequently used. After the parts are loosely assembled, the fitting is compressed and deformed by a mechanical or hydraulic tool.

A swage joints is a wire rope component by definition. By squeezing the fitting on the wire, it is fastened to the wire.

Know more about compressed here:

https://brainly.com/question/14828391

#SPJ4

The control plane is where routing, which determines the path packets go from source to destination, is implemented. In the data plane, forwarding is the process of transporting packets from a router's input to the correct router output.

What is following statements?

In the data plane, forwarding is the process of deciding the path packets will take from source to destination. Moving packets is referred to as routing. While routing is the global action of selecting the source-destination paths traveled by packets, forwarding is the local action of moving arriving packets from the router's input connection to the appropriate router output link.

In contrast to the forwarding table, which contains port information, the routing table contains information on path routing.

To learn more about following statements from given link

brainly.com/question/26105799

#SPJ4

Take care of bothersome problems and restore any phone to peak condition with these simple, professional-recommended fixes.

Just keep in mind this cute little proverb when you notice that your phone's storage is beginning to run low: "Stop hoarding stuff, you unruly digital packrat." It might not have been as catchy as I had planned, but still.

Since cloud syncing and automated administration are both straightforward on Android, the most of us today really don't require anything stored locally on our devices. Install the Photos app first, then configure it to automatically backup all pictures and videos as they are being taken. That will enable you to delete the local copies and give you a terrific way to access all of your memories from any device, at any time, even if you misplace or damage your current Android phone.

Know more about configure here:

https://brainly.com/question/13410673

#SPJ4