Which expression is equivalent to −3(4x + 3y)?

3y(4x − 3)
4x(−3 + 3y)
−12x + 3y
−12x − 9y

The Bronsted-Lowry acid-base theory clarifies what Svante Arrhenius were not able to explain in their theory of acids and bases regarding ammonia as -

Svante Arrhenius theory states that -

In order for a substance to release H⁺ or OH⁻ ions, it must contain that very ion. But, this does not explain the weak base ammonia NH₃.

In Bronsted-Lowry acid-base theory -

Acids are the proton donating group while bases are the proton accepting group.

Ammonia is a nitrogen and hydrogen inorganic compound. Ammonia is a gas which is colourles, it is strong, and has a pungent smell. Its chemical formula is NH₃.

Ammonia is a stable binary hydride. It is the most basic nitrogen hydride. It is a typical nitrogenous waste, specifically among aquatic organisms. It contributes to the nutritional requirements of terrestrial organisms. It acts as a forerunner to 45 percent of the food and fertilizers all over the world.

70% of ammonia with urea and di-ammonium phosphate, is used to create fertilizers. It is available in a variety of shapes and compositions. The pure ammonia is spread onto the ground.

To learn more about acid-base theory,

brainly.com/question/23176932

#SPJ1

Phenol has a molar mass of 94.11 g/mol.It is an active ingredient in many oral anesthetics that is used in sore throat sprays.

To calculate molar mass the following steps must be followed:

1) Divide the molar mass of phenol by the molar mass of carbon. This will give you the number of moles of carbon in phenol.

2) Add the number of moles of carbon to the number of moles of hydrogen. This will give you the total number of moles in phenol.

3) Multiply the total number of moles by the molar mass of carbon.

This will give you the molar mass of phenol.

Learn more about Phenol at : https://brainly.com/question/19131807

#SPJ4

Answer: Gains an extra electron in 2p orbitals it's option Y (1s²,2s², 2p⁶

Explanation:

To find the ionic charge of an element you'll need to consult your Periodic Table. On the Periodic Table metals (found on the left of the table) will be positive. Non-metals (found on the right) will be negative.

KE=1/2 mV^2

m=mass

V=velocity

yes, the equivalence point would change as acetic acid is a weak acid and dissociates partially but hydrochloric acid is a strong acid and dissociates completely.

Equivalence and endpoint differ primarily in that the former refers to the point at which a chemical reaction ends and the latter, to the time at which a system's color changes.

When enough titrant has been administered to entirely neutralize the analyte solution in a titration, this is known as the equivalence point. The titrant (standard solution) has a molecular weight that is equal to the moles of the solution with the unknown concentration.

Learn more about equivalence points here:-

https://brainly.com/question/10730106

#SPJ4

Plasmas are less dense than solids or liquids and have no set shape or volume. Plasmas are made up of atoms with some or all of their electrons stripped away and positively charged nuclei, known as ions, roaming freely.

Plasmas is defined as a type of substance in which numerous electrons freely roam around the nuclei of the atoms.

Plasma has been referred to as the fourth state of matter, alongside solid, liquid, and gas.

When one or more electrons are ripped from an atom, they form a plasma.

Thus, plasmas are less dense than solids or liquids and have no set shape or volume. Plasmas are made up of atoms with some or all of their electrons stripped away and positively charged nuclei, known as ions, roaming freely.

To learn more about plasmas, refer to the link below:

https://brainly.com/question/18207038

#SPJ1

The  statement one is incorrect because the elements in periodic table has some similarities between them they are not completely different from each other.

The difference in stability between the electron configurations of metals as atoms and as ions is what causes metals to be reactive. Since they are all metals, when they interact, positive ions are produced.

To learn more about metals refer

https://brainly.com/question/28650063?referrer=searchResults

#SPJ13

Answer:

235

Explanation:

Of the 6 carbons in a starting molecule of glucose, at the completion of pyruvate oxidation, two carbons are fully oxidized to CO2, while four carbons remain in acetyl groups.

This is further explained below.

Generally, The acetyl group is a functional group that is used in organic chemistry.

Its chemical formula is [tex]COCH_3,[/tex] and its structural formula is [tex]CCH_3.[/tex]Occasionally, the sign Ac will be used to symbolize it.

In the nomenclature used by the IUPAC, acetyl is referred to as ethanol, despite the fact that very few people actually use this name. A methyl group is found inside the acetyl group, and it is single-bonded to a carbonyl.

In conclusion, At the end of the pyruvate oxidation process, two of the six carbons that were present in the glucose molecule at the beginning are converted into carbon dioxide, while the other four carbons are still present as acetyl groups.

Read more about acetyl groups.

https://brainly.com/question/28198873

#SPJ1

The element tellurium forms an ion with the charge of +4.

The symbol for this ion is Te⁴⁺ and the name is tellurium ion.

The number of electrons in this ion is 48 electrons.

Ions are substances that are formed when atoms of elements gain or lose electrons.

There are two types of ions based on the charge the ions carry:

Metallic atoms form cations by losing one or more electrons.

Non-metallic atoms form negative ions by gaining one or more electrons.

Learn more about ions at: https://brainly.com/question/1310794

#SPJ1

Each statment correct phrase is completed.

1- Conformers are organisms that do not regulate their internal condition to the environment that habitat.

2- A change is an organisms surrounding that causes the organisms to react is called a stimulus.

3- soil,water and weather are abiotic factors of habitat.

4-An ecosystem consist of all the living organisms in an area.

6- ecology is the study of how organisms interact with one another and with their physical environment.

7-The many different species live together in a habitat are called a community.

8-ecology is the study of organisms and how they interact with the environment around them.

9-organisms that eat producers are called primary consumer.

10-The physical aspects of habitat are called abiotic factors.

11-A place where paticular population of species lives is called it's habitat.

To know more about phrase click -

https://brainly.com/question/25938417

#SPJ9

In the given examples ice cream melts in a bowl is an example of a physical change.

A physical change occurs when a substance transforms from one state to another i.e., the change only affects its physical properties like color, volume, shape, and phase changes.

Using water as an example, if we have it at room temperature, it is a clear liquid. If we decrease the temperature below the freezing point, the water freezes and forms ice. If we increase the temperature above the boiling point, the water turns into a gas(steam). We can see that in all three forms, the water is still composed of two hydrogen atoms and one oxygen atom. Nothing is added or subtracted from it, which means the chemical composition stays the same. The transformation of water from liquid to solid or gas is an example of a physical change.

Learn more about physical change here:
https://brainly.com/question/13339068

Molarity :

The number of moles of solute per liter of solution is known as molarity or molar concentration. It is used to express the concentration of a given solute in a solution.

It can be calculated using the formula, Molarity = [tex]\frac{number-of- moles-of-solute}{Volume-of-the-solution-in-liters}[/tex]

Given data:

Molarity of the solute, copper(III) sulfate  = 1.25 M

Volume of the solution = 670 mL = 0.67 Liters

Then, Molar mass of the solute,  = 415.2 g/mol

Then, number of moles of solute =  Molarity x Volume of solution

                                                        = 1.25 x 0.67 = 0.8375 moles.

Then, Mass of the solute  

=  Molar mass of solute x number of moles of solute

= 415.2 g/mol x 0.8375 mol = 347.73 g.

Therefore, the mass of solute in grams required are  = 347.73 g

To know more about Molarity, visit,

https://brainly.com/question/16587536

#Molarity

The word "however" from the passage from Sue Macy's book Wheels of Change denotes a shift in strategy. As a result, Option D is the appropriate statement.

What does Wheels of Change's theme entail?

The narrative "Wheels of Change" has as its central message that you should no longer be frightened to speak up for yourself and other people. This was demonstrated as girls' racing gained popularity.

Cycling has gotten more violent, and males have developed a strong concern about girls getting their rights. The Springfield Bicycle Club was established in 1881. While giving back to the community, Wheels of Change empowers citizens, boosts self-esteem, AND offers worthwhile transitional work. For $13/hour, Wheels of Change offers temporary jobs to people staying at the Temporary Bridge Shelter program run by Alpha Project.

To know more about Wheels of Change refer to brainly.com/question/18885706

#SPJ1

A hiker climbs to the top of a mountain at rate of 0.5 m/hr. The speed of hiker is 1.3 x 10⁻⁴ m/s and the velocity of the hiker is 1.3 x 10⁻⁴ m/s west.

Speed is a scalar quantity. It is used to measure the distance traveled in a period of time. It is represented by -

s = d/Δt

where,

s = speed

d = distance

Δt = change in time

Velocity is a vector quantity. It is used to measure the change in position, that is, displacement over the change in time. It is represented by -

v = Δs / Δt

where,

v = velocity

Δs = change in position/displacement

Δt = change in time

The standard unit of velocity and speed both is m/s.

To learn more about speed and velocity,

brainly.com/question/5794232

#SPJ1

ANSWER

STEP-BY-STEP EXPLANATION

Answer:

you will find 3 in aluminium

hydrogen should be b 3

and oxygen is 9

The entropy of mixing of nitrogen and oxygen gases of mole fractions of 0.78 and 0.22 respectively is -4.34 J  and the molar Gibbs energy of mixing is - 1295.7 J. Negative sign of Gibbs energy indicates that the reaction is spontaneous.

A spontaneous reaction is the one which occurs naturally  without any urge or external factor or force. Spontaneity of a reaction can be determined from the Gibbs energy of the reaction. If Gibbs energy is negative then, the reaction is spontaneous and if positive reaction will be non- spontaneous.

Entropy of mixing is calculated using the mole fractions of the two gases Xa and Xb as written as follows:

ΔSmix =  R (Xa in Xa + Xb in Xb).

Where R is the universal gas constant equal to 8.314 J/(K mol)

We have the mole fraction of nitrogen and oxygen in the reaction. Apply these values to the equation as follows:

ΔSmix  = 8.314 (0.78 ln 0.78 + 0.22 ln 0.22)

            = -4.34 J

Molar gibbs energy of mixing  =  RT (Xa in Xa + Xb in Xb).

Thus ΔGmix = TΔSmix

                     = 298 K × -4.34 J

                     = -1295.7 J.

Therefore, the reaction of mixing of nitrogen and oxygen is spontaneous.

To find more about entropy of mixing, refer the link below:

https://brainly.com/question/13153027

#SPJ1

Answer:

Explanation:

The only option that would have 6 moles is 67.2 L

The pH of the solution is 7.94 if the concentration of the tris acid is 0.200m and the concentration of the conjugate base is 0.150m.

The pH of this buffer can be calculated using the Henderson-Hasselbalch equation according to which the pH is equal to the sum of the pKa value and the log of the concentration of conjugate base divided by the concentration of the weak acid.

This equation can be represented as;

pH = pKa + log ([conjugate base] ÷ [weak acid])

Substituting the given values into this equation to find the pH;

pH = 8.06 + log([0.150] ÷ [0.200])

pH = 8.06 + log(0.75)

pH = 8.06 + (-0.125)

pH = 7.94

Therefore the pH of this solution is calculated to be 7.94.

To learn more about pH, click here:

https://brainly.com/question/24297012

#SPJ4

For the original solution,

Concentration = 85g/L = 85g/1000ml

Required Volume = 150ml

(a)

Concentration = Mass/Volume

⇒ 85g/1000ml = Mass of the solute/150ml

⇒ Mass of the solute = 85 x 150/1000

⇒ Mass of the solute = 12.75 grams

Hence, 12.75 grams of the solute is required to prepare the original solution.

(b)

Now,

Concentration of the original solution = 85g/L = M1

Required concentration = 50g/L = M2

Final Volume = 500 ml = V2

Required Volume from the original solution = V1 =?

As we know,

M1V1 = M2V2

Hence,

85g/L x V1 = 500 ml x 50g/L

⇒ V1 = 500 X 50 / 85

⇒ V1 = 294.11 ml

Therefore, 294.11 ml of the original solution is required to make the diluted solution.

To learn more about the Stock solution, refer to:

https://brainly.com/question/28083950

#SPJ13

Omar is facing a problem with money.

Businesses typically use earnings and revenue to describe their financial performance over a period of time. Profit and turnover are the two most valuable numbers in a company's financial statements.

Revenue is the total money a company earns from the sale of goods and services. Income is called the top line because it is at the top of the company's income statement, which also refers to the company's gross sales. Income is the income received before expenses are deducted. Turnover is also called turnover in some companies, because turnover includes potential returns from customers.

Profit, on the other hand, reflects the bottom line of the income statement and is the profit the company earned during the period. The profit indicator is entered in the net result of the profit and loss statement. When investors and analysts talk about a company's performance, they are talking about the company's net income or earnings.

To learn more about Earnings, visit;

https://brainly.com/question/28045589

#SPJ13

Answer:

Lithium is the most reactive out of them.

Explanation:

For this question, we will be looking at the valence electrons each one has. Valence electrons are the electrons that are on the outermost electron shell (the outer circle around each of them).

Lithium has 2 electron shells: the innermost has 2 electrons (this circle can only hold up to 2 electrons), and the outermost circle has 1 electron (this circle can hold up to 8 electrons).

Helium has only 1 electron shell and within it, it has 2 electrons (remember this is the maximum amount this circle can take).

Argon has 3 electron shells: the innermost has 2 electrons (the maximum this circle can have), the middle one has 8 electrons (the maximum this circle can have), and the outermost circle has 8 electrons around it (this circle also holds a maximum of 8 electrons).

Now let's look at the electrons present only on the outer shell of each of them (these are called valence electrons).

Lithium has only 1 electron on its outermost shell but this shell can have up to 8 electrons.

Helium has 2 electrons, the maximum amount that circle can have.

Argon has 8 electrons, the maximum that circle can have.

-Every atom has the goal of wanting to be stable, by completing the maximum amount on their outermost shell by either gaining or losing electrons.

Since Helium and Argon already have the maximum amount of electrons their outermost circle can have, they are already stable and neither want to gain or lose electrons.

Lithium is our only option that has an incomplete outermost electron shell with only 1 out of the 8 electrons it can have.

It is easier for Lithium to give away that 1 electron it has and then have a complete inner-circle after giving out that 1 electron (it would then look like Helium), than to gain 7 electrons and complete the circle.

This is why Lithium is very reactive, because it is constantly looking to find someone to give away their electron to and become stable. Lithium also has a charge of (+1), which means that it gives away one of its electrons.

In a parallel circuit with identical light bulbs, the statement D is true. D Adding more identical light bulbs will not change their brightness.

A parallel circuit has two or more paths for modern to waft through. Voltage is equal across everything of the parallel circuit. The sum of the currents thru each route is equal to the entire modern that flows from the supply.

A parallel circuit has one feature: to preserve the power flowing while one pathway is interrupted. A top instance is mild furnishings that use more than one mild bulb. when an unmarried bulb within the fixture goes the light fixture maintains to operate.

In a chain circuit, the modern-day thru every one of the additives is the same, and the voltage across the circuit is the sum of the voltages throughout every issue. In a parallel circuit, the voltage across every one of the components is equal, and the total cutting edge is the sum of the currents via each element.

Learn more about parallel circuits here:-https://brainly.com/question/12069231

#SPJ1

Answer: As a solution is diluted, the absorbance of the solution is decreased

Explanation: As a solution is diluted, the absorbance of the solution is decreased. The concept of dilution relates molar concentration and volume.M1V1=M2V2. If a 1.0 liter of a 1.0 molar solution is diluted to 2.0 molar solution, the new molar concentration is 0.50. The new concentration has been reduced by one half as the volume was doubled.Beer's law relates the concept of concentration and absorbance. According to this law, absorbance and concentration are directly proportional. If you increase the original concentration, the absorbance increases and if you dilute the solution(which means you decrease the original concentration), the absorbance will decrease in direct proportion. ;)

According to the Beer's law the absorbance of solution is directly proportional to concentration,hence on dilution  the concentration decreases which decreases absorbance on a whole.

The Beer's law states that  the absorbance is directly proportional to the concentration of a solution that is,A∝C .Most substances follow Beer's law  from low to moderate temperature ranges only.It is not followed well in case of saturation effects  which are present in highly concentrated samples.

Due to the direct relation between absorbance and concentration , absorbance is preferred over transmittance for recording the spectra.

Learn more about Beer's law,here:

https://brainly.com/question/13164744

#SPJ1

Answer:

wow I can't believe you. your cheating I'm giving you a f on this. unless you tell me in front of the class that you cheated. I'm joking man but seriously I don't know

The solution that is a buffer is a solution that is 0.100 M in HNO₂ and 0.100 M in NaNO₂  .

A weak acid and its conjugate base, or a weak base and its conjugate acid, must be combined to create a buffer solution. Only HNO2 (Weak Acid) and NaNO2 are included in the list as an acid and its conjugate base (Conjugate Base). Given that all concentrations are equivalent, the pH of this solution would be the same as the pKa of HNO2 (3,15).

Acids that don't entirely dissociate in solution are referred to as weak acids. In other words, any acid that is not a strong acid qualifies as a weak acid. The amount of dissociation determines how strong an acid is; the more dissociation, the stronger the acid.

To learn more about weak acid visit:https://brainly.com/question/12811944

#SPJ4

Answer:

A + B = C reaction decreases as time passes and the reactants get used up. r = -kAB during reaction A converts 2x while B converts x to form 3x of C let's say y = C y = 3x amount of reactants not converted yet , for A: 100 - 2x for B: 50 - x variatio

Explanation: