Which element in group 17 has the highest ionization energy

Answers

Answer 1

Answer:

fluorine

Explanation:

it has the highest electronegativity in the group and in the periodic table


Related Questions

Which statement about Niels Bohr's atomic model is true?
O Higher orbits have lower energies.
O Each orbit has a specific energy level.
O Electrons can exist in any energy level.
O Orbits close to the nucleus have no energy.

Answers

Answer:

O Each orbit has a specific energy level.

Explanation:

Neils Bohr put forward his own model of the atom based on the quantum mechanics originally developed by Planck.

He assumed the Rutherford's model and suggested that the extranuclear part consists of electrons in specific spherical orbits around the nucleus.

The orbits/energy level are the permissible through which the electrons can move through.

His concept is based the concept that the electron can move round the nucleus in certain permissible orbitss

How can the IR spectrum be used to show that there is not starting material left and the products are alcohols

Answers

Answer:

hello your question is incomplete attached below is the complete question

answer :

Absence of c = c = C-H of the peak and the presence of -O-H and C-O peak shows that there is presence of Alcohols as products and it also shows that there is no starting material left

Explanation:

To provide that there is no starting material left and products are alcohols using the IR spectrum we will apply hydroboration oxidation

Absence of c = c = C-H of the peak and the presence of -O-H and C-O peak shows that there is presence of Alcohols as products and it also shows that there is no starting material left

attached below is the detailed solution

2. According to the U.S. government, 4.9 billion barrels of crude oil flowed into the Gulf of Mexico following the explosion that destroyed the Deepwater Horizon drilling rig in April 2010. Express this volume of crude oil in liters and in cubic kilometers​

Answers

In September 2014, a U.S. District Court judge ruled that BP was primarily responsible for the oil spill because of its gross negligence and reckless conduct. In July 2015, BP agreed to pay $18.7 billion in fines, the largest corporate settlement in United States history.

Methyl salicylate is a common active ingredient in liniments such as ben-gay. It is also known as oil of wintergreen. It is made up of carbon, hydrogen, and oxygen atoms. When a sample of methyl salicylate weighing 5.287 g is burned in excess oxygen, 12.24 g of carbon dioxide and 2.505 g of water are formed. What is the simplist formula for oil of wintergreen

Answers

Answer: The empirical formula is [tex]C_3H_3O[/tex].

Explanation:

The chemical equation for the combustion of hydrocarbon having carbon, hydrogen and oxygen follows:

[tex]C_xH_yO_z+O_2\rightarrow CO_2+H_2O[/tex]

where, 'x', 'y' and 'z' are the subscripts of Carbon, hydrogen and oxygen respectively.

We are given:

Mass of [tex]CO_2[/tex] = 12.24 g

Mass of [tex]H_2O[/tex] = 2.505 g

Molar mass of carbon dioxide = 44 g/mol

Molar mass of water = 18 g/mol

For calculating the mass of carbon:

In 44g of carbon dioxide, 12 g of carbon is contained.

So, in 12.24 g of carbon dioxide, =[tex]\frac{12}{44}\times 12.24=3.338g[/tex] of carbon will be contained.

For calculating the mass of hydrogen:

In 18g of water, 2 g of hydrogen is contained.

So, in 2.505 g of water, =[tex]\frac{2}{18}\times 2.505=0.278g[/tex] of hydrogen will be contained.

Mass of oxygen in the compound = (5.287) - (3.338+0.278) = 1.671  g

Step 1 : convert given masses into moles.

Moles of C =[tex] \frac{\text{ given mass of C}}{\text{ molar mass of C}}= \frac{3.338g}{12g/mole}=0.278moles[/tex]

Moles of H=[tex]\frac{\text{ given mass of H}}{\text{ molar mass of H}}= \frac{0.278g}{1g/mole}=0.278moles[/tex]

Moles of O=[tex]\frac{\text{ given mass of O}}{\text{ molar mass of O}}= \frac{1.671g}{16g/mole}=0.104moles[/tex]

Step 2 : For the mole ratio, divide each value of moles by the smallest number of moles calculated.

For C =[tex]\frac{0.278}{0.104}=3[/tex]

For H =[tex]\frac{0.278}{0.104}=3[/tex]

For O =[tex]\frac{0.104}{0.104}=1[/tex]

The ratio of C : H : O = 3: 3: 1

Hence the empirical formula is [tex]C_3H_3O[/tex].

3.4 x 10-25 kg = ? microounces

Answers

Answer: 1.2 x 10^-17 microounces

Explanation:

Ounce = 28.5G microounce = 28.5*10^-6g

3.4*10^-25 kg = 3.4*10^-22 g = (3.4/2.85)*10^(-22+5) = 1.2*10-17

Write a mechanism for the esterification of propanoic acid with 18O-labeled ethanol. Show clearly the fate of the 18O label. (b) Acid-catalyzed hydrolysis of an unlabeled ester with 18O-labeled water (H218O) leads to incorporation of some 18O into both oxygens of the carboxylic acid product. Explain by a mechanism. (Hint: You must use the fact that all steps in the mechanism are reversible.)

Answers

Answer:

See explanation and images attached

Explanation:

a) In the mechanism for the acid catalysed esterification of propanoic acid using ethanol, we can see that the first step is the protonation of the acid followed by nucleophillic attack of the alcohol. Loss of water and consequent deprotonation regenerates the acid catalyst. We can see the fate of the 18O labelled ethanol in the mechanism shown.

b)  In the second mechanism, an unnamed ester is hydrolysed using an acid catalyst. The attack of the acid and subsequent nucleophillic attack of water labelled with 18O leads to the incorporation of this 18O into the product acid as shown in the mechanism attached to this answer.

3.
What do we call materials
that let heat pass through
them easily?
Thermal conductors
Thermal insulators
Transparent

4.
Which of these is a good
thermal conductor?
Plastic
Wood
Steel

5.
Which of these is a good
thermal insulator?
Steel
Iron
Polystyrene

6.
To save on heating bills, do
you think the roof of a
building should be lined with...
a thermal conductor
a thermal insulator
nothing

7.
How does heat travel?
From cold things to hotter things
From hot things to colder things
Between things of the same temperature

Answers

Answer:

thermal conductors

steel

polystyrene

thermal insulator

between things of the same temp?

sorry to ask but if its ok with you, may i get brainly, i need to rank up all i need is two more, if not its fine. thank you and yours truly golden

If a gold ring weighs 25 grams. How much energy in Joules would it take to get it to reach its melting point if the ring starts out at 75 degrees C? (melting point is 1064 C, Cp for gold is .129 J/g-C.

Answers

Answer:

3.2 × 10³ J

Explanation:

Step 1: Given data

Mass of the gold ring (m): 25 gSpecific heat capacity of gold (Cp): 0.129 J/g.°CInitial temperature: 75 °CFinal temperature: 1064 °C

Step 2: Calculate the temperature change (ΔT)

ΔT = 1064 °C - 75 °C = 989 °C

Step 3: Calculate the energy required (Q)

We will use the following expression.

Q = Cp × m × ΔT

Q = 0.129 J/g.°C × 25 g × 989 °C

Q = 3.2 × 10³ J

Consider the following chemical equilibrium:
NH4SH(s) ⇌ H2SgNH3(g) Now write an equation below that shows how to calculate Kp from Kc for this reaction at an absolute temperature T. You can assume T is comfortably above room temperature. If you include any common physical constants in your equation be sure you use their standard symbols, found in the ALEKS Calculator.

Answers

Answer:

See explanation below

Explanation:

First, let's write the reaction:

NH₄SH(s)   <------> H₂S(g) + NH₃(g)

The reaction is already balanced so we don't need to do anything else.

Second, let's take into account the following. The Kc expression for this reaction, only compounds in gaseous state are the only ones that contribute to the equilibrium. Solid and liquid do not contribute to the Kc expression. This is because solid and liquid have a constant concentration near to 1, so, it won't do any difference.

Knowing this, the Kc expression for this reaction is:

Kc = [H₂S] [NH₃]

Now, to calculate Kp from Kc, there's an expression that helps a lot to do this. The expression is the following:

Kp = Kc (RT)ᵃⁿ    (1)

Where:

R: universal constant of gases

T: Temperature in K

ᵃⁿ = difference of the coefficients of the reaction.

This expression comes from the fact that Kp is an expression that instead of working with concentrations, it works with pressure.

If we use the ideal gas equation we have:

PV = nRT

Solving for P:

P = nRT/V        and C = n/V   so

P = CRT

If we now replace this, in the Kp expression of equilibrium we have:

Kp = pH₂S * pNH₃

Kp = ([H₂S]RT)¹ ([NH₃]RT)¹

Kp = (RT)¹⁺¹ ([H₂S] [NH₃])

Kp = (RT)²Kc

So finally the expression for Kp would be:

Kp = Kc (RT)²

Hope this helps

Nitrogen dioxide (NO2) is a toxic gas produced by cars and factories. If a car produces one mole of NO2 during a 10 mile drive, how many grams of nitrogen dioxide are produced?

Answers

Answer:

Explanation:

molecular weight of NO₂ is 14 + 2 x 16 = 46

So one mole of nitrogen dioxide will have mass of 46 grams .

How many grams of Mo2(S04)3 are in 5.35X10 22 molecules of Mo2 (SO4)3?​

Answers

Answer:

42.658

Explanation:

1) Avogadro's number is: N(A)=6.02*10²³

2) M of (Mo₂(SO₄)₃)=96*2+96*3=480 (gr/mol);

3) if N(A) ~ 1 mol of (Mo₂(SO₄)₃), tnen 5.35*10²² ~

(5.35*10²²)/(6.02*10²³)≈0.0888 mol of (Mo₂(SO₄)₃);

4) m(Mo₂(SO₄)₃)=M(Mo₂(SO₄)₃)*0.0888;

m((Mo₂(SO₄)₃)=480*0.0888=42.658 (gr)

Draw the structure(s) of the major organic product(s) of the following reaction. 1. lithium diisopropylamide / hexane 2. 1 eq. CH3I You do not have to consider stereochemistry. Omit products derived from the acidic or basic reagent itself, e.g. HN(i-Pr)2 derived from N(i-Pr)2-. If no reaction occurs, draw the organic starting material. If substantial starting material is present at the end of the reaction, include it in the products. Draw one structure per sketcher. Add additional sketchers using the drop-down menu in the bottom right corner. Separate structures with signs from the drop-down menu.

Answers

Answer:

See explanation below

Explanation:

You are not providing the starting material, however, I manage to find a similar question to this, so I'm gonna use it as a basis to help you answer yours.

Now let's analyze what is happening in the reaction so we can predict the final product.

We have a ketone here, reacting at first with LDA. This is a very strong base that is commonly used in reactions with ketones and aldehydes to promove a condensation. To do this, as LDA is a strong base it will occur firts an acid base reaction, substracting the most acidic hydrogen in the molecule (Which in this case, is the Beta hydrogen of the carbonile). This will cause an enolate formation.

Then, this enolate will react with the CH3I and form a new product. The final result would be a ketone with a methyl group now attached. In the picture 2, you have the mechanism and final product.

Hope this helps

Based on the following chemical equation how many molecules of Hydrogen (H) are present in the reactants side?

2H2 + O2 ----> 2H2O
Question 1 options:


1


2


3


4

Answers

Answer:

2

Explanation:

Based on the chemical equation, the number of molecules of hydrogen gas in the reactant side is 2.

This is indicated by the coefficient before reactant.

A molecule is a covalent compound that has discrete or separate units.

So H₂ is made up of two atoms of hydrogen that has been covalently bonded together by sharing their valence electrons.

From the reaction expression:

   2 molecules of hydrogen gas combines with 1 molecule of oxygen gas to produce 2 molecules of water.

Rank the following elements by electron affinity, from most positive to most negative EA value.
Rank from most positive to most negative. To rank items as equivalent, overlap them.
bromine
sodium
tellurium
helium
phosphorus

Answers

Answer:

Explanation:

Bromine >Tellurium > Phosphorus > Helium > Sodium

Electron affinity of Bromine , Tellurium , Phosphorus are positive , of helium is zero and of sodium is negative .

Aniline, consists of carbon, hydrogen, and nitrogen. Combustion of this yields CO2, H20, and N2 as products. If the combustion of 12.5 g of aniline yields 7.1 grams of H2O, and 1.48 grams of N2, what is its empirical formula? [HINT: write out a chemical equation, consider law of conservation of mass, and then think about what percent hydrogen is in water]

A. CHN
B. C2H4N8
C. C16H15N2
D. C20H15N31

Answers

The empirical formula : C. C₁₆H₁₅N₂

Further explanation

Given

12.5 g of aniline

7.1 grams of H2O

1.48 grams of N2

Required

The empirical formula

Solution

Reaction :

mass H in H₂O :

= 2.1/18 x 7.1 g

= 0.79

mass N = 1.48

mass C :

= 12.5 g-(mass H+mass N)

= 12.5 - (0.79+1.48)

= 10.23

Mol ratio C : H : N =

= 10.23/12 : 0.79/1 : 1.48/14

= 0.853 : 0.79 : 0.106

= 8 : 7.5 : 1

= 16 : 15 : 2

What does not affect the strength of an electromagnet?

Answers

Answer:

Unlike a permanent magnet, an electromagnet can be turned on and off using electrical current. Many variables affect the strength of this electromagnet, and there are some variables that do not affect the strength. ... Making the nail longer will not make the magnet stronger, unless you also add more turns to the coil.

electromagnet can be turned on and off using electrical current. Many variables affect the strength of this electromagnet, and there are some variables that do not affect the strength

Joseph Priestly is frequently credited with the discovery of oxygen, and was reported to have produced molecular oxygen from the decomposition reaction of mercury(II) oxide, which is the reverse of the synthesis of HgO depicted in the following equation. 4 Hg(l) + 2 O2(g) LaTeX: \rightarrow → 4 HgO(s) Determine the value of LaTeX: \Delta ΔH°rxn for the synthesis, given that

Answers

Joseph Priestly is frequently credited with the discovery of oxygen, and was reported to have produced molecular oxygen from the decomposition reaction of mercury(II) oxide, which is the reverse of the synthesis of HgO depicted in the following equation. [tex]4Hg(l)+2O_2(g)\rightarrow 4 HgO(s) [/tex]Determine the value of [tex]\Delta ΔH°rxn[/tex] for the synthesis, given that [tex]\Delta H_f^0[/tex] for HgO is -90.7 kJ/mol.

Answer: The enthalpy change for this reaction is, -362.8 kJ

Explanation:

The balanced chemical reaction is,

[tex]4Hg(l)+2O_2(g)\rightarrow 4HgO(s)[/tex]

The expression for enthalpy change is,

[tex]\Delta H=\sum [n\times \Delta H_f(product)]-\sum [n\times \Delta H_f(reactant)][/tex]

[tex]\Delta H=[(n_{HgO}\times \Delta H_{HgO})]-[(n_{O_2}\times \Delta H_{O_2})+(n_{Hg}\times \Delta H_{Hg})][/tex]

where,

n = number of moles

[tex]\Delta H_{O_2}=0[/tex] (as heat of formation of substances in their standard state is zero

[tex]\Delta H_{Hg}=0[/tex] (as heat of formation of substances in their standard state is zero

Now put all the given values in this expression, we get

[tex]\Delta H=[(4\times -90.7)]-[(2\times 0)+(4\times 0)][/tex]

[tex]\Delta H=-362.8kJ[/tex]

Therefore, the enthalpy change for this reaction is, -362.8 kJ

A 2.0% (w/v) solution of sodium hydrogen citrate, Na2C6H6O7, which also contains 2.5% (w/v) of dextrose, C6H12O6, is used as an anticoagulant for blood which is to be used for transfusions. What is the molarity of the sodium hydrogen citrate in the solution

Answers

Answer:

0.0847M is molarity of sodium hydrogen citrate in the solution

Explanation:

The 2.0%(w/v) solution of sodium hydrogen citrate contains 2g of the solute in 100mL of solution. To find the molarity of the solution we need to convert the mass of solute to moles using molar mass and the mL of solution to Liters because molarity is the ratio between moles of sodium hydrogen citrate and liters of solution.

Moles Na2C6H6O7:

Molar Mass:

2Na: 2*22.99g/mol: 45.98g/mol

6C: 6*12.01g/mol: 72.01g/mol

6H: 6*1.008g/mol: 6.048g/mol

7O: 7*16g/mol: 112g/mol

45.98g/mol + 72.01g/mol + 6.048g/mol + 112g/mol = 236.038g/mol

Moles of 2g:

2g * (1mol / 236.038g) = 8.473x10⁻³ moles

Liters solution:

100mL * (1L / 1000mL) = 0.100L

Molarity:

8.473x10⁻³ moles / 0.100L =

0.0847M is molarity of sodium hydrogen citrate in the solution

Answer:

0.085M

Explanation:

Molecular weight of sodium hydrogen citrate=236.09 g

236.09 g of Na2C6H6O7 in 1000ml= 1 M

2%= 2 g in 1 litre (1000ml)

20/236.09=0.0847 M=0.085 M

Temperature can weather rocks because A heat can cause minerals to oxidize B. most rocks do not absorb heat evenly C. water contracts when it freezes D. rocks usually melt in the hot sun​

Answers

Answer:

b

Explanation:

it is not c because water expands when it freezes.

how far does light travel in 3.0 days

Answers

Answer:

[tex]d=7.77\times 10^{13}\ m[/tex]

Explanation:

We know that the speed of light is equal to [tex]3\times 10^8\ m/s[/tex]

We need to find how far the light travel in 3 days.

Speed of an object is equal to distance covered divided by time taken.

Also, 1 day = 86400 s

3 days = 259200 s

So,

[tex]d=vt[/tex]

[tex]d=3\times 10^8\times 259200\\\\d=7.77\times 10^{13}\ m[/tex]

So, the light will travel [tex]7.77\times 10^{13}\ m[/tex] in 3 days.

Joaquin tells his science class that galaxies consist of gas, dust, and many planets. What is the most important component of galaxios Joaquin is missing in his description?
astero de
comets
constellations
Stars

Answers

Answer:

the answer is asteroids!

Explanation:

Answer:

astroid

Explanation:

becaus

Question 4 of 10
What form of the ideal gas law would you use to calculate the temperature of
a gas?
O A. Ta
B. Y =
C. P = nRT
D. n =
RT​

Answers

Answer:

C. P = nRT

Explanation:

PV = nRT, where n is a number of moles and R is the universal gas constant, R = 8.31 J/mol ⋅ K.

Hope this helps :)

Answer:T =PV/nR

Explanation:

An unknown object has a mass of 150 grams and a volume of 5 cm3. What is the density of this
object?

Answers

The answer is 30 cm3
I hope this help you !!

Answer:

1.2 cm

Explanation:

The reason how I got my answer is by dividing 150 by 125 and that gave me 1.2 cm.

which statements best describe measuring with a graduated cylinder?

Answers

what are the statements?

How many moles of sodium are present in 17 g of Na?

What is the number of moles in 60g of Na2SO4?

How many moles are there in 93.5g of CO2?

How many moles are there in 25.6g of Sodium Nitrate?

Determine the number of particles in .75 mol of calcium hydroxide

Answers

Answer:

1. 0.74mol

2. 0.42mol

3. 2.125mol

4. 0.301mol

5. 4.52 × 10^23 particles

Explanation:

Number of moles (n) in a substance can be found using the formula:

mole (n) = mass/molar mass

Using this formula, the following moles are calculated:

1. Molar of Na = 23g/mol

mole = 17/23

mole = 0.74mol

2. Molar mass of Na2SO4 = 23(2) + 32 + 16(4)

= 46 + 32 + 64

= 142g/mol

Mole = 60/142

mole = 0.42mol

3. Molar mass of CO2 = 12 + 16(2)

= 12 + 32

= 44g/mol

mole = 93.5/44

mole = 2.125mol

4. Molar mass of sodium nitrate (NaNO3) = 23 + 14 + 16(3)

= 23 + 14 + 48

= 85g/mol

mole = 25.6/85

mole = 0.301mol

5. Number of particles in one mole of a substance is 6.022 × 10^23 particles. Hence, in 0.75mol of calcium hydroxide (Ca(OH)2, there will be;

0.75mol × 6.02 × 10^23

= 4.515 × 10^23

= 4.52 × 10^23 particles

Will liquid with higher density be more or less buoyant?

Answers

Answer:

Explanation:

if it has a lower density than the liquid it's in will float

At 25.0°C the Henry's Law constant for dinitrogen monoxide (N2O) gas in water is 0.025 M/atm.
Calculate the mass in grams of N2O gas that can be dissolved in 325. mL of water at 25.0°C and a N2O partial pressure of 0.69 atm.
Be sure your answer has the correct number of significant digits.

Answers

Answer:

The mass in grams of N₂O gas that can be dissolved is 0.18 g

Explanation:

The solubility of a gas is proportional to the partial pressure of that gas, over a determined solvent. That's what Henry's law states. We see the formula:

S = K . Pp

Where S is solubility and K is Henry's constant. This specific for each gas and each temperature, while Pp means partial pressure.

We replace data:

S = 0.025 M/atm .  0.69atm

S = 0.01725 M

This is the solubility of the gas, so now, we need to know what mass of gas is solubilized. We convert the moles, with the volume of water.

0.01725 mol/L . 0.235 L = 4.05×10⁻³ moles

Now, we determine the mass in grams:  4.05×10⁻³ mol . 28 g / 1mol =

0.1782 g

A particle that travels around the nucleus of an atom in orbitals is called a(n)

Answers

Answer: electrons

Explanation:

Answer: It is called an electron because it is attracted to the positively charged particales called protons in the center of the atom.

Explanation:

100 POINTS FOR BEST ANSWER! What is the difference between LDOF and SDOF

Answers

An SDOF system is one whose motion is governed by a single, second-order differential equation. Only two variables, position and velocity are needed to describe the trajectory of the system. Many structures can be idealized as single degree-of-freedom systems.

The LDAP Data Interchange Format is a standard plain text data interchange format for representing LDAP directory content and update requests. LDIF conveys directory content as a set of records, one record for each object.

This diagram is attempting to compare the sizes of the four inner planets. What is wrong with this diagram?

Answers

Answer:

points

Explanation:

Answer:

Where is the diagram?

Explanation:

..........................

Other Questions
an = -15 + 5(n 1)Find the 21st term of the sequence. If the Legislative branch can create courts what is this Ifcalled? As the radius of a star increases, how do you think its mass might change? HURRY ILL GIVE BRAINLIEST.!!!!! Drag each label to the correct location on the table. Each label can be used more than once, but not all labels will be used.Simplify the given polynomials. Then, classify each polynomial by its degree and number of terms.Polynomial 1: (1 - 1)(61 + 2)Polynomial 2: (712 + 32) (21.32 12)Polynomial 3: 4(5.12 95 + 7) + 2(-10x2 + 185 13)26.12 + 21 - 1612 - I - 1trinomiallinearconstant6binomialPolynomialSimplified FormName byDegreeName byNumber of Terms1612 - I - 1quadratic23.0 + 432monomialResetNext What is the correct answer? What problem is HTTP solving? I NEED HELP. This id due in 2 hours, i dont get it pls help me. THis is worst 60% of my grade make sure its correct pls and thanks The length of a rectangular room is 7.3 feet longer than the width, x, of the room. Which expression represents the perimeter of the room? PLEASE ANSER FAST!! Leah is buying a new couch that regularly costs $699, but is on sale for 10% off. She also has to pay a 7% sales tax on her purchase. Which expression could Leah use to calculate the final price of the couch?699(1.10)(1.07)699(1.10)(0.93)699(0.90)(0.93)699(0.90)(1.07) In coffee, cherry picking, the process of ________picking is the practice of harvesting only the ripe coffee cherries. What is the solution to the equation: 2x-5 = -x+7 A: x=4B: x=12C: x=2D: x=-4 Can someone help me (7th grade science) need to be done as sonn as possible What is 3/4 divided 1/2 What are the zeros of the quadratic equation y=5(2x1)(x+3)? explain the steps to solve the word problem over similar figures. John made a scale model of a car. The car has an actual height of 25 feet. Johns model used a scale in which 1 inch represents 10 feet. What is the height in inches of Johns model? How does the statement Turn out! And learn your duty in the poster appeal to pathos? It appeals to the audiences sense of logic by suggesting that turning out is the correct choice. It appeals to the audiences belief that the poster is a trustworthy source of information It appeals to the audiences values by suggesting turning out is their job. 5( 3+7) =Distributive property solving? WILL MARK BRAINLEST Which contribution of the Maya used tree bark to keep track of rituals? (4 points)Group of answer choicesObservatoriesStepped pyramidsCodicesStelae Explain whether the following statement is true or false. The function notation f-1(x) means 1/f(x) 4y=x+8 pls answer hurry up pls