The question is in complete, the complete question is:
Which element has an outer electron configuration of s 2 p4 ?
(A) Ca (B) Cr (C) Ge (D) Se
Answer:
(D) Se
Explanation:
The outer electronic configuration of an atom reflects the group to which it belongs in the periodic table. Each group has its unique outermost electron configuration and number of electrons found in the outermost shell of the atoms of elements in the group.
s 2 p4 is the unique outermost electron configuration of group 16 elements. Group 16 elements have six electrons in their outermost shell. If we consider the options, only Se is a member of group 16. Hence it is only Se that has the outermost electron configuration s 2 p4 .
An element which has an outer (ending) electron configuration of [tex]s^2p^4[/tex] is: Oxygen.
Electron configuration can be defined as a formula that is used to denote the distribution of the atoms of a chemical element in an atomic orbital.
Basically, electron configuration uses four (4) main letters to illustrate the distribution of atoms in an atomic orbital:
spdfThe electron configuration of [tex]s^2p^4[/tex] indicates that the chemical element is in Group 6 and has six (6) electrons in its outermost shell.
Hence, a chemical element such as Oxygen (O) or Selenium (Sn) in Group 6 of the periodic table would have an electron configuration of [tex]s^2p^4[/tex].
Read more: https://brainly.com/question/18214726
What is the temperature, in degrees Celsius, of a 10.5 grams sample of Neon gas confined to a volume of 2.50 L at a pressure of 1.00 atm.
Answer:
–215 °C
Explanation:
From the question given above, the following data were obtained:
Mass of Ne = 10.5 g
Volume (V) = 2.50 L
Pressure (P) = 1 atm
Temperature (T) =?
Next, we shall determine the number of mole present in 10.5 gof Neon, Ne. This can be obtained as follow:
Mass of Ne = 10.5 g
Molar mass of Ne = 20 g/mol
Mole of Ne =.?
Mole = mass /Molar mass
Mole of Ne = 10.5 / 20
Mole of Ne = 0.525 mole
Next, we shall determine the temperature of the sample of Neon, Ne. This can be obtained as follow:
Volume (V) = 2.50 L
Pressure (P) = 1 atm
Number of mole (n) = 0.525 mole
Gas constant (R) = 0.0821 atm.L/Kmol
Temperature (T) =?
PV = nRT
1 × 2.5 = 0.525 × 0.0821 × T
2.5 = 0.525 × 0.0821 × T
Divide both side by 0.525 × 0.0821
T = 2.5 / (0.525 × 0.0821)
T = 58 K
Finally, we shall convert 58 K to degree celsius (°C). This can be obtained as follow:
T(°C) = T(K) – 273
T(K) = 58 K
T(°C) = 58 – 273
T(°C) = –215 °C
Thus, the temperature of the sample of Neon gas is –215 °C.
At what time was the frog sitting still or at rest
Answer:
What are the times and is that your question?
Explanation:
In a certain chemical reaction, the bond energy of the products is 67 kJ and
that of the reactants is 52 kJ. Because energy is conserved, how much
potential energy does the system release or absorb?
O A. The reaction uses up 15 kJ of energy from the reaction system.
B. The reaction creates 15 kJ of energy when bonds form.
C. The reaction system absorbs 15 kJ of energy from the
surroundings.
O D. The surroundings absorb 15 kJ of potential energy.
D. The surroundings absorb 15 kJ of potential energy.
Further explanationChemical bonds = potential energy
ΔH reaction from bond energy is a breaking and forming reaction of the 2 reacting molecules
Can be formulated:
ΔH rxn = ∑ the energy of the reagent bonds broken - ∑ the energy of the bonds formed by the product
The bond energy of the products is 67 kJ and reactants 52 kJ
[tex]\tt \Delta H_{rxn}=52-67=-15~kJ[/tex]
ΔH = negative ⇒The reaction is exothermic(releases heat to surrounding)
Answer:
C is right
Explanation:
What is conduction?
Transfer of heat through circular movement
Transfer of heat through direct physical contact
Transfer of heat through electromagnetic waves
Transfer of heat through the movement of part
Answer:
Transfer of heat through direct physical contact
Explanation:
The meaning of conduction is the transfer of heat directly transmitted through a substance when there is the difference between temperature and electrical potential. Hope it helps!
Answer:
B
Explanation:
Help me lol
I’ll give branliest if two people answer
Answer:
I think all of the above
Explanation:
Put as brainliest if you wish
What is epithelial tissue characterized by?
closely packed cells
sarcomeres
many cell junctions
an extracellular matrix
Answer:
closely packed cells
many cell junctions
Explanation:
Answer:
A,B
Explanation:
EDGE2021
How many elements are in H2CrO4
Answer:
3 elements
Explanation:
The elements are:
- Chromium
- Hydrogen
- Oxygen
Two pieces of paper are stapled together.
Answer:
This is physical not chemical because a chemical example would be boiling water over the stove.
Explanation:
The thermite reaction occurs when iron(III) oxide reacts with solid
aluminum. The reaction is so hot that molten iron forms as a product.
>
Fe2O3(s) + Al(s) → Fe(C) + Al2O3(s)
What mass of aluminum should be used in order to completely
consume 10.0 g Fe2O3(s)? If the reaction described produces 5.3 g
Al2O3(s), what is the percent yield?
Answer:
[tex]m_{Al}=3.38gAl[/tex]
[tex]Y=83.1\%[/tex]
Explanation:
Hello.
In this case, for the given balanced reaction:
[tex]Fe_2O_3(s) + 2Al(s)\rightarrow 2Fe(s) + Al_2O_3(s)[/tex]
For 10.0 g of iron (III) oxide (molar mass = 160 g/mol), based on the 1:2 mole ratio with Al (atomic mass = 27 g/mol), the required mass is then:
[tex]m_{Al}=10.0gFe_2O_3*\frac{1molFe_2O_3}{160gFe_2O_3} *\frac{2molAl}{1molFe_2O_3} *\frac{27gAl}{1molAl} \\\\m_{Al}=3.38gAl[/tex]
Moreover, as 5.3 g of aluminum oxide are actually yielded, from the 10.0 g of iron (III) oxide, we can compute the theoretical mass of aluminum oxide (molar mass = 102 g/mol) via their 1:1 mole ratio:
[tex]m_{Al_2O_3}=10.0gFe_2O_3*\frac{1molFe_2O_3}{160gFe_2O_3} *\frac{1molAl_2O_3}{1molFe_2O_3} *\frac{102gAl_2O_3}{1molAl_2O_3} \\\\m_{Al_2O_3}=6.38gAl_2O_3[/tex]
Thus, the percent yield (actual/theoretical*100%) turns out:
[tex]Y=\frac{5.3 g}{6.38 g}* 100\%\\\\Y=83.1\%[/tex]
Best regards.
Convert 5.4g of NaCl to moles
Answer:
.0924 moles of NaCl
Explanation:
So you know you have 5.4 g of NaCl and you need to know how many moles there are in this amount of NaCl
You'll need to find the atomic mass of the compound NaCl to help you solve for moles Sodium (Na) on the periodic table has a mass of 22.99 Chlorine (Cl) on the periodic table has a mass of 35.45Add these two together----> 22.99 + 35.45 = 58.44
Now you can calculate for moles
Written-out method:
5.4 grams of NaCl | 1 mole of NaCl
| 58.44 grams NaCl = .0924 moles of NaCl
Plug into calculator method:
(5.4 g of NaCl/ 58.44g NaCl= .0925 moles)
Which statements about exothermic and endothermic reactions are correct? (its a multiple choice question)
1 During an exothermic reaction, heat is given out.
2 The temperature of an endothermic reaction goes up because heat is taken in.
3 Burning methane in the air is an exothermic reaction.
A) 1.2 and 3
B) 1 and 2 only
C) 1 and 3 only
D) 2 and 3 only
Answer:
C)1 and 3 only☺️
Explanation:
PLS HELP ITS URGENT
Some plant cells need energy to carry nutrients across the cell membrane. Which type of energy transformation does these plant cells use to bring the nutrient molecule inside the cell membrane?
thermal energy to kinetic energy
potential energy to light energy
chemical energy to kinetic energy
kinetic energy to potential energy
Answer:
Answer
The answer is option 4
The energy transformation during nutrients transportation across the cell membrane is transformation from chemical energy to kinetic energy, where the uphill and downhill movements of molecules based on concentration gradient carries the whole process.
What is energy transformation?The total energy in a system is always conserved. However, one form of energy can be transformed into another form. For example we uses electrical devices such as bulbs fan etc, wherever the energy transformation is getting way from electrical energy to light or mechanical energy.
In plant cells nutrient molecules and ions are balanced inside and outside the cell and hence they are transported across the cell membrane by a concentration gradient with a chemical energy produced by the molecules.
The chemical energy inside of the ions and molecules converts to kinetic energy to transport itself through downhill and uphill mechanisms with aid of various enzymes and electron channels.
To find more on energy transformation, refer here:
https://brainly.com/question/29102331
#SPJ6
An object with a mass of 15 kg has an acceleration of 3 m/s/s. What is the force
applied to the object? *
45 N
5N
18 N
Answer:
45N
Explanation:
force=mass×acceleration
What is the same on the left and right side of a balanced equation? Explain your answer.
Answer:
Number of atoms of elements are same on left and right side of balance equation.
Explanation:
Every chemical reaction must follow the law of conservation of mass. According to which mass can neither be created nor destroy but it change from one to another form. It means mass remain conserved. That is why we need to balance the chemical equation because mass remain same on both side of equation. Consider the example,
Chemical equation:
N₂ + H₂ → NH₃
We can see that nitrogen and hydrogen react with each other and from ammonia. We need to balance the equation to have equal amount on both side.
Balance chemical equation:
N₂ + 3H₂ → 2NH₃
It means mass remain same but change from one to another form.
A balanced equation is one that is having a chemical reaction where the numbers of atoms. Here the number of elements in each reaction and the total charges are the same. This includes both the reactant and the product.
However, the mass and charge are balanced on both sides of the reaction. Hence the left and the right side is always equal to the number of atoms. Thus the chemical reaction is a balance of atoms involved in the reaction.Learn more about the same on the left and right sides of a balanced equation.
brainly.ph/question/20750343.
When iron reacts with oxygen, it forms iron oxide, or rust.
4 Fe + 3 O2 2 Fe2O3
If 112 g of iron (Fe) combines with 24 g of oxygen (O2), how much iron oxide is formed?
Answer:
Mass of iron oxide: 79.85 g
Explanation:
Given data:
Mass of iron = 112 g
Mass of O₂ = 24 g
Mass of iron oxide formed = ?
Solution:
4Fe + 3O₂ → 2Fe₂O₃
Number of moles of Fe:
Number of moles = mass/ molar mass
Number of moles = 112 g/ 55.85 g/mol
Number of moles = 2 mol
Number of moles of O₂:
Number of moles = mass/ molar mass
Number of moles = 24 g/ 32 g/mol
Number of moles = 0.75 mol
Now we will compare the moles of oxygen and iron with iron oxide.
Fe : Fe₂O₃
4 : 2
2 : 2/4×2 = 1
O₂ : Fe₂O₃
3 : 2
0.75 : 2/3×0.75 = 0.5
The number of moles of iron oxide formed by oxygen are less thus it will be limiting reactant.
Mass of iron oxide:
Mass = number of moles × molar mass
Mass = 0.5 mol × 159.69 g/mol
Mass = 79.85 g
Answer:
136 g Fe2O3
Explanation:
study island
What would happen if I throw nail polish remover into the fireplace
Answer:
Your house could catch fire because while Nail Polish Remover itself isn't particularly flammable, the vapors it gives off are. Because of this, sparks could occur if nail polish is used near open flame or was tossed in, and then the sparks could catch onto something else and grow. I would not recommend trying this.
Explanation:
2. How does friction effect speed?
Answer:
It acts as a force upon it like in newtons first law of motion an object in motion will stay in motion until a force acts upon it So friction bascicallly slows it down or stops it completly
Explanation:
an atom has 79 protons, 78 electrons and a mass number of 118. how many neutrons does this atom have
Answer:
39
Explanation:
Electrons weigh almost nothing, so their mass doesn't really matter for these types of problems. Just subtract 118-79 to find the remaining mass which is for the neutrons.
compare and contrast solids liquids and gases in terms of volume shape compessibility and energy
Answer:
solid has definite shape and volume.
liquid do not have definite shape but have definite volume.
gas do not have definite shape and definite volume.
solid have lowest compressibility out of three, liquid have more compressibility than solid but less than gases. gases have the highest compressibility out of three. Molecules in the solid phase have the least amount of energy, while gas particles have the greatest amount of energy. The temperature of a substance is a measure of the average kinetic energy of the particles.
Calculate the atomic mass of the unknown element X described below.
Please help
Answer:
286
Explanation:
Add atomic mass of all the Isotopes,
Outcome = 825
divide it by number of isotopes which is 4 because there are 4 isotopes
Atomic mass of x = [tex]\frac{825}{4}[/tex]
Atomic mass of x is 286
The atomic mass of the unknown element X is 206 amu. Thus option B is correct.
What is atomic mass?Atomic mass is defined as the relative mass of the element's atom in comparison to the mass of an atom of the C12 isotope.
In an example, the general atomic mass is the average of the atomic masses of a large number of different isotopes.
First we added atomic mass of each isotopes
= 204 + 206 + 207 + 208 = 824
Now to calculate the atomic mass of element X we divide it by 4 as there is four isotopes
So, atomic mass = 824 / 4
= 206 amu
Thus, the atomic mass of the unknown element X is 206 amu. Thus option B is correct.
To learn more about atomic mass, refer to the link below:
https://brainly.com/question/17067547
#SPJ5
True or false: An oxidation number is not the same as an actual charge on an ion. True false question. True False
Answer:
True
Explanation:
They are actually the same
The answer is False.
The oxidation number is the number of electrons removed or added to an element or compound. This is also equal to the charge on the ion.
For example, if Sodium atom loses one electron, it becomes oxidized to the + 1 state.
Na → Na⁺ + e⁻.
So, the oxidation number of Sodium is the charge on the Sodium ion which is + 1.
So, the oxidation number is equal to the charge on the ion.
So, the answer is False.
Learn more about oxidation number here:
https://brainly.com/question/166558
__is a term that refers to the amount of space that a substance or an object takes up
What was the average speed of the truck for this trip?
What type of compound is iron(III) oxide?
Group A metal ionic compound with nonmetal anion
Group A metal ionic compound with polyatomic anion
transition metal ionic compound with polyatomic anion
transition metal ionic compound with nonmetal anion
Answer:transition metal ionic compound with nonmetal anion
Explanation:
Answer:
Your answer is going to be D. transition metal ionic compound with nonmetal anion
Hope this helps :)
Nervous tissue transmits messages throughout the human body by
contracting.
providing protection.
conducting impulses.
absorbing vital nutrients.
Answer: conducting impulses
Explanation:
just did it on edge
Answer:
c. conducting impulses.
Explanation:
got it right on edg, hope this helps!
HEEELLLPPPP:(!!!!! im stuckkkk!!!
Answer:
LIGHT
AIR
SHELTER
FOOD
WATER
Answer:
light
air
shelter
food
water
sharpining a pencil leaves behind pencil shavings. Is sharpining a pencil a physical change a physical or chemical? Explain
Answer:
A physical change
Explanation:
Cause when sharpening a pencil the led stays as led and only changes the height of it not the composition of it
18. Which of these is an ion?
A. Fluorine with 9 protons
B. Calcium with 18 electrons
C. Calcium with 18 neutrons
D. Fluorine with 9 neutrons
A solution that holds more solute than it normally can under the conditions at a given temperature is _____. supersaturated unsaturated saturated diluted
Answer:
Supersaturated !
Explanation:
How many total atoms are in 0.550 g of P2O5?
Answer:
Total atoms in 0.550g of =1.631x1022
Explanation:
answer is above