Answer:
rising action.
Explanation:
Rising action is a term used in literature to describe the corresponding portion of the story, that occurs immediately before the climax, by increasing its atmosphere or builds-up whereby the tension level surges.
Climax, on the other hand, is a form of the highest point major turning point in a story.
While falling action is the point where there is a quick decrease in tension level, and follows immediately after the climax
Resolution is also known as the final part of the story, it follows immediately after falling action.
Hence, when the problem within the story gets more intense and builds, this is the "Rising Action."
You have a different rock with a volume of 30cm and a mass of 60g, What is its density?
Craik and Lockhart (1972) proposed the idea that deeper levels of ____ results in stronger retention of memories
A. Rehearsal
B. Multitasking
C. Memory
D. Processing
Answer: D. Processing
Explanation: 100% on topic test also its in my e notes.
Craik and Lockhart has proposed theory of memory processing. Thus, option D is correct.
Craik and Lockhart proposed the theory for the processing of the level of memory. The memory in humans can be sensory memory, working memory, and long-term memory.
The long term memories have been stored in the deeper cells and the increased or strong stimulation of the processing results in the stronger retention of the memories. Thus, option D is correct.
For more information about the memory processing, refer to the link:
https://brainly.com/question/6249980
what is the most poisonous animal?
Answer:
That depends on what species it is
Explanation:
Like reptiles it is rattlesnakes
Spiders would be black widow
So it depends on the what species you what.
A substance melting on the stove
is an example of a chemical
change
True
b. Flase
a.
Answer:
A. True hope this helped
The answer choices are
-solid
-liquid
-gas
Answer:
solid, gas
Explanation:
gasses are very low density because there is a low mass in a large volume with lots of space between atoms, solids on the other hand are very densely packed and there is very little room between atoms
Joshua uses his thermometer (experimental value) and finds the boiling point of ethyl alcohol to be 75°C 75 ° C . The accepted value of ethyl alcohol is 80°C 80 ° C . What is his percent error?
75-80 = 5 = .0625 X 100 = 6.25%
80 80
Isaac Newton believed that light was made of
O waves.
O particles.
O dust.
O gravity.
Explanation:
particles
Answer: particle
Explanation:
The light make small particle of wave
PLEASE HELP !!! Read the passage below and use it to answer the question. Rainforests have four basic layers. The tallest trees are part of the emergent layer, which can be as much as 60 m above the ground. The sunlight is bright and hot here, and the wind can be strong. The main layer of the rainforest is the canopy, more than 20 m above the ground. It is made up of the leaves and branches of tree tops. The air here is still and very moist. The canopy blocks out most of the sunlight. Smaller trees, vines, and other plants make up the understory, which is less than 12 m above the ground. This layer is damp and warm with very little sunlight. The forest floor is dark, warm, and moist. Decomposers break up fallen leaves and other dead matter here. Which of the following graphs best presents one of the abiotic factors of a rainforest?
Answer:
Read the back of glossary
Explanation:
Read pages
Answer:
hi A
Explanation:
i need the points please
What occurs when a solid substance dissolves into a liquid? 1 It stays solid and sinks to the bottom of the liquid substance. 2 It breaks down and becomes part of the liquid substance. 3 It stays solid and floats on the top of the liquid substance. 4 It changes the liquid substance into a solid substance.
Explanation:
When a solid substance is dissolved in a liquid such as water, the intermolecular forces of attraction between the molecules in the solid substance are overcome and they exist as ions in the solution. Hence the answer is 2.
The correct option is 2.
When a solid substance is dissolved in a liquid such as water, the intermolecular forces of attraction between the molecules in the solid substance are overcome and they exist as ions in the solution.
What is dissolution?Dissolution is the process in which a substance forms a solution. Dissolution testing measures the extent and rate of solution formation from a dosage form, such as a tablet, capsule, ointment, etc. The dissolution of a drug is important for its bioavailability and therapeutic effectiveness.
What is an example of a dissolution?Stirring sugar into water is an example of dissolving. The sugar is the solute, while the water is the solvent. Dissolving salt in water is an example of the dissolution of an ionic compound.
Learn more about dissolution here https://brainly.com/question/4529762
#SPJ2
DNA is a double stranded molecule. If one strand is ATCGATCGATCG, what is the sequence of the other strand?
Which chemistry is used to create energy? *
Nuclear Chemistry
Organic Chemistry
Analytical Chemistry
Biochemistry
Answer:
*biochemistry* is the answer
Answer:
No the real answer is nuclear chemistry
Explanation:
Does more data mean more reliable results or less
Answer:
more reliable. The more results the better results you get.
Explanation:
Answer:
more reliable results
Explanation:
hey there,
< More data is more reliable results as you can see even more about the experiment you are doing! If you only know one other scientist that had done the experiment and it worked for him, then that's not enough data, but if you have thousands of scientists that were able to do the experiment correctly, you will have a more reliable and correct result since now you have more data. >
Hope this helped! Feel free to ask anything else.
Write a brief paragraph that shows that you understand the following terms and relationships between them: atom, well I kill compound, and element.
Answer:
Atom are smaller particles of an element
compounds are mixture of two element
Element are combination of compounds
Explanation:
When an element is breakdown into smaller particles it becomes an atom
Which of the following is not a possible effect of increasing carbon dioxide levels in the atmosphere?a.increase in water contamination and floodsb.ocean acidificationc.cutting down forestsd.reduction of cold-related deaths Please select the best answer from the choices providedABCD
Answer:
b
Explanation:
The only option that is not an effect of increasing carbon dioxide levels in the atmosphere is cutting down forests.
An increasing level of carbon dioxide in the atmosphere causes ocean acidification due to the dissolution of the gas in the oceans. Carbon dioxide also causes global warming - an increase in the average global temperature due to the heat (from the sun) absorbing ability of the gas.
Global warming causes an increase in the level of seas and oceans as a result of the melting of glaciers and polar ice caps. The rise in sea levels causes flooding with associated loss of habitats and biodiversity.
The increase in global temperature also means that cold-related deaths will reduce.
Correct option: b
Answer:
C. cutting down forests
Explanation:
edge test
Which phrase is the best definition of science?
Answer:
Science is the information gathered through study.
Explanation:
Answer:Observation of the physical world.
Explanation:
WILL GIVE BRAINLETS
What is the landform in the image? A.Dune B.Hill C.Plateau D.River
Answer:
the answer is c
Explanation: bc it can't be a hill or a river and a dune no way so it is c a PLATEAU
hope this helped have a great day
A class is 47 min how many seconds is this ?
Answer: 2820 seconds
1 minute = 60 seconds
Multiply the value times 60
47×60=2820
carry out this problem 2.4g/mlx15.82ml
Answer:
Explanation:
i dont really know
If the pressure, volume, and the number of moles of a gas are known, which is needed to calculate the universal gas
constant from the ideal gas laul?
O the temperature of the gas
the molar volume of the gas
the molar mass of the gas
the partial pressure of the gas
Explanation:
temperature of the gas
A different student is given a 10.0g sample labeled CaBr2 that may contain an inert (non-reacting) impurity. Identify a quantity from the results of laboratory analysis that the student could use to determine whether the sample was pure.
Answer:
Melting Point.
Explanation:
In testing of a sample has impurities, we have to check the samples’s melting or boiling points or we a separation technique called chromatography.
Now, CaBr_2 which is calcium bromide is a White Hygroscopic Powder. Therefore it is a solid.
Now, a pure solid will always have a fixed melting point which means that it will melt completely at only one temperature.
However, if there are impurities, the melting point of a substance is affected in two ways:
-It's lower than than the fixed melting point
- It would melt at a range of different temperatures as opposed to a fixed temperature for the pure form.
Therefore, a quantity that can be used to determine whether the sample was pure will be melting point.
Choose all the answers that apply. What do all cells do? reproduce contain hereditary information have a nucleus break down food into energy have a cell membrane
Answer:
contain hereditary information
break down food into energy
Explanation:
Hereditary information is contained in genes and genes are found inside the cell. This implies that the cell contains hereditary information of organisms. This hereditary information is passed on during cell division from parent to daughter cells.
Metabolism occurs in the cells. The cells use oxygen to break down food materials to produce energy.
120mg=______g please help
Answer:
0.12
Explanation:
Cuz you divide the mass value by 1000.
Much Smort (I look up on internet)
What is the speed of an object that moves 100 meters in 5 seconds?
Answer:
speed= distance/time
= 100/5=20mph
Which is the larger? 27 kilograms or 270 grams?
Answer: 27 killograms
Explanation: 1kg = 1000 grams
27 kilograms =27000 grams
A gas has a volume of 150 cm3. Convert this volume into mL
Answer:
The answer is
150 mLExplanation:
To convert the volume from cm³ to mL we use the conversion
1 cm³ = 1 mL
So from the question
if 1 cm³ = 1 mL
Then 150 cm³ = 150 mL
Hope this helps you
During respiration, energy is retrieved from the high-energy bonds found in certain organic molecules. Which of the following, in addition to energy, are the ultimate products of respiration?
(a) CO2, H2O
(b) CH3, H2O
(c) CH2OH, O2
(d) CO2, O2
Answer:
(A.) CO2, H2O
Explanation:
The chemical equation for respiration process is:
[tex]C_{6}H_{12} O_{6}[/tex] + [tex]6O_{2}[/tex] → [tex]6CO_{2}[/tex] + [tex]6H_{2} O[/tex] + ATP↑
Energy is released during the biochemical process in the organism's cells in form of ATP. Byproducts of the reaction are carbon dioxide and water molecules.
Let me know if you require any further assistance.
How many grams of carbon (C) would be present in carbon monoxide (CO) that contains 2.666 grams of oxygen (O)?
Answer:
Explanation:
Given :
Mass of oxygen containing carbon monoxide (CO) is 2.666 gram .
To Find :
How many grams of carbon (C) would be present in carbon monoxide (CO) that contains 2.666 grams of oxygen (O) .
Solution :
By law of constant composition , a given chemical compound always contains its component elements in fixed ratio (by mass) and does not depend on its source and method of preparation.
So , volume of solution does not matter .
Moles of oxygen ,
Now , molecule of CO contains 1 mole of C .
So , moles of C is also 0.167 mole .
Mass of carbon ,
Therefore , mass of carbon is 2 grams .
Hence , this is the required solution .
When sugar is dissolved in water and mixed well the resulting solution is classified as a
Answer:
homogeneous mixture
Explanation:
i'll GIVE BRAINLY
5. Label the following measurement by the quantity it represents: 37 s * A. Density B. Time C. Temperature D. Distance
Answer:
Hey there!
35 s represents time.
The s means "seconds."
Let me know if this helps :)
2. A golden-colored cube is handed to you. The person wants you to buy it for
$100, saying that it's a gold nugget. You pull out your old geology text and
look up gold in the mineral table, and read that its density is 19.3 g/cm3. You
measure the cube and find that it is 2 cm on each side, and has a mass of 40g.
What is its density? Is it gold? Should you buy it?
Answer:
Volume of the cube is 2*2*2 = 8cm^3.
Divide the weight (40g) over the volume (8cm^3).
Density is 5g/cm^3. Definitely not gold.
Explanation:
Yes, the given golden-colored cube is gold .The density of gold is 32 gm/cm³ and we must buy it.
What do you mean by density?Density is a mass of a unit volume of a material substance.
The formula for density is d = M/V, where d is density, M is mass, and V is volume.
Density is commonly expressed in units of grams per cubic centimetre.
To calculate density-
given
mass=40gm
side of cube =2cm
therefore, volume=(side)³
=8cm³
density=?
density=mass/volume
density=40/8
density=5 gm/cm³
The handed golden-colored cube is gold with its density 5gm/cm³ and hence we must buy it.
Learn more about density ,here:
https://brainly.com/question/15164682
#SPJ2