When CuCl2 reacts with NaNO3, copper (II) nitrate and sodium chloride are formed.
a) Write the balanced equation for the reaction given above:
CuCl2 + NaNO3 à Cu(NO3)2 + NaCl

Answer:

9.78x10^(-5) mol

Explanation:

To convert molecules to moles, divide the # of molecules by 6.02x10^23.

5.89x10^19 / 6.02x10^23 = 9.78x10^(-5) mol

Phosphorus can be prepared by electrolysis of an aqueous phosphate solution. The method of extraction of phosphorus from the phosphate solution involves the process of electrolysis.

The electrolysis process is defined as a process in which a chemical reaction is caused by an electric current passing through an electrolyte. The electrolysis of the aqueous solution of phosphate is the process in which phosphorus is extracted from the solution. The procedure of electrolysis of an aqueous phosphate solution is as follows: Two electrodes are placed into the phosphate solution, one is the anode (positive electrode) and the other is the cathode (negative electrode). The anode is made up of graphite and the cathode is made up of mercury. A direct current is then passed through the solution. When the current is passed, it causes the oxygen to be released at the anode, which combines with graphite to produce carbon dioxide.

In addition, at the cathode, hydrogen gas is released along with mercury, and the mercury is mixed with the phosphorus to produce an alloy. The mixture is then filtered, and the impurities are removed with the help of hydrochloric acid. The obtained phosphorus is solid and can be melted and moulded into sticks. The process of electrolysis is a good method for the extraction of phosphorus from aqueous solutions and the process is economically viable. This process is also good because the phosphate solution can be obtained from rock phosphates, and this process is a good alternative to the use of non-renewable phosphorus sources. The main advantages of this process are that it is cost-effective, does not require high temperatures, and is environmentally friendly.

know more about electrolysis.

https://brainly.com/question/12994141

#SPJ11

Answer: C. 0.57 M

Explanation:

Molarity= Moles/Vol

Answer: you go down by your key bad and use those arrows

Explanation:

Nitrous acid ([tex]HNO_2[/tex]) would be more suitable for use in a solution buffered at pH 7.0.

To determine which acid, nitrous acid ([tex]HNO_2[/tex]) or hypochlorous acid (HClO), is more suitable for use in a solution buffered at pH 7.0, we need to compare their pKa values. The pKa is related to the Ka (acid dissociation constant) by the equation:

pKa = -log10(Ka)

Let's calculate the pKa values for nitrous acid and hypochlorous acid using the given Ka values:

For nitrous acid ([tex]HNO_2[/tex]):

pKa = -log10(4.5×[tex]10^{(-4)[/tex])

= -log10(4.5) - log10([tex]10^{(-4)[/tex])

= -log10(4.5) + 4

For hypochlorous acid (HClO):

pKa = -log10(3.0×[tex]10^{(-8)[/tex])

= -log10(3.0) - log10([tex]10^{(-8)[/tex])

= -log10(3.0) + 8

Comparing the pKa values, we find:

pKa ([tex]HNO_2[/tex]) = -log10(4.5) + 4

pKa (HClO) = -log10(3.0) + 8

To learn more about Nitrous follow the link:

https://brainly.com/question/8896461

#SPJ4

Answer:

A

Explanation:

the boat does not have a force to counter act the boys it must give which means it moves cause it is one something that is not as dense as the boy (I THINK)

The limiting reactant in the reaction, given that 5.00 g of NaCL reacted with 10.0 mL of 5 M H₂SO₄ is NaCl

First, we shall obtain the mole of 5.00 g of NaCl. Details below:

Mole of NaCl = mass / molar mass

= 5 / 58.44

= 0.09 mole

Next, we shall obtain the mole of 10.0 mL of 5 M H₂SO₄. Details below:

Mole of H₂SO₄ = molarity × volume

= 5 × 0.01

= 0.05 mole

Finally, we shall determine the limiting reactant. Details below:

2NaCl + H₂SO₄ -> Na₂SO₄ + 2HCl

From the balanced equation above,

2 moles of NaCl reacted with 1 mole of H₂SO₄

Therefore,

0.09 mole of NaCl will react with = (0.09 × 1) / 2 = 0.045 mole of H₂SO₄

We can see from the above that only 0.045 mole of H₂SO₄ out of 0.05 mole is needed to react completely with 0.09 mole of NaCl.

Thus, we can conclude that the limiting reactant for the reaction is NaCl

Learn more about limiting reactant:

https://brainly.com/question/11587316

#SPJ4

Answer:

he ans she and he and she but she was he so how was he

Explanation:

The hydrochloric acid solution with 0.45 g of HCl dissolved in 6.0 L of water has a pH of 2.70. The sodium hydroxide solution created by dissolving 0.20 g of NaOH pellets in 2.0 L of water has a pH of 11.40.

The pH of a hydrochloric acid solution can be determined by calculating the concentration of H+ ions in the solution. In this case, 0.45 g of hydrogen chloride (HCl) is dissolved in 6.0 L of water. To find the concentration, we need to convert grams to moles. The molar mass of HCl is 36.46 g/mol, so 0.45 g is equal to 0.012 moles. Dividing this by the volume of the solution, we get a concentration of approximately 0.002 M. Since HCl is a strong acid, it dissociates completely in water, resulting in an equal concentration of H+ ions. Therefore, the pH of the hydrochloric acid solution is -log(0.002) = 2.70. On the other hand, sodium hydroxide (NaOH) is a strong base that dissociates completely in water to form hydroxide ions (OH-). To find the pH of the sodium hydroxide solution, we need to determine the concentration of OH- ions. Similar to the previous example, we first convert the mass of NaOH to moles. The molar mass of NaOH is 39.997 g/mol, so 0.20 g is equal to 0.005 moles. Dividing this by the volume of the solution, we get a concentration of 0.0025 M. Since NaOH fully dissociates, the concentration of OH- ions is also 0.0025 M. To find the pOH of the solution, we take the negative logarithm of the concentration: -log(0.0025) = 2.60. Finally, we can find the pH by subtracting the pOH from 14: 14 - 2.60 = 11.40.

To learn more about molar mass, click here: brainly.com/question/12127540

#SPJ11

The number of water molecules formed from the given starting materials is 3.99 × 10-21 molecules.

Balanced equation is:2H2 + O2 ---> 2H2OIf you start with 24 molecules of hydrogen gas, how many molecules of oxygen gas do you need?From the above-balanced chemical equation, we can see that 2 molecules of hydrogen react with 1 molecule of oxygen gas to form 2 molecules of water.Thus, to form 24 molecules of hydrogen gas, we need 12 molecules of oxygen gas. How many molecules of water are made from the amount of starting materials described above?To determine the number of molecules of water formed from the starting materials, we have to determine the limiting reagent. The reactant that gives the least amount of product is called the limiting reagent.To determine the limiting reagent, we can use the concept of mole. The number of moles of a substance is determined by dividing the given mass of the substance by its molar mass.Therefore, the given information of the number of molecules is required to be converted to the number of moles.Number of molecules of hydrogen gas = 24The number of moles of hydrogen gas = (24/6.023 × 1023) = 3.989 × 10-21The number of moles of oxygen gas = (3.989 × 10-21)/2 = 1.995 × 10-21Since there are only 1.995 × 10-21 moles of oxygen gas, it will get consumed in the reaction before all the hydrogen gas is consumed. Therefore, oxygen gas is the limiting reagent.The number of moles of water formed is given by the stoichiometric coefficient of water in the balanced equation, which is 2.Number of molecules of water formed from 24 molecules of hydrogen and 12 molecules of oxygen = 2 × (1.995 × 10-21) = 3.99 × 10-21Therefore, the number of water molecules formed from the given starting materials is 3.99 × 10-21 molecules.

Learn more about water molecules here:

https://brainly.com/question/22298555

#SPJ11

Answer:

Some human activities that cause damage (either directly or indirectly) to the environment on a global scale include population growth, overconsumption, overexploitation, pollution, and deforestation, to name but a few.

Explanation:

Hope this helped!!!

For the sequential deprotonations of a polyprotic acid, the equilibrium constants typically decrease with successive ionization. Therefore, the correct answer is option c: decrease with successive ionization.

For the sequential deprotonations of a polyprotic acid, the equilibrium constants typically decrease with each successive ionization. This is due to several factors. As protons are successively removed, the remaining ions become more negatively charged, leading to increased electrostatic repulsion and reduced stability. Additionally, the loss of each proton becomes energetically less favorable as the acid becomes more negatively charged. Furthermore, the availability of electrons for stabilization through resonance or induction decreases as protons are lost. These factors contribute to a decrease in the strength of the subsequent acids formed, leading to lower equilibrium constants for each successive ionization.

Learn more about deprotonations here : brainly.com/question/30706409

#SPJ11

Answer:

A and C

Explanation:

DNA is what makes up you and me and DNA is composed of four bases adenine, guanine, thymine, and cytosine. The others are not true.

The molar concentration of iodide ion (I⁻) in a saturated PbI₂ solution is 3 x 10⁻³ M.

To determine the molar concentration of iodide ion (I⁻) in a saturated PbI₂ solution, we need to consider the stoichiometry of the dissolution reaction of PbI₂ and use the solubility product constant (Ksp) for PbI₂.

The balanced equation for the dissolution of PbI₂ is:

PbI₂(s) ⇌ Pb²⁺(aq) + 2I⁻(aq)

According to the stoichiometry of the balanced equation, every 1 mole of PbI₂ dissociates to produce 2 moles of iodide ions (I⁻). Therefore, the molar concentration of iodide ions can be calculated by multiplying the molar solubility of PbI₂ by 2.

Given that the molar solubility of PbI₂ is 1.5 x 10⁻³ M, the molar concentration of iodide ion in a saturated PbI₂ solution is:

2 x (1.5 x 10⁻³ M) = 3 x 10⁻³ M

Therefore, the molar concentration will be  3 x 10⁻³ M.

To know more about molar concentration here

https://brainly.com/question/29429999

#SPJ4

--The given question is incomplete, the complete question is

"The Molar Solubility Of PbI₂ Is 1.5 X 10⁻³ M.A/ What Is The Molar Concentration Of Iodide Ion In A Saturated PbI₂ Solution?"--

Answer:

If this is an idea gas then 1mol takes up 22.4L.

So, knowing how many L you have you can figure out how many  mole syou have by doing a simple equation:

[tex]\frac{1mol}{y} =\frac{22.4L}{925.4L}[/tex]

Solve for y.

Then, since you know how many moles you have use the ptable https://ptable.com/#Properties to figure out the mass in grams.

NOTE: The ptable tells you that 1mol of H = 1g.....so this should be an easy calculation :) enjoy

Answer:

0.205M

Explanation:

Molarity is an unit of concentration used in chemistry defined as the ratio between moles of solute (In this case, LiF) and liters of solution.

To solve this question, we must find the moles of LiF and the liters of the solution:

Moles LiF -Molar mass: 25.939g/mol-:

2.39g * (1mol / 25.939g) = 0.0921moles

Liters solution:

450mL * (1L / 1000mL) = 0.450L

Molarity is:

0.0921 moles / 0.450L =

Answer: 130 ppm Pb

Explanation:

We use parts per million to express the concentrations of solutions that contain very, very small amounts, often called trace amounts, of a given solute.

More specifically, a solution's concentration in parts per millions tells you the number of parts of solute present for every

10

6

=

1

,

000

,

000

parts of solution. You can thus say that a

1 ppm

solution will contain exactly

1 g

of solute for every

10

6

g

of solution.

In your case, you know that you have

38

mg Pb

⋅

1 g

10

3

mg

=

3.8

⋅

10

−

2

.

g Pb

in exactly

300.0 g

=

3.000

⋅

10

2

.

g solution

This means that you can use this known composition as a conversion factor to scale up the mass of the solution to

10

6

g

10

6

g solution

⋅

3.8

⋅

10

−

2

.

g Pb

3.000

⋅

10

2

g solution

=

130 g Pb

Since this represents the mass of lead present in exactly

10

6

g

of solution, you can say that the solution has a concentration of

concentration

ppm

=

130 ppm Pb

−−−−−−−−−−−−−−−−−−−−−−−−−−−−

The answer is rounded to two sig figs, the number of sig figs you have for the mass of lead present in the sample.

Answer:

22.989769 u

Explanation:

The atomic weight of any atom can be found by multiplying the abundance of an isotope of an element by the atomic mass of the element and then adding the results together. This equation can be used with elements with two or more isotopes: Carbon-12: 0.9889 x 12.0000 = 11.8668. Carbon-13: 0.0111 x 13.0034 = 0.1443.

a. has a sour taste - this statement is for acid.

b. neutralizes bases - this statement is for acid.

c. produces ions in water - this statement is for both acid and base.

d. is named barium hydroxide -  this statement is for base

e. is an electrolyte -  this statement is for both acid and base.

An acid, any substance that in water solution tastes sour, changes the colour of certain indicators.

Acids are ionic compounds that, when dissolved in water, produce positive hydrogen ions ( H⁺ ).

We will indicate whether each of the following statements is characteristic of an acid, a base, or both as follows;

Learn more about characteristics of acid and base here: https://brainly.com/question/14997571

#SPJ4

Answer: 0.391

Explanation:

Ideal gas law is valid only for ideal gas not for vanderwaal gas. Therefore, 0.38moles of gas are in the sample​. Ideal gas is a hypothetical gas.

Ideal gas equation is the mathematical expression that relates pressure volume and temperature. There is no force of attraction between the particles.

Mathematically the relation between Pressure, volume and temperature can be given as

PV=nRT

where,

P = pressure of gas sample = 660.0mmHg=0.86atm

V= volume of gas sample =11.0 L

n =number of moles of gas sample=?

T =temperature of gas =298K

R = Gas constant = 0.0821 L.atm/K.mol

Substituting all the given values, we get

0.86atm×11.0 L =n× 0.0821×298

On calculation we get

9.46=n×24.4

number of moles of sample=0.38moles

Therefore, 0.38moles  of gas are in the sample​.

To learn more about ideal gas equation, here:

https://brainly.com/question/14826347

#SPJ2

The time until nuclear waste cesium 137 is deemed safe can be determined by calculating the number of half-lives required for the amount of cesium 137 to decrease to a safe level.

The half-life of cesium 137 is approximately 30 years. This means that every 30 years, the amount of cesium 137 will be reduced by half. To determine the time until the waste is deemed safe, we need to calculate the number of half-lives required for the amount of cesium 137 to decrease to a safe level. Given that there are 88.44 g of cesium 137 initially, we can calculate the number of half-lives using the formula:

Number of Half-Lives = (ln(initial amount) - ln(final amount)) / ln(0.5)

Using the given values, we can substitute the initial amount as 88.44 g and the final amount as the safe level of cesium 137 (determined by regulatory standards). By solving the equation, we can find the number of half-lives required. Once we have the number of half-lives, we can multiply it by the half-life of cesium 137 (30 years) to determine the total time until the waste is deemed safe. It is important to note that the specific safe level of cesium 137 is not provided in the question. Regulatory bodies and authorities establish safe levels based on various factors, such as environmental and health considerations.

Learn more about  cesium here: https://brainly.com/question/24090570

#SPJ11

The volume of which the stock calcium solution would you need to deliver the 8 mEg dose in the 250-mL of D5W is 2 mL

Therefore, the correct answer is A.

.In this case, CaCl₂ produces Ca₂⁺ and 2Cl⁻.So the equivalent weight of CaCl₂ is:

1Ca₂⁺ + 2Cl⁻ → 1 mol of CaCl2 has 1Ca₂⁺ and 2Cl⁻ions

Equivalent weight of CaCl₂ = Molecular weight / n

Equivalent weight of CaCl₂ = 111/ 3 = 37

The molecular weight of CaCl₂ is 111 gm/mole and n = 3 because it gives 3 ions when it dissociates in a solution.

Number of milliequivalents in 8 mmol of calcium = 8 x 2 = 16 mEq

The number of milliequivalents in the stock solution is 4 x 2 = 8 mEq/ml.

Volume of the stock calcium solution required = (16/8) x 1= 2 mL

So, the Answer: A. 2 mL.

Learn more about chemical solution at:

https://brainly.com/question/31971941

#SPJ11

In any organic redox reaction, you can recognize the reduced and oxidized organic molecules by the net change in electrons between products and reactants. Reduction corresponds to the gain of electrons, and oxidation corresponds to the loss of electrons.

The redox reactions refer to chemical reactions in which the oxidation state of atoms or molecules is altered. In organic redox reactions, one organic compound is reduced (gains electrons) while another is oxidized (loses electrons).The term 'oxidized' means that the molecule is losing electrons or increasing in oxidation state. In contrast, the term 'reduced' means that the molecule is gaining electrons or decreasing in oxidation state. In any organic redox reaction, the reduced and oxidized organic molecules can be recognized by the net change in electrons between products and reactants.The products have lower potential energy than the reactants in a spontaneous redox reaction. When electrons are transferred, energy is either released or absorbed.

To know more about Reduction visit:

https://brainly.com/question/8963217

#SPJ11

Based on the calculations performed in this experiment, the same mass of a solute with a significantly higher molar mass would have a larger effect on the boiling point elevation. As a result, the same mass of a solute with a higher molar mass will have a greater effect on the boiling point elevation.

Boiling point elevation is a thermodynamic phenomenon that occurs when the boiling point of a solvent (a substance that dissolves a solute to create a solution) is increased by adding another substance, the solute, to it. When a solute is added to a solvent, it lowers the freezing point and raises the boiling point of the solvent, which is known as the boiling point elevation.The formula for boiling point elevation is: ∆Tb = Kbm

Here, ∆Tb is the boiling point elevation, Kb is the molal boiling point elevation constant, and m is the molality of the solution. To understand this, let us take an example: Suppose a solution containing 1.0 mol of sodium chloride (NaCl) is dissolved in 1.0 kg of water. The molality of the solution is 1.0 mol / 1.0 kg = 1.0 m. In addition, the Kb for water is 0.51 °C/molal, which means that the boiling point elevation is 0.51 °C when the molality of the solution is 1.0 mol/kg.So, the boiling point of the solution will be raised by 0.51 °C, which can be calculated using the above formula.Calculation performed in this experiment:Boiling point elevation = ΔTb = Kb . mTherefore, based on the above formula, the boiling point elevation is directly proportional to the molality of the solution, which, in turn, is directly proportional to the number of moles of solute in the solution. Furthermore, the number of moles of solute is proportional to the mass of the solute (in grams) divided by its molar mass (in grams/mol).So, if a solute with a significantly higher molar mass is added to the solvent, it will have a larger effect on the boiling point elevation. As a result, the same mass of a solute with a higher molar mass will have a greater effect on the boiling point elevation.

To know more about boiling point elevation visit:

https://brainly.com/question/30641033

#SPJ11

We require 0.896 moles of HgO to produce 0.896 moles of O2.

The balanced chemical equation for the given reaction is;HgO(s) → Hg(l) + O2(g)We can calculate the number of moles of HgO(s) required to produce 0.896 moles of O2(g) using stoichiometry.To use stoichiometry we need to know the mole ratio of O2 to HgO in the above reaction.Based on the balanced chemical equation, the ratio of HgO to O2 is 1:1.This means that 1 mole of HgO will produce 1 mole of O2.Therefore, the number of moles of HgO required to produce 0.896 moles of O2 is also 0.896 moles.150 words explanation:To calculate the number of moles of HgO required to produce 0.896 moles of O2 we can use the mole ratio of the two compounds in the balanced chemical equation.HgO(s) → Hg(l) + O2(g)From the equation, the ratio of HgO to O2 is 1:1. This means that 1 mole of HgO will produce 1 mole of O2.If we have 0.896 moles of O2, we will require the same number of moles of HgO to produce the O2. Therefore, we require 0.896 moles of HgO to produce 0.896 moles of O2.

Learn more about moles here:

https://brainly.com/question/30885025

#SPJ11

To calculate the amount of plutonium-239 remaining after 72,900 years, we need to determine the number of half-lives that have passed. Given that the half-life of plutonium-239 is 24,300 years and 8 kg of this isotope was initially released, we can use the half-life formula to find the answer.

The number of half-lives can be calculated by dividing the total time elapsed (72,900 years) by the half-life of the isotope (24,300 years). In this case, the number of half-lives would be 72,900 years / 24,300 years = 3 half-lives. The remaining amount of plutonium-239 can be calculated by multiplying the initial amount (8 kg) by (1/2) raised to the power of the number of half-lives. Each half-life reduces the amount of plutonium-239 to half its previous value.

Remaining amount = initial amount × (1/2)^(number of half-lives)

Remaining amount = 8 kg × (1/2)^3

Remaining amount = 8 kg × (1/8)

Remaining amount = 1 kg

Therefore, after 72,900 years, there would be 1 kg (1000 grams) of plutonium-239 remaining from the initially released 8 kg.

Learn more about isotope here: https://brainly.com/question/20596678

#SPJ11

The change in internal energy (ΔU) of the system is 320 kJ.

The change in internal energy (ΔU) of a system can be calculated using the first law of thermodynamics, which states that the change in internal energy of a system is equal to the heat added to the system minus the work done by the system:

ΔU = Q - W

where ΔU is the change in internal energy, Q is the heat added to the system, and W is the work done by the system.

In this case, the system does 566 kJ of work (W = -566 kJ) and loses 246 kJ of heat to the surroundings (Q = -246 kJ). The negative sign indicates that the work is done by the system and the heat is lost by the system.

Substituting the values into the equation:

ΔU = -246 kJ - (-566 kJ)

= -246 kJ + 566 kJ

= 320 kJ

Therefore, the change in internal energy (ΔU) of the system is 320 kJ.

Learn more about internal energy from the link given below.

https://brainly.com/question/11742607

#SPJ4

Answers:

Aluminum Frame - The aluminum frame is used to protect all the parts of the solar panel. It basically works as a shield against damaging items (hail, ice.)

Tempered Glass - The tempered glass keeps pressure inside the solar panel and keeps compressure outside of the solar panel to protect it from breaking.

EVA - EVA is a great alternative for electric radiational heat. It has a small amount of degradability to sunlight which keeps the panel from burning.

Solar Cells - Solar Cells are the part of the solar panel which work to transform the solar energy into electricity and not just use raw sunlight.

Back Sheet - Back sheets keep solar cells and the top and the bottom of the panel together. They make sure nothing inside the panel comes off.

Junction Box - The junction box makes sure all the solar cells inside of the solar panel are kept together so that the machine works as a whole and the back sheet's function does not get destroyed.

To drive the equilibrium in the reaction mixture towards the product, manipulate the reaction conditions and adjust the reaction parameter.

Adjusting reaction conditions to drive the equilibrium towards the desired product. By manipulating various factors such as temperature, pressure, concentration, and catalysts, it is possible to shift the equilibrium in a chemical reaction towards the product side. Altering these parameters can impact the forward and backward reaction rates, ultimately favoring the formation of the desired product.

For example, increasing the temperature may promote an endothermic reaction, while reducing the pressure or adjusting the concentration of reactants can help alleviate the impact of Le Chatelier's principle.

Additionally, introducing a catalyst can provide an alternative reaction pathway with lower activation energy, facilitating the production of the desired product. Understanding these principles and their application allows for strategic control over the equilibrium and the optimization of reaction conditions to maximize product yield.  

Learn more about:Equilibrium

brainly.com/question/32297286

#SPJ11