When adding refrigerant to a newly evacuated system, add liquid refrigerant to the system through the liquid-line service valve. The correct option is B.
What is a refrigerant?A refrigerant is a substance that is used in a heat cycle to transfer heat from one area to another.
At room temperature, it is usually a gas. Found in almost everything that cools, and occasionally in things that heat, most notably air conditioners, refrigerators, freezers, and vehicle air conditioners.
If liquid refrigerant is added to the suction line while the system is not running, the compressor may be flooded upon startup.
The compressor will not start in some cases. Only liquid refrigerant should be added to the liquid line when the system is not running.
Thus, the correct option is B.
For more details regarding a refrigerant, visit:
https://brainly.com/question/28265596
#SPJ1
Your question seems incomplete, the missing options are:
A. Add liquid refrigerant to the system through the suction- line service valve
B. Add liquid refrigerant to the system through the liquid-line service valve
C. Add vapor refrigerant to the system through the suction- line service valve
D. Add vapor refrigerant to the system through the liquid- line service valve
Find the pH value after adding 0.05 M of sulfuric acid to a solution consisting of 0.1 M of weak acid and its salt. Note that the value of the weak acid dissociation constant is 4.47
The pH value after adding 0.05 M of sulfuric acid to a solution consisting of 0.1 M of weak acid and its salt is o.91.
What is pH ?The pH scale determines how acidic or basic water is. The range is 0 to 14, with 7 representing neutrality. Acidity is indicated by pH values below 7, whereas baseness is shown by pH values above 7. In reality, pH is a measurement of the proportion of free hydrogen and hydroxyl ions in water.
Ka = [ H⁺ ] [ B⁻ ] / [ HB ]
HB = H⁺ + B⁻
Ka = 4.47
C= 0.1
x = ( - 4.47 + (4.47 )² + 4 ( 0.1 ) ( 4.47 )²/2
= 15.51 + 0.844 / 2
= 16.354/ 2
=8.177
pH = - log [ H⁺ ]
= - log ( x )
= -log ( 8.177 )
pH = 0.91
Thus, The pH value after adding 0.05 M of sulfuric acid to a solution consisting of 0.1 M of weak acid and its salt is o.91.
To learn more about pH follow the link;
https://brainly.com/question/15289741
#SPJ1
while waiting for approval to conduct a clinical trial using peptides 1 and 2, you consider three possible outcomes that might result. you sketch out what the data would look like for each. match each possible outcome with the correct conclusion. for help interpreting the graphs, see hint 1.
Both Peptide 1 and Peptide 2 are effective as toxin concentration in the graft is minimum. So, Peptide 1 is an effective inhibitor of the pathway, and peptide 2 is an effective inhibitor of the TRAP pathway in human infection.
Along the same lines, peptide 2 is an effective inhibitor of the TRAP pathway in human infection, but Peptide 1 is NOT an effective inhibitor of the AGR pathway in human infection. Similarly: Peptide 1 is an effective inhibitor of the AGR pathway, however, peptide 2 is NOT an effective inhibitor of the TRAP pathway in human infection. A peptide is a short chain of amino acids (commonly 2 to 50) connected by substance bonds (called peptide bonds). A more extended chain of connected amino acids (at least 51) is a polypeptide. The proteins fabricated inside cells are produced using at least one polypeptide.
To learn more about peptides,
https://brainly.com/question/29885208
#SPJ4
A mixture of 1.0 mol of He and 1.0 mol of Ne at STP are placed into a rigid container. Which of the following statements are true for the system? a. Both gases have the same molecular speed
b. All of the above are true c. Both gases contribute equally to the density of the mixture d. Both gases have the same average kinetic energy e. The mixture has a volume of 22.4L
The true statement is d. Both gases have the same average kinetic energy. Since the gases are at the same temperature in this situation, they will have the same average kinetic energy.
The average kinetic energy of a gas is determined by the temperature of the gas. The molecular speed of a gas is determined by the temperature of the gas and the mass of the gas molecules. Helium and neon have different atomic weights, so their molecular speeds will be different at the same temperature. The density of a gas is determined by the number of molecules and the volume they occupy. If the number of molecules of each gas is equal, but the atomic weights of the gases are different, then the density of the mixture will be different from the densities of the individual gases.
Learn more about volume, here https://brainly.com/question/30077698
#SPJ4
A chemist decomposes samples of several compounds; the masses of their constituent elements are shown. Calculate the empirical formula for each compound. a. 1.651 g Ag, 0.1224 g O b. 0.672 g Co, 0.569 g As, 0.486 g O c. 1.443 g Se, 5.841 g Br
The empirical formula for each compound are as follow,
a)[tex]Ag_2 O[/tex]
b)[tex]Co_3As_2O_8[/tex]
c)[tex]SeBr_4[/tex]
As per the data share in the above question are as follow,
The mass of their constituent elements are as follow,
a) Ag=1.651 g
O=0.1224 g
b)Co =0.672 g
As =0.569 g
O=0.486 g
c) Se =1.443 g
Br =5.841 g
We have to calculate the empirical formula for each compound.
a)Now Moles of (given mass upon Molar mass) [tex]Ag=\frac{1.651}{108} =0.015 \:moles[/tex]
Moles of [tex]O=\frac{0.1224}{8\times 2} =0.0077 \:moles[/tex]
Smallest mole value [tex]0.0077 \:moles[/tex]
Divide all component by smallest mass.
Therefore [tex]Ag \Rightarrow\frac{0.015}{0.0077} \rightarrow2\\\\O \Rightarrow\frac{0.0077}{0.0077} \rightarrow1[/tex]
Combine to get empirical formula,
[tex]Ag_2 O[/tex]
b)Now Moles of (given mass upon Molar mass) [tex]Co=\frac{0672}{59} =0.011 \:moles[/tex]
Moles of [tex]As=\frac{0.569}{75} =0.0076\: moles[/tex]
Moles of [tex]O=\frac{0.486}{16} =0.0304 \:moles[/tex]
Smallest mole value [tex]0.0076 \:moles[/tex]
Divide all component by smallest mass.
Therefore
[tex]Co \Rightarrow\frac{0.011}{0.0076} \rightarrow1.5\rightarrow1.5 \times 2\rightarrow3\\\\As \Rightarrow\frac{0.0076}{0.0076} \rightarrow1\rightarrow1 \times 2\rightarrow2\\\\O \Rightarrow\frac{0.0304}{0.0076} \rightarrow4\rightarrow4 \times 2\rightarrow8[/tex]
Combine to get empirical formula,
[tex]Co_3As_2O_8[/tex]
c)Now Moles of (given mass upon Molar mass) [tex]Se=\frac{1.443}{79} =0.018 \:moles[/tex]
Moles of [tex]Br=\frac{5.841}{80} =0.073 \:moles[/tex]
Smallest mole value [tex]0.018 \:moles[/tex]
Divide all component by smallest mass.
Therefore
[tex]Se \Rightarrow\frac{0.018}{0.018} \rightarrow1\\\\Br \Rightarrow\frac{0.073}{0.018} \rightarrow4[/tex]
Combine to get empirical formula,
[tex]SeBr_4[/tex]
For such more question on empirical formula.
https://brainly.com/question/1603500
#SPJ4
which of the following options correctly describe the processes occurring at the anode of a galvanic cell? select all that apply.
1. oxidation takes place at the anode
2. The anode is the source of electrons in the current flow
The correct option is both 1and 2, oxidation takes place at the anode of the galvanic cells and it also the source of electrons in current flow.
Oxidation process happens at the anode, and reduction process happens at the cathode. The anode is the negative terminal for the galvanic cell because the reaction at the anode is the source of the electrons for current.
The movement of electrons from one substance to another is what propels the process. Thermodynamics is in favor of this. The completion of the circuit in a galvanic cell or battery creates a pathway for the substance at the anode (oxidation) to transfer electrons to the substance at the cathode through the circuit (reduction).
A galvanic cell is a type of electrochemical device that generates an electric current by transferring electrons during the redox processes.
For more about the galvanic cells, please refer:
https://brainly.com/question/15096829
#SPJ4
Phenacaine HCI 1% w/v Chlorobutanol 0.5% w/v 1.9% Boric Acid Solution ad 60 mL Make isotonic solution using boric acid. Sig. One drop in each eye. (Please use White-Vicent Method) (a) What are the needed amount of phenacaine HCl and chlorobutanol? (b) What is the required volume of 1.9% boric acid? (c) If you do not have 1.9% boric acid solution and have to compound from boric acid powder
A)The needed amount of phenacaine HCl is 0.6g and chlorobutanol is 0.3 g B) 40.8 ml is the required volume of 1.9% boric acid C) 0.7752 grams you do not have 1.9% boric acid solution and have to compound from boric acid powder
A)for calculating amount. of drug requieed Amount of phenacine Hcl SO = 1% w/v measure 19 in 100 ml
60/100×1g= 0.6 gm
Amount of chlorobutanol = 0.5% w/v means 0.5g in 100 ml.
So 0.5g ⇒100ms
>> 60/100 ×0.5g = 0.39gm
b) so total volume
= Yol
At Vol. B
= 7.2ml + 12
= 19-2nd
So Volume Boric acid
= total volume of solution - volume of drug
= 60ml - 19.2ml
= 40.8gm
c) in this preparation. we need
40.8 ml = 0.4089 of Nac to =0.77529 grams boric acid powder to 40.8 ml
Learn more about phenacine here :
https://brainly.com/question/9333242
#SPJ4
one of the steps in the biological pathway for carbohydrate metabolism is the conversion of fructose 1,6-bisphosphate into dihydroxyacetone phosphate and glyceraldehyde 3-phosphate. draw curved arrows to show the movement of electrons in this step of the reaction mechanism.
steps in the biological pathway for carbohydrate metabolism is First and foremost, the base B abstracts a proton from the hydroxy group of carbon 4 .The image depicts further electron transfer (bond shifting), and the electron eventually resides on the electronegative oxygen atom.
A step from the mechanism of interconversion of D gluconic acid and D mannonic acid is given in the following reaction. The reaction is an epimerization reaction in which one of the carbon configurations changes. In the step described here, base A- abstracts a proton from the hydroxyl group, causing the electron pair to shift as shown in the image. The chemical adjusts that take place within a cell or organism. These adjustments create power and the equipment that cells and organisms necessitate to develop, replicate, and keep themselves alive. A fast metabolism does not necessarily imply thinness. In fact, studies have shown that people who really are overweight or obese frequently have fast metabolisms.
Learn more about carbohydrate metabolism here:
https://brainly.com/question/16047791
#SPJ4
27. Which of the following best describes the properties of protons, neutrons, and electrons
A. Protons and neutrons have the same mass; the mass of an electron is very close to zero
B. Protons and electrons have the same mass; the mass of a neutron is double the mass of a proton
C. Protons, neutrons, and electrons all have the same mass.
D. Neutrons and protons have the same mass; the mass of an electron is half the mass of a proton
Answer:
A. Protons and neutrons have the same mass; the mass of an electron is very close to zero
Explanation:
The figure below shows the rotation curves of several spiral galaxies, extending to the very edge of their visible disks. What do these curves tell us about the distribution of dark matter in these galaxies?
Group of answer choices
Most of the dark matter is in the bulge.
Most of the dark matter is in the galaxies’ outskirts.
Most of the dark matter is near stars.
Most of the dark matter is in clumps.
The thing that the curves tell us about the distribution of dark matter in these galaxies is option B: Most of the dark matter is in the galaxies’ outskirts.
Why do galaxy rotation curves suggest the existence of dark matter?Beyond the visible borders of galaxies, the velocity of stars remains relatively constant, suggesting that there must be more matter present than what we can see as stars and gas.
When the impact of DE became noticeable, the rotation curves are shown to dip at a specific distance. r. These flat, v = constant, rotation curve data suggest that the amount of dark matter is increasing linearly with r up to great distances from the spiral galaxies' centers.
From the graph you can see they all pointing or going one direction, hence we can deduce that it is option B.
Learn more about dark matter from
https://brainly.com/question/28256017
#SPJ1
the product of the following reaction has the constitution shown. no stereochemistry is implied. deduce the stereochemistry on the basis of the fact that iodolactonization is normally an anti addition and it was determined experimentally that the ring junction is cis. select the single best answer. 1935 1935c 1935a 1935d 1935b
The product of the following reaction has the constitution shown. No stereochemistry is implied. If the stereochemistry on the basis of the fact that iodolactonization is normally an anti addition and it was determined experimentally that the ring junction is cis then the correct option is Option A.
Since ring junction is cis means it Should be axial, equatorial or equatorial, axial.
And addition of Iodine is anti, that means iodine and ring junction are trans, it should be axial, axial or equatorial, equatorial position of Iodine and one of ring junction.
Note: 1,2-cis - axial, equatorial or equatorial, axial
1,2-trans: axial, axial or equatorial, equatorial
So, The constitution is revealed in the result of the given reaction. There is no implication of stereochemistry. Option A is the correct option if the stereochemistry is based on the knowledge that iodolactonization is generally an anti addition and the ring junction was determined empirically to be cis.
To learn more about Stereochemistry, Here :
https://brainly.com/question/16844475?referrer=searchResults
#SPJ4
35. What is the set up used to determine the average atomic mass of Boron in #34?
A. (10 + 11) /2
B. (10 x .20) + (11 x .80)
C. 11 + 10
D. (10 x .20) + (11 x .80) /2
Answer: B
Explanation: 2 isotopes of boron are present.
Let percent abundance of B-10 is x
percent abundance of B-11 is (100-x)
Average atomic mass,
[tex]10.80=\frac{x*10+(100-x)*11}{100}[/tex]
[tex]10.80=\frac{10x+1100-11x}{100}[/tex]
[tex]1080=1100-x[/tex]
[tex]x=20[/tex]
In which of the following cases would recrystallization be favored over extraction when purifying a mixture of two solid compounds? 1. When both compounds have the same functional group(s). II. When the desired compound is poorly soluble in the solvent pair at low temperatures and greatly soluble in the solvent pair at high temperatures. III. When there is a significant excess of the desired compound. A. I and III B. II C. II and III D. I and II E. All of the above F. None of the above
The following cases would recrystallization be favored over extraction when purifying a mixture of two solid compounds is II. Option B.
A compound is a substance in which two or more different chemical elements are combined in a certain ratio. When elements come together, they react with each other to form unbreakable chemical bonds.
The definition of recrystallization is a compound purification technique in which a compound is dissolved in a solvent and slowly cooled to form crystals that represent a purer form of the compound. Scientists use recrystallization to purify solids usually products from various chemical reactions in a compound are dissolved.
Learn more about Recrystallization here:- https://brainly.com/question/10194206
#SPJ4
3) which of the following can represent a buffer: a) hcl (strong acid) and nacl b) h2co3 (weak acid) and na2co3 c) h2o and hcl (strong acid) d) ch3cooh (weak acid) and kch3coo
The correct answer which can represent buffer is d) CH3COOH (weak acid) and KCH3COO.
A buffer is a solution that resists changes in pH when acids or bases are added. A buffer is made up of a weak acid and its conjugate base, or a weak base and its conjugate acid. The weak acid and its conjugate base form a buffer because when the weak acid is added, it is partially neutralized by the conjugate base, and when the weak base is added, it is partially neutralized by the conjugate acid.
When CH3COOH (weak acid) and KCH3COO (potassium salt of the weak acid) are in solution, the CH3COOH is partially neutralized by the KCH3COO, making it an effective buffer.
For more questions like Buffers click the link below:
https://brainly.com/question/12855736
#SPJ4
6. (1 pt) refer to the synthetic sequences below. in the step with thionyl chloride explain if hexamethylphosphoric triamide (hmpt) or 1,4-dioxane was added along with thionyl chloride. provide a specific rationale.
Hexamethylphosphorous triamide is useful as a reagent in organic synthesis as a phosphorylating agent. It is engaged with carbon tetrachloride for the substitution of hydroxy groups with chlorides.
It is jumbled in the preparation of epoxides and arene oxides from aldehydes and aryldialdehdyes respectively. It is used in the composing of carbonates as well as the reduction of ozonides.
Air and moisture sensitive. Keep the container tightly direct in a dry and well-ventilated place. clashing with strong oxidizing agents.
lower aromatic aldehydes to symmetrical epoxides in good yield. Both cis- and trans-isomers are formed.
Under suitable conditions, the reaction of the intermediate with a second aldehyde can lead to mixed deoxybenzoins or diaryl enamines.
Has also been used for a variation of other reductions including that of ozonolysis intermediates: Helv. Chim. Acta, 50, 2387 (1967), and of primary alkyl nitro compounds to nitriles: Synthesis, 36 (1979).
Bromohydrins can be change to alkenes, by reductive elimination from their triflate esters
To know more about Synthetic Sequences:
https://brainly.com/question/29842813
#SPJ4
What is the maximum theoretical mass of ammonia that can be made from 300g of hydrogen gas?
The maximum theoretical mass of ammonia production from 300g of hydrogen gas is equal to 1700 g.
What is theoretical yield of the chemical reaction?The theoretical yield of the chemical reaction can be explained as the quantity of product formed in a reaction evaluated from stoichiometric calculations.
Given the reaction of the formation of ammonia from hydrogen gas:
3H₂ (s) + N₂ (g) → 2NH₃ (g)
The molecular mass of the ammonia = 17 g/mol
Given the mass of the hydrogen gas = 300 g
The number of moles of the hydrogen gas = 300/2 = 150 mol
From the above equation, 2 moles of ammonia are produced from 3 moles of hydrogen gas.
150 mol of hydrogen gas will produce ammonia = (2/3) ×150 = 100mol
The mass of ammonia is produced = 100 × 17 = 1700 g
Learn more about theoretical yield, here:
brainly.com/question/14966377
#SPJ1
For the following reaction, the reactants are the favored species at equilibrium. Classify each of the reactants and the products based on their strength as Bronsted-Lowry acids or bases.
HCN + C9H7N --><-- CN- + C9H7NH+
HCN
C9H7NH+
C9H7N
CN-
Stronger Bronsted-LowrTy acid
Weaker Bronsted-Lowry acid
Stronger Bronsted-Lowry base
Weaker Bronsted-Lowry base
At equilibrium, HCN is weaker Bronsted-Lowry acid, C₉H₇NH⁺ is stronger Bronsted-Lowry acid, C₉H₇NH is weaker Bronsted-Lowry base and CN⁻ is stronger Bronsted-Lowry base.
CN⁻ + C₉H₇NH⁺ → HCN + C₉H₇N
Products are favored. So, CN⁻ accepted the proton instead of C₉H₇N and C₉H₇NH⁺ lost its proton instead of HCN.
C₉H₇NH⁺ - stronger Bronsted-Lowry acid
C₉H₇N - weaker Bronsted-Lowry base
HCN - weaker Bronsted-Lowry acid
CN⁻ - stronger Bronsted-Lowry base
So, at equilibrium, HCN is weaker Bronsted-Lowry acid, C₉H₇NH⁺ is stronger Bronsted-Lowry acid, C₉H₇NH is weaker Bronsted-Lowry base and CN⁻ is stronger Bronsted-Lowry base.
To learn more about Bronsted-Lowry acids or bases, Here :
https://brainly.com/question/14407412?referrer=searchResults
#SPJ4
Determine the name of the chemicals involved:
Cs₂CO₃
SrI₂
SrCo₃
CsI
When naming ionic compounds, the cationic part or the metal is named first. The name of Cs₂CO₃ is cesium carbonate and the name of SrI₂ is strontium iodide. SrCO₃ is named as strontium carbonate and CsI is cesium iodide.
What is chemical formula?Chemical formula of a compound is the simplest way to represent the compound. Chemical formulas help to identify and distinguish the compound easily.
The ionic compounds are named starting with the cationic part and secondly the anionic part. For example, the compound Cs₂CO₃ is named starting with the metal part cesium then the anionic part carbonate. Thus, its name is cesium carbonate.
Similarly the two compounds of strontium are named as, SrI₂ - strontium iodide and SrCO₃ as strontium carbonate.
The ionic compound, CsI is named as cesium iodide.
To find more on ionic compounds, refer here:
https://brainly.com/question/13797371
#SPJ1
For each trial, calculate the moles of KHP used to neutralize the NaOH solution and put the answer in the Results Table. (Hint: Use the correct formula from the Discussion section to calculate the molar mass of KHP! It is NOT the mass of K + H + P!)
For each trial, using the mole ratio from the balanced equation, calculate the moles of NaOH and put the answer in the Results Table.
For each trial, calculate the molar concentration of the NaOH solution and put the answer in the Results Table. (See example in the discussion.)
Calculate the average molarity and enter this answer in your Results Table.
Submit your Results Table and Calculations in the following corresponding question boxes.
1.Moles of KHP for Trial 1,2,3,4
2.Moles of NaOH for Trial 1,2,3,4
3.Molarity of NaOH (M) for trial 1,2,3,4
4. Average Molarity of NaOH (M)
1. The number of moles of KHP is found by dividing the mass of KHP by the molecular weight of KHP.
2. The number of moles of NaOH is found by multiplying the moles of KHP by the mole ratio of NaOH to KHP given by the above, balanced chemical reaction.
It will be presumed that more KHP is present in the solution if additional NaOH is added. As a result, the % KHP will be higher than anticipated. If the concentration of NaOH is doubled, just half the volume from the initial experiment is needed. To titrate NaOH with KHP, add NaOH from the burette to a predetermined amount of KHP. The mass and volume of KHP utilized to create the KHP solution are used to calculate the molarity of the KHP solution. The molarity of the NaOH is then determined using the information from the titration.
To learn more about number of moles visit:https://brainly.com/question/14919968
#SPJ4
States of Matter
Heating Curve Calculation
144.29 g of pentane vapor at 117 °C is cooled
to completely solid at -84 °C.
Heating Curve Data for Pentane
Boiling Point (°C)
Melting Point (°C)
AHp (kJ/mol)
vap
AHfus (kJ/mol)
Specific Heat, gas (J/mol K)
Specific Heat, liquid (J/mol K)
117
-84
45.3
9.3
120
168
How much heat is released
from the system as the
pentane cools?
A 157 kJ
B. 177 kJ
C. 67600 kJ
D. 67.5 kJ
The amount of heat released from the system as the pentane cools is 67.5kJ.
What is the formula for calculating heat absorbed by pentane?To determine the heat released from the system as the pentane cools, we need to consider the heat absorbed or released during each of the phase changes (vaporization and fusion) as well as the heat absorbed or released during the temperature change of the substance in each phase.
The heat absorbed or released during a phase change can be calculated using the enthalpy of vaporization (AHvap) or enthalpy of fusion (AHfus) and the number of moles of substance undergoing the phase change.
The heat absorbed or released during a temperature change can be calculated using the specific heat of the substance and the number of moles of substance and the temperature change.
In this case, we can first calculate the heat absorbed or released during the vaporization of the pentane:
Heat = ΔHvap * moles
Heat = 45.3 kJ/mol * 144.29 g / (58.12 g/mol) = 102.1 kJ
Next, we can calculate the heat absorbed or released during the cooling of the pentane vapor to the melting point:
Heat = specific heat * moles * temperature change
Heat = 168 J/mol K * 144.29 g / (58.12 g/mol) * (117 - (-84)) K = 68400 J = 68.4 kJ
Then, we can calculate the heat absorbed or released during the fusion of the pentane:
Heat = ΔHfus * moles
Heat = 120 kJ/mol * 144.29 g / (58.12 g/mol) = 270 kJ
Finally, we can calculate the heat absorbed or released during the cooling of the pentane from the melting point to the final temperature:
Heat = specific heat * moles * temperature change
Heat = 168 J/mol K * 144.29 g / (58.12 g/mol) * (-84 - (-84)) K = 0 J
The total heat released from the system can be calculated by adding up the heat absorbed or released during each of these processes:
Total heat = 102.1 kJ + 68.4 kJ + 270 kJ + 0 kJ = 440.5 kJ
The correct answer is therefore D) 67.5 kJ.
Learn more about heat absorbed, here:
https://brainly.com/question/12473602
#SPJ1
A chemist conducts an experiment in which 2.0 L of hydrogen gas is collected over water at 1 atm and 298 K. The phrase 'over water" means that the gas was collected by bubbling it into an inverted bottle filled with water, which is sitting in a water bath. The gas is trapped in the bottle, displacing the water into the water bath. However, the gas collected is now saturated with water vapor. The partial pressure of water vapor at 298 K is 0.03 atm. Using Dalton's Law, calculate the pressure of the hydrogen gas in atm.0.97 atm
The volume of the hydrogen gas in atm.0.97 atm is 1.78 L.
An ideal gas is a theoretical gas composed of many randomly transferring factor particles that aren't difficult to interparticle interactions. the best gasoline idea is beneficial because it obeys the precise gas law, a simplified equation of country, and is amenable to evaluation under statistical mechanics.
An ideal gas is described as one for which both the extent of molecules and forces between the molecules are so small that they have got no effect at the behavior of the gas. The real gas that acts almost like a really perfect gasoline is helium. that is due to the fact helium, in contrast to maximum gases, exists as an unmarried atom, which makes the van der Waals dispersion forces as low as viable
Caculation:-
P1= 0.97 atm
V1= 2 L
T1= 298 K
P2= 1 atm
V2= ?
T2= 273 atm
V2 = 0.97 atm × 2 L × 273 /298 k
= 1.78 L
Learn more about ideal gas here:-https://brainly.com/question/20348074
#SPJ4
q1. silver nitrate 1:500 w/v solution 60 ml make isotonic solution using nacl sig. for eye use (please use both e value and white-vincent method)
Silver nitrate 1:500 w/v solution 60 ml make isotonic solution using nacl sig. for eye use The method's equation is V=E x W(g)x (100mL) (0.9g)
Isotonic solutions are those that have the exact same water and solute concentrations as the cytoplasm of a cell. Since there is no net gain or loss of water, cells placed in an isotonic solution won't either contract or expand.
The Greek word isotonic, which approximately translates to equal or same tone. In an article on medicine.net, isotonic exercise causes the muscle to shorten while maintaining equal tone. Thus, throughout the activity, your muscles are under the same tension.
Isotonic solutions are used to increase the volume of extracellular fluid lost as a result of blood loss, surgery, dehydration, and fluid loss.
IV fluids known as isotonic solutions have a comparable level of dissolved particles to blood. Normal saline, or 0.9% sodium chloride, is an illustration of an isotonic IV solution.
To learn more about isotonic solution. Please visit the below link.
https://brainly.com/question/19464686
#SPJ4
Which way would electrons and ions flow in the voltaic cell in Part 1? Recall the voltaic cell is made using aluminum and tin electrodes immersed in a 1.00 Msolution of Al3+and Sn2+ Items (3 items) (Drag and drop into the appropriate area below Anions Electrons Cations Categories Toward Al electrode Toward Sn electrode
The anode and cathode, or the oxidation and reduction halves of the cell, always exchange electrons. The electrons will move from the more negative half reaction to the more positive half reaction in an Eocell of the half reactions.
How do you tell a voltaic cell's positive and negative terminals apart?The electrochemical series' lower-ranking metal will become the positive terminal. The positive ions in the electrolyte will receive the released electrons from the positive terminal. The negative terminal of a voltaic cell is called the anode, and the positive terminal is called the cathode.
What directions do cations and electrons flow in?Electrons in the wire and electrodes carry electrical current, although it is transported by opposingly moving anions and cations within the cell. Oxidation takes place at the anode because it can accept electrons.
To know more about electrons and ions visit:-
https://brainly.com/question/20309096
#SPJ4
What are the mass numbers for the two nitrogen isotopes?
N-14
N-15
N-25
N-13
The 2 isotopes of Nitrogen are Nitrogen-14 and Nitrogen-15 .
What are isotopes?Isotopes are atoms with the same number of protons and different number of neutrons. Even though they have nearly identical chemical properties, they differ in mass which affects their physical properties.
As you know, the atomic number of nitrogen is = 7.
Isotopes are forms of elements that have the same atomic number (Z) but different mass numbers because they have different numbers of neutrons (A).
Now,
Atomic number = number of protons
Isotopes have the same atomic number.
Atomic number for both isotopes = 7. However, the mass numbers of the two isotopes are different.
In other words, the mass number = the number of (protons + electrons).
Therefore, nitrogen-14 has a mass number of 14 and nitrogen-15 has a mass number of 15.
To know more about isotopes refer to:
https://brainly.com/question/14220416
#SPJ1
nitrogen monoxide is produced by combustion in an automobile engine. according to the following reaction, how many grams of oxygen gas are necessary to form 0.154 moles nitrogen dioxide?
The nitrogen monoxide produced by the combustion in the automobile engine. the grams of the oxygen gas are used to form the 0.154 moles of the nitrogen dioxide is 2.46 g.
The reaction is given below :
2NO + O₂ ---> 2NO₂
2 moles of the NO₂ produce by the 1 moles of O₂
moles of the of NO₂ = 0.154 mol
moles of the O₂ = (1/2) × 0.154
= 0.077 mol
molar mass of O₂ = 32 g/mol
mass of O₂ = moles × molar mass
= 0.077 × 32
= 2.46 g
The mass of oxygen gas needed to form the nitrogen dioxide is 2.46 g.
To learn more about nitrogen dioxide here
https://brainly.com/question/16890624
#SPJ4
students in a biology class are studying the effects of temperature on the aquatic plant elodea. They count the number of oxygen. bubbles released by an elodea plant in a beaker of water heated to different temperatures
From the given graph plotting the rate of photosynthesis versus the temperature, the rate of oxygen production is greatest at the point M.
What is photosynthesis?Photosynthesis is the biochemical process of synthesising chemical energy by green plants with the aid of light energy. The photosynthetic reaction involves the combination of carbon dioxide and water producing oxygen gas and glucose.
The chemical energy is stored in plants in the form of glucose which is then break down by the need of energy forming ATP. The photosynthetic reaction is affected by the temperature and pressure of the atmosphere.
From the graph, it is clear that, the rate of photosynthesis is higher at the point M. Higher the rate of photosynthesis, higher will be the oxygen production. Hence, option B is correct.
To find more on photosynthesis, refer here:
https://brainly.com/question/29764662
#SPJ1
One step in the synthesis of occidentalol, a natural product isolated from the eastern white cedar tree, involved the following reaction. Draw the structure of A (use hashed wedged bonds to denote endo bonds and wedged bonds to denote exo bonds).
Formation of A In the preceding technique, 4-methylcyclopenhexa-3-enone (dienophile) reacts with a cyclic diene to create a bicyclic product with two rings fused. This reaction is known as the Diels-Alder reaction. This coordinated reaction can be represented as shown in the image attached.
Consequently, the procedure outlined above shows how the Diels-Alder reaction results in product A. As a result, A's structure is shown in the following way.
From A, change to B
Due to compound A's tricyclic fused ring with two six-membered rings, a carbon dioxide molecule is destroyed when it is heated, coupled with a decarboxylation electrocyclic pericyclic reaction.
On Earth, organic molecules make up every living thing. Molecules are made up of bonded atoms. All living things contain organic molecules, which are the majority of carbon-containing compounds.
For more information on organic compound kindly visit to
https://brainly.com/question/5994723
#SPJ4
joseph decides to test the idea of his friend carl that heating certain compounds releases a strange new gas with interesting properties (e.g. it is exhilirating to breathe). he carefully weighs out a number of samples and puts them in sealed tubes, then heats them until they stop changing, then records the new weights. by subtracting the weights he is able to tell whether an invisible gas released during the
Experiment is a scientific procedure carried out to test an idea or hypothesis. It provide insight about the cause and effect.
joseph decides to test the idea of his friend carl that heating certain compounds releases a strange new gas with interesting properties. he carefully weighs out a number of samples and puts them in sealed tubes, then heats them until they stop changing, then records the new weights. by subtracting the weights he is able to tell whether an invisible gas released during the Experiment. An experiment is a procedure carried out to support or refute a hypothesis, or determine the efficacy or likelihood of something previously untried. Experiments provide insight into cause-and-effect by demonstrating what outcome occurs when a particular factor is manipulated.
To learn more about Experiment please visit:
https://brainly.com/question/24708013
#SPJ4
Water is a polar solvent and hexane ( (C 6H 14) s a nonpolar solvent. Which of the following correctly describes the solubility of the solute? o octane (nonpolar), soluble in water O Cacl2, soluble in hexane O CCl4 (nonpolar), soluble in water O mineral oil (nonpolar), soluble in water O NaHCO3, soluble in water
NaHCO3 is soluble in water. NaHCO3 is ionic polar compound. water is polar quantities so, polar disolve in polar.
The basic concept of solubility is that like dissolves like. It means that polar substances are soluble in polar solvents and non-polar substances are soluble in non-polar solvents.
Solubility is described as the most amount of a substance so that it will dissolve in a given amount of solvent at a exact temperature. Solubility is a function property of a particular solute–solvent aggregate, and unique substances have substantially differing solubilities.
Solubility is the ability of a substance (solute) to form a solution with another substance (solvent). Insolubility is the opposite property, the inability of a solute to form such a solution.
Learn more about solubility here:
https://brainly.com/question/23946616
#SPJ4
the dayton accords multiple choice brought the deployment of peacekeeping troops to bosnia. ended the soviet invasion of afghanistan. ended the placement of soviet missiles on cuban soil. established the coalition that attacked iraq in the persian gulf war in 1990. brought a peaceful dissolution of the soviet union.
The Dayton accords brought the deployment of peacekeeping troops to Bosnia and is therefore denoted as option A.
What is Dayton accord?This is referred to a peace agreement which was reached on Nov. 21, 1995 in which warring parties agreed to peace and to a single sovereign state known as Bosnia and Herzegovina.
This type of accord was led to the deployment of peacekeeping troops to the area in other to tackle the conflict and ensures that human right due to the killings and other vices which occurred during this period and is still maintained thereby making option A the correct choice.
Read more about Dayton accord here https://brainly.com/question/1147498
#SPJ1
how many grams of al(s) are needed to produce 154.6 g of al2o3 if the percent yield for this reaction is 87.5%. assume that there is excess o2.
44.98 grams of al(s) are needed to produce 154.6 g of al2o3 .
briefly:-4 Al(s) + 3 O₂(g) → 2 Al₂O₃(s)
mass obtained of an Al₂O₃ (experimental yield) is 154..6 g.
Theoretical yield of an Al₂O₃ is x g.
Calculate the percent yield of Al₂O₃ using the following expression.
%yield = (experimental yield / theoretical yield) × 100%
(154..6 / x) × 100% = 87.8%
theoretical yield= 176.08
molar mass of Al₂O₃ is 101.96 g/mol
mass of Al = 26.98 u*176.08/101.96= 44.98g
How is the yield rate calculated?A bond's yield is a number that represents the return on investment. The formula yield = coupon amount/price can be used to compute yield in its most basic form.
How is yield calculated?Yield calculation methods The stock or bond's market value or original investment should be determined. Identify the profit the investment produced. Subtract the income from the market value. Add 100 to this amount.
To know more about percent yield visit :-
https://brainly.com/question/17042787
#SPJ4