His hair got charged due to continuous friction causing them to get attracted to other objects and thus standing up.
Answer:The comb and hair have become charged with opposite charges.
Explanation:When a comb is run through your hair charges pass between your hair and the comb, so the comb becomes charged either positively or negatively, and the hair oppositely charged. When the comb is brought close to paper an opposite charge is induced in the paper, and the opposite charges attract.
A book is at rest on a flat table. The book is pushed across the table, causing it to move
and eventually come to rest again. How does the potential and kinetic energy change
during this process? (1 point)
The potential and kinetic energy will stay the same unless the book speeds
up or slows down
The potential energy increases as the book is pushed across the table.
The kinetic energy stays the same.
The potential energy will stay the same as long as the book stays on the
table. The kinetic energy increases as the book is pushed across the table.
The potential and kinetic energy decreases as the book comes to rest
again
Answer:
Explanation:
As no altitude or mass changed, the potential energy remained constant.
The potential energy will stay the same as long as the book stays on the
table.
Kinetic energy went from zero at rest to a positive value while moving, and then returned to zero when the book was at rest again.
The kinetic energy increases as the book is pushed across the table.
Use the equation of motion to answer the question. Use the equation of motion to answer the question.
x=x0+v0t+12at2
An object has a starting position of x = 2 m, a starting velocity of 4.5 m/s, and no acceleration. Which option shows the final position of the object after 2 s?
The final position of the object after 2 s is 11 m.
Motion: This can be defined as the change in position of a body.
⇒ Formula:
x = x₀+v₀t+1/2(at²)........................ Equation 1⇒ Where:
x = Final position of the objectx₀ = Starting positionv₀ = Starting velocityt = timea = accelerationFrom the question,
⇒ Given:
x₀ = 4.5 m/st = 2 sx₀ = 2ma = 0 m/s²⇒ Substitute these values into equation 1
x = 2+(4.5×2)+1/2(0²×2)x = 2+9+0x = 11 mHence, The final position of the object after 2 s is 11 m
Learn more about motion here: https://brainly.com/question/15531840
What are the two types of force
Answer:
Forces can be divided into primarily into two types of forces:
Contact Forces. Non-contact Forces.Explanation:
A box of mass 7.7 - kg is accelerated from rest across a floor at a rate of 2.6 m/s2 for 18.5 s. Find the net work done on the box
Answer:
Explanation:
The net work will change the kinetic energy
W = ½mv² = ½m(at)² = ½ma²t²
W = ½(7.7)2.6²(18.5²) = 8907.3985 = 89 kJ
when do we say a curvilinear motion is accelerated?
Answer:
There always is an acceleration in a curvilinear motion, as the velocity vector changes, so always.
What capacitance is needed to store 3μC of charge at a voltage of 120V?
Answer:
C = 0.025F
Explanation:
Charge =q=3×[tex]10^{-6}[/tex]C
Voltage=V=120V
Q=CV
C=Q/V
=3×[tex]10^{-6}[/tex]/120
=1/40×[tex]10^{-6}[/tex]
C = 0.025F
C=2.5 [tex]10^{-4}[/tex]C 0r 25 ×[tex]10^{-3}[/tex]F
How is probability used in blood typing
Blood Type O AB
Probability 0.45 0.04
3. How much power does an electric light installation draw at 120 V if it creates a current of 0.8 amps?
O A. 32 watts
O B. 120 watts
Q C. 48 watts
D. 96 watts
Answer:D
Explanation:
R =
V
I
=
120 volt
0.8 ampere
= 150 ohm (Ω)
P = V × I
= 120 volt × 0.8 ampere
= 96 watt (W)
An electric light installation can draw Power of 96 Watt at 120 V if it creates a current of 0.8 amps
What is electric power ?Electric power is the rate of electric energy transfer by an electric circuit per unit time . It is denoted by P and measured using the SI unit of power that is Watt (W)
since, Electric Power = voltage * current
Power = 120 V * 0.8 A
Power = 96 Watts
An electric light installation can draw Power of 96 Watt at 120 V if it creates a current of 0.8 amps
learn more about Electric power
https://brainly.com/question/16925887?referrer=searchResults
#SPJ3
Suppose a bulldozer is being hauled at 50 km/h to a construction site on the back of a flatbed truck. From which reference point would the bulldozer not appear to be moving?
Answer:
from someone watching the bulldozer from the cab of the truck or from elsewhere on the flatbed.
Explanation:
Consider the following force:
A horse is pulling forward on a wagon with a force of 200 N.
According to Newton's third law, what other force must be happening?
The horse is pushing backward on the wagon with a force of 200 N.
The ground is pushing backward on the horse with a force of 200 N.
The wagon is pulling backward on the horse with a force of 200 N.
1. The acceleration equation of a certain particle is a=2t, after 4s, its velocity reaches 20m/s, then the initial velocity of the particle movement is ) ms B Sms 2.
Answer:
Change in velocity is the integral of all the differential accelerations acting over the period of acceleration.
[tex]20 = u + \int\limits^4_0 {2t} \, dt[/tex]
20 = u + t²[tex]\left \{ {{4} \atop {0}} \right.[/tex]
20 = u + 4² - 0²
20 = u + 16
u = 4 m/s
An LED is useful because when a current passes through it, it gives out... what?
Enter your answer
An LED is useful because when a current passes through it, it gives out light.
An LED is useful because when a current passes through it, it gives out Light.
What is an LED?
LED, in full light-emitting diode, in electronics, a semiconductor device that emits infrared or visible light when charged with an electric current.
A light-emitting diode (LED) emits light by applying a forward current to the pn junction of a compound semiconductor.
When forward current is passed through the light-emitting diode, carriers (electrons and holes) move. The holes in the p-type region move to the n-type region and the electrons in the n-type region move to the p-type region. The injected carriers recombine, and the energy difference before and after recombination is released as light. The emitted light depends on the energy band gap (Eg) of the compound semiconductor.
Learn more about light-emitting diode
https://brainly.com/question/12286583?referrer=searchResults
#SPJ2
the book has a mass of 2.5 kg. What net force must act on the book to mak it accelerate to the left at a rate of 7.0m/s2?
Answer:
17.5 N
Explanation:
Given :Mass (m) = 2.5 kgAcceleration (a) = 7.0 m/s²To calculate :Force exerted (F)Calculation :• F = ma→ F = (2.5 × 7.0) N
→ F = 25/10 × 7 N
→ F = 5/2 × 7 N
→ F = (5 × 7)/2 N
→ F = 35/2 N
→ F = 17.5 N towards left
Hence, 17.5 N of net force must act on the book to make it accelerate to the left.
Transverse waves move particles back and forth along the same direction in which the waves travel.
True false question.
True
False
Answer:
False, I am pretty sure.
Explanation:
Transverse waves are always characterized by particle motion being perpendicular to wave motion. ... As a sound wave moves from the lips of a speaker to the ear of a listener, particles of air vibrate back and forth in the same direction and the opposite direction of energy transport.
If a force of 20kn acts on a circular rod of a diameter 10mm, calculate the stress of the rod
σ = F/A = F/ (πD²/4) = 20000 / (π0.10²/4) = 2.55 MN/m²
compare and contrast a transverse wave and a compressional wave Give an example for each type
Answer:
Transverse waves oscillate perpendicular to the direction of the wave (e.g. any electromagnetic wave like radiowaves, x-rays...) whilst compressional waves oscillate in the same direction of the wave (e.g. sound waves)
Explanation:
True or False. Isaac at first resisted his father's command to be the sacrifice.
A 3.1 kg ball is dropped from the top of a 38 m tall building. What is the speed of the ball when it is halfway from the building to the ground? Round your answer to 2 decimal places.
Answer:
19.3m/s
Explanation:
Use third equation of motion
[tex]v^2-u^2=2gh[/tex]
where v is the velocity at halfway, u is the initial velocity, g is gravity (9.81m/s^2) and h is the height at which you'd want to find the velocity
insert values to get answer
[tex]v^2-0^2=2(9.81m/s^2)(38/2)\\v^2=9.81m/s^2 *38\\v^2=372.78\\v=\sqrt[]{372.78} \\v=19.3m/s[/tex]
A 30.0 kg child, initially at rest, slides down a 2.0 m tall slide. The child reaches the bottom of the slide with a speed of 6 m/s. There is friction between the child and the slide. Write a Law of Conservation of Energy equation to represent the transfer of energy from the top of the slide to the bottom. a. b. Use the equation from part (b) to calculate the energy dissipated by friction between the slide and the child? (g = 9.81 m/s) = 13
Answer:
Explanation:
Total energy is constant
E = mgh + ½mv² + Fd
At the top of the slide, all energy is potential
E = mgh + 0 + 0
At the bottom of the slide, all potential energy has converted to kinetic and work of friction.
mgh = ½mv² + W
W = mgh - ½mv²
W = 30.0[(9.81)(2.0) - ½6²]
W = 48.6 J
explain how gravitational erosion changes landforms
Answer:
Gravity can pull soil, mud, and rocks down cliffs and hillsides.
Explanation:
Gravity is responsible for erosion by flowing water and glaciers. But gravity also causes erosion directly. This type of erosion and deposition is called mass wasting.
Answer:
Erosion is another geological process that creates landforms. When mechanical and chemical weathering breaks up materials on the Earth's surface, erosion can move them to new locations. For example, wind, water or ice can create a valley by removing material. This can create new landforms.Explanation:
Hope this helps !!A stone of mass m = 1.05 kg is released from a height of h = 2.1 m into a pool of water. At a time of t = 1.83 s after hitting the surface of the water, the stone's velocity has decreased by 50%.
What is the magnitude of the average force the stone experiences, in newtons, during the time t?
Answer:
Explanation:
ignoring air resistance, the kinetic energy at water impact will equal the potential energy converted
½mv² = mgh
v = √(2gh)
v = √(2(9.81)2.1) = 6.4188... m/s
after impact, an impulse will result in a change of momentum.
There is a downward impulse due to gravity equal to the weight of the stone and an upward average force due to water resistance and buoyancy force.
FΔt = mΔv
(F - mg)Δt = m(vf - vi)
(F - mg) = m(vf - vi)/Δt
F = m(vf - vi)/Δt + mg
F = m((vf - vi)/Δt + g)
F = 1.05(((½(-6.4188) - -6.4188)/ 1.83) + 9.81)
F = 12.14198...
F = 12.1 N
The magnitude of the average force the stone experiences, will be 12.1 N.
What is force?Force is defined as the push or pulls applied to the body. Sometimes it is used to change the shape, size, and direction of the body. Force is defined as the product of mass and acceleration. Its unit is Newton.
The given data in the problem is;
m is the stone mass = 1.05 kg
The height is h, = 2.1 m i
The time is, t = 1.83 s
Velocity decreased by 50%.
From the law of conservation of energy the kinetic energy is equal to the potential energy;
[tex]\rm \frac{1}{2} mv^2 = mgh \\\\ v = \sqrt{2gh}\\\\ v = \sqrt{2 \times 9.81 \times 2.1 } \\\\ v= 64188 \ m/sec.[/tex]
From Newton's second law of motion, the impulsive force is equal to the change in momentum;
[tex]\rm F \triangle T = m \traingle v \\\\ (F - mg) = \frac{v_f-v_i}{\triangle t } \\\\ F = \frac{v_f-v_i}{\triangle t } + mg \\\\ F =m\frac{v_f-v_i}{\triangle t + g} \\\\ F= 12.14 98 \\\\ F=12.1 N[/tex]
Hence the magnitude of the average force the stone experiences, will be 12.1 N.
To learn more about the force refer to the link;
https://brainly.com/question/26115859
14. Earthworms are crucial for forming soil. As they search for food by digging tunnels,
they expose rocks and minerals to the effects of weathering. Over time, this process
creates new soil. Worms are not the only living things that help to create soil. Plants
also play a part in the weathering process. As the roots of plants grow and seek out
water and nutrients, they help to break large rock fragments into smaller ones. Have
you ever seen a plant growing in a sidewalk? As the plants grows, its roots spread into
tiny cracks in the sidewalk. These roots apply pressure to the cracks, and, over time,
the cracks become larger, ice wedging can occur more readily. As the cracks expand,
more water can flow into them. When the water freezes, it expands and presses against
the walls of the cracks, which makes the cracks larger. Over time, the weathering
caused by water, plants, and worms help to form soil. QUESTION: Ice wedging, as
described in the passage, is an example of which of the following?
A mechanical weathering
B. Oxidation
C. chemical weathering
D. Hydrolysis
Ice wedging, as described in the passage, is an example of mechanical
weathering.
Mechanical weathering is also known as physical weathering and it
involves the breaking of rock into smaller particles without causing changes
in the chemical properties.Mechanical weathering is usually carried through
physical processes such as freezing and thawing etc.
In this scenario, we were told that water freezes, expands and presses
against the walls of the crack thereby breaking into smaller parts which is a
physical process hence mechanical weathering being present.
Read more about Mechanical weathering on https://brainly.com/question/458304
Q1) Assertion : a vector can be resolved into maximum two components
Reason : in projectile motion the velocity is resolved into vertical and horizontal components
a) Both A and R are correct; R is the correct explanation of A
b) Both A and R are correct; R is not correct explanation of A
c) A is correct; R is not correct
d) A is not correct; R is correct
Q2) Assertion : speed is constant in uniform circular motion
Reason : acceleration is constant in uniform circular motion
a) Both A and R are correct; R is the correct explanation of A
b) Both A and R are correct; R is not correct explanation of A
c) A is correct; R is not correct
d) A is not correct; R is correct
Answer:
Explanation:
Q1) d) A is not correct; R is correct (sort of) but is not the reason for A.
A vector may be resolved into an infinite number of components.
Breaking a projectile motion into the vertical and horizontal components is the EASIEST way to solve it because acceleration can be assumed to be constant in both directions. Zero for horizontal and g(ravity) in the vertical. However it is not the ONLY way to do it. Other ways are much more complex.
Q2) a) Both A and R are correct; R is the correct explanation of A (sort of)
A is correct. Speed is constant in uniform circular motion.
R is correct if you call CENTRIPETAL acceleration constant. It is only constant in magnitude. The direction is always changing as the vector always points toward the center of rotation.
What is the relationship between and experiment and a hypothesis
Answer:
an experiment is a way to test a hypothesis. A hypothesis is a prediction. You predict that if you change one thing (the independent variable) the other thing (the dependent variable) will change.
Would you die if you take the car keys out of the ignition and throw them in the back seat while you coast down a mountain-side in an attempt to save fuel and look cool for the girl in said back seat.
Answer:
bro what.
Explanation:
... is this an actual physics question?
The potential difference between the (high-voltage) inner shell of a Van de Graaff accelerator and a point where the charge is injected into the moving belt is 3.4 MV. What is the minimum power required to pull the belt when the belt transfers the charge to the case at 2.8 mC/s?
Explanation:
this is the answer to the questions
A rollercoaster accelerates from 10 m/s to 100 m/s2 for 25 seconds. What is the acceleration?
Answer:
A roller coasters accelerates from an initial velocity of of 6.0 m/s to a final velocity of 70 m/s over 4 seconds. What's the acceleration? Q. Acceleration only takes place when things speed up. Q. A drag racer accelerated from 0 m/s to 200 m/s in 5 s.
Explanation:
Which type of muscle cell can have multiple nuclei
Answer:
Skeletal Muscle cells
Skeletal muscle cells are long, cylindrical, and striated. They are multi-nucleated meaning that they have more than one nucleus. This is because they are formed from the fusion of embryonic myoblasts.
Answer:
skeletal muscle cells can have multiple nuclei
Explanation:
This is because they are formed from the fusion of embryonic myoblasts.
Which combination of three concurrent forces acting on a body could not produce equilibrium?
1
1 N, 3N, EN
2
2 N, 2N, 2N
.
3.
3 N, 4N, EN
4.
4N, 4N, 5N
All the three concurrent forces acting on a body will not produce equilibrium.
The given parameters:
1. 1 N, 3 N and 5 N
2. 2N, 2N and 2 N
3. 3N, 4N and 5 N
4. 4N, 4N and 5 N
Concurrent forces lie on the same plane and their line of action pass through a common point.
A body under concurrent forces is in equilibrium if the resultant of the forces on the body is zero.
[tex]\Sigma F = 0\\\\F_1 + F_2 + F_3 = 0\\\\F_1 + F_ 2 = - F_3[/tex]
where;
[tex]F_3[/tex] is the equilibrant force
First set of concurrent forces;
[tex]1 \ N \ + \ 3\ N = 4 \ N\\\\F_ 3 = 5 \ N\\\\5 \ N > 4 \ N[/tex]
Second set of concurrent forces;
[tex]2 \ N \ + \ 2 \ N = 4 \ N\\\\F_ 3 = 2 \ N\\\\4 \ N > 2 \ N[/tex]
Third set of concurrent forces;
[tex]3 \ N \ + \ 4 \ N = 7 \ N\\\\F_ 3 = 5 \ N\\\\7 \ N > 5 \ N[/tex]
Fourth set of concurrent forces;
[tex]4 \ N \ + \ 4 \ N = 8 \ N\\\\F_ 3 = 5 \ N\\\\8 \ N > 5 \ N[/tex]
Thus, we can conclude that all the three concurrent forces acting on a body will not produce equilibrium.
Learn more about concurrent forces here: https://brainly.com/question/20165540
As a truck rounds a curve, a box in the bed of the truck slides to the side farthest from the center of the curve. This movement of the box is a result of
Answer:
inertia .
because yes