When a pot of water sits on a hot stove the metal is He did and then transferred into heat to the world of student claims that conduction is the only type feet transfer occurring which statement explains why the students idea is incorrect

Answers

Answer 1

Answer:

Hello your question is poorly written hence I will just give the difference between conduction and convection

answer :

Conduction occurs when there is direct contact between solids and source of heat. while convection occurs when there is transfer of thermal energy due to movement of liquid or gas

Explanation:

when a pot of water is placed on a hot stove the pot is heated through conduction because the metal pot is in direct conduct with the heat from the stove ( which is the primary source of heat in this scenerio ).

while the heat transfer from the hot pot to the water is executed through convection this is because heat transfer via convection requires the movement of liquid or gas.  as the warmer liquid moves over to the top the cooler liquid goes below inside the pot that way the whole liquid becomes warm .


Related Questions

the unit of force is the
backhaus
Einstein
newton
kilogram ​

Answers

Answer:

the answer is a C a newton

A 90° elbow in a horizontal pipe is used to direct water flow upward at a rate of 40 kg/s. The diameter of the entire elbow is 10 cm. The elbow discharges water into the atmosphere, and thus the pressure at the exit is the local atmospheric pressure. The elevation difference between the centers of the exit and the inlet of the elbow is 50 cm. The weight of the elbow and the water in it is considered to be negligible. Determine (a) the gage pressure at the center of the inlet of the elbow and (b) the anchoring force needed to hold the elbow in place. Take the momentum-flux correction factor to be 1.03 at both the inlet and the outlet.

Answers

Answer:

(a) The gauge pressure is 4,885.3 Pa

(b) The anchoring force needed to hold the elbow in place is approximately 296.5 N

The direction of the anchoring force is approximately ≈ 134.8

Explanation:

The given parameters in the fluid dynamics question are;

Pipe elbow angle, θ = 90°

The mass flowrate of the water, [tex]\dot m[/tex] = 40 kg/s

The diameter of the elbow, D = 10 cm

The pressure at the point of discharge of the fluid = Atmospheric pressure

The elevation between the inlet and exit of the elbow, z = 50 cm

The weight of the elbow and the water = Negligible

(a) The velocity of the fluid, v₁ = v₂ = v is given as follows;

ρ·v·A = [tex]\dot m[/tex]

v = [tex]\dot m[/tex]/(ρ·A)

Where;

ρ = The density of the fluid (water) = 997 kg/m³

A = The cross-sectional area of the of the elbow = π·D²/4 = π×0.1²/4 ≈ 0.00785398163

A = 0.00785398163 m²

v = 40 kg/s/(0.00785398163 m² × 997 kg/m³) ≈ 5.1083 m/s

Bernoulli's equation for the flow of fluid is presented as follows;

[tex]\dfrac{P_1}{\rho \cdot g} +\dfrac{v_1}{2 \cdot g} + z_1 = \dfrac{P_2}{\rho \cdot g} +\dfrac{v_2}{2 \cdot g} + z_2[/tex]

v₁ = v₂ for the elbow of uniform cross section

P₁ - P₂ = ρ·g·(z₂ - z₁)

P₁ - P₂ = The gauge pressure = [tex]P_{gauge}[/tex]

z₂ - z₁ = z = 50 cm = 0.5 m

∴ [tex]P_{gauge}[/tex] = 997 kg/m³ × 9.8 m/s² × 0.5 m = 4,885.3 Pa

The gauge pressure, [tex]P_{gauge}[/tex] = 4,885.3 Pa

(b) The forces acting on the elbow are;

[tex]F_{Rx}[/tex] + [tex]P_{gauge}[/tex]·A = -β·[tex]\dot m[/tex]·v

[tex]F_{Ry}[/tex]  = β·[tex]\dot m[/tex]·v

∴ [tex]F_{Rx}[/tex]  = -β·[tex]\dot m[/tex]·v -  [tex]P_{gauge}[/tex]·A

[tex]F_{Rx}[/tex]  = -1.03 × 40 kg/s × 5.1083 m/s -  4,885.3 Pa × 0.00785398163 m² ≈ -208.83 N

[tex]F_{Ry}[/tex]  = 1.03 × 40 kg/s × 5.1083 m/s = 210.46196 N

The resultant force, [tex]F_R[/tex], is given as follows;

[tex]F_R[/tex] = √([tex]F_{Rx}[/tex]² + [tex]F_{Rz}[/tex]²)

∴ [tex]F_R[/tex] = √((-208.83)² + (210.46196)²) ≈ 296.486433934

Therefore;

The anchoring force needed to hold the elbow in place, [tex]F_R[/tex] ≈ 296.5 N

The direction of the anchoring force, θ

[tex]\theta = tan^{-1}\left( \dfrac{F_{Ry}}{F_{Rx}} \right)[/tex]

∴ θ = arctan(210.46196/(-208.83)) = -45..2230044°

θ = 180° + -45.2230044° = 134.7769956°

∴ The direction of the anchoring force is approximately, θ ≈ 134.8°

Which of the following statements about Australian football is TRUE?
A.
The players tend to wear a large amount of padding.
B.
Goals are scored by kicking the ball through goalposts.
C.
Each team has a number of set plays for both offense and defense.
D.
The constant movement of the ball is similar to baseball.

Answers

Answer:

B.

Goals are scored by kicking the ball through goalposts.

Explanation:

What is the frequency of a light with the wavelength of 5.00 x 102 m?

Answers

Answer:

510 meters

Explanation:

That is sort of a math question but with the meters and wavelength, it's both a physical and a math question. Don't worry, i won't report (Unless you report my answer)

Please help me and get 15 points and Brainlessly!!!!!!!
Bauxite is the chief ore from which aluminum is extracted. Which of these statements is correct about bauxite? (15 points)
Group of answer choices

It has a definite crystal structure.

It does not have a definite chemical composition.

Its atoms do not arrange themselves in a definite order.

Its molecules are made up of a different number of atoms.

Answers

Answer:

A

Explanation:

Bauxite is the primary mineral from which aluminum is produced. The ore must first be cleaned before the metal can be electrolytically reduced out of it. Thus, option A is correct.

What Bauxite is the chief ore from which aluminum?

Bauxite normally has a Mohs hardness of 1 to 3 and is a soft substance. Its color ranges from white to gray to reddish-brown and has a pisolitic structure. It also has an earthy gloss and a specific gravity of 2.0 to 2.5. These characteristics help distinguish bauxite, although they have no bearing on its worth or potential uses.

Typically, aluminum is manufactured in regions with relatively low electricity costs. An abrasive substance is bauxite.

Therefore,  Bauxite is crushed to a fine powder and then fused at a very high temperature to form spherical beads, creating sintered bauxite, which is frequently used as a sand-blasting abrasive.

Learn more about Bauxite here:

https://brainly.com/question/4372634

#SPJ2

A student is sitting in a chair and not moving, however, there are forces acting on her. What must be trust about the forces acting on the student?

Answers

Answer: It is trusted that the sum of all forces acting on the student, adds up to zero the student is not moving.

Explanation: the plane they give you that the plane is moving at a constant velocity of 250 m/s this means that the acceleration is zero, we substituted in the formula F=ma which will give us the Force. And knowing that its constant speed, forward force is then equal to the Air resistance. Hence we find the Air resistance force

What might you be doing if you measure your heart rate and find that it beats 100 times in a minute?

Answers

Answer:

Rigorous exercise

Explanation:

For your heart rate is been around 100 bpm you should be doing a rigorous exercise . but if ain't doing any rigorous exercise and your heart rate is constantly above 100 bpm you should consult your doctor.

An average heart is between 60 bpm to 100 bpm.

Calcular la densidad absoluta de un fluido cuya masa es de 12.8 kg y que ocupa un volumen de 16.3 cm

Answers

Answer:

[tex]d=785.27\ g/cm^3[/tex]

Explanation:

The question says that, "Calculate the absolute density of a fluid whose mass is 12.8 kg and which occupies a volume of 16.3 cm³".

Mass, m = 12.8 kg = 12800 g

Volume, V = 16.3 cm³

The density of an object is defined as the mass per unit volume i.e.

[tex]d=\dfrac{m}{V}\\\\d=\dfrac{12800}{16.3}\\\\d=785.27\ g/cm^3[/tex]

So, the absolute density of the fluid is equal to [tex]785.27\ g/cm^3[/tex].

Someone help me extra points & brainlest

Answers

Answer:

75 m

Explanation:

I need help with this question it's science

Answers

What is the question?
I CANT SEE THE QUESTION

Why do Tectonic Plates move?

A) convection currents in the atmosphere
B) convection currents in the crust
C) convection currents in the asthenosphere
D) Convection currents in the core

Answers

The answer is d because the intense heat in the earth cores that causes the molten rock in the mantle layer to move

Answer:

c. convection currents in the asthenosphere

Explanation:

A submarine dives at an angle of 30.0o with the horizontal and follows a straight-line path for a total distance of 50.0 m. What distance is the submarine below the surface of the water?

Answers

Answer:

25 m

Explanation:

The submarine dives at angle of 30 degree with the horizontal . It has travelled 50 m at this angle . So , it will have both 25 horizontal as well as vertical displacement below the surface .

vertical displacement below the surface = vertical component of displacement of 50 m

= 50 sin30

= 25 m .

Depth of submarine below the surface = 25 m.

number of atoms of each element potassium chlorate?​

Answers

5 atoms is the answer

Marcus tries to move a refrigerator but can't. Has he done work?

A) Yes, because he used energy.
B) Yes, because he exerted a force.
C) No, because he did not move the object.
D) No, because he did not use energy.

Answers

Answer:

A

Explanation:

Even if the refrigerator did not move he still used energy to try to push it it's just his energy wasnt stronger than the refrigerator's energy

what does point c represent

Answers

Explanation:

point c is minimum Amplitude in transversal wave

I WILL GIVE U BRAINLIST layers: Earth:: ___: the Sun
A: Milky Way galaxy
B: Zero gravity
C: Solid surface
D:Gas

Answers

Answer:

There are layers on the Earth.  There is gas on the Sun.

This means that the answer is...

D: Gas

i need help with this question really urgent

Answers

Answer:

Cost Per Hour:

132.0000

Cost Per Day:

39600.0000

Cost Per Month:

1204632.00

Cost Per Year:

14455584.00

kWh Per Day:

3600.00

What is the name of the force that opposes, or the opposite of gravity ???!!

Answers

Answer:

Tension.

tension is the name of force that opposes or goes opposite of gravity

Hope this helps!

Answer: Friction

Explanation: Friction opposes gravity and any motion in two surfaces.

Hope This Helped, Have A Great Day!

If a car accelerates from rest at a constant 4 m/s
, how long will it take for the car to reach a
velocity of 28 m/s?​

Answers

Answer:

Time, t = 7 seconds.

Explanation:

Given the following data;

Initial velocity = 0m/s (since it is starting from rest).

Acceleration, a = 4 m/s²

Final velocity, v = 28 m/s

To find the time, we would use the first equation of motion given by the formula;

V = u + at

Substituting into the formula, we have;

28 = 0 + 4*t

28 = 4t

Time, t = 28/4

Time, t = 7 seconds.

A5.0 kg TNT explosive, initially at rest, explodes into two pieces. One of the pieces weighing 2.0 kg flies off to

the left at 36

What is the final speed of the remaining piece?

Answers

Answer:

v = 24 m/s, rightwards

Explanation:

Given that,

The mass of TBT explosive = 5 kg

It explodes into two pieces.

One of the pieces weighing 2.0 kg flies off to  the left at 36 m/s. Let left be negative and right be positive.

The law of conservation of momentum holds here. Let v be the final speed of the remaining piece. So,

[tex]5\times 0=2\times (-36)+3\times v\\\\-72=-3v\\\\v=24\ m/s[/tex]

So, the final speed of the remaining piece is 24 m/s and it is in the right direction.

Someone help me & extra pointsss!

Answers

Answer:

117.43 m

Explanation:

Eg=mgh=13x9.81xh=127.53h(N)

Ek=0.5mv^2=0.5(13)(48)^2=14,976 N

by conservation of potenial energy:

Ei=Ef

127.53h=14976

h=117.43m

Which part of and organism is preserved in cast and mold fossils

Answers

Answer:

bones

Explanation:

Bones are is preserved in cast and mold fossils.

Normally the other 'parts of the body' like muscles, ligaments, blood and organs are soft.

Answer:

bones

Explanation:

What kind of energy involves the flow of positive charges?

thermal
radiant
electrical
nuclear

Answers

Electrical

Electrical would be the energy that involves the flow of positive changes

Answer:

Electrical

Explanation:

Electrical would be the energy that involves the flow of positive charges.

can someone help me with this please what are the two correct answers??​

Answers

Answer:

The answers should be B and D

Explanation:

I hope this helps!

The answers are B and D

which diagram represents the greatest magnitude of displacement for an object

Answers

Answer: if every arrow=1m do 1 times 1 times 1 times 1

Explanation:

(p.s. it equals 1 meter in area 4 meters in perimeter)


Explain how air exerts a pressure​

Answers

air exert a pressure take a glass and put the water on it and small piece a paper and glass take downword and observe it so tha air exert pressure

An alien from the newly discovers planet nine weighs himself on his planet and finds his weight to be 3200 N. When he stoves on earth he once again weighs himself and find his aight to be 800 N. What is the acceleration due to gravity on planet 9?

Answers

Answer:

2.45 m/s²

Explanation:

From the question,

On the Earth

W = mg.................. Equation 1

Where W = weight of the alien on the earth, m = mass of the alien on the earth, g = acceleration due to gravity of the earth.

Make m the subject of equation 1

m = W/g................... Equation 2

Given: W = 3200 N

Constant: 9.8 m/s²

Substitute these value into equation 2

m = 3200/9.8

m = 326.5 kg.

Similarly,

On planet 9,

W' = mg'............... Equation 3

Where W' = weight of the alien on planet 9, g' = acceleration due to gravity on planet 9.

make g' the subject of the equation

g' = W'/m............ Equation 4

Given: W' = 800 N

Substitute into equation 4

g' = 800/326.5

g' = 2.45 m/s²

A plane travels 4.0 km at an angle of 25◦ to the ground, then changes direction and travels 10 km at an angle of 16◦ to the ground. What is the magnitude of the plane's total displacement? Answer in units of km.

Answers

Answer:

6.1 km

Explanation:

Given that a plane travels 4.0 km at an angle of 25◦ to the ground, then changes direction and travels 10 km at an angle of 16◦ to the ground. What is the magnitude of the plane's total displacement? Answer in units of km

The magnitude of the total displacement D can be calculated by using cosine formula

Ø = 25 - 16 = 9 degree

D^2 = 4^2 + 10^2 - 2 × 4 × 10 × cos 9

D^2 = 16 + 100 - 80cos9

D^2 = 116 - 79.02

D = sqrt( 36.98)

D = 6.1 m

Therefore, the magnitude of the plane's total displacement is 6.1 km

Which statement compares the attractive forces that hold particles together?

A. Covalent bonding and Van der Waals forces join separate
molecules together, while ionic and hydrogen bonding produce
compounds.
B. Covalent and hydrogen bonding produce compounds, while ionic
bonding and Van der Waals forces join separate molecules
together.
C. lonic and covalent bonding produce compounds, while hydrogen
bonding and Van der Waals forces join separate molecules
together.
D. Ionic and covalent bonding join separate molecules together, while
hydrogen bonding and Van der Waals forces produce compounds.

Answers

Answer:

Ionic and covalent bonding produce compounds, while hydrogen bonding and Van der Waals forces join separate molecules together.

Ur welcome:)

Answer:

C) lonic and covalent bonding produce compounds, while hydrogen bonding and Van der Waals forces join separate molecules together.

Explanation:

What are some ways scientists can study the seafloor?

Answers

Answer: A device records the time it takes sound waves to travel from the surface to the ocean floor and back again. Sound waves travel through water at a known speed. Once scientists know the travel time of the wave, they can calculate the distance to the ocean floor.

Explanation:

Other Questions
what four of the qualities required for a health relationship What is the solution to this equation?--5(s -- 30) = -10O A. S = -4B. S = 8O C. s = 28O D. s = 32Pls help ! 11x + 4y = 32x = -2y - 2 The welding department supplies parts to the final assembly line. Management decides to implement a kanban system and has collected the following data: The daily demand is 2500 units. The production lead time is 3 days (this includes processing time, transport time, and waiting time). Management has decided to have 1.5 days of safety stock. One container fits 250 units.How many kanban containers will be needed to support this system? WILL GIVE BRAINLIST FOREALS JUST ANSWER QUICKY I PROMISE Brianna can rent a scooter for $15.00 plus $0.50 per mile. Question 1 Part A Write an equation in which t is the cost to rent a scooter and m is the number of miles she rode the scooter. Enter the correct answer in the box A shipping container will be used to transport several 100-kilogram crates across the country by rail. The greatest weight that can be loaded into the container is 27500 kilograms. Other shipments weighing 6800 kilograms have already been loaded into the container. Write and solve an inequality which can be used to determine xxx, the number of 100-kilogram crates that can be loaded into the shipping container. Which ratio is equivalent to 22 : 11 ?1 : 22 : 12 : 4466 : 44 please help i will give brainliest 1. Elle ____demande de jouer au tennis avec elle. (me)2. ric et Thierry ____demandent des gteaux et des crpes. (her)3. Tu ne ____donnes pas de stylos. (us)4. Je ____demande d'apporter des fleurs. (you, fam.)5. Ils ne ______rpondent pas. (you, form.)6. Le professeur _____pose des questions en classe. (them)7. Tu vas _____parler demain matin. (him)8. Est-ce que vous ____avez parl de la fte samedi soir? (me)9. Je vais ___ envoyer des photos de mes vacances. (you, fam.)10. Elles _____tlphonent pour leur anniversaire. (them) How would an increase in taxes influence the size of the multiplier in a four sector model Please help I will mark you brainliest ! Add-10 + 5=Add. -19 + -6 solve the simultaneous equations 3 x - 5 y = 5 ,x + 10y= 4 Which of these is a compound? A. Na B. Cl C. NaCl D. C Who was the lowest social class in colonial Central America?IndiansSpanish born in SpainSpanish born in Central Americamestizos In at least two sentences, explain the three components of citizenship. hi please help ill give brainliest please point c and point d are plotted on the graph. plot points a and b to form rectangle abdc with an area of 36 square units. plot point e at (2, 4). explain why it is important to follow a course or a program in keeping with your value system Identify at least two similarities and two differences between installment plans of the 1920s and credit cards of today.