When a narrow laser beam passes through a fine wire mesh before arriving at the wall, it forms a complicated pattern of bright spots on the wall. This pattern of spots would not occur if you sent a flashlight beam through the mesh because light from the flashlight is not a single electromagnetic wave. cannot be sent through a single opening of the mesh. is horizontally polarized, while laser light is vertically polarized. is vertically polarized, while laser light is horizontally polarized.

Answers

Answer 1

Answer:

this pattern to occur there must be coherence in the light beams.

you use a flashlight, the rays are incoherent so diffraction patterns cannot occur.

Explanation:

The point pattern that appears in the wall is the result of the interference and diffraction processes through each space of the mesh, for this pattern to occur there must be coherence in the light beams.

The coherence process is that all the rays have the same constant and phase, before the appearance of the lasers, the light is stopped by a small opening and this ray is the one that passes through the slits, with the appearance of the laser this it is consistent from its production process, so opening is not necessary, with this there is much greater intensity and the measurement process is simplified.

When you use a flashlight, the rays are incoherent so diffraction patterns cannot occur.

Polarization has no effect on diffraction patterns so it does not matter if it is vertical or horizontal.


Related Questions

The volume of a piece of rock was 18.0 cm^3. The student measured the mass of the piece of rock as 48.6 g. Calculate the density of the rock in g/cm^3.

Answers

Answer:

Density of rock piece = 2.7 g/cm³

Explanation:

Given:

Volume of rock piece = 18 cm³

Mass of rock piece = 48.6 gram

Find:

Density of rock piece

Computation:

We know relation between density, mass and volume,

Density = Mass / Volume

Density of rock piece = Mass of rock / Volume of rock

Density of rock piece = 48.6 / 18

Density of rock piece = 2.7 g/cm³

NO LINKS PLEASE; On the calendar, the full moon is shown happening on the eleventh of the month. What moon would you see around the date shown with the question mark?

First Quarter

New Moon

Waxing Crescent

Waning Gibbous

Answers

Wanning gibbous

hope it helps u

Plz mrk me brainlest

How many tons and pounds (like together, not two different numbers) is 9,920 pounds? Please help,

Answers

Answer:

About 5 tons (4.96)

Two creatures sit on a horizontal frictional rotating platform. The platform rotates at a constant speed. The creatures do not slip off as it rotates.


ASSUME:

Red has a mass of 5 kg

Red is 1.5 m from the center

Red has a speed of 9 m/s

Blue has a mass of 25 kg

Blue has a speed of 1.8 m/s

The force of friction on Red is EQUAL to the force of friction on Blue





DETERMINE:

How far from the center is Blue

Answers

Answer:

M v^2 / R = centripetal force

For Red: M v^2 / R = 5 * 9^2 / 1.5 = 270

For Blue M v^2 / R = 270 = 25 * 1.8^2 / Rb

So Rb = 25 * 1.8^2 / 270 = .3 m

Philosophy:The Big Picture Unit 7
Why does Marx’s workers’ paradise resolve the problems of capitalism?
I KNOW C IS INCORRECT SO CHOOSE OUT OF A,B OR D
A. Everything is free, and no one has to work.
B. Workers are divided into three classes, much like in Plato’s ideas.
C. There is no currency in the paradise so no economic problems.
D. People work for their own good instead of a factory owner’s.

Answers

Answer:

B

Explanation:

If you cross of what you don't think are the answers then it makes it easier to narrow it down to what the answers are.

Hope this helps!

What is the centripetal force for a roller coaster if the mass is 10 kg and the normal force is 25 N?

Answers

Answer:

Fc = 123 Newton

Explanation:

Net force can be defined as the vector sum of all the forces acting on a body or an object i.e the sum of all forces acting simultaneously on a body or an object.

Mathematically, net force is given by the formula;

[tex] Fnet = Fapp + Fg[/tex]

Where;

Fnet is the net force.

Fapp is the applied force.

Fg is the force due to gravitation.

Given the following data;

Normal force = 25N

Mass = 10kg

To find the centripetal force;

From the net force, we have the following formula;

Fc = N + mg

Where;

Fc is the centripetal force.

N is the normal force.

mg is the the weight of the object.

Substituting into the formula, we have;

Fc = 25 + 10(9.8)

Fc = 25 + 98

Fc = 123 Newton

If two speeds are in exact opposite directions, the combined speed is the difference in the speeds.

A. True
B. False

Answers

B. False if the speeds are going different directions there speed shall be different
It’s totally false ♥️

arcsin 0.9331 in degrees​

Answers

Answer:

68.9233231661

Explanation:

Just put it into your calculator, shift sin should do it but it will come up like this: [tex]sin^{-1}[/tex] which is the same as arcsin

Learning Goal: To understand the concept of moment of inertia and how it depends on mass, radius, and mass distribution.
In rigid-body rotational dynamics, the role analogous to the mass of a body (when one is considering translational motion) is played by the body's moment of inertia. For this reason, conceptual understanding of the motion of a rigid body requires some understanding of moments of inertia. This problem should help you develop such an understanding.
The moment of inertia of a body about some specified axis is I = cmr^2, where c is a dimensionless constant, m is the mass of the body, and r is the perpendicular distance from the axis of rotation. Therefore, if you have two similarly shaped objects of the same size but with one twice as massive as the other, the more massive object should have a moment of inertia twice that of the less massive one. Furthermore, if you have two similarly shaped objects of the same mass, but one has twice the size of the other, the larger object should have a moment of inertia that is four times that of the smaller one.
Two spherical shells have their mass uniformly distrubuted over the spherical surface. One of the shells has a diameter of 2 meters and a mass of 1 kilogram. The other shell has a diameter of 1 meter. What must the mass m of the 1-meter shell be for both shells to have the same moment of inertia about their centers of mass?

Answers

Answer:

 m₂ = 4 kg

Explanation:

The moment of inertia is defined by

         I = ∫ r² dm

for bodies with high symmetry it is tabulated, for a spherical shell

        I = 2/3 m r²

in this case the first sphere has a radius of r₁ = 2m and a mass of m₁ = 1 kg, the second sphere has a radius r₂ = 1m.

They ask what is the masses of the second spherical shell so that the moment of inertia of the two is the same.

        I₁ = ⅔ m₁ r₁²

        I₂ = ⅔ m₂ r₂²

They ask that the two moments have been equal

        I₁ = I₂

        ⅔ m₁ r₁² = ⅔ m₂ r₂²

         m₂ = (r₁ / r₂) ² m₁

let's calculate

         m₂ = (2/1) ² 1

         m₂ = 4 kg

Directions: Fill in the blank with the correct word. Choose from the list of possible answers in the word bank below:


atoms
compound
element
heterogeneous
homogeneous
mixture
molecule
particles
solution
suspension

1. An _______________ is made up of just one kind of atom.

2. Matter is made up of tiny _______________.

3. In a mixture called a ________________ the particles are larger and can settle out.

4. A _______________ of water is made up of two hydrogen atoms and one oxygen atom.

5. Two or more elements chemically combined form a _______________.

6. _______________ are the building blocks of matter.

7. Seawater is an example of a _______________ mixture because it is the same throughout.

8. Vegetable soup is an example of a _______________.

9. In a _______________ one substance is dissolved in another.

10. A mixture that is not the same throughout is called a _______________ mixture.

Answers

Answer:

1).atoms (3). mixture. (5). Element

2). particles (4). molecules (6). suspension

Explanation:

(7). Homogeneous (8). Heterogeneous

(9). compound (10). solutions

When silver nitrate and beryllium chloride react, silver chloride and beryllium nitrate form. What are the coefficients in this equation? (Note: Be sure to keep the reactants and products in the same order that they appear in the question.)
A. 2,1,1,2
B. 1,2,2,1
C. 1,2,1,2
D. 2,1,2,1 ​

Answers

Answer:

D. 2,1,2,1 ​

Explanation:

The equation of the reaction is; 2AgNO3 + BeCl2 + ---------》2AgCl + Be(NO3)2

The rule applied in balancing chemical reaction equation is that the number of atoms of each element on the reactants side must be the same as the number of atoms of the same element on the products sides.

If this rule is properly applied to the reaction between silver nitrate and beryllium chloride to form silver chloride and beryllium nitrate , the coefficients in the equation are;  2,1,2,1

What unit is current measured in?

Answers

What unit? I don’t see anything to help you answer.

An inventor claims to have developed a power cycle capable of delivering a net work output of 400 kJ for an energy input by heat transfer of 1200 kJ. The system undergoing the cycle receives heat from a source of 550K and rejects heat to a sink of 350K. Determine if this is a valid claim.

Answers

Answer: Valid claim

Explanation:

Given

Work output is [tex]W=400\ kJ[/tex]

Work input is [tex]Q=1200\ kJ[/tex]

The temperature of the source [tex]T_h=550\ K[/tex]

The temperature of the sink is [tex]T_l=350\ K[/tex]

Efficiency is given by

[tex]\eta =\dfrac{\text{W}}{\text{Q}}\times 100[/tex]

Insert the values

[tex]\Rightarrow \eta=\dfrac{400}{1200}\times 100\\\\\Rightarrow \eta=\dfrac{100}{3}\\\\\Rightarrow \eta=33.3\%[/tex]

For ideal cycle it is

[tex]\Rightarrow \eta=\dfrac{T_h-T_l}{T_l}\times 100\\\\\Rightarrow \eta=\dfrac{550-350}{550}\times 100\\\\\Rightarrow \eta=36.36\%[/tex]

The efficiency of the cycle is less than the ideal situation, therefore, it is valid claim.

a solid cubic centimeter of platinum weighs 21.5 N. if this cube of platinum is placed under water, what volume of water is displaced? what weight of water is displaced? (Hints: 1 cm3 of water has a mass of 1 gram; 1 gram weighs 0.0098 N; density of platinum = 21.5 g/cm3.)

Answers

Answer:

Mp =Pp g    where p = density of solid Platinum

Wp  = Mp Pp g     weight of mass M

Volume displaced is 1 cm^3

Weight of water = .0098 N   since 1 cm^3 displaced

Or Ww = 1 cm^3 * .001 kg / cm^3 * 9.8 N/kg = .0098 N

Which statement best describes covalent bonding?
A. two nonmetal atoms share electrons between them
B. many atoms give up electrons that can move among the atoms
C. two metal atoms share electrons between them
D. a metal atom transfers electrons to a nonmetal atom

Answers

A. Two nonmetal atoms share electrons between them. I’m taking chemistry, so i know.

A weight lifter lifts a 1470N barbell above his head from the floor the a height of 2m. he holds the barbell there for 5 sec. how much work does he do?

Answers

Answer:

Workdone = 2940 Nm

Explanation:

Given the following data;

Force = 1470 N

Distance = 2m

Time = 5 seconds

To find the work done;

Mathematically, workdone is given by the formula;

Workdone = force * distance

Substituting into the formula, we have;

Workdone = 1470 * 2

Workdone = 2940 Nm

Biodiversity decline poses a problem in an ecosystem because

Answers

Answer:

Biodiversity decline continues due to a rapidly expanding human population. Habitat is damaged in order to meet growing needs for agriculture, urban development, water and materials. Fish, wildlife and plants are overharvested, despite mounting evidence that many harvesting practices are unsustainable.

What does Binding Energy in the nucleus represent?

Answers

Answer:

Nuclear binding energy is the energy required to split a nucleus of an atom into its component parts: protons and neutrons, or, collectively, the nucleons. The binding energy of nuclei is always a positive number, since all nuclei require net energy to separate them into individual protons and neutrons.

I hope you find this helpful.

A film of oil lies on wet pavement. The refractive index of the oil exceeds that of the water. The film has the minimum nonzero thickness such that it appears dark due to destructive interference when viewed in visible light with wavelength 678 nm in vacuum. Assuming that the visible spectrum extends from 380 to 750 nm, what is the longest visible wavelength (in vacuum) for which the film will appear bright due to constructive interference

Answers

Answer:

Explanation:

For destructive interference , the condition is

2μt = nλ

2μt = n x 678

For constructive interference , the condition is

2μt = (2n+1)λ₁ /2

n x 678 = (2n+1)λ₁ /2

λ₁ = 1356 n / ( 2n + 1 )

λ₁ = 1356  / ( 2 + 1/n )

For longest wavelength , denominator should be smallest or n should be largest . The longest value of n is infinity so

λ₁ = 1356  /  2

= 678 nm .

Suppose a 118kg watermelon is held 5m above the ground before sliding along a frictionless ramp to the ground. How high above the ground is the watermelon at the moment it's kinetic energy is 4,610J

Answers

This question involves the concepts of kinetic energy, potential energy, and the law of conservation of energy.

The watermelon is "1.02 m" above the ground.

The total energy of the watermelon can be found by its potential energy at the highest point:

Total Energy = mgh

where,

m = mass = 118 kgg = 9.81 m/s²h = height = 5 m

Therefore,

Total Energy = (118 kg)(9.81 m/s²)(5 m)

Total Energy = 5787.9 J

LAW OF CONSERVATION OF ENERGY

Now, according to the law of conservation of energy, at the given point:

Total Energy = Kinetic Energy + Potential Energy

5787.9 J = 4610 J + mgh'

[tex]h'=\frac{5787.9\ J-4610\ J}{(118\ kg)(9.81\ m/s^2)}[/tex]

h' = 1.02 m

Learn more about the law of conservation of energy here:

https://brainly.com/question/2264339

In a Young's double-slit experiment the separation distance y between the second-order bright fringe and the central bright fringe on a flat screen is 0.0176 m, when the light has a wavelength of 425 nm. Assume that the angles are small enough so that is approximately equal to . Find the separation y when the light has a wavelength of 614 nm.

Answers

Answer:

Y = 0.0254 m = 25.4 mm

Explanation:

The formula for the fringe spacing in Young's Double-slit experiment is given by the following formula:

[tex]Y = \frac{\lambda L}{d}[/tex]

where,

Y = fringe spacing = 0.0176 m

λ = wavelength = 425 nm = 4.25 x 10⁻⁷ m

L = Distance between screen and slits

d = slit separation

Therefore,

[tex]\frac{0.0176\ m}{4.25\ x\ 10^{-7}\ m} = \frac{L}{d}\\\\\frac{L}{d} = 41411.76[/tex]

Now, for:

λ = 614 nm = 6.14 x 10⁻⁷ m

[tex]Y = (6.14\ x\ 10^{-7}\ m)(41411.76)\\[/tex]

Y = 0.0254 m = 25.4 mm

A box proceeds along the x-axis and the figure below shows a record of its velocity as a function of time. Every grid line along the vertical axis corresponds to 2.00 m/s and each gridline along the horizontal axis corresponds to 0.500 s. (Enter your answer in m/s^2. Indicate the direction with signs of your answers. Note that t=0 at the intersection of the axes.) a) Determine the average acceleration of the box in the time interval t=0 to t=2.50 s. b) Determine the average acceleration of the box in the time interval t=2.50 s to t=7.50 s. c) Determine the average acceleration of the box in the time interval t=0 to t=10.0 s

Answers

Answer:

The answer is "[tex]\bold{0, 12.8 \ \frac{m}{s^2}, and \ 6.4 \ \frac{m}{s^2}}[/tex]"

Explanation:

For point a:

The average time interval acceleration for the box [tex]t = 0\ to\ t = 250 \ s:[/tex]

[tex]\to \alpha_{0 \ to \ 2.50}=\frac{v_f - v_i}{t_f-t_i}=\frac{0-0}{2.50-0}=0[/tex]

For point b:

The average time interval acceleration for the box

[tex]t = 250 \ s\ to\ t = 750 \ s :[/tex]  

[tex]\to \alpha_{2.50 \ to \ 7.50}=\frac{v_f - v_i}{t_f-t_i}=\frac{32-(-32)}{7.50-2.50}=12.8 \ \frac{m}{s^2}[/tex]

For point c:

The average time interval acceleration for the box [tex]t = 0\ to \ t = 10 \ s :[/tex]  

[tex]\to \alpha_{2.50 \ to \ 7.50}=\frac{v_f - v_i}{t_f-t_i}=\frac{32-(-32)}{10-0}=6.4 \ \frac{m}{s^2}[/tex]

Suppose that you make a series RC circuit with a capacitor and a known resistor that has a 5% tolerance: R= 5.20 ± 0.26kΩ. You plan is to measure the time constant of the circuit in order to determine the value of the capacitor. You do ten trials of your experiment and measure the time constant each time, and then you calculate the average and standard error of the ten results to determine that τ= 2.150 ± 0.002s.

Which of the following is the best estimate of the uncertainty on your determination of the value of your capacitor?
a. 1%
b. 0.1%
c. 5%

Answers

Answer:

correct answer is C

Explanation:

The time constant of an RC circuit is

           τ = RC

so to find the capacitance

          C = τ/ R

          C = 2.150 / 5.20 10³

          C = 4.13 10⁻⁴ F

to find the error we use the worst case

         ΔC = | [tex]|\frac{dC}{d \tau }| \ \Delta \tau + | \frac{dC}{dR} | \ \Delta R[/tex]

the absolute value guarantees that we find the worst case, we evaluate the derivatives

          ΔC = 1 /R Δτ + τ/R²  ΔR

the absolute values ​​of the errors are

          Δτ = 0.002 s

          ΔR = 0.3 kΩ

we substitute

           ΔC = 0.002 /5.20 10³ + 2.150/(5.20 10³)²   0.3 10³

           ΔC = 3.8 10⁻⁷ + 1.74 10⁻⁵

           ΔC = 1.77 10⁻⁵ F

the uncertainty or error must be expressed with a significant figure

            ΔC = 2 10⁻⁵ F

the percentage error is

            Er% =[tex]\frac{\Delta C}{C} \ 100[/tex]

            Er% = [tex]\frac{2 \ 10^{-5} }{ 4.13 \ 10^{-4} } \ 100[/tex]

            Er% = 4.8%

the correct answer is C

4. When Tina went for a walk, she covered the first 300 m in 100 s and the next 200 m in 150
s. What was Tina's average speed?
A 1 m/s
B 2 m/s
C 3 m/s
D 5 m/s

Answers

2m/s

300m+200m=500m

100s+150s=250s

500m/250s= 2m/s

The average speed of tina will be 2m/s.

We have Tina who went for a walk.

We have to determine her average speed.

What is Average Speed ?

Average speed is the rate of change of displacement with respect to time.

v(avg) = Δx/Δt

According to the question -

Total Distance covered = d = 500 m

Total time taken = t = 250 s

Average speed = 500/250 = 2 m/s

Hence, the average speed of tina will be 2m/s.

To solve more questions on Average speed, visit the link below-

https://brainly.com/question/22982282

#SPJ2

g 2. In a laboratory experiment on standing waves a string 3.0 ft long is attached to the prong of an electrically driven tuning fork which vibrates perpendicular to the length of the string at a frequency of 60 Hz. The weight (not mass) of the string is 0.096 lb. a) [5 pts] What tension must the string be under (weights are attached to the other end) if it is to vibrate in four loops

Answers

Answer:

The tension in string will be "3.62 N".

Explanation:

The given values are:

Length of string:

l = 3 ft

or,

 = 0.9144 m

frequency,

f = 60 Hz

Weight,

= 0.096 lb

or,

= 0.0435 kgm/s²

Now,

The mass will be:

= [tex]\frac{0.0435}{9.8}[/tex]

= [tex]0.0044 \ kg[/tex]

As we know,

⇒  [tex]\lambda=\frac{2L}{n}[/tex]

On substituting the values, we get

⇒     [tex]=\frac{2\times 0.9144}{4}[/tex]

⇒     [tex]=0.4572 \ m[/tex]

or,

⇒  [tex]v=f \lambda[/tex]

⇒      [tex]=0.4572\times 60[/tex]

⇒      [tex]=27.432 \ m/s[/tex]

Now,

⇒  [tex]v=\sqrt{\frac{T}{\mu} }[/tex]

or,

⇒  [tex]T=\frac{m}{l}\times v^2[/tex]

On putting the above given values, we get

⇒      [tex]=\frac{0.0044}{0.9144}\times (27.432)^2[/tex]

⇒      [tex]=\frac{752.51\times 0.0044}{0.9144}[/tex]

⇒      [tex]=3.62 \ N[/tex]

Please please help me please please help please please help me please

Answers

Answer:

Electromagnetic waves do not require any medium to travel whereas mechanical waves must have a medium to propagate.

So, Basically, it is B I believe.

Hope It Helps!

A ball is kicked at 10.4 m/s at an angle of 32 degrees to the horizontal

how long (time) is the ball in the air?

find the horizontal displacement (range) of the ball

Answers

Answer:

3M/S

Explanation:

Science questions!! Please help!!
Post Assessment on Investigating the Immune System
please help!! Please choose the right answers!! Dont guess if you dont know the answers!!

Answers

9: A
10: A
11: D
12: A
13: D
14: B
15: A.

Can you please mark me brainliest THANKS
hope this helped

Match these items.
1. effect observed when light from an object in cool air passes through warm air
2. line perpendicular to a surface
3. splitting of light into its component colors angle of incidence
4. alignment of light into a single vibrational direction
5. larger angle as light passes from air to water
6. cause of the sky's color
7. bouncing of light rays reflection
8. bending of light between media
9. ratio of speeds of light
10. inability of light to escape a low-velocity medium due to a large angle of approach refraction
a. scattering
b.dispersion
c.angle of incidence
d.index of refraction
e.mirage
f.reflection
g.normal
h.total inertial reflection
i.polarization
j.refraction​

Answers

Answer:

1. effect observed when light from an object in cool air passes through warm air

→ h. total internal reflection

2. line perpendicular to a surface

→ g. normal.

3. splitting of light into its component colors angle of incidence

→ b. dispersion.

4. alignment of light into a single vibrational direction

→ i. polarization

5. larger angle as light passes from air to water

→ c. angle of incidence

6. cause of the sky's color

→ f. reflection

7. bouncing of light rays reflection

→ f. reflection

8. bending of light between media

→ j. refraction.

9. ratio of speeds of light

→ d. index of refraction.

10. inability of light to escape a low-velocity medium due to a large angle of approach refraction

→ scattering.

The ratio of carbon-14 to nitrogen-14 in an artifact is 1:7. Given that the half-
life of carbon-14 is 5730 years, how old is the artifact?

Definitely will be giving brainliest!! Thanks!!

Answers

Answer:

17,190 years old

Explanation:

A p e x

Other Questions
During a football game player A (mass 120kg velocity 5.5m/s [L]) tackles and grabs player B (mass 105kg velocity 7.9m/s [R]). What is the final speed of the two players immediately after the collision? Similar figures have the same ________ but not necessarily the same size. The radius of a circle is 3 feet. What is the circumference?Circumference = 2 * pie * radiusGeometry #37. What is the next step when solving the equation sin (2x) - sin (x) = 0 In your response, be sure to address all parts of the question. Use complete sentences; an outline or bulleted list alone is not acceptable. Answer all parts of the question that follows. a) Identify ONE ideology used to justify imperialism in the period from 1800 to 1900. b) Explain ONE way in which a specific European state applied a specific ideology to govern its colonies. c) Identify ONE specific pattern in the way in which colonized societies responded to imperialism. Jimmy spent $32.50 at the bowling alley. He spent $5 to rent shoes and the rest he spent on bowling l, which cost $5.50 per game. What are the 2 steps and how much games did jimmy bowl? Which of these is an example of a capital resource?A. workersB. iron oreC. entrepreneursD. computers What is the greatest common factor (GCF) of 24 and 40? Will give brainliest if correct! Which of the following is not a solution to the inequality 3(72x)>8?A) -3B) -1C) 0D) 1 George F. Kennan, an American Diplomat at the US embassy in Moscow, sent his summary of Soviet policies to the State Department in a very long telegram. The information in that telegram was eventually published anonymously as The Sources of Soviet Conduct in Foreign Affairs in 1947. His analysis of the Soviets and their desire to expand their physical and political control preceded President Trumans formulation of the Truman Doctrine.Write a self-checked essay on how you think Kennan may have influenced the Truman Doctrine.Use the Internet to find sources to back up your ideas in the essay. The following links will take you to the text of whatKennan had to say and the Truman Doctrine. Analyze the zeros of f(x)=^4-3x^3-2x^2+3x-5Determine the zeros to the nearest tenth.a.1.4, -3.4c.1.2, 3.4b.2.4, 2.3d.1.4, 3.4 . Create a six-sentence paragraph/dialogue using all the tensesyou've learned this year.It must make sense (grammatically-speaking) AND be acceptablefor school. You will post the script in the "submission activity"/commentssection. (You know, where I usually post my audio comments).. You will record yourself reciting the script on video. Make surethat you are visible and that you aren't wearing a mask. You can only use a subject a maximum of two times. Forexample, once you've used "yo" twice, that's it.The sentences MUST go in this order:1.1. Imperfect2. Past (you may combine the imperfect/past tenses intoone sentence, just don't put the verbs right next to eachother. If you do this, then you'll have 5 sentences. Duh.)3. Present4. Past Progressive5. Present Progressive6. Future PLEASE HELPPPPP!!!!!!!!! (show work if you can) The third-floor residents of a building were polled about whom they would vote for in the upcoming city election for comptroller. What are the sample and the population in this poll? What is represented by the dashed blue line and the solid black line in the image below? motion,vectors,scalars,distance,displacement I need help, I don't understand. A frozen yogurt shop has several flavors. Sherri use different freezer temperatures to get the ideal softness for each flavor which of the freezer temperatures can sherri use for cherry yogurt. Should President Theodore Roosevelt have been selected as one of the presidents memorialized on Mount Rushmore? Question 1817Choose whether the following sentence would be written inthe preterite or imperfect tense.Those girls were talking loudly before class.PreteriteImperfect I'm writing a essay/portfolio on critiquing my essays throughout the year. How would I write an introductory paragraph? Or have a hook to grab the audiences attention? I have to talk about how I improved in or didn't improve in critical thinking, communication skills, personal responsibility, and quantitative skills in my writing