Answer:
An exothermic reaction is happening, it is absorbing the cold.
Key Concepts
Identify the choice that best completes the statement or answers the question.
13. Basalt is a gray or black igneous rock. Pilar uses an absolute dating method to study a sample of basalt. What will the method help her learn about the basalt sample?
F the age of the sample
G the composition of the sample
H the physical structure of the sample
I the geographic distribution of the sample
Answer:
Explanation:
Answer
It tells you what method she used and what she wanted to accomplish. She is using
an absolute dating method to study a sample of basalt
So the answer you should post is F. F and the quotation above say the same thing.
Which of the following is true of folded mountains, fault-block mountains, and volcanic mountains?
Form from the buildup of lava and ash
Form only at boundaries between two oceanic plates
Form only at boundaries between two continental plates
Form at both convergent and divergent plate boundaries
Answer:
Here are the following answers to the five questions:
(1) "Form only at boundaries between two continental plates."
(2) "A fault-block mountain"
(3) "Island arcs form when hot, fluid rock rises through thin spots in Earth's crust, whereas hotspot volcanoes form when two oceanic plate boundaries push against each other until subduction happens and the plates partially melt."
(4) "The fault plane runs from the top of the rock to the bottom of the rock at an angle greater than 45 degrees."
(5) "Segments of Earth's crust bent and doubled over, and moving wind and water gradually shaped the rock into gently sloping domes."
Explanation:
If you have 10,000 grams of a substance that decays with a half-life of 14 days, then how much will you have after 28 days?
Round to the nearest whole number.
Answer:
2500g
Explanation:
Half-life like the name suggests cuts the amount by half. So 10,000 grams would be 5,000 grams in one half-life (14 days). But 28 days is two halflives (14 + 14 = 28), thus 5,000 would be cut in half again to finally be 2500 g.
Water’s property of surface tension is due to _____.
A. capillary action
B. solubility
C. cohesion
D. adhesion
E. All of the above
Answer:
C. cohesion
Explanation:
The cohesive force between liquid molecules are responsible for the phenomenon known as surface tension
4. Who has the most sensitive taste buds?
adults
babies
teenagers
the elderly
Answer:
Taste bufs
Explanation:
May be teenager or adult is the most probable answer because teenager and adult are fully developed species of human so they can have most sensitive taste bud
PLEASE MARK ME BRAINLIEST IF MY ANSWER IS CORRECT
nuclear reactions take place where?
a) ring of electrons, b) the entire atom, c) nucleus, d) none of these
Which reactant controls the amount of product formed?.
Answer:
limiting reactant gives ................
Answer:
Limiting Reagent or Limiting Reactant
Explanation:
The limiting reagent of a reaction is the reactant that runs out first. Once it is completely consumed, the reaction stops.The limiting reagent is the only chemical that is used to calculate the theoretical yield. It is used up first. After that, any excess reagent will not be able to produce more products.And to assess which reactant is which, we must usually have quantities of each reagent in a chemical reaction...and of course we should write a stoichiometric equation that is balanced with respect to mass and charge in order to assess the stoichiometric equivalence.
We could examine for instance, the combustion of methane gas, the which MAY have cooked your dinner … its combustion reaction is as shown...
[tex]CH_4(g) + 2O_2(g) rarr CO_2(g) + 2H_2O(g) + Delta[/tex]
And here conditions of COMPLETE combustion pertain; there is DIOXYGEN in excess, AND methane is the limiting reagent. A [tex]10*g[/tex] mass of methane represents a molar quantity of …
[tex](10.0*g)/(16.01*g*mol^-1)=0.623*mol[/tex]
And with respect to dioxygen we thus require...
[tex]0.623*mol*32.00*g*mol^-1=40*g[/tex]
...but this quantity (AND MORE) is available from the atmosphere....and the methane was the limiting reagent....
3. Which half-reaction equation represents reduction?
Answer:
Which half-reaction equation represents reduction?
answer is 2
Answer:
B CU2+ +2e- -> Cu
Explanation:
reduction means something opposite of the word
reduction means an electron is GAINED in the part before the arrow
it's the " + 2e- " part of the equation before the arrow or "->" part
oxidation is the LOSING of an electron so it would show up to the right of arrow or "->" of the equation as "+2e-"
both reduction & oxidation reactions are called "redox"
in a battery
anode is oxidation
cathode is reduction
anode is positive
cathode is negative electrode
decomposing compounds is electrolysis.
https://brainly.com/question/16118863
https://brainly.com/question/15313673
I need help I will give crown
Answer:
This is a scientific model.
Explanation:
A scientific model is a representation of systems of ideas, events or processes.
This drawing offers explanations that enables the water cycle to be predicted.
How many grams of BaCl2 are required to make 1.50L of a 0.60M solution?
Answer:
187.407g
Explanation:
Moles of solute = Molarity × Liters of solution
Multiply 0.60 M by 1.50L:
0.60 mol/ 1L×1.50L=0.9 mol
To obtain the mass of solute, we will need to the molar mass of BaCl2, which is 208.23g/mol:
Finally, multiply the number of moles by208.23g /mol
0.9mol×208.23g/1mol =187.407g
Boom, you have a mass of:
187.407g
What information does the percent composition of an atom in a molecule give?
A. The total number of atoms of that element in a molecule
B. The total mass that element contributes to a molecule
C. The relative amount of mass an atom contributes to a molecule
D. The relative number of atoms one element contributes to a molecule
Answer:
C
Explanation:
The percent composition of an atom in a molecule gives information regarding the relative amount of mass an atom contributes to a molecule.
What happens during stage 3 of cold water immersion.
Answer:
Stage 3 or long-term immersion hypothermia happens after 30 minutes or more. Cold water pulls heat from the body, and the body’s core temperature drops. This eventually leads to loss of consciousness and death.
how many moles of O2 are needed to produce 3.95 moles of Fe2O3
Answer:
4Fe+3O2- 2Fe2O3
the ratio: 3:2
x:3.95
x=5.92 moles of O2
Which shows an isomer of the molecule below?
The isomer of the molecule in the depicted image would be A.
What are isomers?Isomers are molecules with the same chemical formula but different arrangements of their component atoms. Isomers also have different properties.
The original molecule in the image has a triple bond with 4 carbon atoms. Thus, its isomers must also have a triple bond with 4 carbon atoms.
The only option with a triple bond and 4 carbon atoms in the image is option A.
More on isomers can be found here: https://brainly.com/question/13422357
#SPJ1
What pressure, in atm, is required to reduce 60.0 mL of a gas at standard conditions to
10.0 mL at a temperature of 25.0 °C?
Molly inflates a beach ball to a volume of 8 liters in her air-conditioned house where
the temperature is 19°C. Later that day, Molly takes the beach ball to the beach. The
temperature at the beach was 33°C, and the air pressure at the beach is the same as
it was at the house.
What will happen to Molly's beach ball when she is at the beach?
The temperature at the air-conditioned house is 19° C. The temperature increases to 33° C in the beach. Molly's beach ball's volume will increase with increase in temperature.
What is the Charles law?Charles' law states that volume of gas increase with an increase in the temperature of the gas.
When pressure remain constant, if temperature increases, the volume of the ball will also increase.
Thus, Molly's beach ball's volume will increase with increase in temperature.
Learn more about Charles law
https://brainly.com/question/16927784
#SPJ1
When auger is dissolved in heated water ___ is the solvent and ___ is the solute? A heat, water b water, heat c water, sugar d sugar, water
Answer C
Explanation: the solute will be sugar and the solvent will be water :)
Which of the following statements is true? Select one: a. A solution is a pure substance. b. A solution is a mixture. c. The solvent is dissolved in the solute. d. A solution has the same properties as a colloid.
Answer:
B
Explanation:
Why would solar power be the best energy option for our new high school?
Explain why!
Answer:
Energy costs are high for many school districts. Therefore, unlimited free power generated by the sun can deliver huge cost savings when compared to grid-generated power. With a modestly sized solar array, cost savings are alike modest.
Explanation:
please explain this question
this is urgent thank u
Answer:
the answer is C which says 1 and 2
I NEED HELP ASAP!!!!!!!!!!!
WITHIN THE HOUR
Thanks
Answer:
C
Explanation:
Actually, arranged to the size of smallest to least atom radius size = C
Atomic sizes generally get smaller as you go from L to R across a row of the periodic table.
How many grams of C8H18
is in 405,576.398 mL
[tex]Molarity X \frac{0.762 mol}{05.576398 L} = Mass[/tex] is the of [tex]C_8H_1_8[/tex] is in 405,576.398 mL.
What is molarity?Molarity (M) is the amount of a substance in a certain volume of solution. Molarity is defined as the moles of a solute per litres of a solution. Molarity is also known as the molar concentration of a solution.
Given data:
Molar mass of [tex]C_8H_1_8[/tex] = 0.762 mol
Volume of solution = 405,576.398 mL = 405,576.398 mL/1000 = 405.576398 L
Solution:
Step 1: Calculating moles of [tex]C_8H_1_8[/tex]
• Molarity =[tex]\frac{\;Moles \;of \;solute}{\;Volume \;of \;solution \;in \;litre}[/tex]
• Putting the value in the given formula
• Moles of solute C8H18 = [tex]\frac{\;Mass}{\;Molar \;molar \;mass}[/tex]
• Moles of solute C8H18 = [tex]\frac{\;Mass}{0.762 mol}[/tex]
Now,
Molarity =[tex]\frac{\;Moles \;of \;solute}{\;Volume \;of \;solution \;in \;litre}[/tex]
Molarity =[tex]\frac{\frac{\;Mass}{0.762 mol}}{\;Volume \;of \;solution \;in \;litre}[/tex]
Molarity =[tex]\frac{\frac{\;Mass}{0.762 mol}}{405.576398 L}[/tex]
[tex]Molarity X \frac{0.762 mol}{05.576398 L} = Mass[/tex]
Hence, [tex]Molarity X \frac{0.762 mol}{05.576398 L} = Mass[/tex] is the of [tex]C_8H_1_8[/tex] is in 405,576.398 mL.
Learn more about molarity here:
https://brainly.com/question/2817451
#SPJ1
Give the correct name for the structure in the image.
Answer:
2,5,6-trimethyloctane
Explanation:
1) Count the number of carbons in the longest chain. If the structure contains a functional group (e.g. double bond, -OH), they have to be part of the chain that you're counting.
• The straight chain is the longest chain, and it contains 8 carbons
• Without the additional 3 methyl (-CH₃) substituents, it would be called octane (since it is an alkane)
2) Assign location numbers for the substituents, ensuring that they are the lowest possible numbers
• From left to right, we could name it as 2,5,6-trimethyloctane
• From right to left of the parent chain, it would be called 3,4,7-trimethyloctane
• Assigning from left to right gives us the lowest location numbers as the sum of the numbers is 13 instead of 14
• Remember to add 'tri' since we have 3 methyl groups
Which equation shows a physical change?
A-Pb(NO3)2 (aq) + 2KI(aq) → 2KNO3(aq) + PbI2(s)
B-2H2O(l) → 2H2(g) + O2(g)
C-H2O(g) → H2O(s)
D-HCl(aq) + NaOH(aq) → NaCl(aq) + H2O(l)
Answer:
C
water has undergone a phase change and the composition of a substance was not changed
30cm3 of NaOH is neutralised by 12.3cm3 of 0.2mol/l HCI. What is the concentration of the NaOH. 0.82 mol/l 0.082 mol/l 82 mol/l 0.49 mol/l
Lets see
C1V1=C2V230C1=0.2(12.3)30C1=2.46C1=2.46/30C1=0.082mol/LAnswer:
Step 1: Calculate the amount of sodium hydroxide in moles
Amount of solute in mol = concentration in mol/dm 3 × volume in dm 3Amount of sodium hydroxide = 0.100 × 0.0250.= 0.00250 mol.The balanced equation is: NaOH(aq) + HCl(aq) → NaCl(aq) + H 2O(l)So the mole ratio NaOH:HCl is 1:1.What is the expansion for the chemical symbol of tungsten?.
seriously what do i put in the x and y table im stuck and need to move to the next assignment
Remember the relationship
P is indirectly proportional to VSo
The pairs are
(2,4)(1,8)(4,2)(12,2/3)(2/3,12)And so on
Ethanol, an organic compound, has the following structural formula.
H
H
H-C-C-0-H
I
1
H H
What is the chemical formula for ethanol?
O CHO
O
C₂H5O
C₂H5O2
O C₂H6O
Answer:
hope this will help you
Explanation:
[tex]the \: structural \: formula \: is \: ch3 - ch2 - oh \\ \\ and \: chemical \: formula \: is \: c2h6o[/tex]
The chemical formula for ethanol is [tex]C_2H_5OH[/tex], where there are 2 carbon atoms, 6 hydrogen atoms, and 1 oxygen atom are there.
What is the chemical formula?A chemical formula tells us the number of atoms of each element in a compound.
The methyl group ([tex]CH_3-[/tex]) carbon attaches to the methylene group ([tex]CH_2-[/tex]) carbon, which binds to the oxygen of the hydroxyl group (-OH).
Hence, the chemical formula for ethanol is [tex]C_2H_5OH[/tex], where there are 2 carbon atoms, 6 hydrogen atoms, and 1 oxygen atom are there.
Learn more about chemical formula here:
https://brainly.com/question/20708241
#SPJ2
0.006kg ball is moving 5.0m/s How large is the kinetic energy from this motion?
Answer: times it by 5
Explanation:
What will most likely happen when stress is applied to an equilibrium reaction?
A) The system will not respond to the stress.
B) The system will use catalysts to change its equilibrium.
C) The equilibrium position will shift to increase the applied stress.
D) The system will change its concentration to shift to a new equilibrium position.
Answer:
option D is the correct answer of this question.
When stress is applied to an equilibrium reaction then the system will change its concentration to shift to a new equilibrium position.
So, the correct option is D.
What is equilibrium ?The stage at which the rate of formation of reaction is equal to rate of backward reaction in an reversible reaction is called equilibrium.
The reaction in such stage occur is called equilibrium reaction.
Factors affecting equilibrium reaction.There are some factors which affects the equilibrium.
Pressure : On increasing pressure of the gas present in reactant side shift the reaction to forward direction.Concentration : As concentration of the reactant increases then the reaction shifts in forward direction and as concentration of product is increases then the reaction moves in backward directionTemperatureNumber of moles.learn about equilibrium
https://brainly.com/question/13463225
#SPJ2