what will the killograms be of 981N and 160N

Answers

Answer 1

The mass of the objects in kilograms could be obtained as;  100 Kg and  16.3 Kg.

What is weight?

The term weight has to do with the effect of the gravitational force on an object hat is found on the surface of the earth. Note that the weight is a force an d the direction of the weight must always be towards the center of the earth.

Now we are asked to convert 981N and 160N to kilograms. Recall that the weight is the product of the mass of the object in kilograms to the acceleration due to gravity.

Mass = weight/acceleration due to gravity

1)  981N/9.8 m/s^2

= 100 Kg

2) 160N/9.8 m/s^2

= 16.3 Kg

Learn more about weight:https://brainly.com/question/10069252

#SPJ1


Related Questions

inner parts of the flattening cloud begin to fall freely inward, raining down on growing object at the center. gravitational potential energy of collapsing gas cloud is converted into heat and radiative energy.

Answers

These 2 statements are 2 steps of solar planet formation 1st statement is 3rd step 2nd statement is 4th step.

In the cosmos, there are a lot of planetary systems with solar planets around a host star, similar to our own. Because we refer to things that are connected to our star as "solar," our planetary system is sometimes known as "the solar system," after the Latin word for the Sun, "solis." The Sun, our star, and everything gravitationally connected to it, including the moons, planets, and dwarf planets like Pluto, Mercury, Venus, Earth, Mars, Jupiter, Saturn, Uranus, and Neptune, make up our solar system. Thousands of planetary systems orbiting other stars in the Milky Way have been found, in addition to our solar system. The Milky Way galaxy's outer spiral arm is where our solar system is situated. In our solar system, there is only the Sun.

Learn more about solar planet here:

https://brainly.com/question/19597012

#SPJ4

a conductor consists of an infinite number of adjacent wires, each infinitely long and carrying a current i (whose direction is out-ofthe-page), thus forming a conducting plane.

Answers

If there are n wires per unit length, magnitude of B measure at A or C is B = Ωo*n*I/2

A key concept in science is the concept of magnitude in physics. The general quantity or distance is referred to as magnitude. When it comes to the elements of movement, we can tie magnitude to an object's size and motion speed.

A particular object's magnitude is determined by its size or quantity. For instance, when it comes to speed, if a car is moving at a quicker rate than a nearby motorcycle, the magnitude of the automobile's speed is greater than the speed of the motorcycle. Although they contain directions as well as magnitude, vector quantities. Vector quantities include things like force, acceleration, speed, velocity, and many others. A vector's absolute value is referred to as its magnitude.

Learn more about magnitude here:

https://brainly.com/question/1313542

#SPJ4


For questions 7 through 9, Albert and friends are stranded in a clearing on top of a hill at an
elevation of 350m above sea level. You are on a rescue plane flying in supplies to tide them over
until help arrives. Your plane is flying at a constant speed of 260 km/h from west to east at an
elevation of 810m.

PLEASE HELP WOTH THESE QUESTIONS!!!!!!

Answers

Answer:

Assume that the air resistance on the supplies is negligible, and that [tex]g = 9.8 \; {\rm m\cdot s^{-2}}[/tex].

The plane need to drop the supplies when it is horizontally approximately [tex]700\; {\rm m}[/tex] away from the hill.

The supplies will hit the tree.

Explanation:

Let [tex]u_{y}[/tex] and [tex]v_{y}[/tex] denote the initial and final vertical velocity of the supply; [tex]u_{y} = 0\; {\rm m\cdot s^{-1}}[/tex] since the plane was flying horizontally.

Let [tex]x_{y}[/tex] denote the vertical displacement of the supply; [tex]x_{y} = 350\; {\rm m} - 810\; {\rm m} = (-460)\; {\rm m}[/tex].

Let [tex]a_{y}[/tex] denote the vertical acceleration of the supply; [tex]a = (-g) = (-9.8)\; {\rm m\cdot s^{-2}}[/tex].

Make use of the SUVAT equation [tex]{v_{y}}^{2} - {u_{y}}^{2} = 2\, a_{y}\, x_{y}[/tex] to find [tex]v_{y}[/tex], the final vertical velocity of the supply:

[tex]\begin{aligned} {v_{y}}^{2} &= {u_{y}}^{2} + 2\, a_{y}\, x_{y} \end{aligned}[/tex].

[tex]\begin{aligned} v_{y} &= -\sqrt{{u_{y}}^{2} + 2\, a_{y}\, x_{y}} \\ &= -\sqrt{0^{2} + 2\, (-9.8)\, (-460)}\; {\rm m\cdot s^{-1}} \\ &\approx (-94.953)\; {\rm m\cdot s^{-1}} \end{aligned}[/tex].

(Negative since the supply would be travelling downwards.)

Let [tex]t[/tex] denote time it takes for the supply to land on the hill after being dropped from the plane. Make use of the SUVAT equation [tex]t = (v_{y} - u_{y}) / (a)[/tex] to find the value of [tex]t\![/tex]:

[tex]\begin{aligned} t &= \frac{v_{y} - u_{y}}{a} \\ &\approx \frac{(-94.953) - 0}{(-9.8)} \; {\rm s}\\ &\approx 9.6890 \; {\rm s} \end{aligned}[/tex].

Apply unit conversion and ensure that [tex]v_{x}[/tex], the horizontal speed of the plane is in the standard unit [tex]{\rm m\cdot s^{-1}}[/tex]:

[tex]\begin{aligned} v_{x} &= \frac{260\; {\rm km}}{1\; {\rm h}} \times \frac{1\; {\rm h}}{3600\; {\rm s}} \times \frac{1000\; {\rm m}}{1\; {\rm km}} \\ &\approx 72.222\; {\rm m\cdot s^{-1}}\end{aligned}[/tex].

Under the assumptions, the horizontal speed of the supply will be the same as that of the plane- [tex]v_{x} \approx 72.222\; {\rm m\cdot s^{-1}}[/tex]- until it lands.

While in the air, the supply will travel a horizontal distance of:

[tex]\begin{aligned}x_{x} &= v_{x}\, t \\ &\approx 72.222\; {\rm m\cdot s^{-1}} \times 9.6890\; {\rm s} \\ &\approx 699.76\; {\rm m}\end{aligned}[/tex].

Hence, for the supply to land exactly at the top of the hill, the plane need to drop the supply while at a horizontal distance of approximately [tex]700\; {\rm m}[/tex] away from the hill.

The horizontal distance between the trees and the location where the plane dropped the supply would be approximately [tex](700\; {\rm m} - 30\; {\rm m}) = 670\; {\rm m}[/tex]. The time required for the the supply to reach that horizontal position would be:

[tex]\begin{aligned} t &= \frac{x_{x}}{v_{x}} \approx \frac{669.76\; {\rm m}}{72.222\; {\rm m\cdot s^{-1}}} \approx 9.2736\; {\rm s}\end{aligned}[/tex].

Let [tex]h_{0}[/tex] denote the initial height of the supply (relative to the sea level.) In this question, [tex]h_{0} = 810\; {\rm m}[/tex].

Let [tex]h(t)[/tex] denote the height of the supply (relative to the sea level) after being dropped from the plane for time [tex]t[/tex].

The SUVAT equation [tex]h(t) = (1/2)\, a\, t^{2} + u_{y}\, t + h_{0}[/tex] gives an expression for [tex]h(t)[/tex]. Make use of this equation to find the height of the supply (relative to the sea level) when the supply reach the horizontal position of the trees at [tex]t \approx 9.2736\; {\rm s}[/tex]:

[tex]\begin{aligned} h(t) &= \frac{1}{2}\, a\, t^{2} + u_{y}\, t + h_{0} \\ &= \frac{1}{2}\times (-9.8)\, (9.2736)^{2} + 0\times 9.2736 + 810 \\ &\approx 388.60\; {\rm m} \end{aligned}[/tex].

Note that the altitude of the top of the trees is [tex]350\; {\rm m} + 40\; {\rm m} = 390\; {\rm m}[/tex] relative to the sea level. Since [tex]388.90\; {\rm m} < 390\; {\rm m}[/tex], the supplies will run into the trees.

a change in state involves a change in the______of the particles​

Answers

Answer: Energy

Explanation: Any change in the states of matter is the result of added or lost energy. For example, when Water is frozen, it loses all of its particle energy, which is why when it's ice, all the particles stick together, but if you boiled the water to make vapor, they fly around like crazy because they have a lot of energy.

as the pressure of an enclosed gas decreases to half its original value, what happens to the volume of the gas if temperature is held constant?(1 point)

Answers

Answer:

See below

Explanation:

P1V1/T1 = P2V2/T2      IF  T1 = T2

Then

P1V1 = P2V2       P2 = 1/2 P1

P1V1 = 1/2 P1 V2        DIVIDE BOTH SIDES BY P1

V1 = 1/2 V2        MULTIPLY BOTH SIDES BY 2

2V1 = V2           OR     V2 = 2 V1     THE NEW VOLUME IS TWICE ORIGINAL

according to a simplified model of a mammalian heart, at each pulse approximately 20 g of blood is accelerated from 0.25 m/s to 0.35 m/s during a period of 0.10 s. what is the magnitude of the force exerted by the heart muscle?

Answers

The magnitude of the force exerted by the heart muscle is 0.02N

since

F = m dv/dt

  = 0.02(0.35-0.25)/0.10

F =0.02N.

A force is an influence in physics that can change the motion of an object. A force can cause a mass object to change its velocity, or accelerate. Intuitively, force can be described as a push or a pull. A force is a vector quantity because it has both magnitude and direction.

To learn more about magnitude see the link  

https://brainly.com/question/15681399

#SPJ4

An object moves 60.0 m on a bearing (angle from North) of 60.0°. If the object then moves 30.0 m North, how far is it from the start point? You may use a scale diagram or trigonometry to answer this question.​

Answers

Answer: x(t2)−x(t1) over the time interval [t1,t2]

Explanation: hope this helps

Five ramps lead from the ground to the second floor of a workshop, as sketched below. All five ramps have the same height; ramps B, C, D and E have the same length; ramp A is longer than the other four. You need to push a heavy cart up to the second floor and you may choose any one of the five ramps. Assuming no frictional forces on the cart, which ramp would require you to do the least work?

1. Same work for ramps B, C, D or E; more work for ramp A.

2. Same work for the straight ramps A and B; less work for ramps C, D, and E.

3. Ramp D.

4. Ramp E.

5. Ramp B.

6. Ramp A.

7. Ramp C.

8. Same work for all five ramps.

9. Unable to determine without knowing the exact profiles of ramps C, D or E.

Answers

By assuming no frictional forces on the cart,  Same work for all five ramps would require you to do the least work.

What exactly is a frictional force?

The force produced by two surfaces coming into contact and sliding against one another is referred to as frictional force. The following variables impact the frictional force, Surface roughness and the amount of force pressing them together have the biggest an impact on these forces.

What is work-energy theory and how is it supported?

According to the work energy theorem, the net change in a body's energy is equal to the work that is done on it. K.E. or P.E. Proof: Consider a mass'm' object travelling at a 'u' starting velocity. Allow a body to vary its velocity to v in response to a constant force, F.

Let h be the height of the ramps. Since there is no friction, we can use the

work-energy theorem.

Wtot = Wperson + Wgravity = ∆K

Hence for all the ramps,

Wperson = −Wgravity + ∆K = mgh + ∆K

In particular, if ∆K = 0 (the cart starts from rest and ends at rest),

Wperson = mgh, for all the ramps.

So, the Same work for all five ramps.

To know more about work-energy theorem here-

https://brainly.com/question/15598542

#SPJ13

A mass on the end of a spring undergoes simple harmonic motion. At the instant when the mass is at its equilibrium position, what is its instantaneous acceleration?.

Answers

A mass on the end of a spring undergoes simple harmonic motion. At the instant when the mass is at its equilibrium position, its instantaneous acceleration is zero

When the restoring force is proportionate to the displacement but acting in the opposite direction, an oscillating mass moves in a manner known as harmonic motion. The sine wave has a constant frequency and amplitude and can be used to describe harmonic motion because it is periodic. The motion of a weight on a spring is an illustration of this.

Simple Harmonic Motion, also known as SHM, is a motion in which the restoring force is inversely correlated with the body's deviation from its mean position. A particle moving in simple harmonic motion experiences acceleration given by the formula a(t) = − 2 x (t). The particle's angular velocity is given in this equation as.

learn more about harmonic motion here :

https://brainly.com/question/17315536

#SPJ4

Jack and Jill carry a bag of bricks to the top of the hill to mend the well. If the bricks weigh 50 N and the hill is
30 m, how much work do they do between them?

Answers

Answer:

1500 J

Explanation:

Work = force * distance   =  50 N * 30 M = 1500 J

A car travels south at 30 m/s for 5 minutes. How many seconds does it travel
for?
A. 350 s
B. 250 s
C. 200 s
D. 300 s

Answers

Answer:

The Answer is D. 300 s because in 5 minutes there are 300 seconds

3. Hakeem was participating in a psychology experiment. For the first ten minutes Hakeem would hear a click then a puff of air would blow in Hakeem's eye. His eyes would blink and tear up. For the second ten minutes Hakeem would hear a click but the puff of air would only blow in his eye every third time. Hakeem knows this but his eyes would blink and tear up after every click.



UCS: UCR:

CS: CR:

NS:

Answers

In the psychology experiment in which Hakeem participates, UCS is click, UCR is blink and tear up, CS is blowing a puff of air, CR is thought of the puff of air and NS is the click before puff of air was introduced.

In psychology the abbreviations of the given terms are as follows:

UCS - Unconditioned Stimulus UCR - Unconditioned ResponseCS - Conditioned Stimulus CR - Conditioned ResponseNS - Neutral Stimulus

Here the Unconditioned Response is the blinking and tearing up because he does that even though there is no puff of air. Since clicking provokes the Unconditioned Response, clicking is the Unconditioned Stimulus. The clicking is paired with puff of air for multiple times, that is why Unconditioned Response is stimulated. So the puff of air is the Conditioned Stimulus.

Therefore,

UCS - Clicking UCR - Blinking and tearing upCS - Blowing of puff of air in the eyeCR - Thought of puff of air being blown into the eye NS - Clicking before any puff of air was blown

To know more about stimulus and response

https://brainly.com/question/28944674

#SPJ1

A force of -4.4 x 103 N exists between a positive charge of 8.0 x 10-4 C and a negative charge of -3.0 x 10-4 C. What is the distance that separates the charges?

Answers

The distance that separates the charges is 0.7 m.

What is the distance between the charges?

The distance between the charges is determined by applying Coulomb's law of electrostatic force as shown below.

F = kq₁q₂/r²

where;

r is the distance between the chargesk is coulomb's constantF is the force between the charges

r² = kq₁q₂/F

r² = (9 x 10⁹ x 8 x 10⁻⁴ x 3 x 10⁻⁴) / (4.4 x 10³)

r² = 0.49

r = √0.49

r = 0.7 m

Thus, the distance that separates the charges is 0.7 m.

Learn more about electric force here: https://brainly.com/question/17692887

#SPJ1

Exercise write the peice wise

function {h(x) x
r(x) a<=x
K(x) x>=b} in terms

Of one function

Answers

A piecewise-defined function in mathematics is one that is composed of several smaller functions, each of which has a certain interval of the domain it applies to. Instead of being a property of the function itself, piecewise definition is a means to express the function.

In terms of r(x),

r(x) <= x when x >= b

A function that is defined by many sub-functions, each of which applies to a specific interval of the main function's domain, is referred to as a piecewise-defined function in mathematics (also known as a piecewise function or a hybrid function) (a sub-domain).

When an input value passes specific "boundaries," a rule or relationship changes. In these cases, we employ piecewise functions to explain the situation.

For instance, it happens frequently in business that the price per piece of a particular item gets decreased after the quantity bought exceeds a certain threshold.

To know more about piece wise function, click on the link below:

https://brainly.com/question/27262465

#SPJ9

What is the distance from the moon to the sun?

Answers

Answer:

About 150 million kilometers

Explanation:

have good day♡

Around 1500 kilometers or 2 suns away could also say 932.057 miles away

describe how two objects can have the same speed but different velocities

Answers

Two objects can have the same speed but different velocities. The detailed description is given below.

We can take two escalators to explain the concept. The two escalators are moving up at a speed of 10 m/s. In this case, the two escalators have the same speed and they are moving in the same direction. So, they have the same velocity also.

Now one escalator is moving up at a speed of 10 m/s and the other escalator moving down at a speed of 10 m/s. In this case, both escalators move at 10 m/s, so their speed is the same. But they are not moving in the same direction. Hence their velocity is not the same. One has 10 m/s downwards and the other one has 10 m/s upwards velocity.

To know more about velocity here:

https://brainly.com/question/28738284

#SPJ1

1. on the planet arrakis a male ornithoid is flying toward his mate at 25.0 m/s while singing at a frequency of 1200 hz. if the stationary female hears a tone of 1240 hz, what is the speed of sound in the atmosphere of arrakis?

Answers

If the stationary female hears a tone of 1240 hertz, then the speed of the sound in the atmosphere of arrakis will be 775 meter per second.

The term "Ducler shift" refers to the apparent change in frequency caused by the source moving closer to the observer or by the relative motion between the source and the object. The formula: true frequency over 1 minus v s over v gives the observed frequency. Let's call this equation 1, shall we? The real frequency in our case is stated as 1200 hertz, but the perceived frequency is reported as 1240 hertz. It is stated that the source's velocity, vs, is 25.0 meters per second. Rearranging equation 1 yields the result that the real frequency over the absorbed is equal to 1 minus b s over v.

As a result, we can be represented as v s over 1 minus f, actual over f absorbed now 1 substituting the values we get 25.0 meter per and over 1 minus 1200 hertz over 1240 hertz. Frequency fur, the rearranging we get 1 minus f real over f absorbed, is equal to v s over v. The sound travels at a speed of 775 meters per second after further calculation.

To know more about hertz click on the link:

https://brainly.com/question/19614632

#SPJ4

A wire of a certain length (α = 0.0065 1/°C) has a resistance of 15 Ω at 20°C.
Calculate the temperature at which the resistance will be 22.8 Ω

Answers

The temperature at which the resistance will be 22.8 Ω is 100 °C

How to determine the temperature

The following data were obtained from the question:

Coefficient of epansion (α) = 0.0065 °C¯¹ Original resistance (R₁) = 15 Ω Original temperature (T₁) = 20 °C New resistance (R₂) = 22.8 ΩNew temperature (T₂) =?

The new temperature can be obtained as illustrated below:

α = R₂ – R₁ / R₁(T₂ – T₁)

0.0065 = 22.8 – 15 / 15(T₂ – 20)

0.0065 = 7.8 / 15(T₂ – 20)

Cross multiply

0.0065 × 15 (T₂ – 20) = 7.8

0.0975 (T₂ – 20) = 7.8

Divide both side by 0.0975

T₂ – 20 = 7.8 / 0.0975

T₂ – 20 = 80

Collect like terms

T₂ = 80 + 20

T₂ = 100 °C

Thus, the temperature is 100 °C

Learn more about linear expansion:

https://brainly.com/question/14831048

#SPJ1

A horse pulls a cart with force F. As a result of this force the cart accelerates with constant acceleration. The
magnitude of the force that the cart exerts on the horse
A) is zero newtons. B) greater than the magnitude of F. C) equal to the magnitude of F. D).
less than the magnitude of F.

Answers

Answer:

c. equal equal to the magnitude of f

two cars are diriving down the road. car a has a mass of 1,100 kg and is moving at 20 m/s. car b has a mass of 1000 kg and is moving at 30 m/s. which car has more kinetic energy and why

Answers

Answer:

Hope the pictures will help you

a ball is thrown in the air at 5m/s. If the ball was thrown at a 4 degrees angle. How long will it take to return to its original height?

Answers

Answer:

0.5seconds

Explanation:

where

initial velocity u=5m/s

gravity g=9.8m/s²

final velocity v=0m/s (since velocity at maximum height is 0)

time t=?

using

v=u-gt

0=5-9.8(t)

0=5-9.8t

9.8t=5

t=5/9.8

t=0.5102040816

t=0.5sec

please rate as brainliest

Mr. Red Herring was found shot dead in his backyard. He was about a foot away from his back porch, lying next to his personal handgun. A bloody footprint was also found on the porch. Analysis of a bullet found nearby suggests that, based on the striation marks, the bullet that killed Herring came from a gun discarded in a nearby trash can. He apparently had a date that night with Mrs. Scarlet. Based on various evidence, the forensics team also created a digital rendering of the crime.

Answers

An example of demonstrative evidence is the digital rendering of the crime scene that shows where the gun was fired from. That is option B.

What is demonstrative evidence?

A demonstrative evidence is the type of evidence that is being represented using visuals to help enhance the facts of a claim made against an opponent in the law court.

The components of demonstrative evidence include the following:

photos, x-rays, videotapes, movies, sound recordings, diagrams, forensic animation,maps and drawings.

Based on the various evidence presented concerning the sudden death of Mr. Red Herring who was short dead in his backyard, the demonstrative evidence is when the forensics team also created a digital rendering of the crime showing where the gun was shot.

Learn more about forensics here:

https://brainly.com/question/19238665

#SPJ1

Options of question:

In this story, which is an example of demonstrative evidence?

The fingerprint that showed that Mrs. Scarlet handled the gun

The digital rendering of the crime scene that shows where the gun was fired from

The report about bullet striations that prove the shot came from the discarded weapon

The DNA evidence gathered from the blood splatters

Two cars are moving along a stright line in the same direction with a velocity of 25 km/h and 30 km/h respectively. find the velocity of car a relative to car b ​

Answers

Answer:

Explanation:

V = Vb - Va = 30 - 25 = 5 km/h

for the following​ trajectory, find the speed associated with the trajectory and then find the length of the trajectory on the given interval. r​(t)​, for 0

Answers

The Fundamental Theorem of Calculus is used to evaluate the definite integral. A important tool for simulating the dynamics of moving objects and other physical phenomena is the parametric form.

For a parameter t, the dynamics or trajectory of a moving object is given in parametric form. We determine the speed of the object over the range of its parameter using derivatives and a definite integral. The Fundamental Theorem of Calculus is used to evaluate the definite integral. A important tool for simulating the dynamics of moving objects and other physical phenomena is the parametric form.

The velocity function or vector's absolute value or norm can be used to calculate an object's speed.

We obtain the velocity v(t) as the first derivative of the position trajectory given as follows since the velocity is the rate of change of the distance traveled:

v ( t ) = r ′ ( t ) = ⟨ ( 2 t 3 ) ′ , ( − t 3 ) ′ , ( 3 t 3 ) ′ ⟩ = ⟨ 6 t 2 , − 3 t 2 , 9 t 2 ⟩

The speed is given as either its norm or absolute value in the velocity function above as follows:

Speed(t)=∥v(t)∥=∥⟨6t2,−3t2,9t2⟩∥

=√(6t2)2+(−3t2)2(9t2)2=√36t4+9t4+81t4=√126t2(2)

The speed at t = 7 will be (2) from (2).

Speed(7)=√126×72=49√126.

Using (2) and the Calculus Fundamental Theorem, the trajectory's length L can be determined as follows:

L = ∫ 7 0 ∥ r ′ ( t )∥ d t = ∫ 7 0 ∥ v ( t ) ∥ d t = ∫ 7 0 √ 126 t 2 d t = √ 126 [ t 3 3 ] 7 0 = √ 126 [ 7 3 3 − 0 3 3 ] = 7 3 √ 126 3. \s.

To know more about parametric click on the link:

https://brainly.com/question/28537985

#SPJ4

Light travels at a speed of about 3.0 108 m/s.(a) How many miles does a pulse of light travel in a time interval of 0.1 s, which is about the blink of an eye?Δx = mi(b) Compare this distance to the diameter of Earth. (Use 6.38 106 m for the radius of the Earth.)ΔxDE =

Answers

Given:

Speed of light = 3 x 10⁸ m/s

Let's solve for the following:

• (a). How many miles does a pulse of light travel in a time interval of 0.1 s, which is about the blink of an eye?

Apply the formula:

[tex]\Delta x=v*t[/tex]

Where:

v is the speed of light

t is the time.

Thus, we have:

[tex]\begin{gathered} \Delta x=3.0\times10^8*0.1 \\ \\ \Delta x=3.0\operatorname{\times}10^7\text{ m} \end{gathered}[/tex]

Now let's convert the answer from meters to miles.

Where:

1 mile = 1609.34 meters

[tex]\begin{gathered} 3.0\times10^7=\frac{3.0\times10^7}{1609.34} \\ \\ =18641.14\text{ mi} \end{gathered}[/tex]

Δx = 18641.14 mi

• (b). Compare this distance to the diameter of Earth.

Apply the formula:

[tex]\frac{\Delta x}{D_E}=\frac{\Delta x}{2*r}[/tex]

Where:

r = 6.38 x 10⁶ m.

Thus, we have:

[tex]\frac{\Delta x}{D_E}=\frac{3.0\times10^7}{2*6.38\times10^6}=2.35[/tex]

ANSWER:

• (a). 18641.14 mi

,

• (b). 2.35

a parallel-plate capacitor is formed from two 4.0 cm x 4.0 cm electrodes spaced 2.0 mm apart. the electric field strength inside the capacitor is 1.0 x 106 n/c. what is the charge (in nc) on each electrode?

Answers

Equation Q/A = E Electric Field within a parallel plate capacitor

Q = E*Aε

E = 10^6 N/C

A = 4*4 = 16cm^2 = 16 * 10^-4 m^2

ε = 8.852 * 10^-12 F/m

Q = +/- 10^6 * 16 * 10^-4 * 8.852 * 10^-12

= +/- 141.6 * 10^-10 C

= +/- 14.2 nC

You can think of an electric field as a physical field that surrounds all charged particles and pulls on them all.

Before the dielectric breaks down, a parallel plate capacitor can only hold a certain amount of energy. It can be stated as follows: The parallel plate capacitor is a device that uses two parallel plates connected across a battery to create an electric field between them.

A nonmetallic component of a circuit is made in touch with using an electrode, an electrical conductor. Depending on the type of battery, electrodes are a crucial component that can be made of a range of materials.

To know more about parallel-plate capacitor, click on the link below:

https://brainly.com/question/12923362

#SPJ4

A trumpet plays middle C (262 Hz). How fast would it have to be moving to raise the pitch to C sharp (277 Hz)? Use 343 m/s as the speed of sound.

Answers

The trumpet would have to be moving at a speed of approximately 345.8 m/s to raise the pitch to C sharp.

What is speed?
In everyday language and kinematics, an object's speed (typically abbreviated as "v") is defined as the size of the change in position that occurs over time or the amount of change that occurs per period of time; it therefore a vector quantity. The instantaneous speed is the upper limit of the average speed as the time interval's duration gets closer to zero; it is calculated by dividing the distance travelled by the time interval's duration. Speed and velocity are distinct concepts.

Speed is measured as distance divided by time.

To raise the pitch of a note by one semitone, the speed of sound must be increased by approximately 6%. In this case, the trumpet would have to be moving at approximately 364 m/s to raise the pitch to C sharp.

To learn more about speed
https://brainly.com/question/4931057
#SPJ9

two conductors made of the same material are connected across the same potential difference. conductor a has eight times the diameter and eight times the length of conductor b. what is the ratio of the power delivered to a to the power delivered to b?

Answers

The power given to A is 7 times more powerful than the power delivered to B. So, the ratio of the power delivered to a to the power delivered to b is 7:1.

A wire's cross sectional area is computed as follows:

A= πd²/4

A wire's resistance is calculated as;

R= pL/A

R= 4pL/πd²

opposition in wire A;

R= 4pALA/πd²A

opposition in wire B;

P = V²/R

wired power delivery;

P= V²A/RA

energy provided through cable A;

P= V²b/Rb

energy transferred through wire B;

Replace R's value in the power delivered through wire A;

PA= V²A/RA = V²Aπd²/4pALA

PA/PB = d²A/LA x LB/V²B/d²B

The diameter and length of wire A are both seven times greater than those of wire B;

PA : PB = 7 : 1

Consequently, the power given to A divided by the power transferred to B equals 7 : 1

To know more about power click on the link:

https://brainly.com/question/3586518

#SPJ4

A dart shot at a monkey is traveling 10 m/s horizontally, while simultaneously traveling 7 m/s downward. At what angle below the horizontal is the dart traveling? Answer in degrees

Answers

The angle below the horizontal the dart shot at 10 m/s horizontally and 7 m/s downward is 55°

In a right angled triangle,

tan θ = Opposite side / Adjacent side

Here the resultant velocity, horizontal and vertical components makes a right angled triangle.

Opposite side = Horizontal component = 10 m / s

Adjacent side = Vertical component = 7 m / s

tan θ = 10 / 7

tan θ = 1.43

θ = [tex]tan^{-1}[/tex] ( 1.43 )

θ = 55°

The formula used to solve the problem is a trigonometric ratio. Trigonometric ratios are applicable only on a right angled triangle. Some of the basic trigonometric ratios are:

sin θ = Opposite side / Hypotenusecos θ = Adjacent side / Hypotenuse

Therefore, the angle below the horizontal, the dart is traveling is 55°

To know more about trigonometric ratio

https://brainly.com/question/23130410

#SPJ1

Since gravity is a conservative force, the work done against gravity can be replaced by gravitational potential energy. When an object is thrown vertically upward, its gravitational potential energy true or false?.

Answers

A ball's gravitational potential energy will rise as it is launched vertically upward.

An object's gravitational potential energy is the power it has as a result of being in a gravitational field. The gravitational potential energy is most frequently used for an object close to the Earth's surface, when the gravitational acceleration is believed to remain constant at around 9.8 m/s2. Since any point can be chosen as the gravitational potential energy zero (just like any coordinate system zero), the potential energy at a height h above that point is equal to the work that would be needed to lift the item to that height with no net change in kinetic energy. Its weight must be lifted with the same amount of force, so the gravitational potential energy must also be equal. The gravitational potential energy is most frequently used for an object close to the Earth's surface, when the gravitational acceleration is believed to remain constant at around 9.8 m/s2. Multiple factors affect the gravitational potential energy of an object: its mass, the gravitational acceleration it experiences from the earth, and its distance from the ground.

Learn more about gravitational potential energy here:

https://brainly.com/question/3884855

#SPJ4

Other Questions
Give an example of a specific reason that caused a time period to end and a new one to begin- be sure to name the time periods involved.Example: The Permian ended with a mass extinction which started the Triassic or The Precambrian and Paleozoic change comes from the presence of hard parts in animals. (DO NOT use the example as your own, choose a different time period)for EARTH and SCIENCE Write an inequality that represents the graph below What are the dimensions of the rectangle with Maximum area? give the historical significance of christopher columbus in 2-3 sentences Listed in the Item Bank are some important labels for sections of the image below. To find out more information about labels, some have more details available when you click on them. Drag and drop each label to the corresponding area it identifies in the image. Which word best defines the term Renaissance?birthrebirthbeginningend Use the following image to complete the sentences describing the ratio of spots to eyes.A ladybug with 2 eyes and 6 spots.A ladybug with 2 eyes and 6 spots.There are 6 spots for every eyes.There are spots for every 1 eye. The population of a certain town was 10,000 in 1990. The rate of change of the population, measured in people per year, is modeled by P prime of t equals two-hundred times e to the 0.02t power, where t is measured in years since 1990. Discuss the meaning of the integral from zero to twenty of P prime of t, d t. Calculate the change in population between 1995 and 2000. Do we have enough information to calculate the population in 2020? If so, what is the population in 2020? Explain your answers. What is the value of q in the equation ?610 What is a whole step above G on a piano What does Amara hope willhappen when Dad sits on the sofa?She hopes Dad and Grandpa will writepoetry together.She hopes Dad and Grandpa will talkto each other.She hopes Dad and Grandpa will callMom tonight.She hopes Dad and Grandpa willdecide to play basketball.D% What is Kepler's laws of planetary motion? find the sum of the measure of the angle of a three sided polygon nouOR36, 27,814'Find the 10th term.Submit Answer Steve files head of household. In 2022, he received $23,000 in social security benefits, $10,000 in taxable retirement income, and $4,000 in interest and dividend income. Using the Social Security Benefits Worksheet - Line 6a and 6b, determine Steve's taxable social security benefits. I am having trouble with the last two questions. I worked through finding the slope and y-intercept with a previous tutor, before we got disconnected.6. Express this equation as a function D of P and find its domain.7. How many shirts per month will be demanded if the price is $27? Is (-2,-6) a solution to the equation y = 3x?OyesOno The student council at Baker High School is planning a dance. The table shows their budget. What is the student councils expected profit?Item. Funds raised. ExpensesDance tickets. $400DJ fuze. -250Decorations. -125 What is 2 5/8 as a equivalent percent Suppose windell corporation understates its ending inventory amount. What effect will this have on the reported amount of net income in the year of the error?.