Hydrogen gas reacts with alkynes in the presence of a Lindlar catalyst by syn addition of hydrogen, resulting in a cis alkene product. A Lindlar catalyst is "poisoned" (often with lead) such that the reaction stops primarily at the alkene product.
HELP ASAPPPPPPPPPPPPPPPP PLEASEEEEE
Answer choices
Na2SO4
Al2(SO4)3
BaCl2
NaOH
Na2CrO4
Ba(NO3)2
which of the following options correctly describe a titration? select all that apply. multiple select question. in a titration the volumes of both solutions must be known. in a titration, the standard solution is one that has an accurately known concentration. a titration relies on a reaction that takes place in solution. a titration can only be used to determine the concentration of an acid or a base. the concentrations of both solutions must be known before the titration is carried out.
Statement correctly describes a titration : A titration relies on a reaction that takes place in solution.
What Is Meant by TitrationBasically, titration is a chemical method to determine the concentration of a solution. The trick is to react a solution in a certain volume with another solution whose concentration of the substance is known. This known solution is called a frozen solution. While the purpose of the titration itself is to determine the pH level of a chemical substance. The end point is when the indicator changes color.
This titration measurement usually uses several special tools, including a burette, stative, Erlenmeyer tube, rubber suction cup, watch glass, dropper pipette, measuring flask, and volume pipette. One of the conditions for the titration to run well is that it is characterized by a fast reaction, you can even use a catalyst to speed up the reaction. Furthermore, the reaction proceeds simply and the stoichiometric equation is clear. Then there are no side reactions that can affect the main reaction.
Titration TypeBased on the type, the titration is divided into four types. The three types are redox titrations, complexation titrations, and acid-base titrations and argentometry. For more details about these three types of titration, you can see in the following review.
Redox Titration
For this type of redox titration is a type of titration that processes with redox reactions. Redox in titration is still divided into three. Namely those that use I2 and are indirect titrations. This is because the reacted I2 is still made by the previous redox reaction. Meanwhile for the second type is iodometric titration which is used directly in I2 and can be called a direct reaction. The third type of redox is permanganometric where the reaction utilizes Mn2+ ions.
Complexation TitrationThis type of complexation titration is actually a titration that uses complexation reactions and the formation of complex ions. Its use is usually to analyze metal levels. When you want to do a type titration there are several things to consider. This is more because the formation of complex ions is very specific under certain conditions.
Acid Base TitrationThe third type of titration is the acid-base titration. Actually, for this titration it refers more to a quantitative analysis method based on acid-base reactions. The indicators used are usually those that can profile the color change at a certain pH.
Argentometry TitrationThis last type is argentometric titration. This titration is a titration commonly used for precipitation reactions. Based on the principle of argentometric titration regarding solubility as well as the product constants of the reacting reagents. The method for Argentometric titration is divided into the Mohr method, the Volhard method, and the Fajans method.
Learn more about titration at https://brainly.com/question/24704707.
#SPJ4
when 0.1 mol of a is mixed with 0.1 mol of b in the reaction chamber and the reaction runs to completion, the 1500 ml of water in the calorimeter heats up from 24.2°c to 25.9°c. what is δh° for the reaction in kj/mol?
When 0.1 mol of a is mixed with 0.1 mol of b in the reaction chamber and the reaction runs to completion, the 1500 ml of water in the calorimeter heats up from 24.2°C to 25.9°C. ΔH for the reaction in kJ/mol is 106.59 kJ/mol
The ΔH for the reaction is given as :
ΔH = m c ΔT
where,
mass, m = 1500 g ( density of water is 1 g / mL)
c = specific heat = 4.18 J/ g °C
ΔT = 25.9°C - 24.2°C = 1.7 °C
ΔH = 1500 × 4.18 × 1.7
ΔH = 10659 J
ΔH = 10.659 kJ
mole = 0.1 mol
ΔH = 10.659 / 0.1
ΔH = 106.59 kJ/mol
To learn more ΔH here
https://brainly.com/question/29726160
#SPJ4
Oxygen can be produced in the chemistry lab at a low temperature if mixed with manganese dioxide, which acts as a catalyst in the reaction. The chemical equation for the production of oxygen using potassium chlorate is:.
The process of 2KClO3 → 2KCl + 3O2 exhibits both oxidation-reduction and breakdown.
When a specie is broken down into its component parts, it is said to be decomposing. KClO3 was converted into KCl and O2 during this process. Because of this, the reaction is categorized as one of breakdown.
It is also an oxidation-reduction reaction since the oxidation number of the chlorine atom was decreased from +5 to -1 while the oxidation number of the oxygen atom was enhanced from -2 to zero.
So, It's important to keep in mind that a reaction can only be a combustion if oxygen is one of the reactants.
To learn more about Decomposition, here :
https://brainly.com/question/23531956?referrer=searchResults
#SPJ4
The melting point of a solid is 24.9°C. As heat is added to melt the solid, what happens to the particles?
When solids melts to form liquids by applying heat, the closely packed particles of the solid gets apart and the intermolecular force of attraction weakens. Thus, they starts to flow.
What is melting point?Melting point of a substance is the temperature at which the solid state converts to liquids state where the two states are in equilibrium. In solid state, the particles are closely packed by the strong intermolecular force of attraction.
In liquid state, the force of attraction between the particles is less than that in solids and they have some space in between to move apart. Therefore they don't have definite shape and will flow.
When solids are heated to the melting point, the particles inside acquires heat energy to move apart and starts to melt finally forms their liquid state.
To find more on melting point, refer here:
https://brainly.com/question/29578567
#SPJ1
consider a reaction where the kc is 12.6 and the rate constant for the reverse reaction is 5.1 x 10^-2 sec. what is the rate constant
Using the equilibrium constant mean formula, the rate constant of the reverse reaction is 64.26 × 10∧-2 sec.
What does the Equilibrium constant mean?The value of a chemical reaction's reaction quotient at chemical equilibrium, a condition that a dynamic chemical system approaches when enough time has passed and at which its composition has no discernible tendency to change further, is the equilibrium constant for that reaction. The equilibrium constant is independent of the initial analytical concentrations of the reactant and product species in the mixture for a given set of reaction conditions. As a result, the composition of a system at equilibrium can be calculated from its initial composition using known equilibrium constant values. However, factors affecting the reaction such as temperature, solvent, and ionic strength may all affect the equilibrium constant's value.
Given;
Kc=12.6;
Rate of backward Reaction=Rb=5.1×10∧-2 sec;
Now,
Kc = [tex]\frac{Rf}{Rb}[/tex];
Rf = Kc × Rb;
⇒Rf = 12.6×5.1×10∧-2 = 64.26×10∧-2 sec.
⇒Rf = 64.26×10∧-2 sec.
Using the equilibrium constant mean formula, the rate constant of the reverse reaction is 64.26 × 10∧-2 sec.
To know more about Equilibrium Constant visit:
https://brainly.com/question/3159758
#SPJ4
the empirical formula of a compound is ch2. its molecular mass is 70 g/mol. the molecular formula of the compound is
The molecular mass is indicated as being 70 g/mol. The molecule's chemical formula is C5H10
How can I determine the molecular mass?Use the mass listed in the Table Of the elements or Atomic Weight Tables to get the atomic mass for every element. To calculate the molecular mass, multiply the subscript (count of atoms) by the atomic mass of the relevant element then add the weights of all the other elements in the molecule.
How many moles is a gramme?The molarity of an element's atoms is determined by multiplying its standard comparative atomic mass by the molar constant, 1 103 grammes = 1 g/mol.
To know more about molecular mass visit:
https://brainly.com/question/18446366
#SPJ4
a sample of 63.6 grams of copper completely reacted with oxygen to form 71.6 grams of a copper oxide product. how many grams of oxygen must have reacted?
16.01 grams of oxygen must have reacted .
Calculation :
Reaction : 2Cu + O₂ -> 2CuO
Theoritical moles of Cu : O₂ = 2 : 1
Moles of Cu = mass/molar mass = 63.6/63.546 = 1.001 mol
Moles of O₂ = mass/molar mass = 71.6/32.0 = 2.238 mol
Experimental of Cu : O₂ = 1.001 : 2.238 = 0.4 : 1.0
Excess reactant is O₂
Limiting reactant is Cu
Moles of O₂ reacted = 0.5*moles of Cu
moles of O₂ reacted = 0.5 x 1.001 = 0.5004 mol
mass of O₂ reacted = moles x molar mass = 0.5004 x 32.00 = 16.01 g
mass of O₂ reacted is 16.01 g
A chemical reaction is the process of chemical transformation of one group of chemicals into another group. Classical chemical reactions involve changes that affect only the position of electrons in forming and breaking chemical bonds between atoms, with no changes in the nucleus (no changes in the elements present) and many If , it can be described by a chemical equation. Nuclear chemistry is a subfield of chemistry that deals with chemical reactions of unstable radioactive elements in which both electronic and nuclear changes can occur.
Learn more about reaction here : https://brainly.com/question/26283409
#SPJ4
A layer of ethyl alcohol (n = 1. 361) is on top of water (n = 1. 333). To the nearest degree, at what critical angle relative to the normal to the interface of the two liquids is light totally reflected?.
The angle relative to the normal interface of the two liquids at which the light is totally reflected is 78 degrees.
What is Snell's law?
The incident rays' landing point and the angle it forms with the refracted ray—not to mention the normal line that is dropped on the plane perpendicularly—create the point of refraction. In contrast to reflection, the medium through which the light rays are flowing produces a significant change in refraction. The refractive indices highlight Snell's Law's dependence on the medium.
Snell's Law, also referred to as the Law of Refraction, is an equation that connects the angles of incident and transmitted light at the meeting point of two dissimilar media. All materials and phases of matter are subject to Snell's Law.
the refractive index of the ethyl alcohol =1.361
the refractive index of the water =1.333
According to Snell's Law of refraction;
Ф=78
Therefore, we can conclude that the angle relative to the normal interface of the two liquids at which the light is totally reflected is 78 degrees.
Learn more about Snell's Law from given link
https://brainly.com/question/22266487
#SPJ4
WHAT is (1) way you can tell the DIFFERENCE between Eukaryotic and Prokaryotic cells.
The one way you can the difference between Eukaryotic and Prokaryotic cells is the presence of a membrane-bound nucleus.
Eukaryotic cells are organisms that have a membrane-bound nucleus. They are multi-cellular and have a large cell size. They are more complex and have a linear DNA form. They are normally found in animals, plants, etc.
Prokaryotic cells are unicellular organisms with no membrane-bound nucleus. They have small cells. They are simple and circular, and are encased by a cell wall. They do not have any mitochondria in them.
They both help in protein synthesis. They belong to the kingdom of bacteria.
To learn more about Eukaryotic and Prokaryotic cells,
brainly.com/question/15842891
a 100.0 ml sample of 0.10 m ca(oh)2 is titrated with 0.10 m hbr. determine the ph of the solution after the addition of 300.0 ml hbr.
Formula to determine Ph after Titration: pOH = -log(OH).
The pH of the solution after the addition of 300.0 ml of HBr is 1.6.
What is a Titration?Titration is a popular laboratory technique for quantitative chemical analysis to calculate the concentration of an identified analyte (also known as titrimetry and volumetric analysis) (a substance to be analyzed). A standard solution with a known concentration and volume is created as the reagent, also known as the titrant or titrator. To ascertain the concentration of the analyte, the titrant reacts with a solution of the analyte (also known as the titrant). The titration volume is the amount of titrant that interacted with the analyte.
Now;
Conc of Ca, pH of the solution before the addition of any HBr. :
pOH = -log(OH)
[OH-] = 2*[Ca(OH)2] = 2*(0.1) = 0.2 M
pOH = -log(0.2) = 0.698
pH = 14-0.698
pH = 13.3
pH of the solution after the addition of 300.0 mL HBr:
mmol of OH- = 2*MV = 2*100*0.1 = 20 mmol of OH-
mmol of H+ = MV = 0.1*V = 0.1*300= 30 mmol of HBr
left ion = 30-20 = 10 mmol of OH-
V = 100+300 = 400 mL
[H+] = 10/400 = 0.025 M
pH= -log(0.025 ) = 1.6
Formula to determine Ph after Titration: pOH = -log(OH).
The pH of the solution after the addition of 300.0 ml of HBr is 1.6.
To refer more about Titration, visit:
https://brainly.com/question/186765
#SPJ4
4. A general description of the single replacement reaction in this exper- iment is: metal + salt in solution → "new" metal + "new" salt solution. Give a balanced equation for another example of this type of single re- placement reaction.
Answer:
Salt°37Water°Solution.
Explanation:
It will be snow because H2o + Car36° - 47° = Snow because water + salt will dissolve into snow. The metal and salt in solution will be salt water. H2° + Car36° - 47° = Salt°37Water°Solution.
Assuming that no new water molecules entered the glass while the water was freezing, would you say that frozen water (ice) takes up more space than liquid water, less space, or about the same?
Answer:
Frozen water(ice) indeed takes up a larger volume than water in liquid state.
Explanation:
This is because when water liquid turns into a solid, energy is absorbed hence it gets cooler, the bonds are strengthen and expands to its maximum.
this means that the structure changes when water turns to ice, from the semi random arrange in liquid state to lattice in ice. this expansion between the molecules have alot of space between it, the molecules are less compact.
Since the molecules are less compact, ice is therefore less dense than water, hence it floats on water and not sink.
And this almost means that ice increases in volume by approximately 9% than its initial liquid water.
the radium isotope has a half-life of 1600 years. a sample begins with atoms. how many are left after (a) 200 years, (b) 2000 years, and (c) 20,000 years?
Atoms * 0.881 for 200 years, Atoms * 0.215 for 2000 years and Atoms * 0.000244 for 20,000 years are left.
What are Radium isotopes?
Radium isotopes are radioactive isotopes of the element radium. They are produced naturally as a result of the decay of uranium and thorium in the environment, and they can also be produced artificially in nuclear reactors. Radium isotopes are used in a variety of applications, including medical diagnostics, cancer treatments, and industrial radiography.
So,
a) For 200 years,
Step 1: Calculate the number of half-lives that have passed in 200 years.
200 years / 1600 years = 0.125 half-lives.
Step 2: Calculate the amount of radium remaining using the formula:
Amount Remaining = Initial Amount * (1/2)^(Number of Half-Lives)
Amount Remaining = Atoms * (1/2)^0.125
Amount Remaining = Atoms * 0.881.
b) For 2000 years,
Step 1: Calculate the number of half-lives that have passed in 2000 years.
2000 years / 1600 years = 1.25 half-lives
Step 2: Calculate the amount of radium remaining using the formula:
Amount Remaining = Initial Amount * (1/2)^(Number of Half-Lives)
Amount Remaining = Atoms * (1/2)^1.25
Amount Remaining = Atoms * 0.215.
c) For 20,000 years,
Step 1: Calculate the number of half-lives that have passed in 20,000 years.
20,000 years / 1600 years = 12.5 half-lives
Step 2: Calculate the amount of radium remaining using the formula:
Amount Remaining = Initial Amount * (1/2)^(Number of Half-Lives)
Amount Remaining = Atoms * (1/2)^12.5
Amount Remaining = Atoms * 0.000244.
What are Atoms?
Atoms are the basic building blocks of all matter. They are tiny particles that are composed of protons, neutrons, and electrons. Atoms are the smallest unit of matter that can exist, and they form the basis of all chemical elements.
To know more about Atoms,
https://brainly.com/question/16666188
#SPJ4
PLEASE HELP!!! LOTS OF POINTS!!!
Number of valence electrons:
Barium: 2
Phosphorus: 5
Oxygen: 6
b) Based on the number of valence electrons, write the monatomic ion (symbol with charge) each element may form.
c) Phosphorus and oxygen can bond to form a polyatomic ion. Write the formula of for this ion and be sure to include the ion charge.
d) Using the monatomic ions you listed above in (b), the polyatomic ion from (c), write the formulas for the three ionic compounds these ions could form.
Answer: oxygen needs two take away- two rings
phosphorus needs three taken away- three rings
barium needs two added- six rings
oxygen and barium are the same.
Explanation:
would transition a represent emission or absorption of light? how would the wavelength of the emitted or absorbed photon compare to that of the photon involved in transition c? explain.
Transition A represents emission of light. This is shown by the downward facing arrow. This photon compares to transition C in the simple fact that A gave up 12.1 eV (therefore it is more intense), whereas C only gave up 10.2 eV (less intense).
The photon A and photon B frequencies were not specified in this case. It is impossible to determine which photon has more energy than the other as a result. It should be noted that the wavelength and electromagnetic frequency of the photon are inversely correlated with the quantity of energy. The corresponding wavelengths were described, but this description is insufficient to estimate the energy of each photon. In conclusion, the wavelength reduces the energy of the photon whereas the frequency controls its amount of energy.
would transition a represent emission or absorption of light? how would the wavelength of the emitted or absorbed photon compare to that of the photon involved in transition c? explain.
Learn more about photon here:
https://brainly.com/question/20912241
#SPJ4
Rachel is performing an acid-base titration. She hopes to determine the concentration of an unknown acid solution to two decimal places. Which is the best tool to find the volume of the base that she needs to neutralize the acid? beaker erlenmeyer flask graduated cylinder buret.
in laboratory, the best answer is a buret.
What is buret?A burette is a graduated and the glass tube with a tap at the one end, for delivering the known volumes of to a liquid, especially in the titrations. It is a long, graduated glass tube, with in a stopcock at its lower end and a tapered capillary and tube at the stopcock's outlet.
It is the standard tool used in a titration method. Also, it is the best glassware because you can read directly the amount of volume added to a solution.
To know more about laboratory click-
https://brainly.com/question/26264740
#SPJ4
Answer: Buret
Explanation:
place the best reagent in the bin for each of these reactions involving cyclohexylmethanol.
The best reagent in the bin for each of these reactions involving cyclohexylmethanol to cyclohexyl methyl bromide is NaBr.
The reagent used in the reaction of the cyclohexylmethanol to cyclohexyl methyl bromide is NaBr. the reaction is given as follows :
cyclohexylmethanol + NaBr ------> cyclohexyl methyl bromide
The reagent is used in the chemical reaction in order to find out the the another substances if it is present. A reagent is a substance is used to perform the laboratory test. the reagent is used to perform the above reaction is NaBr.
Thus, NaBr is the reagent used in cyclohexylmethanol to cyclohexyl methyl bromide.
To learn more about reagent here
https://brainly.com/question/1371772
#SPJ4
The iron corrosion, rusting, can be prevented by coating with __________, __________ and __________ .
Why would it not be pratical to use water for a barometer on a regular basis? what other liquid might be a good option?.
Using water for a barometer is not practically good, as water has a very low density so to create pressure, a large volume will be required which is not cost-effective, choose mercury, for it as it has high density.
What is Barometer?
An instrument for measuring air pressure in a specific environment is a barometer. Short-term changes in the weather can be forecasted based on pressure tendencies. The surface weather analysis makes extensive use of air pressure sensors. It will assist in locating pressure systems, frontal limits, and surface troughs. It is a scientific tool that is useful for determining barometric pressure, which is the measurement of atmospheric pressure.
What is Density?
It is a mass of a substance per unit volume. d = M/V, where d is density, M is mass, and V is volume, is the formula for density.
Hence, using water for a barometer is not practically good, as water has a very low density so to create pressure, a large volume will be required which is not cost-effective, choose mercury, for it as it has a high density.
To know more about Barometer, check out:
https://brainly.com/question/11904913
#SPJ4
how to claculate (b) what fraction of the chemical energy transformed appears as internal energy in the batteries?
a.) The resistance of the bulb is calculated l to be 4.58 Ohm and b.) The fraction of the chemical energy transformed which appears as internal energy in batteries is 8.4%.
What is electromotive force?Energy transfer to an electric circuit per unit of electric charge measured in volts is called electromotive force .
Given, Voltage= 1.5 Volts
Internal resistance A is 0.240 Ohms
Internal resistance B is 0.180 Ohms
and current = 600 mA = 0.6 Amps
a. To find resistance of the bulb:
The total electromotive force (E) of the electric circuit:
E = 2*1.5
= 3.0 Volts
Total internal resistance = 0.240 + 0.180 = 0.42 ohms
Electromotive force (E) is given by the formula:
E= V+ I r
E is electromotive force
V is voltage and I is the current.
r is internal resistance.
Ohm's law is given by:
V= I R
Given, Resistance, R = 4.58 Ohms
E = IR + I r
R= E/I - r
= (3/0.6) - 0.42
= 4.58 ohms
b. To determine what fraction of chemical energy transformed appears as internal energy in batteries:
the electromotive force (E) in the batteries. E b = I R
= 0.6 * 0.42
= 0.252 Volt
Percent= (Eb / E) * 10
=0.252/3
percent = 8.4 %
To know more about electromotive force, refer
https://brainly.com/question/24168205
#SPJ4
Note: The question given on the portal is incomplete. Here is the complete question.
Question : Two 1.50-V batteries—with their positive terminals in the same direction—are inserted in series into the barrel of a flashlight. One battery has an internal resistance of 0.240 Ω, the other an internal resistance of 0.180 Ω. When the switch is closed, a current of 600 mA occurs in the lamp. (a) What is the bulb's resistance? Ω (b) What fraction of the chemical energy transformed appears as internal energy in the batteries? %
Seals, sea birds, and polar bears use arctic sea ice like that shown below as a place to find food and shelter and to raise young.
Seals, sea birds, and polar bears use arctic sea ice like that shown below as a place to find food and shelter and to raise young.
Due to increased melting of the arctic sea ice, many of these organisms are unable to gather sufficient amounts of food or raise offspring to maturity. Based on this information, which of the following statements is a reasonable conclusion about the Arctic ecosystem?
Due to increased melting of the arctic sea ice, many of these organisms are unable to gather sufficient amounts of food or raise offspring to maturity. Based on this information, which of the following statements is a reasonable conclusion about the Arctic ecosystem?
Answer Explanation:
A reasonable conclusion about the Arctic ecosystem based on the information provided is that the melting of the Arctic sea ice is negatively impacting the ability of seals, sea birds, and polar bears to find food and shelter and to raise their young. This melting is likely to have other impacts on the ecosystem as well, such as changes in the distribution and abundance of other species that depend on sea ice for their survival. Overall, the melting of the Arctic sea ice is likely to have significant and potentially detrimental effects on the Arctic ecosystem and the organisms that live there.
a compound composed of 3.3% h, 19.3% c, and 77.4% o has a molar mass of approximately 60 g/mol. what is the molecular formula of the compound?
The molecular formula of the compound would be [tex]H_2CO_3[/tex].
Molecular formulaThe molecular formula of compounds is related to their empirical formula, such that:
[Empirical formula]n = Molecular formula
Where n is the ratio of the molar mass of the molecular formula and the molar mass of the empirical formula.
Now, let's find the empirical formula of the compound:
H = 3.3 C = 19.3 O = 77.4
The moles equivalent of each atom can be calculated by dividing by their molar weights.
H = 3.3/1 = 3.3 mol
C = 19.3/12 = 1.6 mol
O = 77.4/16 = 4.8
Dividing through by the smallest mole:
H = 3.3/1.6 = 2.1
C = 1.6/1.6 = 1.0
O = 4.8/1.6 = 3.0
Thus, the empirical formula of the compound is [tex]H_2CO_3[/tex].
Molar mass of the empirical formula = 2+12+48 = 62 g/mol
Molar mass of the molecular formula = 60 g/mol
n = 62/60 = 1.
In other words, the molecular formula of the compound is the same as the empirical formula, [tex]H_2CO_3[/tex].
More on molecular formulas can be found here: https://brainly.com/question/28647690
#SPJ1
The table lists good and poor conductors of heat.
Good Conductors Poor Conductors
steel
copper
aluminum
gold
glass plastic
rubber
wood
Which best describes materials that are poor conductors of heat?
O A. soft
• B. hard
• C. not metal
• D. not smooth
Good Conductors ;
copper, gold, aluminum, steel
Poor Conductors ;
glass ,rubber, wood, plastic,
What are good and poor conductors of heat ?Steel and bronze have the lowest heat conductivity, while metals like copper and aluminum have the highest. Copper is a good material for heat exchangers because it is a good heat conductor. Examples of effective electrical and heat conductors are gold, silver, and iron.
Non-metals are poor heat conductors. Rubber and plastic are two examples of lousy conductors.Metals such as copper, silver, and others make good conductors. Poor conductors are substances that do not permit the flow of electricity through them. Poor conductors include, for example, rubber, glass, and wood. Copper iron, for instance. faulty conductors "Bad conductors of heat" or "poor conductors of heat" refers to materials that do not readily conduct heat. Think of wood cloth.To know more about Conductors please click here ; https://brainly.com/question/492289
#SPJ1
Describe what happens to the freezing point when tin is added.
Answer:
The freezing point of a substance is the temperature at which it changes from a liquid to a solid. When tin is added to a substance, it can lower the freezing point of the substance. This is known as a colligative property of matter, which refers to the ability of certain substances, such as solutes, to alter the physical properties of a solvent (such as the freezing point or boiling point) without changing the chemical composition of the solvent.
In the case of tin, when it is dissolved in a solvent, it can disrupt the interactions between the solvent molecules, making it more difficult for the solvent to form a solid. As a result, the freezing point of the solvent is lowered. This effect is more pronounced when the concentration of the solute is higher.
It's important to note that the freezing point depression caused by tin (or any other solute) is dependent on the concentration of the solute and the nature of the solvent. Different solvents will have different freezing points, and the freezing point depression caused by a given solute may vary depending on the solvent used.
Explanation:
If you have equal volumes of two different substances the denser the substance is lighter
If you weigh equal amounts or volumes of two different liquids, the liquid that weighs more is more dense.
What do you mean by volume?Volume is defined as the space occupied within the boundaries of an object in three-dimensional space. It is also known as the capacity of the object.
Moreover, volume is the amount of space a three-dimensional object occupies and it is measured in cubic units. Two examples of cubic units are cm3 or in3. Mass on the other hand is a measure of how much matter is in an object. Mass is often measured by how much something weighs (in units like pounds or kilograms).
Therefore, volume pertains to the three-dimensional space that is occupied by an object (i.e. solid, liquid, gas, or plasma). Volumes are determined by calculating the length, width, and height of the occupied space by an object.
Learn more about volume:
https://brainly.com/question/1578538
#SPJ1
In a single displacement reaction between al2s3 and li, what products will form and why?.
Lithium Sulphide ([tex]Li_{2}[/tex]S)and Al (Alumunium) will be formed In a single displacement reaction between al2s3 and li.
What is a single displacement reaction?
A single exchange reaction, also called a single substitution reaction, is a reaction in which one element in a compound is replaced by another. The starting materials are always pure elements such as pure zinc metal or hydrogen gas and aqueous compounds. When an exchange reaction occurs, a new aqueous compound and another pure element are produced as products.
Therefore, Lithium Sulphide ([tex]Li_{2}[/tex]S)and Al (Alumunium) will be formed In a single displacement reaction between al2s3 and li.
To know more about single displacement reaction, check out:
https://brainly.com/question/16396033
#SPJ4
A balloon with no molecule inide of it i placed on top of a flak that wa filled with ethanol vapor at a temperature of 270 K. It wa determined that the flak ha a total volume of 150 mL. What would be the volume of the balloon after the flak wa heated to a temperature of 330 K? The quetion i aking for the volume of the balloon after heating, not the total volume of the flak and the balloon
The volume of the balloon after heating, not the total volume of the flak and the balloon is 0.18 L.
An ideal gas is a theoretical gas composed of many randomly transferring factor particles that aren't difficult to interparticle interactions. the best gasoline idea is beneficial because it obeys the precise gas law, a simplified equation of country, and is amenable to evaluation under statistical mechanics.
Volume is a degree of occupied three-dimensional space. it's far more frequently quantified numerically the usage of SI-derived gadgets or by way of diverse imperial gadgets. The definition of length is interrelated with the extent.
Using the ideal gas equation:-
Given;
V₁ = 150 mL = 0.150 L
T₁ = 270 K
V₂ = ?
T₂ = 330 K
V₁/T₁ = V₂/T₂
V₂ = V₁T₂/T₁
= 0.150 × 330 / 270
= 0.18 L
Learn more about ideal gas here:-https://brainly.com/question/20348074
#SPJ4
a 250 ml sample of saturated a g o h solution was titrated with h c l , and the endpoint was reached after 2.60 ml of 0.0136 m h c l was dispensed. based on this titration, what is the k s p of a g o h ?
The ksp of AgOH is 1.98×10⁻⁸.
AgOH+HCL⇒AgCL(s)+H²O
Knowing the response⇒C₁V₁=C₂V₂
(AgOH) (HCL) (HCL)
By replacing, we obtain
⇒C₁×250ml=0.0136×2.60ml
C₁=0.0136×2.60/250
=0.000141
Now
AgOH=Ag+(OH)-
Hence,
=s²
=(0.000141)²
=1.98×10⁻⁸
So, the aforementioned answer is correct.
Why do you use the term "titration"?Titration is a method of chemical analysis where the quantity of a sample's ingredient is determined by adding a precisely measured amount of a different substance to which the desired constituent will react in a specific, known proportion.
To know more about Titration visit:-
https://brainly.com/question/2728613
#SPJ4
Which use of iron is due to its chemical properties?
Answer:
used as displacement agent dueing chemical reaction.
Explanation:
A chemical property of iron is that it is capable of combining with oxygen to form iron oxide.Iron forces hydrogen out of compounds by a displacement reaction.
Answer: oxygen bonding
Explanation: the iron found in blood is used to bind oxygen molecules so they can be transported.