Answer:
Tollen's test or silver mirror test is use to distinguish between ketone and aldehyde.
Explanation:
Tollen's test is use to distinguish aldehyde from ketone because Tollen reagent consist of silver nitrate and ammonia and it oxidized aldehydes to carboxylic acid and the silver Ag+ is reduced to solid silver Ag. It form a inner film wall on the tube that look like mirror. Ketone do not react with Tollen reagent and therefore does not form silver mirror on the tube wall.
Which term best describes the materials that make up rocks?
sand left by erosion
compressed magma
a mixture of minerals
layers of lava
Answer:
is c a mixture of minerals
Explanation:
Perform the arithmic shown AND round your answers to the correct number of significant digits.
56.5in + 95.3in + 15 in
(Fill in the blank)
Answer:
167in
Explanation:
Given arithmetic;
56.5in + 95.3in + 15in
To determine the correct significant digits, the sum cannot be more precise than the least precise value in the addition;
The least precise is 15in and it is in 2significant places;
56.5in
95.3in
+ 15 in
......................
166.8in
......................
The value is 167in
In the compound MgCl2, the subscript 2 indicates
The subscript 2 indicates number of Cl atoms
Further explanationThe molecular formula shows the number of atoms of a compound
whereas the empirical formula is the simplest comparison of the atoms making up the compound
MgCl₂ is an ionic compound composed of Mg and Cl atoms
Mg is in group 2 which has a +2 charge, while Cl is in the Halogen group which has a charge of -1
If the two are bonded, the 2 electrons released by Mg will be bound by 2 Cl atoms, each of which atoms of Cl need 1 more electron in order to obtain a stable electron configuration such as a noble gas
So the number 2 in the MgCl compound indicates the number of Cl atoms
1.For Structure B the bond between carbon and sulfur is polar or non polar
2. Explain you’re answer
Answer:
polar
Explanation:
because carbon and sulfur have different electronegativities, the S=C bond is polar.
The entire molecule is nonpolar however because the dipoles (polar bonds) cancel out due to the geometry of the molecule (linear)
plz help ❤️
Explain how the pH of water has a synergistic relationship with other substances.
Provide an example.
Answer:
Explanation:
he pH of the water will determine the toxic effects, if any, of these substances.
Pure water is neutral with the pH of 7. But when water combines with other substance the pH varies as per the acidity of the combining substance.
What is pH?pH is the measure of acidity of a solution and mathematically it is the negative logarithm of hydrogen ion concentration. Acidic substance have a pH of less than 7 whereas, basic substance have higher pH value.
Water when combines with some acids, its acidity increases. For example acid rain resulting from the reaction of rain water with oxides of nitrogen and Sulphur forming nitric acid and sulphuric acid.
pH of water have a role in the toxic effects of components in water pH and alkalinity of water determines the coagulation of other substances in water.
Hence, the properties of other substance in water is pH dependent and might effect the alkalinity or acidity of water as well the properties of substances in water such as toxicity.
To learn more about pH , refer the link below:
https://brainly.com/question/2288405
#SPJ2
Select the best answer from the choices below. Light has many properties of waves, but sometimes it also behaves like:
Answer:
A photon
Explanation:
When electrons pass close to the standing wave of light, they hit the particles that are called photons
X-rays are often used in medical settings to create images of the body's internal structures such as bones. This is made possible by the
fact that X-rays are able to pass through the body's softer tissues without being absorbed.
Radio waves are also able to pass through the body's softer tissues without being absorbed. Why are radio waves not used to generate
medical images?
OA. The electrons in most atoms are not in high enough energy states to absorb the photons of radio waves.
OB. Radio waves tend to bend too much when they encounter solid materials to be used for generating accurate images,
OC
The frequency of most radio waves is too low to allow them to pass through bones or other solid materials.
OD.
Radio waves carry so little energy that they tend to pass through most atoms without an interaction taking place.
Answer:D
Explanation:I did it on study island.
Radio waves are not used to generate medical images because as per the electromagnetic spectrum ,the radio waves carry little energy that they pass through most atoms without interaction.
What is an electromagnetic spectrum?The electromagnetic spectrum consists of radiation which consists of waves made up of electromagnetic field which are capable of propogating through space and carry the radiant electromagnetic energy.
The radiation are composed of electromagnetic waves which are synchronized oscillations of electric and magnetic fields . They are created due to change which is periodic in electric as well as magnetic fields.
In vacuum ,all the electromagnetic waves travel at the same speed that is with the speed of air.The position of an electromagnetic wave in an electromagnetic spectrum is characterized by it's frequency or wavelength.They are emitted by electrically charged particles which undergo acceleration and subsequently interact with other charged particles.
Learn more about electromagnetic spectrum,here:
https://brainly.com/question/15576247
#SPJ2
Name and write one polyatomic ion with its charge.
Answer:
Because these ions contain more than one atom, they are called polyatomic ions. Polyatomic ions have characteristic formulas, names, and charges that should be memorized. For example, NO3− is the nitrate ion; it has one nitrogen atom and three oxygen atoms and an overall 1− charge.
Polyatomic Ions.
Name Formula
sulfite ion SO32−
Explanation:
Which units can be used to describe the thermal
energy within a substance?
Answer: Btu, British Thermal Unit is used to express thermal energy when working in pounds and degrees Farenheit.
Calories are used when working in grams and degrees Centigrade or Kelvin (SI units)
A Joule is the British system unit used to measure heat transfer.
Explanation:
How many moles of CO are produced when 1.8 moles C reacts?
Express your answer using two significat figures.
5C(s) + 2SO2(g) => CS2(l) +4CO(g)
Answer:
1.44mole of CO
Explanation:
The reaction equation is given as:
5C + 2SO₂ → CS₂ + 4CO
We check to see if the expression is balanced and it is so;
Now;
Given;
1.8mole of C reacted; how many moles of CO are produced;
From the balanced reaction equation:
5 mole of C is expected to produce 4 mole of CO
1.8 mole of C will then produce [tex]\frac{4 x 1.8}{5}[/tex] = 1.44mole of CO
What is the mass of florine
Answer:
18.998403
is the mass
Select the correct answer. The perimeter of a rectangle is 42 inches. If the width of the rectangle is 6 inches, what is the length? A. 12 inches B. 15 inches C. 21 inches D. 40 inches
Answer:
15
I hope this helps
Write two sentences explaining how the illustration and student observations support the cell theory?
Answer:
The classical cell theory was proposed by Theodor Schwann in 1839. There are three parts to this theory.
Explanation:
22. Which of the following molecules or ions contain polar bonds?
In the image below if the frisbee represents lights, what does the fence represent?
Answer:
The atmosphere
Explanation:
It reflects and traps the light outside of the Earth's Atmosphere?
I think, hope i helped.
A buffer solution contains 0.0200 M acetic acid and 0.0200 M sodium acetate. What is the pH after 2.0 mmol of NaOH are added to 1.00 L of this buffer? pKa = 4.75 for acetic acid.
Answer:
The correct answer is 4.84
Explanation:
We use the Henderson Hasselbach's equation to calculate the pH of a buffer solution:
pH = pKa = log ( [conjugate base]/[weak acid])
In this case:
conjugate base: acetate ⇒ [conjugate base] = [acetate] = 0.0200 M
weak acid: acetic acid ⇒ [weak acid] = [acetic acid] = 0,0200 M
pH = pKa + log ([acetate]/[acetic acid])= pKa + log (0.0200 M/0.0200 M)
When a strong base- such as NaOH- is added, the acid reacts with OH⁻ to form the conjugate base. So, the conjugate base is increased while the acid is decreased. Thus, in 1 liter of solution we have:
acetate = (0,0200 mol/L x 1 L) + (2.0 mmol x 1 mol/1000 mmol) = 0.022 mol
acetic acid= (0,0200 mol/L x 1 L) - (2.0 mmol x 1 mol/1000 mmol) = 0.018 mol
Finally, we calculate the pH:
pH = 4.75 + log (0.022 mol /0.018 mol )= 4.84
Buffer has been the solution that resists the change in the pH of the solution with the addition of acid or base. The pH of buffer with NaOH has been 4.84.
What is pH?The pH has been the hydrogen ion concentration in the solution. The pH has been equivalent to pKa and can be given as:
[tex]\rm pka=log\dfrac{[base]}{[acid]}[/tex]
The base in the buffer has been the acetate, while acetic acid act as the acid.
The concentration of NaOH added to the solution has been given as:
[tex]\rm Molarity=\dfrac{moles}{volume}\\\\ NaOH=\dfrac{0.002\;mol}{1\;L}\\\\ NaOH=0.002\;M[/tex]
The addition of NaOH adds the concentration of base, and neutralization reduces the concentration of acid. Thus, the new pKa can be given as:
[tex]\rm pKa=log\dfrac{0.2+0.002}{0.2-0.002} \\pKa=log\dfrac{0.022}{0.018}[/tex]
The new pH of the solution has been the sum of the old and the new pKa value.
Thus, the pH of the new buffer has been given as:
[tex]\rm pH=4.75+log\dfrac{0.022}{0.018}\\ pH=4.84[/tex]
The pH of buffer with NaOH has been 4.84.
Learn more about buffer, here:
https://brainly.com/question/1423164
Calculate the following quantity: volume of 1.58 M calcium chloride that must be diluted with water
to prepare 994 mL of a 6.20 x 10^-2 M chloride ion solution.
what is the iupac name of CH3-CH2CH(CH3)CH2-COOH
Answer:
Butanoic acid.
Explanation:
What is the hydroxide concentration of a solution with a poH of 2? Is this solution acidic, basic or neutral?
A solution of NaF is added dropwise to a solution that is 0.0173 M in Ba 2. When the concentration of F- exceeds___M BaF2 will precipiate. Neglect volume changes. For BaF2
Answer:
0.0099M = [F⁻]
Explanation:
For BaF2, Ksp = 1.7x10⁻⁶
When BaF₂ is in solution, the equilibrium between the solid and the dissociated ions occurs as follows:
BaF₂(s) ⇄ Ba²⁺(aq) + 2F⁻(aq)
Where Ksp = 1.7x10⁻⁶ is defined as:
1.7x10⁻⁶ = [Ba²⁺] [F⁻]²
Where [] are equilibrium concentrations of each ion in solution.
That means you will add F⁻ until its concentration exceeds:
1.7x10⁻⁶ = [0.0173] [F⁻]²
9.827x10⁻⁵ = [F⁻]²
0.0099M = [F⁻]When more F⁻ is added, BaF₂ begins its precipitation.
An example of a suspension is a ____
A)chemical b)heterogenous
c)homogenous d)salad
Answer:
b
Explanation:
suspension is the heterogenos solution
what ore is turned to finished aluminum
Choose ALL the answers that apply.
Sound _____.
travels in transverse waves
requires a medium to travel through
travels most slowly through solids
speeds up when temperature is increased
is changed into electrical impulses by the cochlea
Answer:
Speeds up when temperature is increased and can travel through a solid
Explanation:
What is the charge on an atom after it gains two electrons during the formation of a bond?
One positive charge
Two positive charges
Two negative charges
One negative charge
Answer:
Two Negative Charges
Explanation:
C. Two negative charges
If an atom has an equal number of protons and electrons, its net charge is 0. If it gains an extra electron, it becomes negatively charged and is known as an anion. If it loses an electron, it becomes positively charged and is known as a cation.Given condition: An atom gains two electrons during the formation of a bond.
As we know gaining an electron results in a negative charge and here two electrons being gained.
Therefore, the charge on it after gaining two electrons will be two negative charges.
Thus, the correct option is option C.
Learn more:
brainly.com/question/7722404
List what you are thankful for! (It's Thanksgiving! Answer if you bake! Or if you like cakes pies cookies and treats!!! )
Answer:
I do not bake but my mom is a professional baker.
Explanation:
A roof over my head and a warm home.
Plenty of drinkable water.
I don't have to go hungry.
I can enjoy the small and free pleasures of life.
Access to the internet.
My friends and family.
My health.
The kindness of people I have never met before.
Please help me it’s due today
Answer:
I think it is A. the two forces are equal, or balanced, neither the table nor the book moves up or down.
Explanation:
Tome, the other options don’t make no sense
Why do some transition metals have multiple oxidation states?
Transition metals have multiple oxidation states because of their
sublevel.
Answer:
Transition metals can have multiple oxidation states because of their electrons. The transition metals have several electrons with similar energies, so one or all of them can be removed, depending the circumstances. This results in different oxidation states.
Answer:
The answers are "partially filled" and "d" on Plato
Explanation:
What is the ratio of potassium atoms to oxygen atoms in potassium oxide (K2O)?
K20
K = 1+
0 = 2-
K/0 = 1/2
the answer is K:O = 1:2
What electrically neutral atom has 30 neutrons and 25 electrons?
Answer:
Manganese (Mn)
Explanation:
We know it's manganese because we are told it is an electrically neutral atom. This means it has the same number of protons and electrons. If it has 25 electrons, it has 25 protons. Protons tell us the atomic number of the atom, which also tells us the name of the element. Manganese is element 25 on the periodic table.
If Phosphorus, P, gained 3 electrons, the net ion charge would be
+5
-5
+3
-3
Answer:
-3
Explanation:
Phosphorus becomes phosphide with a -3 charge