what volume, in ml, of concentrated 16 m nitric acid would you need to use in order to prepare 500.0 ml of a 0.250 m hno3(aq) solution? (formula mass of hno3

After thoroughly calculating, we have come to find that, the volume occupied by 5.44 g of oxygen gas (O2) at a pressure of 0.881 atm and a temperature of 27.4 C is  4.76 L.

The equation of state of an ideal gas, also known as the general gas equation, is the ideal gas law. Even though it has a number of restrictions, it is a good approximation of the behaviour of many gases under a variety of conditions. T

he empirical Boyle's law, Charles' law, Avogadro's law, and Gay-law Lussac's were all combined in Benoît Paul Émile Clapeyron's first formulation of it in 1834. Often, the empirical form of the ideal gas law is used:

PV is equal to nRT where n is the quantity and R is the ideal gas constant, where p, V, and T are the pressure, volume, and temperature. As accomplished by August Krönig in 1856 and Rudolf Clausius in 1857, it can also be derived from the microscopic kinetic theory.

To find the volume we will use the ideal gas law

PV = nRT

Where.

P = pressure

V = volume

n = amount of substance

R = ideal gas constant

T = temperature

Here, we have give pressure of  0.881 atm

Temperature of 27.4 C = (27.4+273) = 300.4 K

5.44 g of O₂ gas convert it into moles

Mass/Molar mass = No. of moles

5.44/32 = 0.17 mol

R = 0.0821 L atm K⁻¹ mol⁻¹

We need to find volume that is

V = nRT/P

    = (0.17 × 0.0821 × 300.4)/ 0.881

    = 4.76 L

Learn more about ideal gas law

https://brainly.com/question/15132707

#SPJ10

The transition in an excited hydrogen atom will emit the longest wavelength of light is E2 to E1. Thus option D is correct.

Transition is defined as a specific arrangement along the reaction coordinate.

It can also be defined as the condition corresponding to the maximum potential energy along this reaction coordinate is what is meant by this term.

d-block elements shows transition because they behave in a way that transitions between s-block and p-block components, the d-block elements are known as transition elements.

Transition in the elements occurs when the electrons come under excited state and travel form lower energy level to higher energy level.

Thus, the transition in an excited hydrogen atom will emit the longest wavelength of light is E2 to E1. Thus option D is correct.  

To learn more about transition, refer to the link below:

https://brainly.com/question/17998935

#SPJ1

The greatest about of transpiration will occur over a large forest with mature trees.

Transpiration is described because the physiological lack of water in the form of water vapor, especially from the stomata in leaves, but also thru evaporation from the surfaces of leaves, plants, and stems.

Transpiration is the system wherein plants release the water interior it inside the shape of moisture or water vapor. Roots eat some quantity of water from the soil and the rest evaporates inside the atmosphere. elements of plants consisting of stems, small pores on leaves, and plants evaporate the water to the environment.

Leaf stomata are the primary web sites of transpiration and encompass two defend cells that form a small pore on the surfaces of leaves. The defend cells control the opening and last of the stomata in reaction to various environmental stimuli and may alter the fee of transpiration to reduce water loss.

Learn more about transpiration here:- https://brainly.com/question/6899

#SPJ1

The amount of energy that must be supplied in the form of heat to 1 mole of substance to raise the temperature by 1 unit is -26.805kJ/mol.

Solution:

= 5.34 kJ/K * 0.31 K

= 1.655 joules kJ

mol of KSCN = mass/MW = 6.00/97.181

mol of KSCN = 0.0617404

= -Qsolutoin/mol = -1.655 /0.0617404 = -26.805kJ/mol.

Molar heat capacity is the amount of energy required to raise the temperature of one mole of a substance by one degree. to find the molar heat capacity of a compound or element, simply multiply the specific heat by the molar mass. The molar heat of the solution is the total energy change when a substance dissolves. KJ/MOL Measured in kilojoules/mole. Molar heat capacity is the amount of heat required to heat 1 mole of a substance to 1 Kelvin.

Learn more about Molar heat here:-https://brainly.com/question/15080895

#SPJ1

Answer:

You identify the limiting reactant by calculating the moles of product that can be formed from each reactant.

Explanation: Then you calculate the theoretical yield of product from the amount of the limiting reactant.

EXAMPLE Aspirin is prepared by the reaction between acetic anhydride and salicylic acid.

acetic anhydride + salicylic acid → aspirin + acetic acid

C 4 H 6 O 3 + C 7 H 7 O 3 → C 9 H 8 O 4 + C 2 H 4 O 2 m m A m l + m B m m → m l l C m l l + m l D

What is the theoretical yield of aspirin ( C ) if you reacted 4.32 g of acetic anhydride ( A ) with 2.00 g of salicylic acid ( B )?

Solution :

The molar masses are

Acetic anhydride = A = C 4 H 6 O 3 = 102.1 g/mol

Salicylic acid = B = C 7 H 6 O 3 = 138.1 g/mol

Aspirin = C = C 9 H 8 O 4 = 180.2 g/mol

Identify the limiting reactant We calculate the moles of each reactant and then use the molar ratios from the balanced equation to calculate the moles of aspirin.

Moles of aspirin from A = 4.32 g A × 1 mol A 102.1 g A × 1 mol C 1 mol A = 0.0423 mol C

Moles of aspirin from B = 2.00 g B × 1 mol B 138.1 g B × 1 mol C 1 mol B = 0.0145 mol C B gives the smaller amount of aspirin, so B is the limiting reactant.

Calculate the theoretical yield 0.0145 mol C × 180.2 g C 1 mol C = 2.61 g C

the Lewis dot diagram for lithium is

The molecule  xenon oxo tetrafluoride has five regions of electron density as shown in the image attached.

Let us recall that a compound can be found when the atoms of elements are combined together. The interesting fact about the compound that we have called  xenon oxo tetrafluoride is that the central atom in the compound is a noble gas.

We know that the noble gases are said to be unreactive. In this case, we can see from the image that is attached that there are five regions of electron density that surround the molecule and the there are no lone pairs on the xenon central atom.

Learn more about xenon oxo tetrafluoride:https://brainly.com/question/14524235

#SPJ1

16:32=1:2 hence the Law of Multiple Proportion holds true

According to the Law of Multiple Proportion, the mass of one element that is combined with a fixed mass of the second element will always be ratios of whole numbers when two components combine to generate more than one compound.

For illustration, suppose there are two molecules of CO (carbon monoxide) and CO 2. (carbon dioxide).

CO is equal to 12g of carbon and 16g of oxygen.

CO2 is made up of 12 grams of carbon and 32 grams of oxygen.

The two compounds are 16:32=1:2 in terms of the mass of oxygen.

This establishes the law of multiple proportions.

To know more about  Law of Multiple Proportion refer to https://brainly.com/question/14623004

#SPJ9

Answer:

Boron has different isotopes with different atomic masses. The relative atomic mass of boron, which is 9, is the average of the atomic masses of the isotopes

Explanation:

The relative atomic mass is indicated in terms of its heaviness compared to the parts of mass of carbon-12. The relative mass of boron is 9 means its mass relative to the mass of carbon -12 is 9 amu.

The relative atomic mass of an element is the mass relative to the mass of carbon-12 or it can be defined as the number which indicates how many times the mass of one atom of the element is heavier in comparison to (1/12)th part of the mass of one atom of carbon-12.

Usually the mass number of an atom is the sum of number of protons and number of neutrons. But the actual mass or average atomic  mass is not calculated in this way.

The actual mass is determined using mass spectroscopy. The relative atomic mass of every element is computed based on the mass of C-12 obtained from spectroscopic technique.

Thus the relative atomic mass of boron is calculated in a similar way and it is 9 amu.

To find more about relative atomic mass, refer the link below:

https://brainly.com/question/25698972

#SPJ2

Answer: The number of atoms = Avogadro's number = 6.022 × 10²³

Number of atoms in a mole = Avogadro's number = 6.022 × 10²³

Explanation:

1.

Mole = [tex]\frac{given mass}{molar mass}[/tex]

Also, Mole = [tex]\frac{Number of atoms/molecules/ions}{Avagadro's Number}[/tex]

∴  [tex]\frac{given mass}{molar mass}[/tex]  = [tex]\frac{Number of atoms/molecules/ions}{Avagadro's Number}[/tex]

[tex]\frac{12}{12}[/tex] = [tex]\frac{number of atoms}{Avogadro's number}[/tex]

number of atoms = Avogadro's number

number of atoms = 6.022 × 10²³

2.

Mole = [tex]\frac{Number of atoms/molecules/ions}{Avagadro's Number}[/tex]

1 =  [tex]\frac{Number of atoms/molecules/ions}{Avagadro's Number}[/tex]

number of atoms = Avogadro's number

number of atoms = 6.022 × 10²³

Molecular equation:

CrSO4(aq) + Ca(NO3)2 (aq) —> Cr(NO3)2(aq) + CaSO4(s)

Net ionic:

Ca2+(aq) + SO4(aq) —> CaSO4(s)

A balanced equation is another name for a chemical equation. Any ionic substances or acids are represented as neutral compounds in a molecular equation using their chemical formulae. Following the formula are parenthesis that describe each substance's condition.

A net ionic equation is often constructed using the fewest integer values for the stoichiometric coefficients. As a result, in order to obtain the net ionic equation's final form, it may occasionally be necessary to divide all of the stoichiometric coefficients by a single factor.

The spectator ions are also included in a complete ionic equation, whereas a net ionic equation just displays the chemical species that are engaged in a process. We are able to determine the net ionic equation for a specific

Learn more about Molecular equation here:

https://brainly.com/question/14286552

#SPJ4

Answer:

Living beings need survive for thinking,eating,and moving.

Answer:

Brain, mouth and legs

Explanation:

the following are needed for the above questions

Answer:

add a substace devider

Explanation:

i forgot what it was called but there is a chemical that allows the substances to seperste and than you can test the substaces ph and what it is

1. False, 2. True, 3. True, 4. False, 5. True, 6. False, 7. True, 8. False, 9.  Incomplete and 10. True.

1. Atoms have no weight - False

Atomic mass is the total mass of an atom. This is roughly equal to the total number of protons and neutrons with a small addition of electrons.

2. The electron is the heaviest part of the atom - in fact

3. All protons have the same mass - True

4. All atoms have the same mass - False

The mass of each element depends on the number of protons and neutrons it contains.

5. All neutrons have the same mass. - True

6. An oxygen atom weighs as much as a nitrogen atom. - False

o2 has a molecular weight of 15.9994 g/mol, and the molar mass of nitrogen is 14.0067 g/mol.

7. All oxygen atoms have the same mass - True

8. If we add neutrons and electrons to find the mass of an atom, the atomic mass of calcium is 40.08 - False

The number of protons and neutrons in an element determines its mass number. Protons and neutrons are the mass numbers.

9. The circular mass is 41, which is not quite correct.

10. Isotopes are identical atoms with differing numbers of protons. - True

Learn more about the atoms at

https://brainly.com/question/28577022?referrer=searchResults

#SPJ9

If a 0.692-g sample of glucose, c6h12o6, is burned in a constant volume calorimeter, then the amount of heat evolved per mole of glucose is 2.88 x [tex]10^{6}[/tex] J/mol

For the given reaction, the amount of heat evolved can be calculated by dividing the amount of heat evolved by the number of moles.

The formula for heat evolved is

[tex]q_{m}[/tex] = [tex]\frac{q}{n}[/tex]

Now use heat transfer equation to express q

q = [tex]mc_{w}[/tex]ΔT + [tex]c_{c}[/tex] ΔT

Where m is the mass, ΔT change of temperature and [tex]c_{w}[/tex] is the specific heat, and [tex]c_{c}[/tex] specific heat of calorimeter.

The number of moles and mass of glucose can be expressed as

n = [tex]m_{g} /MW[/tex]

We are given the following values:

m = 575 g

cw = 4.184 J/gK

ΔT = 25.33 − 21.70 = 3.63 K

[tex]c_{c}[/tex] = 650 J/K

MW = 180.156 g /mol

[tex]m_{g}[/tex] = 0.692 g

Now the solution will be

[tex]q_{m}[/tex]  = q/n

m[tex]c_{w}[/tex]ΔT + [tex]c_{c}[/tex]ΔT/ [tex]\frac{m}{MW}[/tex]

[tex]q_{m}[/tex] = (575 g) (4.164 J/g ∘C) (3.63K) + (650 J/K)(3.63K)/[tex]\frac{0.692g}{180.56 g/mol}[/tex]

[tex]q_{m}[/tex] = 2.88 x [tex]10^{6}[/tex] J/mol

Thus the quantity of heat evolved per mole of glucose is 2.88 x [tex]10^{6}[/tex] J/mol

If you need to learn more about glucose click here:

https://brainly.com/question/3380149

#SPJ4

Kinetic energy does a hydroelectric dam capture as the water passes through

The most common type of hydroelectric power plant is an impoundment facility and an impoundment facility is a typically a large hydropower system and the uses a dam to store river water in a reservoir and the water released from the reservoir flows through a turbine and spinning it and which in turn activates a generator to produce electricity and then there are many types of hydropower facilities through they are all powered by the kinetic energy of flowing water as it moves downstream

Know more about hydroelectric dam

https://brainly.com/question/14946631

#SPJ1

Answer:

mechanical energy

Explanation:

smart answer :)

The moles of the gas when a cylinder contains 30.0 l of oxygen gas at a pressure of 1.9 atm and a temperature of 310 K is 2.2

The ideal gas equation is PV=nRT. P is the pressure, V is the volume, n is the number of moles and T is the temperature

Substituting the values, we get

1.9x30=nx0.0821x310

n=2.2(two significant figures)

To learn more about the ideal gas visit:

brainly.com/question/28257995

#SPJ4

Answer:

So there is a physical version of it.

The concentration of the dilute solution when in the laboratory you dilute 4.59 ml of a concentrated 6.00 m hydrobromic acid solution to a total volume of 175 ml is 0.157 M

Now, using the formula, we get

Substituting the values, we get

M=6.00

V=4.59 mL=4.59x10^-3 L

n=6.00x(4.59x10^-3L)

n=27.54x10^-3 L

The new molarity is Mnew=n/Vnew

Mnew= 27.54x10^-3  V=175 mL=175x10^-3 L

Mnew=27.54x10^-3 mol/175x10^-3 L

Mnew=0.157 M

To learn more about molarity visit:

brainly.com/question/2817451

#SPJ4

The graph below shows the densities of the elements in Group 0 of the periodic table.

What is periodic table?
The chemical elements are shown in tabular form on the periodic table, commonly referred to as the periodic table of the (chemical) elements. It is frequently used in physics, chemistry, and other sciences and is frequently regarded as a symbol of chemistry. It is a visual representation of the periodic law, which claims that the atomic numbers of chemical elements have a roughly periodic relationship with their attributes. The table is divided into four blocks that are about rectangular in shape. The table's columns are referred to as groups and its rows are known as periods.

The trend in density is that the density increases as you move down Group 0. This is because the elements in Group 0 are all noble gases. The noble gases are all gases at room temperature and pressure. The reason for this is that the noble gases all have full outer shells of electrons. This means that the attractive forces between the nuclei and the electrons are very weak. The noble gases are all very unreactive because of this. The reason that the density increases as you move down Group 0 is because the atoms get larger as you move down the group. The larger the atom, the more massive it is. This means that the atoms are more likely to collide with each other, and so the density of the gas increases.

To learn more about periodic table
https://brainly.com/question/15987580
#SPJ9

Carbonic anhydrases are a class of zinc containing enzymes that catalyze the conversion of carbon dioxide into bicarbonate ions.

Carbonic anhydrases are a kind of enzyme that catalyzes the interconversion of carbon dioxide, water, and carbonic acid dissociated ions. Most carbonic anhydrases have a zinc ion in their active site. As a result, they are classed as metalloenzymes. Carbonic anhydrase is an enzyme that aids in the quick interconversion of carbonic acid, protons, and bicarbonate ions from carbon dioxide and water.

Carbonic anhydrase is present in the blood, gastrointestinal mucosa, and a trace amount in plasma. Carbonic anhydrase enzymes catalyze the conversion of water and carbon dioxide to carbonic acid dissociated ions. This results in the formation of bicarbonate anions, which dissolve in the blood plasma.

Learn more about Carbonic anhydrases here:

https://brainly.com/question/9733478

#SPJ4

Difference between crystallization and evaporation to dryness : crystallization is the formation of solid crystal from liquid whereas evaporation is the formation of vapor from liquid.

Crystallization is defined as the the process in which pure solid separates in the form of crystal from solution .

Evaporation to dryness is  used to separate solute thermally when soluble solid does not decompose on heating. crystallization is better than evaporation to dryness because in the process of evaporation some solid in the mixture get decomposed leaving impurities. during the process of evaporation.

The major difference is that in crystallization is the formation of solid crystal from liquid whereas evaporation is the formation of vapor from liquid.

To learn more about crystallization and evaporation here

https://brainly.com/question/13175930

#SPJ1

Geologic maps are most recognized by their contour lines, which represent different elevations. Option C

This is further explained below.

Generally, A geologic map, also known as a geological map, is a specialized map that is drawn out for the purpose of illustrating different geological phenomena.

The various rock units and geologic layers may be represented by different colors or symbols.

contour line: A curve along which a function has a constant value represents a contour line for a function with two variables.

This means that the curve unites points that have the same value at each point along the curve. It is a segment of the plane that is parallel to the plane that is taken from the three-dimensional graph of the function f.

Read more about Geologic maps

https://brainly.com/question/5634603

#SPJ1

The cell’s pressure potential or ψp is 2.44 bars if the cell contains 0.6M glucose at 20°c with its surrounding solution containing 0.5M glucose.

As;

ψoutside = ψcell ( here ψ represents water potential)

Therefore;

ψp outside + ψs outside = ψp cell + ψs cell ( Since, ψ = ψp + ψs)

As ψs = -iCRT, therefore

0 + (-iCRT outside) = ψp cell + (-iCRT cell)

In iCRT, i represents the ionization constant

C represents the Molar concentration

R represents the Pressure constant 0.0831 liter bars/mole at degrees Kelvin

T represents temperature (degree kelvin)

Substituting the values;

(-1)(0.5M)(0.0831)(20 + 273) = ψp - (1)(0.6M)(0.0831)(20 +273)

-12.17 = ψp cell - 14.61

ψp cell = (-12.17) + 14.61

ψp cell = 2.44 bars

Therefore, the cell’s pressure potential (ψp) is calculated to be 2.44 bars if the cell contains 0.6M glucose at 20°c with its surrounding solution containing 0.5M glucose.

To learn more about pressure potential (ψp), click here:

https://brainly.com/question/15690592

#SPJ4

The aluminum halide is used to increase the electrophilicity of the halogen, in electrophilic aromatic substitutions which is unnecessary because acetanilide is a very good nucleophile.

In electrophilic aromatic substitutions, the aromatic ring acts as the nucleophile, while the other component (halogen, alkyl halide, acyl halide, etc.) acts as the electrophile. The halogen molecules are not great electrophiles, so aluminum halide is added to facilitate the reaction.

However, the nucleophilicity of the aromatic ring can be increased through resonance and inductive effects of the substituents, and in acetanilide the electron-donating amide group is effective enough to make the aromatic ring a good enough nucleophile to, in turn, make the use of aluminum halide unnecessary.

You can learn more about electrophilic aromatic substitutions here:

brainly.com/question/28286554

#SPJ4

According to the given statement 0.3345 M  is the molarity of the Ba(OH)₂ solution.

The quantity of a substance in a specific solution volume is known as its molarity (M). The amount of moles of a solute every litre of a solution is referred to as molarity. The molecular concentration of a solution is another name for molarity.

Ba(OH)₂+  2HCl ⇒ BaCl₂ + H₂O

Ratio of moles Ba(OH)₂ ,  

HCl  = 1:2

Amount of HCl consumed

= 0.500/1000*66.90

= 0.03345 mol

So Ba(OH)₂ reacted = 1/2 * 0.03345 mol

If  molarity of Ba(OH)₂ is x then

x/1000*50 = 1/2 * 0.03345

x =  0.3345 M.

To know more about Molarity visit:

https://brainly.com/question/8732513

#SPJ13

The functional group with the COOH setting is called Carboxylic acid, which is a type of organic acid, whereas Esters will have COOR representation, Aldehydes wl l be OCH and Alcohols OH, therefore the answer will be number 4