What type of electromagnetic radiation is being shown in the picture?

A. Gamma rays
B. Ultraviolet radiation
C. X-rays
D. Infrared radiation

Answer:

dasd

Explanation:

dsdas

Answer:

A local tsunami is one that originates from within about 100 km or less than 1 hour tsunami travel time from the impacted coastline. Local tsunamis can result in a significant number of casualties since authorities have little time to warn/evacuate the population.

Explanation:

Hope this helps

The answer is A. velocity .

Velocity is a vector quantity because it need magnitude as well as direction to be defined.

Explanation:

I couldn't have information on this question.

Answer:

1. B. The person and the Earth

2. This is because the energy gained by the person equals the energy lost by the earth,

Explanation:

1.

B. The person and the Earth

This is because the person and the earth both represent a system. A system consists of more than one item. A system consists of two or more items interacting with each other.

2. This is because, the energy of an isolated system is conserved according to the second law of thermodynamics which states that in an isolated system, energy can neither be created nor destroyed. So, there is an exchange of energy between the person and the Earth. So, the energy gained by the person at the new height equals the energy lost by the earth. And thus, the total energy of the system remains constant.

Answer:

1. b. The door is exerting a centripetal force on you that balances the centrifugal force of the turn.

2. b. There is no net force acting on the object.

Explanation:

1. This is because as you move to the right due to the centrifugal force of the turn, a corresponding centripetal force acts on you due to the door which does not allow you fall out of the car since, the door is exerting a centripetal force on you that balances the centrifugal force of the turn.

So, the answer is b

2. This is because, since the object moves at a constant speed and thus does not accelerate, no net force can act on it since, a net force would imply that the object accelerates. Note that a constant speed does not imply that no force acts on it. It only shows that the resultant or net force is zero since the object does not accelerate.

So, there is no net force acting on the object.

So, b is the answer.

Answer:

1-1=0

Explanation:

ahriqqwertyuioo

Answer:

Distance is 300 and displacement is 100

Explanation:

Distance= 100+100+100=300

Displacement=100

plz mark me as brainliest.

Answer:

the maximum voltage induced in the coil is 2.574 × 10⁻⁵ V

Explanation:

Given the data in the question;

Number of turns N = 10

major axis Ma = 13 cm = 0.13 m

a = 0.13/2 = 0.065 m

Minor axis Mi = 6 cm = 0.06 m

b = 0.06/2 = 0.03 m

we know that; 1 RPM = 0.10472 rad/s

rate of rotation R = 73rpm = 7.64 rad/s

Magnetic field = 55 uT

we know that, Area of ellipse = π × a × b

we substitute

A = π × 0.065 m × 0.03 m

A = 0.006126 m²

so

Maximum Voltage = N × Area × Magnetic field × rate of reaction

we substitute

Maximum Voltage = 10 × 0.006126 × ( 55 × 10⁻⁶ ) × 7.64

Maximum Voltage = 2.574 × 10⁻⁵ V

Therefore, the maximum voltage induced in the coil is 2.574 × 10⁻⁵ V

Answer:

[tex]0.261\ \text{m}[/tex]

Explanation:

[tex]\Delta f[/tex] = Change in frequency = 2.1 Hz

[tex]f[/tex] = Frequency of source of sound = 440 Hz

[tex]v_m[/tex]= Maximum of the microphone

[tex]v[/tex] = Speed of sound = 343 m/s

[tex]T[/tex] = Time period = 2 s

We have the relation

[tex]\Delta f=2f\dfrac{v_m}{v}\\\Rightarrow v_m=\dfrac{\Delta fv}{2f}\\\Rightarrow v_m=\dfrac{2.1\times 343}{2\times 440}\\\Rightarrow v_m=0.8185\ \text{m/s}[/tex]

Amplitude is given by

[tex]A=\dfrac{v_m T}{2\pi}\\\Rightarrow A=\dfrac{0.8185\times 2}{2\pi}\\\Rightarrow A=0.261\ \text{m}[/tex]

The amplitude of the simple harmonic motion is [tex]0.261\ \text{m}[/tex].

Answer:

Distance A:11km

B:10km

Explanation:

Displacement A and B is 9km

Answer:

The small intestine absorbs most of the nutrients in your food, and your circulatory system passes them on to other parts of your body to store or use. Special cells help absorbed nutrients cross the intestinal lining into your bloodstream.

Explanation:

Answer: hetero i think i dont know

Explanation:

Answer:

When two substances that cannot dissolve each other are mixed, a mixture is formed.

i hope this helps a little bit.

Answer: A. It gives off a range of wavelengths of electromagnetic radiation that depends on its temperature.

Explanation: Quizzed

Answer:

The solubility of KNO3 at 50 degrees C is 83 g/100 g water.

Explanation:

when u see the graph and by using graph reading techniques then u find the solubility.

Answer:

Hello! Your answer would be, O False

Explanation:

Hope I helped! Brainiest plz!♥ Have a nice morning! Hope you make a 100%! -Abby

Answer:

False is the correct answer.

Explanation:

plz mark me as brainliest.

Answer:

Acceleration of the car = 5.51 m/s²

Explanation:

Given:

Initial speed of car = 0 m/s

Final speed of car = 27 m/s

Time taken by car = 4.9 seconds

Find:

Acceleration of the car

Computation:

Using first equation of motion

v = u + at

Where

v = Final velocity

u = Initial velocity

t = Time taken

a = Acceleration

So,

v = u + at

27 = 0 + a(4.9)

a(4.9) = 27

a = 5.51 m/s²

Acceleration of the car = 5.51 m/s²

Mimicry. This is when oraganisms imitate another oraganism whether it be physical or behavoioral.

Answer:

the correct result is L = 0.319 m

Explanation:

This system is a physical pendulum whose angular velocity is

         w² = [tex]\frac{M \ g \ d}{I}[/tex]

where d is the distance from the center of mass to the point of rotation and I is the moment of inertia of the system

The Moment of Inertia is a scalar, therefore an additive quantity

          I = I_bar + I_disk

the moment of inertia of each element with respect to the pivot point can be found with the parallel axes theorem

let's use M for the mass of the bar and m for the mass of the disk

Bar

          I_bar = I_{cm} + Md²

the moment of inertia of the center of mass is

          I_{cm} = [tex]\frac{1}{12}[/tex] M L²

the distance from the center of mass

           d = L / 2

we substitute

         I_bar = [tex]\frac{1}{12}[/tex] M L² + M ([tex]\frac{L^2}{4}[/tex])

Disk

          I_disk = I_{cm} + m d²

moment of inertia of the center of mass

          I_{cm} = ½ m R²

the distance d is

         d = L

we substitute

          I_disk = 1/2 m R² + m L²

the total moment of inertia is

          I = [tex]\frac{1}{12}[/tex] M L² +[tex]\frac{1}{4}[/tex] M L² + [tex]\frac{1}{2}[/tex] m r² + m L²

          I = [tex]\frac{1}{4}[/tex] M L² + m L² + ½ m r²

          I = L² (m + [tex]\frac{1}{4}[/tex] M) + ½ m r²

The position of the center of mass of the system can be found with the expressions

         d_{cm} = [tex]\frac{1}{M} \sum r_i m_i[/tex]

         d_{cm} = [tex]\frac{1}{m+M} \ ( M \frac{L}{2} + m L)[/tex]

         d_{cm} = [tex]L \frac{m + M/2}{m +M }[/tex]

now we can substitute in the expression for the angular velocity

         w² = (m + M) g  L  [tex]\frac{m + \frac{M}{2} }{m+M}[/tex]   [tex]\frac{1}{L^2 (m+ \frac{M}{4} ) + \frac{1}{2} m r^2 }[/tex]

         w² = g (m + [tex]\frac{1}{2}[/tex] M)   [tex]\frac{L}{ L^2 ( m +\frac{1}{4} M ) + \frac{1}{2} m r^2}[/tex]

angular velocity and period are related

         w = 2π/T

sustitute

        4π²/T² =   g (m + [tex]\frac{1}{2}[/tex] M)   [tex]\frac{L}{ L^2 ( m +\frac{1}{4} M ) + \frac{1}{2} m r^2}[/tex]  

         L² (m + [tex]\frac{1}{4}[/tex] M)  + ½ m r² =  [tex]\frac{T^2}{4 \pi ^2 } \ g ( m + \frac{1}{2} M ) \ \ L[/tex]

we substitute the values ​​and solve the second grade equation

          L² (0.1 + [tex]\frac{1}{4}[/tex] 0.3) - [[tex]\frac{1^2}{4\pi ^2}[/tex]  9.8 (0.1 + 0.3/2) ]  L + ½ 0.1 0.2² = 0

          L² 0.175 - 0.06206 L + 0.002 = 0

the equation remains after simplifying

          L² - 0.3546 La + 0.01143 = 0

solve us

           L = [tex]\frac{0.3546 \ \pm \sqrt{ 0.3546^2 - 4 \ 0.01143 }}{2}[/tex]

           L = [tex]\frac{0.3546 \ \pm \ 0.28288 }{2}[/tex]

           L₁ = 0.319 m

           L₂ = 0.036m

the correct result must have a value greater than the radius of the disk.  The correct result is L = 0.319 m

Answer:

The correct solution is "1.2 m".

Explanation:

The given values are:

Wavelength of waves,

λ = 1.5 m

Speed of waves on surface,

V = 2 m/sec

Speed of waves in water,

V₁ = 1.6 m/sec

As we know,

⇒  [tex]V=f\times \lambda[/tex]

or,

⇒  [tex]f=\frac{V}{\lambda}[/tex]

On substituting the values, we get

⇒      [tex]=\frac{2}{1.5}[/tex]

⇒      [tex]=1.33 \ Hz[/tex]

hence,

⇒  [tex]\lambda_1=\frac{V_1}{f}[/tex]

On substituting the values, we get

⇒       [tex]=\frac{1.6}{1.33}[/tex]

⇒       [tex]=1.2 \ m[/tex]

Answer:

1. Positive

2. Negative

3. induction

4. Insulator

5. Voltage

6. Static energy

7. Positive, Negative

8. Resistance

9. Increase

Would appreciate if you mark me as brainliest answer

1. Protons have positive electric charge and electrons have negative electric charge.

2. Opposite charges attract and like charges repel.

3. Charging by induction is the rearrangement of electrons on a neutral object caused by a nearby charged object.

4. Insulator are materials that do not allow electric current to pass through easily.

5. Voltage is the accumulation of electrical charges on on object.

6.Current is usually the flow of static electricity.

7. Charges flow from positive voltage to negative voltage.

8. The tendency of material to oppose the flow of electron is called resistance.

9. Making wires thinner, longer or hotter Increase the resistance.

The current is the stream of charges which flow from positive to negative terminal of voltage source.  

Voltage is the collection or storage of charges. Resistance of the circuit is the opposition to the flow of current.

Charging a neutral object is done by induction. Like charges repel each other and unlike charges attract each other. The electron are positive charged and proton are positive charged.

Learn more about current.

https://brainly.com/question/27206933

#SPJ2

Answer:

[tex]10.54\ \text{rad/s}[/tex]

Explanation:

[tex]\omega_i[/tex] = Initial angular velocity = 500 rpm = [tex]500\times \dfrac{2\pi}{60}\ \text{rad/s}[/tex]

[tex]\omega_f[/tex] = Final angular velocity

t = Time = 34 s

[tex]\theta[/tex] = Angular displacement = 170 revs = [tex]170\times 2\pi\ \text{rad}[/tex]

[tex]\alpha[/tex] = Angulr acceleration

From the kinematic equations of angular motion we have

[tex]\theta=\omega_it+\dfrac{1}{2}\alpha t^2\\\Rightarrow \alpha=\dfrac{\theta-\omega_it}{\dfrac{1}{2}t^2}\\\Rightarrow \alpha=\dfrac{170\times 2\pi-500\times \dfrac{2\pi}{60}\times 34}{\dfrac{1}{2}\times 34^2}\\\Rightarrow \alpha=-1.23\ \text{rad/s}^2[/tex]

[tex]\omega_f=\omega_i+\alpha t\\\Rightarrow \omega_f=500\times \dfrac{2\pi}{60}+(-1.23)\times 34\\\Rightarrow \omega_f=10.54\ \text{rad/s}[/tex]

The rate at which the wheel is spinning when the power comes back on is [tex]10.54\ \text{rad/s}[/tex].

Answer:

becouse most of nuclear elements are heave

Explanation:

Answer:

5.45 moles

Explanation:

The chemical balanced equation of this reaction is;

3Si + 2N2 → Si3N4

From the balanced equation, we can see that that 3 moles of Si reacts with 2 moles of N2 to produce 1 mole of Si3N4.

Thus imies that the molar ration of Si to N2 is 3:2.

Now, we are told that 16.35 moles of Si reacts with 11.26 moles of N2.

16.35

Thus, using the ratio 3:2, we can say that moles of 16.35 miles of Si will react completely with (16.35 × ⅔) = 10.9 moles of N2.

Remaining N2 = 11.26 - 10.9 = 0.36 will be the excess.

From our balanced chemical equation, we saw that;

3 moles of Si produced 1 mole of Si3N4.

Thus; 16.35 moles of Si will produce;

no. of moles of Si3N4 produced = (1 × 16.35)/(3.0) = 5.45 moles

Answer:

6.75 v

Explanation: