Answer:
What Study Design method was used in the situation?
Scenario: A psychology professor is trying to determine if people in a heightened state of fear tend to have
negative views of society. The professor has 200 participants and divides them into groups based on both race
and gender. The professor then selects names from each group and places them into either the study group or
control group. The participants placed in the study group are shown scary movies then asked a series of
questions about how they feel about different societal issues. The participants placed in the control group are
asked how they feel about different societal issues.
A) Simulation
B) Experiment
C) Observational Study
D) Questionnaire
Answer:
A is the answer just you the process of elimination
Can you please Find x I’m trying to finish before school ends
Answer:
-7.35
Step-by-step explanation:
7/x = cos(60)
x = 7(cos(60))
x = 7/(-0.95)
x = -7.35
B is the midpoint of AC, what in the measure of AB if AC 82cm?
Answer:
AB = 41 cm
Step-by-step explanation:
If B is the midpoint of AC, then B splits AC into 2 equal halves: AB & BC.
Therefore, AB = ½ of AC.
Given, AC = 82 cm.
So,
AB = ½ × AC
AB = 82/2
AB = 41 cm
_____
Hope it helps ⚜
Help finish this work I keep doing but the answer is still wrong
7. Hunter has a choice between 2 pizzas: a circular pizza with a 10-inch diameter, and a square pizza with a 9-inch side. Which statement below is true? O The pizzas have the same area. The area of the square pizza is larger. The area of the circular pizza is 100 square inches The area of the circular pizza is larger.
Answer:
(b) The area of the square pizza is larger
Step-by-step explanation:
The areas can be computed using the appropriate formulas, then compared.
__
circular pizzaA = πr² . . . . . r = half the diameter
A = π(5 in)² = 25π in² ≈ 78.5 in²
square pizzaA = s² . . . . . s is the side length
A = (9 in)² = 81 in²
The area of the square pizza (81 in²) is larger than that of the circular pizza (78.5 in²).
PLEADE HELP??????????????
Answer:
A
Step-by-step explanation:
because for combinatioj order are no imoortant
Round each fraction to help you estimate the solution for the following equation: nine tenths minus four tenths equals 0 one half 1 one and one half
Answer:
1/2
Step-by-step explanation:
9/10 - 4/10 = (9-4) / 10 = 5/10 = 1/2
Answer:
9/10 - 4/10 = 5/10 (0.5) zero and a half.
Step-by-step explanation:
The denominators are the same so you only need to subract 4 from nine, you could even simplify it after by dividing the top of the fraction and the bottom by the same number. goodluck btw
Please show work and thank you
Answer: [tex]4\sqrt{7}[/tex]
Step-by-step explanation:
If [tex]AC=16, DC=7[/tex], then this means [tex]AD=9[/tex].
So, by the geometric mean theorem, [tex]DB=\sqrt{(9)(7)}=\sqrt{63}[/tex].
This means that by the Pythagorean theorem, [tex]BC=\sqrt{\left(\sqrt{63} \right)^{2}+7^{2}}=\boxed{4\sqrt{7}}[/tex]
All of the following countries were impacted by Chernobyl EXCEPT...
A. Great Britain
B. Brazil
C. Norway
Answer:
B: Brazil
Step-by-step explanation:
The Chernobyl impacted Belarus, Russia, and Ukraine as well as many other European countries. And Brazil isnt a European country.
( I hoped this helped)
A manufacturer inspects 1000 cars and finds that 988 cars have no defects. What is the experimental probability that a car chosen at random will have no defects? If there are 2500 cars in a company, predict the number of cars that are likely to have no defects.
The experimental probability is the number of cars with no defect/ total cars inspected: 988/100 = 0.988
multiply total cars by experimental probability
2500 x 0.988 = 2470
Answer:
98.8%; 2470 cars
Step-by-step explanation:
2*5-1/2*10*9 answer will be 45
Write the quadratic equation whose roots are -1 and -4, and whose leading coefficient is 4. (Use the letter x to represent the variable.)
Answer:
4x² + 20x + 16 = 0
Step-by-step explanation:
Quadratic equation:(leading coefficient) * [x² - (sum of roots)*x + product of roots] = 0
4* [x² - ( -1 -4)x + (-1)*(-4) ] = 0
4*[ x² - (-5)x + 4] = 0
4 * [x² + 5x + 4] = 0
4*x² + 4*5x + 4*4 = 0
4x² + 20x + 16 = 0
What is the range of this data set? {5, 12, 15, 11, 15, 7, 15, 10, 13}
8
10
12
15
Answer:
B) 10
Step-by-step explanation:
The range of a data set is found by subtracting the smallest term given in the set from the largest term given in the set. First, set the terms in order from least to greatest:
5 , 7 , 10 , 11 , 12 , 13 , 15 , 15, 15 ,
Subtract the greatest (15) with the least (5): 15 - 5 = 10
B) 10 is your answer.
~
Answer:
The answer is b) 10
Step-by-step explanation:
i took the test
binomial distribution
Answer:
Using the binomial distribution, it is found that
P(X > 3) = 0.0256
Step-by-step explanation:
Binomial probability distribution
The binomial probability is the probability of exactly x successes on n repeated trials, with p probability.
[tex]P(X = x) = C_{n, x} * p^{x} (1 - p)^{n- x }[/tex]
[tex]C_{n, x}[/tex] is the number of different combinations of x objects from a set of n elements, given by:
[tex]C_{n, x} = \frac{n!}{p!(n - x)!}[/tex]
Binomial distribution:In this question, we have that n = 4, p = 0.4The desired probability is:P(X > 3) = P(X = 4) since it above next whole number above 3
In which
[tex]P(X = x) = C_{n, x} * p^{x} (1 - p)^{n- x }[/tex]
[tex]P(X = 4) = C_{4, 4} * (0.4)^{4} (1 - 0.4)^{4 - 4}\\C_{4, 4} = \frac{4!}{4!(4 - 4)!}\\\\P(X = 4) = \frac{4!}{4!(0)!} * (0.4)^{4} (0.6)^{0}\\[/tex]
Then
P(X > 3) = P(X = 4)
P(X > 3) = 0.0256
--------------
Given, n = 4, p = 0.4
in your calculator:press 2nd - DISTR
scroll down to A: binompdf( - press enter
type in # of trials (n), P: (probability), and x value (successes)
press enter on Paste
press enter again
excel/sheets:BINOMDIST(num_successes, num_trials, prob_success, cumulative)
=BINOMDIST(4, 4, 0.4, FALSE
A similar problem is given at brainly.com/question/15557838
I have also attached notes on The Binomial Distribution below
Let me know if you have any questions !
Hope this helps :)
- In the 1940s, the U.S. Department of Commerce reported a new way to test the tensile
strength, in pounds per square inch, of concrete. Several samples of concrete specimens
were used to estimate the mean tensile strength of 430 pounds per square inch with a
margin of error of 10 pounds per square inch. After the study was published, another
group proposes to run the same test on concrete specimens but with samples including
many more concrete specimens in each sample. (2 points)
Which of these statements is most likely to be true about the second study?
A. The estimated mean will be greater than 440 pounds per square inch.
B. The margin of error for the second study will likely be around 10 pounds per square inch.
C. The margin of error for the second study will likely be greater than 10 pounds per square inch.
D. The margin of error for the second study will likely be less than 10 pounds per square inch.
Using the Central Limit Theorem, it is found that the statement that is likely to be true about the second study is given by:
D. The margin of error for the second study will likely be less than 10 pounds per square inch.
What does the Central Limit Theorem states?It states that the sampling distribution of sample means of size n has standard error [tex]s = \frac{\sigma}{\sqrt{n}}[/tex].
That is, higher sample sizes leads to lower amounts of error, and since the second study has a higher sample size, it should have lower error, hence option D is correct.
More can be learned about the Central Limit Theorem at https://brainly.com/question/24663213
#SPJ1
How many numbers between 1 and 100 (inclusive) are divisible by 10 and 77?
Answer:
none
Step-by-step explanation:
The only number in the range 1 to 100 that is divisible by 77 is 77. It is not divisible by 10.
No numbers in the range 1 to 100 are divisible by both 10 and 77.
I don't understand. Help please.
Answer:
the H stands for hours. the E stands for money. because it says 10h that means she gets $10 per hour. that answers the first question. I don't understand the second part though. hope you get it!
What is the equation of the line that is perpendicular to
keeping in mind that perpendicular lines have negative reciprocal slopes, let's check for the slope of the equation above
[tex]y = \stackrel{\stackrel{m}{\downarrow }}{-\cfrac{3}{4}}x+6 ~~ \impliedby \begin{array}{|c|ll} \cline{1-1} slope-intercept~form\\ \cline{1-1} \\ y=\underset{y-intercept}{\stackrel{slope\qquad }{\stackrel{\downarrow }{m}x+\underset{\uparrow }{b}}} \\\\ \cline{1-1} \end{array}[/tex]
therefore then
[tex]\stackrel{~\hspace{5em}\textit{perpendicular lines have \underline{negative reciprocal} slopes}~\hspace{5em}} {\stackrel{slope}{\cfrac{-3}{4}} ~\hfill \stackrel{reciprocal}{\cfrac{4}{-3}} ~\hfill \stackrel{negative~reciprocal}{-\cfrac{4}{-3}\implies \cfrac{4}{3}}}[/tex]
so we're really looking for the equation of a line whose slope is 4/3 and passes through (3 , 9)
[tex](\stackrel{x_1}{3}~,~\stackrel{y_1}{9})\hspace{10em} \stackrel{slope}{m} ~=~ \cfrac{4}{3} \\\\\\ \begin{array}{|c|ll} \cline{1-1} \textit{point-slope form}\\ \cline{1-1} \\ y-y_1=m(x-x_1) \\\\ \cline{1-1} \end{array}\implies y-\stackrel{y_1}{9}=\stackrel{m}{\cfrac{4}{3}}(x-\stackrel{x_1}{3}) \\\\\\ y-9=\cfrac{4}{3}x-4\implies y=\cfrac{4}{3}x+5[/tex]
HELP ME PLEASE!!!!!!!
I will help you back!!!!
Is 0 03 less than or greater than 0.32
is 5.91 greater or less than 5.01
Is 3.73 greater or less than 3.83
4.
Let the cost function f of the unusual planet that orbit the earth is given as follows:
Vx+c² - c
f(x)=
c>0
x
I
(a)
Find the domain of f?
(b) Explain how can you define ſ so that it is continuous at x=0?
b
(a)The domain of the function is, [tex]\rm x \geq -c^2 \ x\neq0[/tex]
(b)The given function is discontinuous at x=0.
What is the domain and range of a function?
Domain is the set of values for which the given function is defined. Range is the set of all values which the given function can output.
The standard function is;
[tex]\rm f(x)= \frac{\sqrt{x+c^2-c} }{x} , c > 0[/tex]
The domain of the given function is found as;
[tex]\rm x+c^2 \geq 0 \ x\neq 0 \\\\ x\geq-c^2 \ x\neq 0[/tex]
The domain of the function is,
[tex]\rm x \geq -c^2 \ x\neq0[/tex]
To find the function is continuous or not, we have to find the continuity;
[tex]\rm f(x) = \frac{\sqrt{ x+c^2-c}}{x} ,c > 0[/tex]
At x= 0 the function is undefined. So that the function is discontinuous at x=0.
Hence, The domain of the function is, [tex]\rm x \geq -c^2 \ x\neq0[/tex] and the function is discontinuous at x=0.
To learn more about domain, refer to the link:
https://brainly.com/question/20073127
#SPJ1
The person is lifting a heavy box using a lever what is the purpose of the lever in the situation?
====================================
[tex]\large \sf \underline{Problem:}[/tex]
The person is lifting a heavy box using a lever what is the purpose of the lever in the situation?
====================================
[tex]\large \sf \underline{Answer:}[/tex]
to reduce the force needed to lift the box and change the direction of the force.
====================================
[tex]\large \sf \underline{Explanation:}[/tex]
1. "A lever consists of a rigid bar that is able to pivot at one point. This point of rotation is known as the fulcrum. A force is applied at some point away from the fulcrum (typically called the effort)."
By this definition, we know that force is needed to lift an object using a lever.
2. "When the input and output forces are on opposite sides of the fulcrum, the lever changes the direction of the applied force. This occurs only with first-class levers. When both the input and output forces are on the same side of the fulcrum, the direction of the applied force does not change"
For example, on a sew saw, if a force is applied on one end, you on the other side/end would go up, meaning a change in direction.
3. Lastly, we know a lever is typically used to reduce work, in other words, the force needed to move something.
Basically, if we were to put a lever into an equation:
reduced force + change in direction = lever
(the expection) unless load and force are on the same side, there will be no change in direction.
For example, if you and your friend sit on the same side of a sew saw, the sew saw would not go up or down, meaning no change in direction.
So if not stated otherwise you can assume the load and force are on opposite sides. The purpose of a lever in that situation would be to reduce the force needed to lift the box and change the direction of the force.
*While reading my explanation, it may be helpful to look up a diagram containing a lever, with a load, fulcrum, and applied force.
====================================
[tex]╰┈➤\: \huge\color{pink}{\bold{Answer}}[/tex]
To reduce the force needed to lift the box and change the direction of the force[tex] \: \: [/tex]
[tex]╰┈➤\: \huge\color{pink}{\bold{Explanation}}[/tex]
A lever consists of a rigid bar that is able to pivot at one point This point of rotation is known as the fulcrum A force is applied at some point away from the fulcrum (typically called the effort)[tex]\color{pink}──────────────────────────────[/tex]
[tex]\mathfrak \red{ - \: Cherrrry \: Red}[/tex]
Drag each expression to the correct location on the table.
Simplify each exponential expression using the properties of exponents and match it to the correct answer.
answers from left
1. 1
2. 1/2
3. 2
4. 1
A triangle has a base length of 2ac2 and a height 6 centimeters more than the base length. Find the area of the triangle if a = 4 and c = 2.
The area of the triangle with the given base and height where a = 4 and c = 2 is: 608 cm²
What is the Area of a Triangle?Area = 1/2(base)(height).
Given the parameters:
Base length = 2ac² cmHeight = 2ac² + 6 cmIf a = 4 and c = 2, then:
Area = 1/2(base)(height) = 1/2(2ac²)(2ac² + 6)
Area = 1/2(2 × 4 × 2²)(2 × 4 × 2² + 6)
Area = 1/2(32)(38)
Area = 608 cm²
Learn more about the area of a triangle on:
https://brainly.com/question/21735282
#SPJ1
5 km= _ m I don't understand
5000
Step-by-step explanation:Measurements can be given in multiple units. Unit conversion is important, especially when dealing with formulas because sometimes only specific units work.
Metric System
In this case, the question is asking about kilometers (km) and meters (m), both of which are in the metric system. Unit conversions are easier in the metric system because it uses prefixes that give you extra information. Each of the prefixes means a different number.
Milli - 1/1000thCenti - 1/100thDeci - 1/10thDeca - 10Kilo - 1000These are not all of the possible prefixes, but they are the most common. This means that a decameter represents 10 meters and 1 millimeter is 1/1000 of a meter.
Conversion
Using the prefixes above, we can tell that 1 kilometer is 1000 meters. So, we can multiply whatever amount of kilometers we have by 1000. This will gives the number of meters.
5 * 1000 = 5000Thus, 5 km = 5000 m.
Write the equation of the line that passes through the points (4,-5)(4,−5) and (4,-7)(4,−7). Put your answer in fully simplified point-slope form, unless it is a vertical or horizontal line.
well, it's a vertical line, so, Check the picture below.
The dot plot below shows the hourly rate of some babysitters in a city:
A number line is shown from 1 dollar to 7 dollars in increments of 1 dollar for each tick mark. The horizontal axis label is Dollar per hour. There are 4 dots above 4 dollars, 2 dots above 5 dollars, 3 dots above 6 dollars, and 1 dot above 7 dollars. The title of the line plot is Babysitting Rates.
Which statement best describes the shape of the data?
It is a cluster from $1.00 to $7.00 and has no gaps.
It is a cluster from $1.00 to $7.00 and has gaps.
It is not symmetric and has a peak at $4.00.
It is symmetric and has a peak at $7.00.
PLEASE JUST SAY A B C OR D DONT NEED TO EXPLAIN JUST PUT ONE AND YOU WILL GET BRAINLIEST :DDD
Answer:
It is a cluster from $1.00 to $7.00 and
has no gaps.
Step-by-step explanation:
Answer:
A
Step-by-step explanation:
Question 6
What would you do to isolate the variable in the equation below using only one step?
x +4= 10
what transformation of figure 1 results and figure 2?
reflection
dialation
translation
Geometry is so hard help me!
Answer:
x = 2√5
Step-by-step explanation:
Isosceles right angle triangles have two congruent sides ( for more reference , kindly check the attached image ) making it a special 45-45-90 degree triangle.
Special triangles have simple easy rules to help identify the lengths of the other sides lengths. For the 45-45-90 degree triangle, the hypotenuse (longest side) is equal to the value of the triangles leg(shorter sides) times √2 ( for more reference kindly check the other attached image )
Here, the value of the leg it equal to √10
If the value of the hypotenuse (x) = leg × √2
Then the value of x = √10 × √2
x = √10 × √2 = √(10 × 2) = √20
==> simplify radical
x = 2√5
During which year(s) did Henry collect more coins than Chris?
Answer:
Step-by-step explanation:
1. Henry - 800. Chris - 600. 800 + 600 = 1,400 coins · 2. henry - 600. Chris - 400. 600 - 400 = 200 coins · 3. because henry has 800 chris
A borrower has been approved for a loan of $5,000 at 8% interest. The loan will be repaid in nine months. What amount will be repaid at that time?
Answer:
Just multiply 5000 * 0.08, which equals 400.
400 + 5000 = 5400
The borrower will repay $5400 at the end of nine months.
Step-by-step explanation: